Re: [PATCH 5/8] pinctrl: qcom/pinctrl-spmi-gpio: Add compatibles for pmic-gpios on SA8155p-adp

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Mon 07 Jun 06:38 CDT 2021, Bhupesh Sharma wrote:

> SA8155p-adp PMICs (PMM8155AU_1 and PMM8155AU_2) expose
> the following PMIC GPIO blocks:
> 
> - PMM8155AU_1: gpio1-gpio10 (with holes on gpio2, gpio5, gpio7 and gpio8)
> - PMM8155AU_2: gpio1-gpio10 (with holes on gpio2, gpio5, gpio7)
> 
> Add support for the same in the pinctrl driver.
> 
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-gpio@vger.kernel.org
> Cc: bhupesh.linux@gmail.com
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index 00870da0c94e..890c44b6e198 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1127,6 +1127,10 @@ static const struct of_device_id pmic_gpio_of_match[] = {
>  	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
>  	/* pm8150l has 12 GPIOs with holes on 7 */
>  	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
> +	/* pmm8155au-1 has 10 GPIOs with holes on 2, 5, 7 and 8 */
> +	{ .compatible = "qcom,pmm8155au-1-gpio", .data = (void *) 10 },

As noted in the binding, I think this should be "qcom,pmm8155au-gpio"
and please skip the comment about the holes.

Thanks,
Bjorn

> +	/* pmm8155au-2 has 10 GPIOs with holes on 2, 5 and 7 */
> +	{ .compatible = "qcom,pmm8155au-2-gpio", .data = (void *) 10 },
>  	{ .compatible = "qcom,pm8350-gpio", .data = (void *) 10 },
>  	{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
>  	{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
> -- 
> 2.31.1
>