* [GIT PULL] STM32 DT changes for v4.21 #1
@ 2018-12-03 11:18 Alexandre Torgue
2018-12-03 20:57 ` Olof Johansson
2019-01-08 7:29 ` Alexandre Torgue
0 siblings, 2 replies; 8+ messages in thread
From: Alexandre Torgue @ 2018-12-03 11:18 UTC (permalink / raw)
To: Arnd Bergmann, Kevin Hilman, arm-soc, Olof Johansson, linux-arm-kernel
Cc: Alexandre TORGUE, Maxime Coquelin
Hi Arnd, Olof and Kevin,
Please consider this first round of STM32 DT updates for v4.21.
Thanks.
Alex
The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
stm32-dt-for-v4.21-1
for you to fetch changes up to 8914b63bab3c43a529316ba2858137bc57b74fa1:
ARM: dts: stm32: add thermal sensor support on STM32MP157c
(2018-12-03 10:43:26 +0100)
----------------------------------------------------------------
STM32 DT updates for v4.21, round 1
Highlights:
----------
-MPU STM32MP157 platform update:
-Declare DMAs for timers
-Add sleep support for CAN
-Split CAN RAM mapping between the 2 FDCAN instances
-Add support of thermal sensor (DTS)
----------------------------------------------------------------
Bich HEMON (3):
ARM: dts: stm32: change CAN RAM mapping on stm32mp157c
ARM: dts: stm32: add can1 sleep pins muxing
ARM: dts: stm32: add can1 sleep pins muxing on stm32mp157c-ev1 board
David Hernandez Sanchez (1):
ARM: dts: stm32: add thermal sensor support on STM32MP157c
Fabrice Gasnier (3):
ARM: dts: stm32: Add dmas to timer on stm32mp157c
ARM: dts: stm32: don't use timers dmas on stm32mp157c-ed1
ARM: dts: stm32: don't use timers dmas on stm32mp157c-ev1
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 7 +++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 3 +
arch/arm/boot/dts/stm32mp157c-ev1.dts | 10 +++-
arch/arm/boot/dts/stm32mp157c.dtsi | 97
++++++++++++++++++++++++++++++-
4 files changed, 114 insertions(+), 3 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2018-12-03 11:18 [GIT PULL] STM32 DT changes for v4.21 #1 Alexandre Torgue
@ 2018-12-03 20:57 ` Olof Johansson
2019-01-08 7:29 ` Alexandre Torgue
1 sibling, 0 replies; 8+ messages in thread
From: Olof Johansson @ 2018-12-03 20:57 UTC (permalink / raw)
To: Alexandre Torgue
Cc: Maxime Coquelin, Kevin Hilman, arm-soc, linux-arm-kernel, Arnd Bergmann
On Mon, Dec 03, 2018 at 12:18:17PM +0100, Alexandre Torgue wrote:
> Hi Arnd, Olof and Kevin,
>
> Please consider this first round of STM32 DT updates for v4.21.
>
> Thanks.
> Alex
>
> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
>
> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
> stm32-dt-for-v4.21-1
>
> for you to fetch changes up to 8914b63bab3c43a529316ba2858137bc57b74fa1:
>
> ARM: dts: stm32: add thermal sensor support on STM32MP157c (2018-12-03
> 10:43:26 +0100)
I think you might have missed pushing the tag to the remote?
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2018-12-03 11:18 [GIT PULL] STM32 DT changes for v4.21 #1 Alexandre Torgue
2018-12-03 20:57 ` Olof Johansson
@ 2019-01-08 7:29 ` Alexandre Torgue
2019-01-08 8:42 ` Alexandre Torgue
1 sibling, 1 reply; 8+ messages in thread
From: Alexandre Torgue @ 2019-01-08 7:29 UTC (permalink / raw)
To: Arnd Bergmann, Kevin Hilman, arm-soc, Olof Johansson, linux-arm-kernel
Cc: Maxime Coquelin
Hi guys
On 12/3/18 12:18 PM, Alexandre Torgue wrote:
> Hi Arnd, Olof and Kevin,
>
> Please consider this first round of STM32 DT updates for v4.21.
>
> Thanks.
> Alex
>
This PR has not been merged in 5.0-rc1. Is there an issue (except than
v4.21 doesn't exist :)) ?
If not, is it possible to get it in next 5.0 rc ?
Thanks in advance
Alex
> The following changes since commit
> 651022382c7f8da46cb4872a545ee1da6d097d2a:
>
> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
> stm32-dt-for-v4.21-1
>
> for you to fetch changes up to 8914b63bab3c43a529316ba2858137bc57b74fa1:
>
> ARM: dts: stm32: add thermal sensor support on STM32MP157c
> (2018-12-03 10:43:26 +0100)
>
> ----------------------------------------------------------------
> STM32 DT updates for v4.21, round 1
>
> Highlights:
> ----------
>
> -MPU STM32MP157 platform update:
> -Declare DMAs for timers
> -Add sleep support for CAN
> -Split CAN RAM mapping between the 2 FDCAN instances
> -Add support of thermal sensor (DTS)
>
> ----------------------------------------------------------------
> Bich HEMON (3):
> ARM: dts: stm32: change CAN RAM mapping on stm32mp157c
> ARM: dts: stm32: add can1 sleep pins muxing
> ARM: dts: stm32: add can1 sleep pins muxing on stm32mp157c-ev1 board
>
> David Hernandez Sanchez (1):
> ARM: dts: stm32: add thermal sensor support on STM32MP157c
>
> Fabrice Gasnier (3):
> ARM: dts: stm32: Add dmas to timer on stm32mp157c
> ARM: dts: stm32: don't use timers dmas on stm32mp157c-ed1
> ARM: dts: stm32: don't use timers dmas on stm32mp157c-ev1
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 7 +++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 3 +
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 10 +++-
> arch/arm/boot/dts/stm32mp157c.dtsi | 97
> ++++++++++++++++++++++++++++++-
> 4 files changed, 114 insertions(+), 3 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2019-01-08 7:29 ` Alexandre Torgue
@ 2019-01-08 8:42 ` Alexandre Torgue
2019-01-30 16:29 ` Arnd Bergmann
0 siblings, 1 reply; 8+ messages in thread
From: Alexandre Torgue @ 2019-01-08 8:42 UTC (permalink / raw)
To: Arnd Bergmann, Kevin Hilman, arm-soc, Olof Johansson, linux-arm-kernel
Cc: Maxime Coquelin
Hi
On 1/8/19 8:29 AM, Alexandre Torgue wrote:
> Hi guys
>
> On 12/3/18 12:18 PM, Alexandre Torgue wrote:
>> Hi Arnd, Olof and Kevin,
>>
>> Please consider this first round of STM32 DT updates for v4.21.
>>
>> Thanks.
>> Alex
>>
>
> This PR has not been merged in 5.0-rc1. Is there an issue (except than
> v4.21 doesn't exist :)) ?
> If not, is it possible to get it in next 5.0 rc ?
>
Sorry for the last post. I completely missed Olof answer:
"I think you might have missed pushing the tag to the remote?
-Olof
"
My tag is now pushed. Is there a chance to get it in next RC ?
Sorry for inconvenience.
Alex
> Thanks in advance
> Alex
>
>
>> The following changes since commit
>> 651022382c7f8da46cb4872a545ee1da6d097d2a:
>>
>> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
>> stm32-dt-for-v4.21-1
>>
>> for you to fetch changes up to 8914b63bab3c43a529316ba2858137bc57b74fa1:
>>
>> ARM: dts: stm32: add thermal sensor support on STM32MP157c
>> (2018-12-03 10:43:26 +0100)
>>
>> ----------------------------------------------------------------
>> STM32 DT updates for v4.21, round 1
>>
>> Highlights:
>> ----------
>>
>> -MPU STM32MP157 platform update:
>> -Declare DMAs for timers
>> -Add sleep support for CAN
>> -Split CAN RAM mapping between the 2 FDCAN instances
>> -Add support of thermal sensor (DTS)
>>
>> ----------------------------------------------------------------
>> Bich HEMON (3):
>> ARM: dts: stm32: change CAN RAM mapping on stm32mp157c
>> ARM: dts: stm32: add can1 sleep pins muxing
>> ARM: dts: stm32: add can1 sleep pins muxing on stm32mp157c-ev1
>> board
>>
>> David Hernandez Sanchez (1):
>> ARM: dts: stm32: add thermal sensor support on STM32MP157c
>>
>> Fabrice Gasnier (3):
>> ARM: dts: stm32: Add dmas to timer on stm32mp157c
>> ARM: dts: stm32: don't use timers dmas on stm32mp157c-ed1
>> ARM: dts: stm32: don't use timers dmas on stm32mp157c-ev1
>>
>> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 7 +++
>> arch/arm/boot/dts/stm32mp157c-ed1.dts | 3 +
>> arch/arm/boot/dts/stm32mp157c-ev1.dts | 10 +++-
>> arch/arm/boot/dts/stm32mp157c.dtsi | 97
>> ++++++++++++++++++++++++++++++-
>> 4 files changed, 114 insertions(+), 3 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2019-01-08 8:42 ` Alexandre Torgue
@ 2019-01-30 16:29 ` Arnd Bergmann
2019-01-30 16:45 ` Alexandre Torgue
0 siblings, 1 reply; 8+ messages in thread
From: Arnd Bergmann @ 2019-01-30 16:29 UTC (permalink / raw)
To: Alexandre Torgue
Cc: Olof Johansson, Kevin Hilman, arm-soc, Maxime Coquelin, linux-arm-kernel
On Tue, Jan 8, 2019 at 9:42 AM Alexandre Torgue <alexandre.torgue@st.com> wrote:
> On 1/8/19 8:29 AM, Alexandre Torgue wrote:
> > On 12/3/18 12:18 PM, Alexandre Torgue wrote:
> >> Hi Arnd, Olof and Kevin,
> >>
> >> Please consider this first round of STM32 DT updates for v4.21.
> >>
> >> Thanks.
> >> Alex
> >>
> >
> > This PR has not been merged in 5.0-rc1. Is there an issue (except than
> > v4.21 doesn't exist :)) ?
> > If not, is it possible to get it in next 5.0 rc ?
> >
>
> Sorry for the last post. I completely missed Olof answer:
>
> "I think you might have missed pushing the tag to the remote?
> -Olof
> "
>
> My tag is now pushed. Is there a chance to get it in next RC ?
I noticed this we were still missing this one, but it's clearly too
late now for 5.0 now, so I've pulled it into arm/dt for 5.1 now.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2019-01-30 16:29 ` Arnd Bergmann
@ 2019-01-30 16:45 ` Alexandre Torgue
2019-01-30 21:01 ` Arnd Bergmann
0 siblings, 1 reply; 8+ messages in thread
From: Alexandre Torgue @ 2019-01-30 16:45 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Olof Johansson, Kevin Hilman, arm-soc, Maxime Coquelin, linux-arm-kernel
On 1/30/19 5:29 PM, Arnd Bergmann wrote:
> On Tue, Jan 8, 2019 at 9:42 AM Alexandre Torgue <alexandre.torgue@st.com> wrote:
>> On 1/8/19 8:29 AM, Alexandre Torgue wrote:
>>> On 12/3/18 12:18 PM, Alexandre Torgue wrote:
>>>> Hi Arnd, Olof and Kevin,
>>>>
>>>> Please consider this first round of STM32 DT updates for v4.21.
>>>>
>>>> Thanks.
>>>> Alex
>>>>
>>>
>>> This PR has not been merged in 5.0-rc1. Is there an issue (except than
>>> v4.21 doesn't exist :)) ?
>>> If not, is it possible to get it in next 5.0 rc ?
>>>
>>
>> Sorry for the last post. I completely missed Olof answer:
>>
>> "I think you might have missed pushing the tag to the remote?
>> -Olof
>> "
>>
>> My tag is now pushed. Is there a chance to get it in next RC ?
>
> I noticed this we were still missing this one, but it's clearly too
> late now for 5.0 now, so I've pulled it into arm/dt for 5.1 now.
Sure it's too late :) and no pb. I planned to resend it for 5.1 so
thanks to have already taken it. One question, I have a (small) PR to
send for 5.1 this week. what is the best for you: base it on top of
arm/dt ? or rebase the one for 5.0 on 5.1 and make my PR on top of it ?
Regard
Alex
>
> Arnd
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2019-01-30 16:45 ` Alexandre Torgue
@ 2019-01-30 21:01 ` Arnd Bergmann
2019-01-31 8:04 ` Alexandre Torgue
0 siblings, 1 reply; 8+ messages in thread
From: Arnd Bergmann @ 2019-01-30 21:01 UTC (permalink / raw)
To: Alexandre Torgue
Cc: Olof Johansson, Kevin Hilman, arm-soc, Maxime Coquelin, linux-arm-kernel
On Wed, Jan 30, 2019 at 5:45 PM Alexandre Torgue
<alexandre.torgue@st.com> wrote:
> On 1/30/19 5:29 PM, Arnd Bergmann wrote:
> > On Tue, Jan 8, 2019 at 9:42 AM Alexandre Torgue <alexandre.torgue@st.com> wrote:
> >> On 1/8/19 8:29 AM, Alexandre Torgue wrote:
> >>> On 12/3/18 12:18 PM, Alexandre Torgue wrote:
> >>>> Hi Arnd, Olof and Kevin,
> >>>>
> >>>> Please consider this first round of STM32 DT updates for v4.21.
> >>>>
> >>>> Thanks.
> >>>> Alex
> >>>>
> >>>
> >>> This PR has not been merged in 5.0-rc1. Is there an issue (except than
> >>> v4.21 doesn't exist :)) ?
> >>> If not, is it possible to get it in next 5.0 rc ?
> >>>
> >>
> >> Sorry for the last post. I completely missed Olof answer:
> >>
> >> "I think you might have missed pushing the tag to the remote?
> >> -Olof
> >> "
> >>
> >> My tag is now pushed. Is there a chance to get it in next RC ?
> >
> > I noticed this we were still missing this one, but it's clearly too
> > late now for 5.0 now, so I've pulled it into arm/dt for 5.1 now.
>
> Sure it's too late :) and no pb. I planned to resend it for 5.1 so
> thanks to have already taken it. One question, I have a (small) PR to
> send for 5.1 this week. what is the best for you: base it on top of
> arm/dt ? or rebase the one for 5.0 on 5.1 and make my PR on top of it ?
You should never rebase a branch that was already merged somewhere,
and I also wouldn't base one of your branches on top of mine.
What I'd recommend instead is to base your new work on top of
the branch I just pulled. If you also need stuff from 5.0-rc1, then
start with that and merge stm32-dt-for-v4.21-1 into that, followed
by your new work on top (note: don't merge 5.0-rc1 into
stm32-dt-for-v4.21-1 though, that would lead to a confusing
git history).
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v4.21 #1
2019-01-30 21:01 ` Arnd Bergmann
@ 2019-01-31 8:04 ` Alexandre Torgue
0 siblings, 0 replies; 8+ messages in thread
From: Alexandre Torgue @ 2019-01-31 8:04 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Olof Johansson, Kevin Hilman, arm-soc, Maxime Coquelin, linux-arm-kernel
On 1/30/19 10:01 PM, Arnd Bergmann wrote:
> On Wed, Jan 30, 2019 at 5:45 PM Alexandre Torgue
> <alexandre.torgue@st.com> wrote:
>> On 1/30/19 5:29 PM, Arnd Bergmann wrote:
>>> On Tue, Jan 8, 2019 at 9:42 AM Alexandre Torgue <alexandre.torgue@st.com> wrote:
>>>> On 1/8/19 8:29 AM, Alexandre Torgue wrote:
>>>>> On 12/3/18 12:18 PM, Alexandre Torgue wrote:
>>>>>> Hi Arnd, Olof and Kevin,
>>>>>>
>>>>>> Please consider this first round of STM32 DT updates for v4.21.
>>>>>>
>>>>>> Thanks.
>>>>>> Alex
>>>>>>
>>>>>
>>>>> This PR has not been merged in 5.0-rc1. Is there an issue (except than
>>>>> v4.21 doesn't exist :)) ?
>>>>> If not, is it possible to get it in next 5.0 rc ?
>>>>>
>>>>
>>>> Sorry for the last post. I completely missed Olof answer:
>>>>
>>>> "I think you might have missed pushing the tag to the remote?
>>>> -Olof
>>>> "
>>>>
>>>> My tag is now pushed. Is there a chance to get it in next RC ?
>>>
>>> I noticed this we were still missing this one, but it's clearly too
>>> late now for 5.0 now, so I've pulled it into arm/dt for 5.1 now.
>>
>> Sure it's too late :) and no pb. I planned to resend it for 5.1 so
>> thanks to have already taken it. One question, I have a (small) PR to
>> send for 5.1 this week. what is the best for you: base it on top of
>> arm/dt ? or rebase the one for 5.0 on 5.1 and make my PR on top of it ?
>
> You should never rebase a branch that was already merged somewhere,
> and I also wouldn't base one of your branches on top of mine.
>
> What I'd recommend instead is to base your new work on top of
> the branch I just pulled. If you also need stuff from 5.0-rc1, then
> start with that and merge stm32-dt-for-v4.21-1 into that, followed
> by your new work on top (note: don't merge 5.0-rc1 into
> stm32-dt-for-v4.21-1 though, that would lead to a confusing
> git history).
Ok. Thanks Arnd.
>
> Arnd
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-01-31 8:05 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-03 11:18 [GIT PULL] STM32 DT changes for v4.21 #1 Alexandre Torgue
2018-12-03 20:57 ` Olof Johansson
2019-01-08 7:29 ` Alexandre Torgue
2019-01-08 8:42 ` Alexandre Torgue
2019-01-30 16:29 ` Arnd Bergmann
2019-01-30 16:45 ` Alexandre Torgue
2019-01-30 21:01 ` Arnd Bergmann
2019-01-31 8:04 ` Alexandre Torgue
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).