From: Logan Gunthorpe <logang@deltatee.com>
To: linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org,
linux-block@vger.kernel.org, Omar Sandoval <osandov@osandov.com>
Cc: Sagi Grimberg <sagi@grimberg.me>,
Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>,
Stephen Bates <sbates@raithlin.com>,
Logan Gunthorpe <logang@deltatee.com>
Subject: [PATCH blktests v2 00/11] NVMe Target Passthru Block Tests
Date: Wed, 30 Sep 2020 12:54:11 -0600 [thread overview]
Message-ID: <20200930185422.11494-1-logang@deltatee.com> (raw)
Hi,
This series adds blktests for the nvmet passthru feature that was merged
for 5.9. It's been reconciled with Sagi's blktest series that Omar
recently merged.
This series is based off of the current blktests master and a git repo is
available for this here:
https://github.com/Eideticom/blktests nvmet_passthru_v2
Thanks,
Logan
--
Changes in v2:
- Rebased on latest blktests master and changed to use the common
helpers Sagi introduced in his series
- Collected Chaitanya's reviewed-by tag
--
Logan Gunthorpe (11):
common/fio: Remove state file in common helper
common/xfs: Create common helper to check for XFS support
common/xfs: Create common helper to verify block device with xfs
nvme: Search for specific subsysnqn in _find_nvme_loop_dev
nvme: Add common helpers for passthru tests
nvme/033: Simple test to create and connect to a passthru target
nvme/034: Add test for passthru data verification
nvme/035: Add test to verify passthru controller with a filesystem
nvme/036: Add test for testing reset command on nvme-passthru
nvme/037: Add test which loops passthru connect and disconnect
nvme/038: Test removal of un-enabled subsystem and ports
common/fio | 1 +
common/rc | 8 +++++
common/xfs | 33 ++++++++++++++++++
tests/nvme/004 | 2 +-
tests/nvme/005 | 2 +-
tests/nvme/008 | 2 +-
tests/nvme/009 | 2 +-
tests/nvme/010 | 3 +-
tests/nvme/011 | 3 +-
tests/nvme/012 | 23 ++++---------
tests/nvme/013 | 21 +++---------
tests/nvme/014 | 2 +-
tests/nvme/015 | 2 +-
tests/nvme/018 | 2 +-
tests/nvme/019 | 2 +-
tests/nvme/020 | 2 +-
tests/nvme/021 | 2 +-
tests/nvme/022 | 2 +-
tests/nvme/023 | 2 +-
tests/nvme/024 | 2 +-
tests/nvme/025 | 2 +-
tests/nvme/026 | 2 +-
tests/nvme/027 | 2 +-
tests/nvme/028 | 2 +-
tests/nvme/029 | 2 +-
tests/nvme/033 | 67 +++++++++++++++++++++++++++++++++++++
tests/nvme/033.out | 7 ++++
tests/nvme/034 | 35 +++++++++++++++++++
tests/nvme/034.out | 3 ++
tests/nvme/035 | 37 +++++++++++++++++++++
tests/nvme/035.out | 3 ++
tests/nvme/036 | 37 +++++++++++++++++++++
tests/nvme/036.out | 3 ++
tests/nvme/037 | 35 +++++++++++++++++++
tests/nvme/037.out | 2 ++
tests/nvme/038 | 36 ++++++++++++++++++++
tests/nvme/038.out | 2 ++
tests/nvme/rc | 83 ++++++++++++++++++++++++++++++++++++++++++++--
38 files changed, 420 insertions(+), 58 deletions(-)
create mode 100644 common/xfs
create mode 100755 tests/nvme/033
create mode 100644 tests/nvme/033.out
create mode 100755 tests/nvme/034
create mode 100644 tests/nvme/034.out
create mode 100755 tests/nvme/035
create mode 100644 tests/nvme/035.out
create mode 100755 tests/nvme/036
create mode 100644 tests/nvme/036.out
create mode 100755 tests/nvme/037
create mode 100644 tests/nvme/037.out
create mode 100755 tests/nvme/038
create mode 100644 tests/nvme/038.out
base-commit: 20445c5eb6456addca9131ec6917d2a2d7414e04
--
2.20.1
next reply other threads:[~2020-09-30 19:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 18:54 Logan Gunthorpe [this message]
2020-09-30 18:54 ` [PATCH blktests v2 01/11] common/fio: Remove state file in common helper Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 02/11] common/xfs: Create common helper to check for XFS support Logan Gunthorpe
2020-10-06 23:44 ` Chaitanya Kulkarni
2020-10-06 23:51 ` Logan Gunthorpe
2020-10-07 0:58 ` Chaitanya Kulkarni
2020-09-30 18:54 ` [PATCH blktests v2 03/11] common/xfs: Create common helper to verify block device with xfs Logan Gunthorpe
2020-10-06 23:50 ` Chaitanya Kulkarni
2020-10-06 23:59 ` Logan Gunthorpe
[not found] ` <BYAPR04MB49652338A4FE3805F9394A88860A0@BYAPR04MB4965.namprd04.prod.outlook.com>
2020-10-07 15:53 ` Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 04/11] nvme: Search for specific subsysnqn in _find_nvme_loop_dev Logan Gunthorpe
2020-10-06 23:55 ` Chaitanya Kulkarni
2020-10-07 0:10 ` Logan Gunthorpe
[not found] ` <BYAPR04MB49650C6419A84705D04FFE63860A0@BYAPR04MB4965.namprd04.prod.outlook.com>
2020-10-07 15:55 ` Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 05/11] nvme: Add common helpers for passthru tests Logan Gunthorpe
2020-10-07 0:02 ` Chaitanya Kulkarni
2020-10-07 0:13 ` Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 06/11] nvme/033: Simple test to create and connect to a passthru target Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 07/11] nvme/034: Add test for passthru data verification Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 08/11] nvme/035: Add test to verify passthru controller with a filesystem Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 09/11] nvme/036: Add test for testing reset command on nvme-passthru Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 10/11] nvme/037: Add test which loops passthru connect and disconnect Logan Gunthorpe
2020-09-30 18:54 ` [PATCH blktests v2 11/11] nvme/038: Test removal of un-enabled subsystem and ports Logan Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930185422.11494-1-logang@deltatee.com \
--to=logang@deltatee.com \
--cc=Chaitanya.Kulkarni@wdc.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=osandov@osandov.com \
--cc=sagi@grimberg.me \
--cc=sbates@raithlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).