linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com, wens@csie.org,
	linux-sunxi@googlegroups.com
Cc: alsa-devel@alsa-project.org, Marcus Cooper <codekipper@gmail.com>,
	lgirdwood@gmail.com, linux-kernel@vger.kernel.org,
	be17068@iperbole.bo.it, broonie@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations
Date: Wed, 14 Aug 2019 08:08:42 +0200	[thread overview]
Message-ID: <20190814060854.26345-4-codekipper@gmail.com> (raw)
In-Reply-To: <20190814060854.26345-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 73 +++++++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 24 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 7c37b6291df0..34f31439ae7b 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -127,8 +127,6 @@ struct sun4i_i2s;
  * @has_chsel_offset: SoC uses offset for selecting dai operational mode.
  * @reg_offset_txdata: offset of the tx fifo.
  * @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
  * @field_clkdiv_mclk_en: regmap field to enable mclk output.
  * @field_fmt_wss: regmap field to set word select size.
  * @field_fmt_sr: regmap field to set sample resolution.
@@ -150,8 +148,6 @@ struct sun4i_i2s_quirks {
 	bool				has_chsel_offset;
 	unsigned int			reg_offset_txdata;	/* TX FIFO */
 	const struct regmap_config	*sun4i_i2s_regmap;
-	unsigned int			mclk_offset;
-	unsigned int			bclk_offset;
 
 	/* Register fields for i2s */
 	struct reg_field		field_clkdiv_mclk_en;
@@ -212,7 +208,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
 	{ .div = 8, .val = 3 },
 	{ .div = 12, .val = 4 },
 	{ .div = 16, .val = 5 },
-	/* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+	{ .div = 0, .val = 0 },
+	{ .div = 1, .val = 1 },
+	{ .div = 2, .val = 2 },
+	{ .div = 4, .val = 3 },
+	{ .div = 6, .val = 4 },
+	{ .div = 8, .val = 5 },
+	{ .div = 12, .val = 6 },
+	{ .div = 16, .val = 7 },
+	{ .div = 24, .val = 8 },
+	{ .div = 32, .val = 9 },
+	{ .div = 48, .val = 10 },
+	{ .div = 64, .val = 11 },
+	{ .div = 96, .val = 12 },
+	{ .div = 128, .val = 13 },
+	{ .div = 176, .val = 14 },
+	{ .div = 192, .val = 15 },
 };
 
 static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +238,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
 	{ .div = 12, .val = 5 },
 	{ .div = 16, .val = 6 },
 	{ .div = 24, .val = 7 },
-	/* TODO - extend divide ratio supported by newer SoCs */
 };
 
 static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
 				  unsigned int oversample_rate,
-				  unsigned int word_size)
+				  unsigned int word_size,
+				  const struct sun4i_i2s_clk_div *bdiv,
+				  unsigned int size)
 {
 	int div = oversample_rate / word_size / 2;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
-		const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+	for (i = 0; i < size; i++) {
 		if (bdiv->div == div)
 			return bdiv->val;
+		bdiv++;
 	}
 
 	return -EINVAL;
@@ -247,16 +261,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
 static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
 				  unsigned int oversample_rate,
 				  unsigned int module_rate,
-				  unsigned int sampling_rate)
+				  unsigned int sampling_rate,
+				  const struct sun4i_i2s_clk_div *mdiv,
+				  unsigned int size)
 {
 	int div = module_rate / sampling_rate / oversample_rate;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
-		const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+	for (i = 0; i < size; i++) {
 		if (mdiv->div == div)
 			return mdiv->val;
+		mdiv++;
 	}
 
 	return -EINVAL;
@@ -321,24 +336,36 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 		return -EINVAL;
 	}
 
-	bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
-					  word_size);
+	if (i2s->variant->has_fmt_set_lrck_period)
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+						  word_size,
+						  sun8i_i2s_clk_div,
+						  ARRAY_SIZE(sun8i_i2s_clk_div));
+	else
+		bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+						  word_size,
+						  sun4i_i2s_bclk_div,
+						  ARRAY_SIZE(sun4i_i2s_bclk_div));
 	if (bclk_div < 0) {
 		dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
 		return -EINVAL;
 	}
 
-	mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
-					  clk_rate, rate);
+	if (i2s->variant->has_fmt_set_lrck_period)
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate,
+						  sun8i_i2s_clk_div,
+						  ARRAY_SIZE(sun8i_i2s_clk_div));
+	else
+		mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+						  clk_rate, rate,
+						  sun4i_i2s_mclk_div,
+						  ARRAY_SIZE(sun4i_i2s_mclk_div));
 	if (mclk_div < 0) {
 		dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
 		return -EINVAL;
 	}
 
-	/* Adjust the clock division values if needed */
-	bclk_div += i2s->variant->bclk_offset;
-	mclk_div += i2s->variant->mclk_offset;
-
 	regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
 		     SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
 		     SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -994,8 +1021,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
 	.has_reset		= true,
 	.reg_offset_txdata	= SUN8I_I2S_FIFO_TX_REG,
 	.sun4i_i2s_regmap	= &sun8i_i2s_regmap_config,
-	.mclk_offset		= 1,
-	.bclk_offset		= 2,
 	.has_fmt_set_lrck_period = true,
 	.has_chcfg		= true,
 	.has_chsel_tx_chen	= true,
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-14  6:10 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-14  6:08 [PATCH v5 00/15] ASoC: sun4i-i2s: Updates to the driver codekipper
2019-08-14  6:08 ` [PATCH v5 01/15] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper
2019-08-14  6:43   ` Maxime Ripard
2019-08-14 11:24     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 02/15] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper
2019-08-14  7:09   ` Maxime Ripard
2019-08-16  6:27     ` Code Kipper
2019-08-14  9:30   ` Mark Brown
2019-08-16  6:22     ` Code Kipper
2019-08-14  6:08 ` codekipper [this message]
2019-08-14  7:13   ` [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations Maxime Ripard
2019-08-14  9:31   ` Mark Brown
2019-08-14  6:08 ` [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs codekipper
2019-08-14  7:16   ` Maxime Ripard
2019-08-14 11:23     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 05/15] ASoC: sun4i-i2s: Add functions for RX and TX channel offsets codekipper
2019-08-14  6:08 ` [PATCH v5 06/15] ASoC: sun4i-i2s: Add functions for RX and TX channel enables codekipper
2019-08-14  6:08 ` [PATCH v5 07/15] ASoC: sun4i-i2s: Add functions for RX and TX channel selects codekipper
2019-08-14  6:08 ` [PATCH v5 08/15] ASoC: sun4i-i2s: Add functions for channel mapping codekipper
2019-08-14  6:08 ` [PATCH v5 09/15] clk: sunxi-ng: h6: Allow I2S to change parent rate codekipper
2019-08-21  4:07   ` [linux-sunxi] " Chen-Yu Tsai
2019-08-21  5:52     ` Code Kipper
2019-08-21  6:01       ` Chen-Yu Tsai
2019-08-21  9:19   ` Code Kipper
2019-08-21  9:35     ` [linux-sunxi] " Chen-Yu Tsai
2019-08-14  6:08 ` [PATCH v5 10/15] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible codekipper
2019-08-14  6:08 ` [PATCH v5 11/15] ASoC: sun4i-i2s: Add support for H6 I2S codekipper
2019-08-14  7:57   ` Jernej Škrabec
2019-08-14 11:08     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 12/15] ASoC: sun4i-i2s: Add multi-lane functionality codekipper
2019-08-14  7:20   ` Maxime Ripard
2019-08-14 11:16     ` Code Kipper
2019-08-14  8:27   ` [linux-sunxi] " Jernej Škrabec
2019-08-14  6:08 ` [PATCH v5 13/15] ASoC: sun4i-i2s: Add multichannel functionality codekipper
2019-08-14  6:08 ` [PATCH v5 14/15] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper
2019-08-14  8:28   ` [linux-sunxi] " Jernej Škrabec
2019-08-14  9:03     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 15/15] ASoC: sun4i-i2s: Adjust regmap settings codekipper
2019-08-14  7:20   ` Maxime Ripard
2019-08-14 11:31     ` [linux-sunxi] " Jernej Škrabec
2019-08-14  8:37   ` [linux-sunxi] " Jernej Škrabec
2019-08-14  9:02     ` Code Kipper
2019-08-14 11:31   ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190814060854.26345-4-codekipper@gmail.com \
    --to=codekipper@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=be17068@iperbole.bo.it \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).