From: Maxime Ripard <maxime.ripard@bootlin.com>
To: codekipper@gmail.com
Cc: alsa-devel@alsa-project.org, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org, lgirdwood@gmail.com,
be17068@iperbole.bo.it, wens@csie.org, broonie@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs
Date: Wed, 14 Aug 2019 09:16:45 +0200 [thread overview]
Message-ID: <20190814071645.33qe7bvwpbakjg2e@flea> (raw)
In-Reply-To: <20190814060854.26345-5-codekipper@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 4892 bytes --]
On Wed, Aug 14, 2019 at 08:08:43AM +0200, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
>
> There is a need to support more formats on the newer SoCs(H3 and later).
> Extend the formats supported to include DSP_A and DSP_B modes.
>
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
> sound/soc/sunxi/sun4i-i2s.c | 87 +++++++++++++++++++++++++++----------
> 1 file changed, 63 insertions(+), 24 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index 34f31439ae7b..3553c17318b0 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -27,6 +27,8 @@
> #define SUN4I_I2S_CTRL_MODE_MASK BIT(5)
> #define SUN4I_I2S_CTRL_MODE_SLAVE (1 << 5)
> #define SUN4I_I2S_CTRL_MODE_MASTER (0 << 5)
> +#define SUN4I_I2S_CTRL_PCM BIT(4)
> +#define SUN4I_I2S_CTRL_LOOP BIT(3)
> #define SUN4I_I2S_CTRL_TX_EN BIT(2)
> #define SUN4I_I2S_CTRL_RX_EN BIT(1)
> #define SUN4I_I2S_CTRL_GL_EN BIT(0)
> @@ -91,6 +93,9 @@
> /* Defines required for sun8i-h3 support */
> #define SUN8I_I2S_CTRL_BCLK_OUT BIT(18)
> #define SUN8I_I2S_CTRL_LRCK_OUT BIT(17)
> +#define SUN8I_I2S_CTRL_MODE_RIGHT_J (2 << 0)
> +#define SUN8I_I2S_CTRL_MODE_I2S_LEFT_J (1 << 0)
> +#define SUN8I_I2S_CTRL_MODE_PCM (0 << 0)
>
> #define SUN8I_I2S_FMT0_LRCK_PERIOD_MASK GENMASK(17, 8)
> #define SUN8I_I2S_FMT0_LRCK_PERIOD(period) ((period - 1) << 8)
> @@ -164,6 +169,7 @@ struct sun4i_i2s_quirks {
>
> s8 (*get_sr)(const struct sun4i_i2s *, int);
> s8 (*get_wss)(const struct sun4i_i2s *, int);
> + int (*set_format)(struct sun4i_i2s *, unsigned int);
> };
>
> struct sun4i_i2s {
> @@ -194,6 +200,7 @@ struct sun4i_i2s {
>
> unsigned int tdm_slots;
> unsigned int slot_width;
> + unsigned int offset;
> };
>
> struct sun4i_i2s_clk_div {
> @@ -484,19 +491,14 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> i2s->slot_width : params_width(params));
> }
>
> -static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> +static int sun4i_i2s_set_format(struct sun4i_i2s *i2s, unsigned int fmt)
> {
> - struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> u32 val;
> - u32 offset = 0;
> - u32 bclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
> - u32 lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
>
> /* DAI Mode */
> switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> case SND_SOC_DAIFMT_I2S:
> val = SUN4I_I2S_FMT0_FMT_I2S;
> - offset = 1;
> break;
> case SND_SOC_DAIFMT_LEFT_J:
> val = SUN4I_I2S_FMT0_FMT_LEFT_J;
> @@ -505,32 +507,64 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> val = SUN4I_I2S_FMT0_FMT_RIGHT_J;
> break;
> default:
> - dev_err(dai->dev, "Unsupported format: %d\n",
> - fmt & SND_SOC_DAIFMT_FORMAT_MASK);
> return -EINVAL;
> }
>
> - if (i2s->variant->has_chsel_offset) {
> - /*
> - * offset being set indicates that we're connected to an i2s
> - * device, however offset is only used on the sun8i block and
> - * i2s shares the same setting with the LJ format. Increment
> - * val so that the bit to value to write is correct.
> - */
> - if (offset > 0)
> - val++;
> - /* blck offset determines whether i2s or LJ */
> - regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> - SUN8I_I2S_TX_CHAN_OFFSET_MASK,
> - SUN8I_I2S_TX_CHAN_OFFSET(offset));
> + regmap_field_write(i2s->field_fmt_mode, val);
> +
> + return 0;
> +}
> +
> +static int sun8i_i2s_set_format(struct sun4i_i2s *i2s, unsigned int fmt)
> +{
> + u32 val;
>
> - regmap_update_bits(i2s->regmap, SUN8I_I2S_RX_CHAN_SEL_REG,
> - SUN8I_I2S_TX_CHAN_OFFSET_MASK,
> - SUN8I_I2S_TX_CHAN_OFFSET(offset));
> + /* DAI Mode */
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S:
> + i2s->offset = 1;
> + case SND_SOC_DAIFMT_LEFT_J:
> + val = SUN8I_I2S_CTRL_MODE_I2S_LEFT_J;
> + break;
> + case SND_SOC_DAIFMT_RIGHT_J:
> + val = SUN8I_I2S_CTRL_MODE_RIGHT_J;
> + break;
> + case SND_SOC_DAIFMT_DSP_A:
> + i2s->offset = 1;
> + case SND_SOC_DAIFMT_DSP_B:
> + val = SUN8I_I2S_CTRL_MODE_PCM;
> + break;
> +
> + default:
> + return -EINVAL;
> }
>
> + /*
> + * bclk offset determines whether i2s or LJ if in i2s mode and
> + * DSP_A or DSP_B if in PCM mode.
> + */
> + i2s->variant->set_txchanoffset(i2s, 0);
> + i2s->variant->set_rxchanoffset(i2s);
> +
> regmap_field_write(i2s->field_fmt_mode, val);
It's a bit more complicated in the sun8i case. The LRCK period also
needs to be changed when in PCM / DSP_* mode since it changes from a
number of periods for one channel to a number of periods for all the
channels.
I have patches that still need a bit of rework and take care of all of
that, I'll try to post them by the end of the week
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-14 11:12 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-14 6:08 [PATCH v5 00/15] ASoC: sun4i-i2s: Updates to the driver codekipper
2019-08-14 6:08 ` [PATCH v5 01/15] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper
2019-08-14 6:43 ` Maxime Ripard
2019-08-14 11:24 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 02/15] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper
2019-08-14 7:09 ` Maxime Ripard
2019-08-16 6:27 ` Code Kipper
2019-08-14 9:30 ` Mark Brown
2019-08-16 6:22 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations codekipper
2019-08-14 7:13 ` Maxime Ripard
2019-08-14 9:31 ` Mark Brown
2019-08-14 6:08 ` [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs codekipper
2019-08-14 7:16 ` Maxime Ripard [this message]
2019-08-14 11:23 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 05/15] ASoC: sun4i-i2s: Add functions for RX and TX channel offsets codekipper
2019-08-14 6:08 ` [PATCH v5 06/15] ASoC: sun4i-i2s: Add functions for RX and TX channel enables codekipper
2019-08-14 6:08 ` [PATCH v5 07/15] ASoC: sun4i-i2s: Add functions for RX and TX channel selects codekipper
2019-08-14 6:08 ` [PATCH v5 08/15] ASoC: sun4i-i2s: Add functions for channel mapping codekipper
2019-08-14 6:08 ` [PATCH v5 09/15] clk: sunxi-ng: h6: Allow I2S to change parent rate codekipper
2019-08-21 4:07 ` [linux-sunxi] " Chen-Yu Tsai
2019-08-21 5:52 ` Code Kipper
2019-08-21 6:01 ` Chen-Yu Tsai
2019-08-21 9:19 ` Code Kipper
2019-08-21 9:35 ` [linux-sunxi] " Chen-Yu Tsai
2019-08-14 6:08 ` [PATCH v5 10/15] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible codekipper
2019-08-14 6:08 ` [PATCH v5 11/15] ASoC: sun4i-i2s: Add support for H6 I2S codekipper
2019-08-14 7:57 ` Jernej Škrabec
2019-08-14 11:08 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 12/15] ASoC: sun4i-i2s: Add multi-lane functionality codekipper
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 11:16 ` Code Kipper
2019-08-14 8:27 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 6:08 ` [PATCH v5 13/15] ASoC: sun4i-i2s: Add multichannel functionality codekipper
2019-08-14 6:08 ` [PATCH v5 14/15] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper
2019-08-14 8:28 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 9:03 ` Code Kipper
2019-08-14 6:08 ` [PATCH v5 15/15] ASoC: sun4i-i2s: Adjust regmap settings codekipper
2019-08-14 7:20 ` Maxime Ripard
2019-08-14 11:31 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 8:37 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 9:02 ` Code Kipper
2019-08-14 11:31 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814071645.33qe7bvwpbakjg2e@flea \
--to=maxime.ripard@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=be17068@iperbole.bo.it \
--cc=broonie@kernel.org \
--cc=codekipper@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).