* [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4
@ 2021-06-07 6:54 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 1/7] arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator Neil Armstrong
` (7 more replies)
0 siblings, 8 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
Here is a collection of fixes/small additions to Odroid-C4 & Odroid-HC4 concerning
regulators handling, USB and SPI NOR Flash of HC4.
Changes from v1 at [1]:
- added review tags from martin
- removed invalid patch about hub_5v
- added proper vcc_5v gpio control
- removed invalid hub_5v regulator already controlled by a gpio hog
[1] https://lore.kernel.org/r/20210601090140.261768-1-narmstrong@baylibre.com
Christian Hewitt (1):
arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
Neil Armstrong (6):
arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for
tf_io regulator
arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
arm64: dts: meson-sm1-odroid: add 5v regulator gpio
arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 17 -------
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 48 ++++++++++++++++++-
.../boot/dts/amlogic/meson-sm1-odroid.dtsi | 9 +++-
3 files changed, 54 insertions(+), 20 deletions(-)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 1/7] arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 2/7] arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source Neil Armstrong
` (6 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
As described in the schematics of Odroid-C4 and Odroid-HC4, the TF_IO regulator
is enabled by the GPIOE_2 GPIO and gets it's supply from VCC_5V.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index d14716b3d0f1..af40ba461074 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -46,6 +46,11 @@ tf_io: gpio-regulator-tf_io {
regulator-name = "TF_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5v>;
+
+ enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/7] arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 1/7] arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio Neil Armstrong
` (5 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
According to Odroid-C4 & HC4 Schematics, the TF_3V3N_1V8_EN can be in Hi-Z for 3v3,
and since it's the default GPIOAO_6 mode at reset, let switch this GPIO as Open-Source
to drive for 1, and input for 0.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index af40ba461074..e64359163331 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -52,7 +52,7 @@ tf_io: gpio-regulator-tf_io {
enable-active-high;
regulator-always-on;
- gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
gpios-states = <0>;
states = <3300000 0>,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 1/7] arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 2/7] arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-12 19:49 ` Martin Blumenstingl
2021-06-07 6:54 ` [PATCH v2 4/7] arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0 Neil Armstrong
` (4 subsequent siblings)
7 siblings, 1 reply; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
As described in the Odroid-C4 & Odroid-HC4 schematics, the 5V regulator is controlled
by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index e64359163331..fd0ad85c165b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -83,6 +83,8 @@ vcc_5v: regulator-vcc_5v {
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&main_12v>;
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
};
vcc_1v8: regulator-vcc_1v8 {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 4/7] arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
` (2 preceding siblings ...)
2021-06-07 6:54 ` [PATCH v2 3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 5/7] arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8 Neil Armstrong
` (3 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
As described in the HC4 schematics, only the USB port B is used,
port A is left unconnected. Thus disable PHY0 and remove it from PHYs list.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index bf15700c4b15..0a34b658f994 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -91,6 +91,10 @@ &sd_emmc_c {
};
&usb {
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+};
+
+&usb2_phy0 {
+ status = "disabled";
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 5/7] arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
` (3 preceding siblings ...)
2021-06-07 6:54 ` [PATCH v2 4/7] arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0 Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 6/7] arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4 Neil Armstrong
` (2 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
As described in the HC4 schematics, GPIOH_8 controls the USB 5V and 12V
regulators used to power the SATA drives.
And is set as Open Drain since this GPIO doesn't support Push-Pull.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index 0a34b658f994..fdad6b994c88 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -44,6 +44,32 @@ led-red {
};
};
+ /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
+ p12v_0: regulator-p12v_0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P12V_0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
+ p12v_1: regulator-p12v_1 {
+ compatible = "regulator-fixed";
+ regulator-name = "P12V_1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
sound {
model = "ODROID-HC4";
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 6/7] arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
` (4 preceding siblings ...)
2021-06-07 6:54 ` [PATCH v2 5/7] arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8 Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator Neil Armstrong
2021-06-14 7:59 ` [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter,
Christian Hewitt, Neil Armstrong
From: Christian Hewitt <christianshewitt@gmail.com>
Add a node for the XT25F128B SPI-NOR flash to make it accessible
from Linux.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index fdad6b994c88..f3f953225bf5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -116,6 +116,20 @@ &sd_emmc_c {
status = "disabled";
};
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&usb {
phys = <&usb2_phy1>;
phy-names = "usb2-phy1";
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
` (5 preceding siblings ...)
2021-06-07 6:54 ` [PATCH v2 6/7] arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4 Neil Armstrong
@ 2021-06-07 6:54 ` Neil Armstrong
2021-06-12 19:49 ` Martin Blumenstingl
2021-06-14 7:59 ` [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
7 siblings, 1 reply; 11+ messages in thread
From: Neil Armstrong @ 2021-06-07 6:54 UTC (permalink / raw)
To: khilman, jbrunet, martin.blumenstingl
Cc: linux-amlogic, linux-arm-kernel, linux-kernel, tobetter, Neil Armstrong
Drop the hub_5v regulator which controls the HUB Reset line with GPIOH_4 which
is already controlled by a GPIO HOG.
Until we can properly describe how to control USB HUBs reset lines, keeping
the GPIO HOG is an acceptable solution we use on multiple boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 17 -----------------
1 file changed, 17 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 8c327c03d845..8c30ce63686e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -23,18 +23,6 @@ led-blue {
};
};
- hub_5v: regulator-hub_5v {
- compatible = "regulator-fixed";
- regulator-name = "HUB_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the Hub CHIPENABLE, LOW sets low power state */
- gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
sound {
model = "ODROID-C4";
};
@@ -58,8 +46,3 @@ hog-0 {
&ir {
linux,rc-map-name = "rc-odroid";
};
-
-&usb2_phy1 {
- /* Enable the hub which is connected to this port */
- phy-supply = <&hub_5v>;
-};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio
2021-06-07 6:54 ` [PATCH v2 3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio Neil Armstrong
@ 2021-06-12 19:49 ` Martin Blumenstingl
0 siblings, 0 replies; 11+ messages in thread
From: Martin Blumenstingl @ 2021-06-12 19:49 UTC (permalink / raw)
To: Neil Armstrong
Cc: khilman, jbrunet, linux-amlogic, linux-arm-kernel, linux-kernel,
tobetter
On Mon, Jun 7, 2021 at 8:54 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> As described in the Odroid-C4 & Odroid-HC4 schematics, the 5V regulator is controlled
> by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
2021-06-07 6:54 ` [PATCH v2 7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator Neil Armstrong
@ 2021-06-12 19:49 ` Martin Blumenstingl
0 siblings, 0 replies; 11+ messages in thread
From: Martin Blumenstingl @ 2021-06-12 19:49 UTC (permalink / raw)
To: Neil Armstrong
Cc: khilman, jbrunet, linux-amlogic, linux-arm-kernel, linux-kernel,
tobetter
On Mon, Jun 7, 2021 at 8:54 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Drop the hub_5v regulator which controls the HUB Reset line with GPIOH_4 which
> is already controlled by a GPIO HOG.
>
> Until we can properly describe how to control USB HUBs reset lines, keeping
> the GPIO HOG is an acceptable solution we use on multiple boards.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
` (6 preceding siblings ...)
2021-06-07 6:54 ` [PATCH v2 7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator Neil Armstrong
@ 2021-06-14 7:59 ` Neil Armstrong
7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2021-06-14 7:59 UTC (permalink / raw)
To: Neil Armstrong, martin.blumenstingl, khilman, jbrunet
Cc: tobetter, linux-kernel, linux-amlogic, linux-arm-kernel
Hi,
On Mon, 7 Jun 2021 08:54:28 +0200, Neil Armstrong wrote:
> Here is a collection of fixes/small additions to Odroid-C4 & Odroid-HC4 concerning
> regulators handling, USB and SPI NOR Flash of HC4.
>
> Changes from v1 at [1]:
> - added review tags from martin
> - removed invalid patch about hub_5v
> - added proper vcc_5v gpio control
> - removed invalid hub_5v regulator already controlled by a gpio hog
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.14/dt64)
[1/7] arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator
https://git.kernel.org/amlogic/c/1f80a5cf74a60997b92d2cde772edec093bec4d9
[2/7] arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
https://git.kernel.org/amlogic/c/7881df51368027b2d3fed3dcd43b480f45157d81
[3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio
https://git.kernel.org/amlogic/c/45d736ab17b44257e15e75e0dba364139fdb0983
[4/7] arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
https://git.kernel.org/amlogic/c/703e84d6615a4a95fb504c8f2e4c9426b86f3930
[5/7] arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
https://git.kernel.org/amlogic/c/164147f094ec5d0fc2c2098a888f4b50cf3096a7
[6/7] arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
https://git.kernel.org/amlogic/c/7178f340e9299dc886e6ddf6e938f09967902109
[7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
https://git.kernel.org/amlogic/c/303d2af21aedeaebe824411fbff912dfcdb48de5
--
Neil
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-06-14 8:02 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-07 6:54 [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 1/7] arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 2/7] arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 3/7] arm64: dts: meson-sm1-odroid: add 5v regulator gpio Neil Armstrong
2021-06-12 19:49 ` Martin Blumenstingl
2021-06-07 6:54 ` [PATCH v2 4/7] arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 5/7] arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 6/7] arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4 Neil Armstrong
2021-06-07 6:54 ` [PATCH v2 7/7] arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator Neil Armstrong
2021-06-12 19:49 ` Martin Blumenstingl
2021-06-14 7:59 ` [PATCH v2 0/7] arm64: dts: meson-sm1-odroid: various fixes for C4/HC4 Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).