* [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias
@ 2021-02-28 21:18 Marek Vasut
2021-02-28 21:18 ` [PATCH V2 2/2] arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP Marek Vasut
2021-03-08 0:58 ` [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Marek Vasut @ 2021-02-28 21:18 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Marek Vasut, Dong Aisheng, Peng Fan, NXP Linux Team,
Teresa Remmet, Heiko Schocher, Shawn Guo
Add EQOS GMAC node per Documentation/devicetree/bindings/net/imx-dwmac.txt ,
leave out the nvmem entries as that is not yet available, so the MAC has to
be passed in via DT by the bootloader.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Teresa Remmet <t.remmet@phytec.de>
---
V2: - Rebase on latest linux-next
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c7523fd4eae9b..4e019dfcc0181 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -18,6 +18,7 @@ / {
aliases {
ethernet0 = &fec;
+ ethernet1 = &eqos;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -786,6 +787,28 @@ fec: ethernet@30be0000 {
nvmem_macaddr_swap;
status = "disabled";
};
+
+ eqos: ethernet@30bf0000 {
+ compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eth_wake_irq", "macirq";
+ clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+ <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+ <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+ <&clk IMX8MP_CLK_ENET_QOS>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+ assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+ <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+ <&clk IMX8MP_CLK_ENET_QOS>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+ <&clk IMX8MP_SYS_PLL2_100M>,
+ <&clk IMX8MP_SYS_PLL2_125M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>;
+ intf_mode = <&gpr 0x4>;
+ status = "disabled";
+ };
};
gic: interrupt-controller@38800000 {
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH V2 2/2] arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP
2021-02-28 21:18 [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias Marek Vasut
@ 2021-02-28 21:18 ` Marek Vasut
2021-03-08 0:58 ` [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Marek Vasut @ 2021-02-28 21:18 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Marek Vasut, Dong Aisheng, Peng Fan, NXP Linux Team,
Teresa Remmet, Heiko Schocher, Shawn Guo
The board has both MACs routed out, enable the EQOS.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Teresa Remmet <t.remmet@phytec.de>
---
V2: - Rebase on latest linux-next
- Move eqos and pinmux entries from imx8mp-phycore-som.dtsi to
imx8mp-phyboard-pollux-rdk.dts, because the PHY is populated
on the baseboard, not on the SoM.
---
.../freescale/imx8mp-phyboard-pollux-rdk.dts | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 0e1a6d953389d..f33f2c0a22a2b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -33,6 +33,30 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
};
};
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ enet-phy-lane-no-swap;
+ };
+ };
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -90,6 +114,26 @@ &usdhc2 {
};
&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias
2021-02-28 21:18 [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias Marek Vasut
2021-02-28 21:18 ` [PATCH V2 2/2] arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP Marek Vasut
@ 2021-03-08 0:58 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2021-03-08 0:58 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Dong Aisheng, Heiko Schocher, NXP Linux Team,
Peng Fan, Teresa Remmet
On Sun, Feb 28, 2021 at 10:18:33PM +0100, Marek Vasut wrote:
> Add EQOS GMAC node per Documentation/devicetree/bindings/net/imx-dwmac.txt ,
> leave out the nvmem entries as that is not yet available, so the MAC has to
> be passed in via DT by the bootloader.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Dong Aisheng <aisheng.dong@nxp.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Teresa Remmet <t.remmet@phytec.de>
> ---
> V2: - Rebase on latest linux-next
Applied both, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-03-08 0:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-28 21:18 [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias Marek Vasut
2021-02-28 21:18 ` [PATCH V2 2/2] arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP Marek Vasut
2021-03-08 0:58 ` [PATCH V2 1/2] arm64: dts: imx8mp: add eqos node and alias Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).