From: Oliver Hartkopp <socketcan@hartkopp.net>
To: Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org, linux-kernel@vger.kernel.org,
Max Staudt <max@enpas.org>,
netdev@vger.kernel.org, Geert Uytterhoeven <geert@linux-m68k.org>,
Jakub Kicinski <kuba@kernel.org>
Subject: Re: [PATCH v6 0/7] can: refactoring of can-dev module and of Kbuild
Date: Fri, 10 Jun 2022 23:38:09 +0200 [thread overview]
Message-ID: <bba88460-4f81-aeb1-db35-9d37c48e120f@hartkopp.net> (raw)
In-Reply-To: <20220610143009.323579-1-mailhol.vincent@wanadoo.fr>
On 10.06.22 16:30, Vincent Mailhol wrote:
> Aside of calc_bittiming.o which can be configured with
> CAN_CALC_BITTIMING, all objects from drivers/net/can/dev/ get linked
> unconditionally to can-dev.o even if not needed by the user.
>
> This series first goal it to split the can-dev modules so that the
> only the needed features get built in during compilation.
> Additionally, the CAN Device Drivers menu is moved from the
> "Networking support" category to the "Device Drivers" category (where
> all drivers are supposed to be).
>
>
> * menu before this series *
>
> CAN bus subsystem support
> symbol: CONFIG_CAN
> |
> +-> CAN Device Drivers
> (no symbol)
> |
> +-> software/virtual CAN device drivers
> | (at time of writing: slcan, vcan, vxcan)
> |
> +-> Platform CAN drivers with Netlink support
> symbol: CONFIG_CAN_DEV
> |
> +-> CAN bit-timing calculation (optional for hardware drivers)
> | symbol: CONFIG_CAN_CALC_BITTIMING
> |
> +-> All other CAN devices drivers
>
> * menu after this series *
>
> Network device support
> symbol: CONFIG_NETDEVICES
> |
> +-> CAN Device Drivers
> symbol: CONFIG_CAN_DEV
> |
> +-> software/virtual CAN device drivers
> | (at time of writing: slcan, vcan, vxcan)
> |
> +-> CAN device drivers with Netlink support
> symbol: CONFIG_CAN_NETLINK (matches previous CONFIG_CAN_DEV)
> |
> +-> CAN bit-timing calculation (optional for all drivers)
> | symbol: CONFIG_CAN_CALC_BITTIMING
> |
> +-> All other CAN devices drivers
> (some may select CONFIG_CAN_RX_OFFLOAD)
> |
> +-> CAN rx offload (automatically selected by some drivers)
> (hidden symbol: CONFIG_CAN_RX_OFFLOAD)
>
> Patches 1 to 5 of this series do above modification.
>
> The last two patches add a check toward CAN_CTRLMODE_LISTENONLY in
> can_dropped_invalid_skb() to discard tx skb (such skb can potentially
> reach the driver if injected via the packet socket). In more details,
> patch 6 moves can_dropped_invalid_skb() from skb.h to skb.o and patch
> 7 is the actual change.
>
> Those last two patches are actually connected to the first five ones:
> because slcan and v(x)can requires can_dropped_invalid_skb(), it was
> necessary to add those three devices to the scope of can-dev before
> moving the function to skb.o.
>
> This design results from the lengthy discussion in [1].
>
> [1] https://lore.kernel.org/linux-can/20220514141650.1109542-1-mailhol.vincent@wanadoo.fr/
>
>
> ** Changelog **
>
> v5 -> v6:
>
> * fix typo in patch #1's title: Kbuild -> Kconfig.
>
> * make CONFIG_RX_CAN an hidden config symbol and modify the diagram
> in the cover letter accordingly.
>
> @Oliver, with CONFIG_CAN_RX_OFFLOAD now being an hidden config,
> that option fully depends on the drivers. So contrary to your
> suggestion, I put CONFIG_CAN_RX_OFFLOAD below the device drivers
> in the diagram.
Yes, fine for me.
I did some Kconfig configuration tests and built the drivers to see
vcan.ko depending on can-dev.ko at module loading the first time ;-)
Nice work.
So for these bits I can provide a
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Thanks,
Oliver
>
> * fix typo in cover letter: CONFIG_CAN_BITTIMING -> CONFIG_CAN_CALC_BITTIMING.
>
> v4 -> v5:
>
> * m_can is also requires RX offload. Add the "select CAN_RX_OFFLOAD"
> to its Makefile.
>
> * Reorder the lines of drivers/net/can/dev/Makefile.
>
> * Remove duplicated rx-offload.o target in drivers/net/can/dev/Makefile
>
> * Remove the Nota Bene in the cover letter.
>
>
> v3 -> v4:
>
> * Five additional patches added to split can-dev module and refactor
> Kbuild. c.f. below (lengthy) thread:
> https://lore.kernel.org/linux-can/20220514141650.1109542-1-mailhol.vincent@wanadoo.fr/
>
>
> v2 -> v3:
>
> * Apply can_dropped_invalid_skb() to slcan.
>
> * Make vcan, vxcan and slcan dependent of CONFIG_CAN_DEV by
> modifying Kbuild.
>
> * fix small typos.
>
> v1 -> v2:
>
> * move can_dropped_invalid_skb() to skb.c instead of dev.h
>
> * also move can_skb_headroom_valid() to skb.c
>
> Vincent Mailhol (7):
> can: Kconfig: rename config symbol CAN_DEV into CAN_NETLINK
> can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using
> CAN_DEV
> can: bittiming: move bittiming calculation functions to
> calc_bittiming.c
> can: Kconfig: add CONFIG_CAN_RX_OFFLOAD
> net: Kconfig: move the CAN device menu to the "Device Drivers" section
> can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid()
> to skb.c
> can: skb: drop tx skb if in listen only mode
>
> drivers/net/Kconfig | 2 +
> drivers/net/can/Kconfig | 55 +++++--
> drivers/net/can/dev/Makefile | 17 ++-
> drivers/net/can/dev/bittiming.c | 197 -------------------------
> drivers/net/can/dev/calc_bittiming.c | 202 ++++++++++++++++++++++++++
> drivers/net/can/dev/dev.c | 9 +-
> drivers/net/can/dev/skb.c | 72 +++++++++
> drivers/net/can/m_can/Kconfig | 1 +
> drivers/net/can/spi/mcp251xfd/Kconfig | 1 +
> include/linux/can/skb.h | 59 +-------
> net/can/Kconfig | 5 +-
> 11 files changed, 338 insertions(+), 282 deletions(-)
> create mode 100644 drivers/net/can/dev/calc_bittiming.c
>
next prev parent reply other threads:[~2022-06-10 21:38 UTC|newest]
Thread overview: 119+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 14:23 [PATCH 0/2] can: drop tx skb if the device is in listen only mode Vincent Mailhol
2022-05-13 14:23 ` [PATCH 1/2] can: move can_dropped_invalid_skb from skb.h to dev.h Vincent Mailhol
2022-05-13 14:23 ` [PATCH 2/2] can: dev: drop tx skb if in listen only mode Vincent Mailhol
2022-05-13 14:42 ` [PATCH 0/2] can: drop tx skb if the device is " Marc Kleine-Budde
2022-05-13 15:20 ` Vincent MAILHOL
2022-05-13 15:36 ` [PATCH v2 " Vincent Mailhol
2022-05-13 15:36 ` [PATCH v2 1/2] can: skb:: move can_dropped_invalid_skb and can_skb_headroom_valid to skb.c Vincent Mailhol
2022-05-14 4:20 ` kernel test robot
2022-05-14 5:16 ` Vincent MAILHOL
2022-05-14 11:17 ` Max Staudt
2022-05-13 15:36 ` [PATCH v2 2/2] can: dev: drop tx skb if in listen only mode Vincent Mailhol
2022-05-13 17:40 ` [PATCH v2 0/2] can: drop tx skb if the device is " Max Staudt
2022-05-14 3:00 ` Vincent MAILHOL
2022-05-14 14:16 ` [PATCH v3 0/4] can: can_dropped_invalid_skb() and Kbuild changes Vincent Mailhol
2022-05-14 14:16 ` [PATCH v3 1/4] can: slcan: use can_dropped_invalid_skb() instead of manual check Vincent Mailhol
2022-05-16 20:40 ` Marc Kleine-Budde
2022-05-14 14:16 ` [PATCH v3 2/4] can: Kconfig: change CAN_DEV into a menuconfig Vincent Mailhol
2022-05-14 14:16 ` [PATCH v3 3/4] can: skb:: move can_dropped_invalid_skb and can_skb_headroom_valid to skb.c Vincent Mailhol
2022-05-15 19:17 ` Oliver Hartkopp
2022-05-17 1:50 ` Vincent MAILHOL
2022-05-17 4:12 ` Max Staudt
2022-05-17 6:08 ` Marc Kleine-Budde
2022-05-17 7:04 ` Vincent MAILHOL
2022-05-17 10:45 ` Marc Kleine-Budde
2022-05-17 11:51 ` Oliver Hartkopp
2022-05-17 12:14 ` Max Staudt
2022-05-17 12:21 ` Marc Kleine-Budde
2022-05-17 12:39 ` Max Staudt
2022-05-17 13:35 ` Oliver Hartkopp
2022-05-17 13:43 ` Max Staudt
2022-05-17 14:23 ` Marc Kleine-Budde
2022-05-17 14:35 ` Oliver Hartkopp
2022-05-17 15:38 ` Max Staudt
2022-05-17 15:50 ` Oliver Hartkopp
2022-05-17 17:52 ` Max Staudt
2022-05-18 12:03 ` Vincent MAILHOL
2022-05-18 12:12 ` Device Drivers: (was: Re: [PATCH v3 3/4] can: skb:: move can_dropped_invalid_skb and can_skb_headroom_valid to skb.c) Marc Kleine-Budde
2022-05-18 12:45 ` Oliver Hartkopp
2022-05-18 13:10 ` [PATCH v3 3/4] can: skb:: move can_dropped_invalid_skb and can_skb_headroom_valid to skb.c Oliver Hartkopp
2022-05-18 13:28 ` Marc Kleine-Budde
2022-05-18 14:07 ` Vincent MAILHOL
2022-05-18 14:33 ` Oliver Hartkopp
2022-05-18 14:36 ` Marc Kleine-Budde
2022-05-18 14:38 ` Oliver Hartkopp
2022-05-18 14:55 ` Oliver Hartkopp
2022-05-18 15:38 ` Vincent MAILHOL
2022-05-18 15:48 ` Max Staudt
2022-05-18 16:01 ` Vincent MAILHOL
2022-05-14 14:16 ` [PATCH v3 4/4] can: dev: drop tx skb if in listen only mode Vincent Mailhol
2022-06-03 10:28 ` [PATCH v4 0/7] can: refactoring of can-dev module and of Kbuild Vincent Mailhol
2022-06-03 10:28 ` [PATCH v4 1/7] can: Kbuild: rename config symbol CAN_DEV into CAN_NETLINK Vincent Mailhol
2022-06-03 10:28 ` [PATCH v4 2/7] can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using CAN_DEV Vincent Mailhol
2022-06-04 11:27 ` Marc Kleine-Budde
2022-06-04 12:30 ` Vincent MAILHOL
2022-06-04 12:43 ` Marc Kleine-Budde
2022-06-04 13:46 ` Marc Kleine-Budde
2022-06-03 10:28 ` [PATCH v4 3/7] can: bittiming: move bittiming calculation functions to calc_bittiming.c Vincent Mailhol
2022-06-04 11:25 ` Marc Kleine-Budde
2022-06-04 12:21 ` Vincent MAILHOL
2022-06-04 12:41 ` Marc Kleine-Budde
2022-06-04 12:56 ` Vincent MAILHOL
2022-06-04 13:51 ` Marc Kleine-Budde
2022-06-03 10:28 ` [PATCH v4 4/7] can: Kconfig: add CONFIG_CAN_RX_OFFLOAD Vincent Mailhol
2022-06-04 11:22 ` Marc Kleine-Budde
2022-06-04 12:14 ` Vincent MAILHOL
2022-06-03 10:28 ` [PATCH v4 5/7] net: Kconfig: move the CAN device menu to the "Device Drivers" section Vincent Mailhol
2022-06-03 10:28 ` [PATCH v4 6/7] can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid() to skb.c Vincent Mailhol
2022-06-03 10:28 ` [PATCH v4 7/7] can: skb: drop tx skb if in listen only mode Vincent Mailhol
2022-06-04 11:46 ` [PATCH v4 0/7] can: refactoring of can-dev module and of Kbuild Marc Kleine-Budde
2022-06-04 13:05 ` Vincent MAILHOL
2022-06-04 13:55 ` Marc Kleine-Budde
2022-06-04 14:59 ` Vincent MAILHOL
2022-06-04 15:18 ` Marc Kleine-Budde
2022-06-04 16:32 ` Vincent MAILHOL
2022-06-05 10:39 ` Marc Kleine-Budde
2022-06-05 13:57 ` Vincent MAILHOL
2022-06-05 18:08 ` Marc Kleine-Budde
2022-06-04 16:29 ` [PATCH v5 " Vincent Mailhol
2022-06-04 16:29 ` [PATCH v5 1/7] can: Kbuild: rename config symbol CAN_DEV into CAN_NETLINK Vincent Mailhol
2022-06-04 16:29 ` [PATCH v5 2/7] can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using CAN_DEV Vincent Mailhol
2022-06-04 16:29 ` [PATCH v5 3/7] can: bittiming: move bittiming calculation functions to calc_bittiming.c Vincent Mailhol
2022-06-04 16:29 ` [PATCH v5 4/7] can: Kconfig: add CONFIG_CAN_RX_OFFLOAD Vincent Mailhol
2022-06-07 8:43 ` Geert Uytterhoeven
2022-06-07 9:27 ` Vincent MAILHOL
2022-06-07 16:22 ` Max Staudt
2022-06-07 22:06 ` Jakub Kicinski
2022-06-07 23:40 ` Vincent MAILHOL
2022-06-08 0:07 ` Jakub Kicinski
2022-06-07 23:43 ` Max Staudt
2022-06-08 0:14 ` Jakub Kicinski
2022-06-08 0:22 ` Max Staudt
2022-06-08 1:38 ` Vincent MAILHOL
2022-06-04 16:29 ` [PATCH v5 5/7] net: Kconfig: move the CAN device menu to the "Device Drivers" section Vincent Mailhol
2022-06-04 16:29 ` [PATCH v5 6/7] can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid() to skb.c Vincent Mailhol
2022-06-04 16:30 ` [PATCH v5 7/7] can: skb: drop tx skb if in listen only mode Vincent Mailhol
2022-06-05 17:23 ` [PATCH v5 0/7] can: refactoring of can-dev module and of Kbuild Max Staudt
2022-06-05 18:06 ` Marc Kleine-Budde
2022-06-05 20:46 ` Max Staudt
2022-06-06 0:24 ` Vincent MAILHOL
2022-06-06 19:24 ` Oliver Hartkopp
2022-06-07 2:49 ` Vincent MAILHOL
2022-06-07 7:13 ` Marc Kleine-Budde
2022-06-07 8:49 ` Vincent MAILHOL
2022-06-07 20:12 ` Oliver Hartkopp
2022-06-07 20:27 ` Marc Kleine-Budde
2022-06-07 20:51 ` Oliver Hartkopp
2022-06-07 23:59 ` Vincent MAILHOL
2022-06-08 20:10 ` Oliver Hartkopp
2022-06-10 14:30 ` [PATCH v6 " Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 1/7] can: Kconfig: rename config symbol CAN_DEV into CAN_NETLINK Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 2/7] can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using CAN_DEV Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 3/7] can: bittiming: move bittiming calculation functions to calc_bittiming.c Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 4/7] can: Kconfig: add CONFIG_CAN_RX_OFFLOAD Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 5/7] net: Kconfig: move the CAN device menu to the "Device Drivers" section Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 6/7] can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid() to skb.c Vincent Mailhol
2022-06-10 14:30 ` [PATCH v6 7/7] can: skb: drop tx skb if in listen only mode Vincent Mailhol
2022-06-10 21:38 ` Oliver Hartkopp [this message]
2022-06-10 22:43 ` [PATCH v6 0/7] can: refactoring of can-dev module and of Kbuild Max Staudt
2022-06-11 15:17 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bba88460-4f81-aeb1-db35-9d37c48e120f@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=geert@linux-m68k.org \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=max@enpas.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).