[PATCHv7 0/3] Variscite DART-6UL SoM support

[PATCHv7 0/3] Variscite DART-6UL SoM support

[Oliver Graute]

This patch series adds support for the Variscite DART-6UL SoM

Product Page: https://www.variscite.com/product/evaluation-kits/dart-6ul-kits

Oliver Graute (3):
  ARM: dts: imx6ul: Add Variscite DART-6UL SoM support
  ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard
  dt-bindings: arm64: fsl: Add Variscite i.MX6UL compatibles

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 .../boot/dts/imx6ul-imx6ull-var-dart-common.dtsi   | 367 +++++++++++++++++++++
 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts    | 221 +++++++++++++
 4 files changed, 590 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv7 1/3] ARM: dts: imx6ul: Add Variscite DART-6UL SoM support

[Oliver Graute]

This patch adds support for the i.MX6UL variant of the Variscite DART-6UL
SoM Carrier-Board

Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Marco Felsch <m.felsch@pengutronix.de>
---
Changelog:

v7:
 - removed cpu0 node
 - fixed phy problem

v6:
 - renamed touch regulator
 - renamed rmii clock
 - moved some muxing to baseboard
 - added pinctrl for gpio key
 - added bus-width to usdhc1
 - fixed missing subnode on partitions

 .../boot/dts/imx6ul-imx6ull-var-dart-common.dtsi   | 376 +++++++++++++++++++++
 1 file changed, 376 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
new file mode 100644
index 00000000..b3cd928
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	clk_rmii_ref: clock-rmii-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "rmii-ref";
+	};
+
+	reg_touch_3v3: regulator-touch-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_3v3_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_gpio_dvfs: regulator-gpio {
+		compatible = "regulator-gpio";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-name = "gpio_dvfs";
+		regulator-type = "voltage";
+		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		states = <1300000 0x1 1400000 0x0>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-reset-gpios=<&gpio5 10 1>;
+	phy-reset-duration=<100>;
+	phy-reset-on-resume;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			micrel,rmii-reference-clock-select-25-mhz;
+			clocks = <&clk_rmii_ref>;
+			clock-names = "rmii-ref";
+			reg = <1>;
+		};
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			micrel,rmii-reference-clock-select-25-mhz;
+			clocks = <&clk_rmii_ref>;
+			clock-names = "rmii-ref";
+			reg = <3>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+
+	nand@0 {
+
+		partition@0 {
+			label = "spl";
+			reg = <0x00000000 0x00200000>;
+		};
+
+		partition@200000 {
+			label = "uboot";
+			reg = <0x00200000 0x00200000>;
+		};
+
+		partition@400000 {
+			label = "uboot-env";
+			reg = <0x00400000 0x00200000>;
+		};
+
+		partition@600000 {
+			label = "kernel";
+			reg = <0x00600000 0x00800000>;
+		};
+
+		partition@e00000 {
+			label = "rootfs";
+			reg = <0x00e00000 0x3f200000>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT    0x03029
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x1b0b1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x78b0
+		>;
+	};
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Oliver Graute]

This patch adds DeviceTree Source for the i.MX6 UltraLite DART NAND/WIFI

Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Marco Felsch <m.felsch@pengutronix.de>
---
Changelog:

v7
 - fixed wakeup-source

v6:
 - added some muxing
 - added codec in sound node
 - added adc1 node

 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 221 ++++++++++++++++++++++++
 2 files changed, 222 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index df2e1f2..65fac53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -583,6 +583,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
+	imx6ul-var-6ulcustomboard.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
new file mode 100644
index 00000000..5b88aad
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Support for Variscite DART-6UL Module
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
+ * Copyright (C) 2018-2019 Oliver Graute <oliver.graute@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ul-imx6ull-var-dart-common.dtsi"
+
+/ {
+	model = "Variscite i.MX6 UltraLite Carrier-board";
+	compatible = "variscite,6ulcustomboard", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 20000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user {
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		d16-led {
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8731audio";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Jack",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line Jack",
+			"RLINEIN", "Line Jack",
+			"MICIN", "Mic Bias",
+			"Mic Bias", "Mic Jack";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_touch_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	wm8731: audio-codec@1a {
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_SAI2>;
+		clock-names = "mclk";
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency =<35000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <48>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
+		>;
+	};
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] dt-bindings: arm64: fsl: Add Variscite i.MX6UL compatibles

[Oliver Graute]

Add the compatibles for Variscite i.MX6UL compatibles
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index f79683a..d0c7e60 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -182,6 +182,7 @@ properties:
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
               - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - variscite,6ulcustomboard" # i.MX UltraLite Carrier-board
           - const: fsl,imx6ul
 
       - description: Kontron N6310 S Board
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] dt-bindings: arm64: fsl: Add Variscite i.MX6UL compatibles

[Fabio Estevam]

Hi Oliver

On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> Add the compatibles for Variscite i.MX6UL compatibles

You missed your Signed-off-by tag.

Also, you should remove arm64 from the Subject line as this is a 32-bit SoC :-)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] dt-bindings: arm64: fsl: Add Variscite i.MX6UL compatibles

[Oliver Graute]

On 12/11/19, Fabio Estevam wrote:
> Hi Oliver
> 
> On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> >
> > Add the compatibles for Variscite i.MX6UL compatibles
> 
> You missed your Signed-off-by tag.
> 
> Also, you should remove arm64 from the Subject line as this is a 32-bit SoC :-)

thx, you are right I messed thinks up. Because I also working with
another 64-bit SoC in parallel.  

I'll fix it soon

Best regards,

Oliver

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/3] dt-bindings: arm: fsl: Add Variscite i.MX6UL compatibles

[Oliver Graute]

Add the compatibles for Variscite i.MX6UL compatibles

Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index f79683a..d0c7e60 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -182,6 +182,7 @@ properties:
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
               - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - variscite,6ulcustomboard" # i.MX UltraLite Carrier-board
           - const: fsl,imx6ul
 
       - description: Kontron N6310 S Board
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Fabio Estevam]

Hi Oliver,

On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@gmail.com> wrote:

> +&lcdif {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_lcdif>;
> +       display = <&display0>;
> +       status = "okay";
> +
> +       display0: display0 {
> +               bits-per-pixel = <16>;
> +               bus-width = <24>;
> +
> +               display-timings {
> +                       native-mode = <&timing0>;
> +                       timing0: timing0 {
> +                               clock-frequency =<35000000>;
> +                               hactive = <800>;
> +                               vactive = <480>;
> +                               hfront-porch = <40>;
> +                               hback-porch = <40>;
> +                               hsync-len = <48>;
> +                               vback-porch = <29>;
> +                               vfront-porch = <13>;
> +                               vsync-len = <3>;
> +                               hsync-active = <0>;
> +                               vsync-active = <0>;
> +                               de-active = <1>;
> +                               pixelclk-active = <0>;
> +                       };
> +               };
> +       };
> +};

You are using the deprecated bindings.

Please switch to the DRM bindings as stated at
Documentation/devicetree/bindings/display/mxsfb.txt

You should also add your panel to the simple panel driver.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/3] dt-bindings: arm: fsl: Add Variscite i.MX6UL compatibles

[Fabio Estevam]

On Tue, Nov 12, 2019 at 6:25 PM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> Add the compatibles for Variscite i.MX6UL compatibles
>
> Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index f79683a..d0c7e60 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -182,6 +182,7 @@ properties:
>                - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
>                - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
>                - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
> +              - variscite,6ulcustomboard" # i.MX UltraLite Carrier-board

I guess what you mean is:

variscite,imx6ul-var-6ulcustomboard # i.MX6 UltraLite Carrier-board

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv7 1/3] ARM: dts: imx6ul: Add Variscite DART-6UL SoM support

[Marco Felsch]

Hi Oliver,

thanks for the patch. I made my comments inline.

On 19-11-12 20:22, Oliver Graute wrote:
> This patch adds support for the i.MX6UL variant of the Variscite DART-6UL
> SoM Carrier-Board
> 
> Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Changelog:
> 
> v7:
>  - removed cpu0 node
>  - fixed phy problem
> 
> v6:
>  - renamed touch regulator
>  - renamed rmii clock
>  - moved some muxing to baseboard
>  - added pinctrl for gpio key
>  - added bus-width to usdhc1
>  - fixed missing subnode on partitions
> 
>  .../boot/dts/imx6ul-imx6ull-var-dart-common.dtsi   | 376 +++++++++++++++++++++
>  1 file changed, 376 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
> new file mode 100644
> index 00000000..b3cd928
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
> @@ -0,0 +1,367 @@
> +// SPDX-License-Identifier: (GPL-2.0)
> +/dts-v1/;
> +
> +#include "imx6ul.dtsi"
> +/ {
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	clk_rmii_ref: clock-rmii-ref {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +		clock-output-names = "rmii-ref";
> +	};
> +
> +	reg_touch_3v3: regulator-touch-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "touch_3v3_supply";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};

Where is this regulator used?

> +
> +	reg_sd1_vmmc: regulator-sd1-vmmc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_gpio_dvfs: regulator-gpio {
> +		compatible = "regulator-gpio";
> +		regulator-min-microvolt = <1300000>;
> +		regulator-max-microvolt = <1400000>;
> +		regulator-name = "gpio_dvfs";
> +		regulator-type = "voltage";
> +		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;

Please add a dedicated pinctrl for this regultor.

> +		enable-active-high;
> +		states = <1300000 0x1 1400000 0x0>;
> +	};

Can you alphabetical order the regultor-* nodes?

> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet1>;
> +	phy-mode = "rmii";
> +	phy-handle = <&ethphy0>;
> +	phy-reset-gpios=<&gpio5 10 1>;

Where happens this mux?

> +	phy-reset-duration=<100>;
> +	phy-reset-on-resume;
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy0: ethernet-phy@1 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			micrel,rmii-reference-clock-select-25-mhz;
> +			clocks = <&clk_rmii_ref>;
> +			clock-names = "rmii-ref";
> +			reg = <1>;
> +		};
> +
> +		ethphy1: ethernet-phy@3 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			micrel,rmii-reference-clock-select-25-mhz;
> +			clocks = <&clk_rmii_ref>;
> +			clock-names = "rmii-ref";
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +&gpmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpmi_nand>;
> +	status = "okay";
> +
> +	nand@0 {

I never saw this notation. Please check the
Documentation/devicetree/bindings/mtd/partition.txt.

> +		partition@0 {
> +			label = "spl";
> +			reg = <0x00000000 0x00200000>;
> +		};
> +
> +		partition@200000 {
> +			label = "uboot";
> +			reg = <0x00200000 0x00200000>;
> +		};
> +
> +		partition@400000 {
> +			label = "uboot-env";
> +			reg = <0x00400000 0x00200000>;
> +		};
> +
> +		partition@600000 {
> +			label = "kernel";
> +			reg = <0x00600000 0x00800000>;
> +		};
> +
> +		partition@e00000 {
> +			label = "rootfs";
> +			reg = <0x00e00000 0x3f200000>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +};

Please sort it alphabetical.

> +
> +&sai2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai2>;
> +	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
> +			  <&clks IMX6UL_CLK_SAI2>;
> +	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> +	assigned-clock-rates = <0>, <12288000>;
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
> +};
> +
> +&snvs_poweroff {
> +	status = "okay";
> +};
> +
> +&snvs_rtc {
> +	status = "disabled";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	uart-has-rtscts;
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> +	bus-width = <4>;
> +	no-1-8-v;

HS200 mode only works with 1.8V or 1.2V. Can you verify the HS200 state?

Regards,
  Marco

> +	keep-power-in-suspend;
> +	vmmc-supply = <&reg_sd1_vmmc>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	fsl,ext-reset-output;
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	pinctrl_enet1: enet1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
> +			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
> +			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
> +			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
> +		>;
> +	};
> +
> +	pinctrl_enet2: enet2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
> +			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_flexcan1: flexcan1grp{
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
> +			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
> +		>;
> +	};
> +
> +	pinctrl_flexcan2: flexcan2grp{
> +		fsl,pins = <
> +			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
> +			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
> +		>;
> +	};
> +
> +	pinctrl_gpio_keys: gpio_keysgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059
> +		>;
> +	};
> +
> +	pinctrl_gpio_leds: gpioledsgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_gpmi_nand: gpminandgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
> +			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
> +			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
> +			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
> +			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
> +			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0xb0b1
> +			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
> +			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
> +			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
> +			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
> +			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
> +			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
> +			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
> +			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
> +			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
> +			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
> +		>;
> +	};
> +
> +	pinctrl_hog: hoggrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT    0x03029
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
> +			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
> +			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_lcdif: lcdif {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
> +			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
> +			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
> +			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
> +			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
> +			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
> +			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
> +			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
> +			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
> +			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
> +			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
> +			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
> +			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
> +			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
> +			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
> +			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
> +			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
> +			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
> +			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
> +			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
> +		>;
> +	};
> +
> +	pinctrl_pwm1: pwm1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x110b0
> +		>;
> +	};
> +
> +	pinctrl_sai2: sai2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
> +			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
> +			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
> +			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
> +			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
> +			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
> +			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
> +			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
> +			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
> +			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
> +			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
> +			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
> +			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
> +			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
> +			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x78b0
> +		>;
> +	};
> +};
> -- 
> 2.7.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Marco Felsch]

On 19-11-12 20:17, Fabio Estevam wrote:
> Hi Oliver,
> 
> On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> 
> > +&lcdif {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_lcdif>;
> > +       display = <&display0>;
> > +       status = "okay";
> > +
> > +       display0: display0 {
> > +               bits-per-pixel = <16>;
> > +               bus-width = <24>;
> > +
> > +               display-timings {
> > +                       native-mode = <&timing0>;
> > +                       timing0: timing0 {
> > +                               clock-frequency =<35000000>;
> > +                               hactive = <800>;
> > +                               vactive = <480>;
> > +                               hfront-porch = <40>;
> > +                               hback-porch = <40>;
> > +                               hsync-len = <48>;
> > +                               vback-porch = <29>;
> > +                               vfront-porch = <13>;
> > +                               vsync-len = <3>;
> > +                               hsync-active = <0>;
> > +                               vsync-active = <0>;
> > +                               de-active = <1>;
> > +                               pixelclk-active = <0>;
> > +                       };
> > +               };
> > +       };
> > +};
> 
> You are using the deprecated bindings.
> 
> Please switch to the DRM bindings as stated at
> Documentation/devicetree/bindings/display/mxsfb.txt
> 
> You should also add your panel to the simple panel driver.

That would be the best solution :)

Regards,
  Marco

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Marco Felsch]

Hi Oliver,

I made my comments inline.

On 19-11-12 20:22, Oliver Graute wrote:
> This patch adds DeviceTree Source for the i.MX6 UltraLite DART NAND/WIFI
> 
> Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Changelog:
> 
> v7
>  - fixed wakeup-source
> 
> v6:
>  - added some muxing
>  - added codec in sound node
>  - added adc1 node
> 
>  arch/arm/boot/dts/Makefile                      |   1 +
>  arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 221 ++++++++++++++++++++++++
>  2 files changed, 222 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index df2e1f2..65fac53 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -583,6 +583,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
>  	imx6ul-tx6ul-mainboard.dtb \
> +	imx6ul-var-6ulcustomboard.dtb \
>  	imx6ull-14x14-evk.dtb \
>  	imx6ull-colibri-eval-v3.dtb \
>  	imx6ull-colibri-wifi-eval-v3.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> new file mode 100644
> index 00000000..5b88aad
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: (GPL-2.0)
> +/*
> + * Support for Variscite DART-6UL Module
> + *
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
> + * Copyright (C) 2018-2019 Oliver Graute <oliver.graute@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx6ul-imx6ull-var-dart-common.dtsi"
> +
> +/ {
> +	model = "Variscite i.MX6 UltraLite Carrier-board";
> +	compatible = "variscite,6ulcustomboard", "fsl,imx6ul";
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 20000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +		status = "okay";

The status line can be dropped.

> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_keys>;

Where is the phandle?

> +
> +		user {
> +			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_BACK>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;

Also this phandle.. I saw this a few times within this dts. Please make
sure that your dts(i) files are self-contained so move the muxing to
this dts. This happens a few time, I don't list all phandles.

> +
> +		d16-led {
> +			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "wm8731audio";
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack",
> +			"Line", "Line Jack",
> +			"Microphone", "Mic Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "RHPOUT",
> +			"Headphone Jack", "LHPOUT",
> +			"LLINEIN", "Line Jack",
> +			"RLINEIN", "Line Jack",
> +			"MICIN", "Mic Bias",
> +			"Mic Bias", "Mic Jack";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,bitclock-master = <&codec_dai>;
> +		simple-audio-card,frame-master = <&codec_dai>;
> +
> +		cpu_dai: simple-audio-card,cpu {

Do you need the cpu_dai phandle?

> +			sound-dai = <&sai2>;
> +		};
> +
> +		codec_dai: simple-audio-card,codec {
> +			sound-dai = <&wm8731>;
> +			system-clock-frequency = <12288000>;
> +		};
> +	};
> +};
> +
> +&adc1 {
> +	vref-supply = <&reg_touch_3v3>;

This is the only place where you use this regulator so can we move the
regulator to this dts instead of the common dtsi?

> +	status = "okay";
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "okay";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	status = "okay";
> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet1>;
> +	status = "okay";
> +};
> +
> +&fec2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet2>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;

Can this go to the common dtsi file?

> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock_frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	wm8731: audio-codec@1a {
> +		compatible = "wlf,wm8731";
> +		reg = <0x1a>;
> +		#sound-dai-cells = <0>;
> +		clocks = <&clks IMX6UL_CLK_SAI2>;
> +		clock-names = "mclk";
> +	};
> +
> +	touchscreen@38 {
> +		compatible = "edt,edt-ft5x06";
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <4 IRQ_TYPE_NONE>;
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <480>;
> +		touchscreen-inverted-x;
> +		touchscreen-inverted-y;
> +		wakeup-source;
> +	};
> +
> +	rtc@68 {
> +		compatible = "dallas,ds1337";
> +		reg = <0x68>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_rtc>;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +	};
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif>;
> +	display = <&display0>;
> +	status = "okay";
> +
> +	display0: display0 {
> +		bits-per-pixel = <16>;
> +		bus-width = <24>;
> +
> +		display-timings {
> +			native-mode = <&timing0>;
> +			timing0: timing0 {
> +				clock-frequency =<35000000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hfront-porch = <40>;
> +				hback-porch = <40>;
> +				hsync-len = <48>;
> +				vback-porch = <29>;
> +				vfront-porch = <13>;
> +				vsync-len = <3>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;

Where goes this phandle?

> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	disable-over-current;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	disable-over-current;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_rtc: rtcgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
> +		>;
> +	};
> +};
> -- 
> 2.7.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/3] dt-bindings: arm: fsl: Add Variscite i.MX6UL compatibles

[Rob Herring]

On Tue, Nov 12, 2019 at 08:19:44PM -0300, Fabio Estevam wrote:
> On Tue, Nov 12, 2019 at 6:25 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> >
> > Add the compatibles for Variscite i.MX6UL compatibles
> >
> > Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index f79683a..d0c7e60 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -182,6 +182,7 @@ properties:
> >                - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
> >                - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
> >                - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
> > +              - variscite,6ulcustomboard" # i.MX UltraLite Carrier-board
> 
> I guess what you mean is:
> 
> variscite,imx6ul-var-6ulcustomboard # i.MX6 UltraLite Carrier-board

It matched the .dts file. However the '"' in there is an error. Make 
sure 'make dt_binding_check' passes.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/3] dt-bindings: arm: fsl: Add Variscite i.MX6UL compatibles

[Fabio Estevam]

On Mon, Nov 18, 2019 at 6:29 PM Rob Herring <robh@kernel.org> wrote:

> > I guess what you mean is:
> >
> > variscite,imx6ul-var-6ulcustomboard # i.MX6 UltraLite Carrier-board
>
> It matched the .dts file. However the '"' in there is an error. Make
> sure 'make dt_binding_check' passes.

The dts is called imx6ul-var-6ulcustomboard.dts, so it is not matching
the dts name.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Oliver Graute]

On 12/11/19, Fabio Estevam wrote:
> Hi Oliver,
> 
> On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> 
> > +&lcdif {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_lcdif>;
> > +       display = <&display0>;
> > +       status = "okay";
> > +
> > +       display0: display0 {
> > +               bits-per-pixel = <16>;
> > +               bus-width = <24>;
> > +
> > +               display-timings {
> > +                       native-mode = <&timing0>;
> > +                       timing0: timing0 {
> > +                               clock-frequency =<35000000>;
> > +                               hactive = <800>;
> > +                               vactive = <480>;
> > +                               hfront-porch = <40>;
> > +                               hback-porch = <40>;
> > +                               hsync-len = <48>;
> > +                               vback-porch = <29>;
> > +                               vfront-porch = <13>;
> > +                               vsync-len = <3>;
> > +                               hsync-active = <0>;
> > +                               vsync-active = <0>;
> > +                               de-active = <1>;
> > +                               pixelclk-active = <0>;
> > +                       };
> > +               };
> > +       };
> > +};
> 
> You are using the deprecated bindings.
> 
> Please switch to the DRM bindings as stated at
> Documentation/devicetree/bindings/display/mxsfb.txt
> 
> You should also add your panel to the simple panel driver.


ok thx for you comments, coming back to this. I now added this to
panel-simple.c. Is this the way to go?

Best Regards,

Oliver

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index c1374be..c2f20ac 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3139,6 +3139,29 @@ static const struct panel_desc satoz_sat050at40h12r2 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
+static const struct display_timing sgd_gktw70sdad1sd_timing = {
+	.pixelclock = {35000000, 35000000, 35000000},
+	.hactive = { 800, 800, 800},
+	.hfront_porch = {39, 39, 39},
+	.hback_porch = {39, 39, 39},
+	.hsync_len = {48, 48, 48},
+	.vactive = {480, 480, 480},
+	.vfront_porch = {13, 13, 13},
+	.vback_porch = {29, 29, 29},
+	.vsync_len = {3, 3, 3},
+};
+
+static const struct panel_desc sgd_gktw70sdad1sd = {
+	.timings = &sgd_gktw70sdad1sd_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 153,
+		.height = 86,
+	},
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
 	.clock = 168480,
 	.hdisplay = 1920,
@@ -3999,6 +4022,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "satoz,sat050at40h12r2",
 		.data = &satoz_sat050at40h12r2,
 	}, {
+		.compatible = "sgd,gktw70sdad1sd",
+		.data = &sgd_gktw70sdad1sd,
+	}, {
 		.compatible = "sharp,ld-d5116z01b",

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

[Fabio Estevam]

Hi Oliver,

On Wed, Jul 8, 2020 at 10:12 AM Oliver Graute <oliver.graute@gmail.com> wrote:

> ok thx for you comments, coming back to this. I now added this to
> panel-simple.c. Is this the way to go?

Yes, please submit it as a formal patch to the drm folks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel