* PTS test case (GATT/SR/UNS/BI-01-C) fails with Bluez 5.50
@ 2019-07-03 14:39 Edward Fung
2019-07-03 15:07 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 4+ messages in thread
From: Edward Fung @ 2019-07-03 14:39 UTC (permalink / raw)
To: linux-bluetooth
Hello team,
I'm performing PTS testing (PTS 7.4.1 Build 2 and Bluez 5.50 stack)
for SIG certification and the test case GATT/SR/UNS/BI-01-C always
fails with the following response error codes. Can anyone shed some
light on this? Thank you!
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 010C-0000-04
- Invalid Error Code received. Expected=0x06 Received =0x4.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 010E-0000-01
- Invalid Error Code received. Expected=0x06 Received =0x1.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 0116-0102-01
- Invalid request handle received. Expected=0x0000 Received =0x201.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PTS test case (GATT/SR/UNS/BI-01-C) fails with Bluez 5.50
2019-07-03 14:39 PTS test case (GATT/SR/UNS/BI-01-C) fails with Bluez 5.50 Edward Fung
@ 2019-07-03 15:07 ` Luiz Augusto von Dentz
2019-07-03 15:35 ` Edward Fung
0 siblings, 1 reply; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2019-07-03 15:07 UTC (permalink / raw)
To: Edward Fung; +Cc: linux-bluetooth
Hi,
On Wed, Jul 3, 2019 at 5:42 PM Edward Fung <jjsheepman@gmail.com> wrote:
>
> Hello team,
>
> I'm performing PTS testing (PTS 7.4.1 Build 2 and Bluez 5.50 stack)
> for SIG certification and the test case GATT/SR/UNS/BI-01-C always
> fails with the following response error codes. Can anyone shed some
> light on this? Thank you!
>
> Test case : GATT/SR/UNS/BI-01-C started
> - Running test case with ATT bearer setup over BR/EDR.
> - BR/EDR Connection setup successfully.
> - BR Security not initiated due to TSPX_security_enabled value.
> - Sending an ATT request with an unsupported opcode.
> - Received data 010C-0000-04
> - Invalid Error Code received. Expected=0x06 Received =0x4.
> - Connection terminated successfully.
> -Final Verdict: FAIL
> GATT/SR/UNS/BI-01-C finished
>
> Test case : GATT/SR/UNS/BI-01-C started
> - Running test case with ATT bearer setup over BR/EDR.
> - BR/EDR Connection setup successfully.
> - BR Security not initiated due to TSPX_security_enabled value.
> - Sending an ATT request with an unsupported opcode.
> - Received data 010E-0000-01
> - Invalid Error Code received. Expected=0x06 Received =0x1.
> - Connection terminated successfully.
> -Final Verdict: FAIL
> GATT/SR/UNS/BI-01-C finished
>
> Test case : GATT/SR/UNS/BI-01-C started
> - Running test case with ATT bearer setup over BR/EDR.
> - BR/EDR Connection setup successfully.
> - BR Security not initiated due to TSPX_security_enabled value.
> - Sending an ATT request with an unsupported opcode.
> - Received data 0116-0102-01
> - Invalid request handle received. Expected=0x0000 Received =0x201.
> - Connection terminated successfully.
> -Final Verdict: FAIL
> GATT/SR/UNS/BI-01-C finished
Is this all the same test which cause different errors to be reported?
It seems to expect request not supported over invalid PDU, but the
second one is returning invalid handle which is weird, do you have the
HCI for these runs?
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PTS test case (GATT/SR/UNS/BI-01-C) fails with Bluez 5.50
2019-07-03 15:07 ` Luiz Augusto von Dentz
@ 2019-07-03 15:35 ` Edward Fung
2019-07-03 16:03 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 4+ messages in thread
From: Edward Fung @ 2019-07-03 15:35 UTC (permalink / raw)
To: Luiz Augusto von Dentz; +Cc: linux-bluetooth
Hello Luiz,
Yes, this is the same test with 3 different errors reported by the
PTS. The HCI commands for each error code are included as below.
Thanks!
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 0116-0102-01
- Invalid request handle received. Expected=0x0000 Received =0x201.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:1B:DC:F2:1C:E0 class 0x040110 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr 00:1B:DC:F2:1C:E0 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 12 page 1 max 2
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:F2:1C:E0 mode 2 clkoffset 0x0000
< ACL data: handle 12 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0038
Enhanced Retransmission mode
Streaming mode
FCS Option
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 name 'PTS-GATT-E01C'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x01 oob 0x00 auth 0x00
Capability: DisplayYesNo (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:F2:1C:E0
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:F2:1C:E0 passkey 421373
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:1B:DC:F2:1C:E0 key 9817E8842AA1BDD8469E76A4E83ACEB6 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 12 encrypt 0x01
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 31 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 517
< ACL data: handle 12 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 24
L2CAP(d): cid 0x0040 len 20 [psm 31]
ATT: Prepare Write req (0x16)
attr handle 0x0201, value offset 0x0403
part attr value 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d
0x0e 0x0f 0x10 0x11 0x12 0x13
< ACL data: handle 12 flags 0x00 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 31]
ATT: Error (0x01)
Error: Invalid handle (1)
Prepare Write req (0x16) on handle 0x0201
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 31]
ATT: Read By Group resp (0x11)
attr handle 0x0001, end group handle 0x0007
value 0x00 0x18
attr handle 0x0010, end group handle 0x0015
value 0x01 0x18
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0016, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 12 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 12 reason 0x16
Reason: Connection Terminated by Local Host
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 010E-0000-01
- Invalid Error Code received. Expected=0x06 Received =0x1.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
root@cci:~# hcidump -x
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:1B:DC:F2:1C:E0 class 0x040110 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr 00:1B:DC:F2:1C:E0 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 12 page 1 max 2
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:F2:1C:E0 mode 2 clkoffset 0x0000
< ACL data: handle 12 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0038
Enhanced Retransmission mode
Streaming mode
FCS Option
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 name 'PTS-GATT-E01C'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x01 oob 0x00 auth 0x00
Capability: DisplayYesNo (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:F2:1C:E0
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:F2:1C:E0 passkey 605930
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:1B:DC:F2:1C:E0 key 487D2063247B68F6031E9D08DB53F9C5 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 12 encrypt 0x01
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 31 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 517
< ACL data: handle 12 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 31]
ATT: Read Multi req (0x0e)
Handles
handle 0x0201
handle 0x0403
handle 0x0605
handle 0x0807
handle 0x0a09
handle 0x0c0b
handle 0x0e0d
< ACL data: handle 12 flags 0x00 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 31]
ATT: Error (0x01)
Error: Invalid handle (1)
Read Multi req (0x0e) on handle 0x0000
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 31]
ATT: Read By Group resp (0x11)
attr handle 0x0001, end group handle 0x0007
value 0x00 0x18
attr handle 0x0010, end group handle 0x0015
value 0x01 0x18
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0016, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 12 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 12 reason 0x16
Reason: Connection Terminated by Local Host
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 010C-0000-04
- Invalid Error Code received. Expected=0x06 Received =0x4.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:1B:DC:F2:1C:E0 class 0x040110 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 11 bdaddr 00:1B:DC:F2:1C:E0 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 11 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 11
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 11 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 11 page 1 max 2
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:F2:1C:E0 mode 2 clkoffset 0x0000
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0038
Enhanced Retransmission mode
Streaming mode
FCS Option
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 name 'PTS-GATT-E01C'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x01 oob 0x00 auth 0x00
Capability: DisplayYesNo (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:F2:1C:E0
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:F2:1C:E0 passkey 285477
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:1B:DC:F2:1C:E0 key D4B8F555619DFB62C87970AA22E15515 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x01
> ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 31 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 11 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 517
< ACL data: handle 11 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
< ACL data: handle 11 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 22
L2CAP(d): cid 0x0040 len 18 [psm 31]
ATT: Read Blob req (0x0c)
handle 0x0201 offset 0x0403
< ACL data: handle 11 flags 0x00 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 31]
ATT: Error (0x01)
Error: Invalid PDU (4)
Read Blob req (0x0c) on handle 0x0000
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 31]
ATT: Read By Group resp (0x11)
attr handle 0x0001, end group handle 0x0007
value 0x00 0x18
attr handle 0x0010, end group handle 0x0015
value 0x01 0x18
< ACL data: handle 11 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0016, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 11 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 11 reason 0x16
Reason: Connection Terminated by Local Host
On Wed, Jul 3, 2019 at 8:07 AM Luiz Augusto von Dentz
<luiz.dentz@gmail.com> wrote:
>
> Hi,
>
> On Wed, Jul 3, 2019 at 5:42 PM Edward Fung <jjsheepman@gmail.com> wrote:
> >
> > Hello team,
> >
> > I'm performing PTS testing (PTS 7.4.1 Build 2 and Bluez 5.50 stack)
> > for SIG certification and the test case GATT/SR/UNS/BI-01-C always
> > fails with the following response error codes. Can anyone shed some
> > light on this? Thank you!
> >
> > Test case : GATT/SR/UNS/BI-01-C started
> > - Running test case with ATT bearer setup over BR/EDR.
> > - BR/EDR Connection setup successfully.
> > - BR Security not initiated due to TSPX_security_enabled value.
> > - Sending an ATT request with an unsupported opcode.
> > - Received data 010C-0000-04
> > - Invalid Error Code received. Expected=0x06 Received =0x4.
> > - Connection terminated successfully.
> > -Final Verdict: FAIL
> > GATT/SR/UNS/BI-01-C finished
> >
> > Test case : GATT/SR/UNS/BI-01-C started
> > - Running test case with ATT bearer setup over BR/EDR.
> > - BR/EDR Connection setup successfully.
> > - BR Security not initiated due to TSPX_security_enabled value.
> > - Sending an ATT request with an unsupported opcode.
> > - Received data 010E-0000-01
> > - Invalid Error Code received. Expected=0x06 Received =0x1.
> > - Connection terminated successfully.
> > -Final Verdict: FAIL
> > GATT/SR/UNS/BI-01-C finished
> >
> > Test case : GATT/SR/UNS/BI-01-C started
> > - Running test case with ATT bearer setup over BR/EDR.
> > - BR/EDR Connection setup successfully.
> > - BR Security not initiated due to TSPX_security_enabled value.
> > - Sending an ATT request with an unsupported opcode.
> > - Received data 0116-0102-01
> > - Invalid request handle received. Expected=0x0000 Received =0x201.
> > - Connection terminated successfully.
> > -Final Verdict: FAIL
> > GATT/SR/UNS/BI-01-C finished
>
> Is this all the same test which cause different errors to be reported?
> It seems to expect request not supported over invalid PDU, but the
> second one is returning invalid handle which is weird, do you have the
> HCI for these runs?
>
> --
> Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PTS test case (GATT/SR/UNS/BI-01-C) fails with Bluez 5.50
2019-07-03 15:35 ` Edward Fung
@ 2019-07-03 16:03 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2019-07-03 16:03 UTC (permalink / raw)
To: Edward Fung; +Cc: linux-bluetooth
Hi Edward,
On Wed, Jul 3, 2019 at 6:35 PM Edward Fung <jjsheepman@gmail.com> wrote:
>
> Hello Luiz,
>
> Yes, this is the same test with 3 different errors reported by the
> PTS. The HCI commands for each error code are included as below.
> Thanks!
>
> Test case : GATT/SR/UNS/BI-01-C started
> - Running test case with ATT bearer setup over BR/EDR.
> - BR/EDR Connection setup successfully.
> - BR Security not initiated due to TSPX_security_enabled value.
> - Sending an ATT request with an unsupported opcode.
> - Received data 0116-0102-01
> - Invalid request handle received. Expected=0x0000 Received =0x201.
> - Connection terminated successfully.
> -Final Verdict: FAIL
> GATT/SR/UNS/BI-01-C finished
>
> > ACL data: handle 12 flags 0x02 dlen 24
> L2CAP(d): cid 0x0040 len 20 [psm 31]
> ATT: Prepare Write req (0x16)
> attr handle 0x0201, value offset 0x0403
> part attr value 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d
> 0x0e 0x0f 0x10 0x11 0x12 0x13
> < ACL data: handle 12 flags 0x00 dlen 9
> L2CAP(d): cid 0x0040 len 5 [psm 31]
> ATT: Error (0x01)
> Error: Invalid handle (1)
> Prepare Write req (0x16) on handle 0x0201
Weird does the prepare don't require to return the handle on the
error? The spec don't seem to mention that.
> > ACL data: handle 12 flags 0x02 dlen 18
> L2CAP(d): cid 0x0040 len 14 [psm 31]
> ATT: Read By Group resp (0x11)
> attr handle 0x0001, end group handle 0x0007
> value 0x00 0x18
> attr handle 0x0010, end group handle 0x0015
> value 0x01 0x18
> < ACL data: handle 12 flags 0x00 dlen 11
> L2CAP(d): cid 0x0040 len 7 [psm 31]
> ATT: Read By Group req (0x10)
> start 0x0016, end 0xffff
> type-uuid 0x2800
> Test case : GATT/SR/UNS/BI-01-C started
> - Running test case with ATT bearer setup over BR/EDR.
> - BR/EDR Connection setup successfully.
> - BR Security not initiated due to TSPX_security_enabled value.
> - Sending an ATT request with an unsupported opcode.
> - Received data 010E-0000-01
> - Invalid Error Code received. Expected=0x06 Received =0x1.
> - Connection terminated successfully.
> -Final Verdict: FAIL
> GATT/SR/UNS/BI-01-C finished
>
> > ACL data: handle 12 flags 0x02 dlen 19
> L2CAP(d): cid 0x0040 len 15 [psm 31]
> ATT: Read Multi req (0x0e)
> Handles
> handle 0x0201
> handle 0x0403
> handle 0x0605
> handle 0x0807
> handle 0x0a09
> handle 0x0c0b
> handle 0x0e0d
> < ACL data: handle 12 flags 0x00 dlen 9
> L2CAP(d): cid 0x0040 len 5 [psm 31]
> ATT: Error (0x01)
> Error: Invalid handle (1)
> Read Multi req (0x0e) on handle 0x0000
Here I think we do have to set the handle and we are not doing it,
this is probably an error on our side but invalidate the first error
since there we would be doing exactly what this failure is suggesting.
> > ACL data: handle 12 flags 0x02 dlen 18
> L2CAP(d): cid 0x0040 len 14 [psm 31]
> ATT: Read By Group resp (0x11)
> attr handle 0x0001, end group handle 0x0007
> value 0x00 0x18
> attr handle 0x0010, end group handle 0x0015
> value 0x01 0x18
> < ACL data: handle 12 flags 0x00 dlen 11
> L2CAP(d): cid 0x0040 len 7 [psm 31]
> ATT: Read By Group req (0x10)
> start 0x0016, end 0xffff
> type-uuid 0x2800
>
> Test case : GATT/SR/UNS/BI-01-C started
> - Running test case with ATT bearer setup over BR/EDR.
> - BR/EDR Connection setup successfully.
> - BR Security not initiated due to TSPX_security_enabled value.
> - Sending an ATT request with an unsupported opcode.
> - Received data 010C-0000-04
> - Invalid Error Code received. Expected=0x06 Received =0x4.
> - Connection terminated successfully.
> -Final Verdict: FAIL
> GATT/SR/UNS/BI-01-C finished
> > ACL data: handle 11 flags 0x02 dlen 22
> L2CAP(d): cid 0x0040 len 18 [psm 31]
> ATT: Read Blob req (0x0c)
> handle 0x0201 offset 0x0403
> < ACL data: handle 11 flags 0x00 dlen 9
> L2CAP(d): cid 0x0040 len 5 [psm 31]
> ATT: Error (0x01)
> Error: Invalid PDU (4)
> Read Blob req (0x0c) on handle 0x0000
And here as well, we should be setting the handle as in the first
occurrence, but it is saying we should return request not supported
instead?
> > ACL data: handle 11 flags 0x02 dlen 18
> L2CAP(d): cid 0x0040 len 14 [psm 31]
> ATT: Read By Group resp (0x11)
> attr handle 0x0001, end group handle 0x0007
> value 0x00 0x18
> attr handle 0x0010, end group handle 0x0015
> value 0x01 0x18
> < ACL data: handle 11 flags 0x00 dlen 11
> L2CAP(d): cid 0x0040 len 7 [psm 31]
> ATT: Read By Group req (0x10)
> start 0x0016, end 0xffff
> type-uuid 0x2800
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-03 16:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-03 14:39 PTS test case (GATT/SR/UNS/BI-01-C) fails with Bluez 5.50 Edward Fung
2019-07-03 15:07 ` Luiz Augusto von Dentz
2019-07-03 15:35 ` Edward Fung
2019-07-03 16:03 ` Luiz Augusto von Dentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).