* [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b
@ 2019-02-09 0:26 Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 1/2] ARM: dts: meson8: add the internal clock measurer Martin Blumenstingl
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Martin Blumenstingl @ 2019-02-09 0:26 UTC (permalink / raw)
To: linux-amlogic, khilman; +Cc: Martin Blumenstingl, devicetree, linux-arm-kernel
The 32-bit Amlogic Meson SoCs also have a "clock measurer", just like
the newer 64-bit ones.
Add the node of the clock measurer to meson8.dtsi and meson8b.dtsi
so we can see the measured clock frequencies in:
/sys/kernel/debug/meson-clk-msr/
Martin Blumenstingl (2):
ARM: dts: meson8: add the internal clock measurer
ARM: dts: meson8b: add the internal clock measurer
arch/arm/boot/dts/meson8.dtsi | 5 +++++
arch/arm/boot/dts/meson8b.dtsi | 5 +++++
2 files changed, 10 insertions(+)
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: dts: meson8: add the internal clock measurer
2019-02-09 0:26 [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Martin Blumenstingl
@ 2019-02-09 0:26 ` Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 2/2] ARM: dts: meson8b: " Martin Blumenstingl
2019-02-15 23:01 ` [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Kevin Hilman
2 siblings, 0 replies; 5+ messages in thread
From: Martin Blumenstingl @ 2019-02-09 0:26 UTC (permalink / raw)
To: linux-amlogic, khilman; +Cc: Martin Blumenstingl, devicetree, linux-arm-kernel
The Amlogic Meson8 SoC has an internal clock measurer IP which allows
measuring frequencies of various clock paths.
Enable it on meson8.dtsi so we can use it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index c9bd46120cb5..d83c6e96ace8 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -345,6 +345,11 @@
status = "disabled";
};
+ clock-measure@8758 {
+ compatible = "amlogic,meson8-clk-measure";
+ reg = <0x8758 0x1c>;
+ };
+
pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0x9880 0x10>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: meson8b: add the internal clock measurer
2019-02-09 0:26 [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 1/2] ARM: dts: meson8: add the internal clock measurer Martin Blumenstingl
@ 2019-02-09 0:26 ` Martin Blumenstingl
2019-02-15 23:01 ` [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Kevin Hilman
2 siblings, 0 replies; 5+ messages in thread
From: Martin Blumenstingl @ 2019-02-09 0:26 UTC (permalink / raw)
To: linux-amlogic, khilman; +Cc: Martin Blumenstingl, devicetree, linux-arm-kernel
The Amlogic Meson8b SoC has an internal clock measurer IP which allows
measuring frequencies of various clock paths.
Enable it on meson8b.dtsi so we can use it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 7cec76158856..e7d5512c0608 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -294,6 +294,11 @@
status = "disabled";
};
+ clock-measure@8758 {
+ compatible = "amlogic,meson8b-clk-measure";
+ reg = <0x8758 0x1c>;
+ };
+
pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0x9880 0x10>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b
2019-02-09 0:26 [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 1/2] ARM: dts: meson8: add the internal clock measurer Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 2/2] ARM: dts: meson8b: " Martin Blumenstingl
@ 2019-02-15 23:01 ` Kevin Hilman
2019-02-17 14:04 ` Martin Blumenstingl
2 siblings, 1 reply; 5+ messages in thread
From: Kevin Hilman @ 2019-02-15 23:01 UTC (permalink / raw)
To: Martin Blumenstingl, linux-amlogic
Cc: Martin Blumenstingl, devicetree, linux-arm-kernel
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> The 32-bit Amlogic Meson SoCs also have a "clock measurer", just like
> the newer 64-bit ones.
>
> Add the node of the clock measurer to meson8.dtsi and meson8b.dtsi
> so we can see the measured clock frequencies in:
> /sys/kernel/debug/meson-clk-msr/
Queued up, probably for v5.2, unless I get one more late PR in
(unlikely.)
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b
2019-02-15 23:01 ` [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Kevin Hilman
@ 2019-02-17 14:04 ` Martin Blumenstingl
0 siblings, 0 replies; 5+ messages in thread
From: Martin Blumenstingl @ 2019-02-17 14:04 UTC (permalink / raw)
To: Kevin Hilman; +Cc: linux-amlogic, linux-arm-kernel, devicetree
Hi Kevin,
On Sat, Feb 16, 2019 at 12:02 AM Kevin Hilman <khilman@baylibre.com> wrote:
>
> Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
>
> > The 32-bit Amlogic Meson SoCs also have a "clock measurer", just like
> > the newer 64-bit ones.
> >
> > Add the node of the clock measurer to meson8.dtsi and meson8b.dtsi
> > so we can see the measured clock frequencies in:
> > /sys/kernel/debug/meson-clk-msr/
>
> Queued up, probably for v5.2, unless I get one more late PR in
> (unlikely.)
that's fine for me - thank you!
Regards
Martin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-02-17 14:05 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-09 0:26 [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 1/2] ARM: dts: meson8: add the internal clock measurer Martin Blumenstingl
2019-02-09 0:26 ` [PATCH 2/2] ARM: dts: meson8b: " Martin Blumenstingl
2019-02-15 23:01 ` [PATCH 0/2] ARM: dts: add the clock measurer on Meson8/Meson8b Kevin Hilman
2019-02-17 14:04 ` Martin Blumenstingl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).