[PATCH V3 03/17] gpio: tegra: use resume_noirq for tegra gpio resume

From: Sowjanya Komatineni <skomatineni@nvidia.com>
To: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<tglx@linutronix.de>, <jason@lakedaemon.net>,
	<marc.zyngier@arm.com>, <linus.walleij@linaro.org>,
	<stefan@agner.ch>, <mark.rutland@arm.com>
Cc: <pdeschrijver@nvidia.com>, <pgaikwad@nvidia.com>,
	<sboyd@kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>, <jckuo@nvidia.com>,
	<josephl@nvidia.com>, <talho@nvidia.com>,
	<skomatineni@nvidia.com>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <mperttunen@nvidia.com>,
	<spatra@nvidia.com>, <robh+dt@kernel.org>, <digetx@gmail.com>,
	<devicetree@vger.kernel.org>
Subject: [PATCH V3 03/17] gpio: tegra: use resume_noirq for tegra gpio resume
Date: Tue, 18 Jun 2019 00:46:17 -0700	[thread overview]
Message-ID: <1560843991-24123-4-git-send-email-skomatineni@nvidia.com> (raw)
In-Reply-To: <1560843991-24123-1-git-send-email-skomatineni@nvidia.com>

During SC7 resume, PARKED bit clear from the pinmux registers may
cause a glitch on the GPIO lines.

So, Tegra GPIOs restore should happen prior to restoring Tegra pinmux
to keep the GPIO lines in a known good state prior to clearing PARKED
bit.

This patch has fix for this by moving Tegra GPIO restore to happen
during resume_noirq.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/gpio/gpio-tegra.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index f57bfc07ae22..f3c58c597ab9 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -410,7 +410,7 @@ static void tegra_gpio_irq_handler(struct irq_desc *desc)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int tegra_gpio_resume(struct device *dev)
+static int tegra_gpio_resume_noirq(struct device *dev)
 {
 	struct tegra_gpio_info *tgi = dev_get_drvdata(dev);
 	unsigned long flags;
@@ -506,6 +506,15 @@ static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
 
 	return irq_set_irq_wake(bank->irq, enable);
 }
+
+static const struct dev_pm_ops tegra_gpio_pm_ops = {
+	.suspend = &tegra_gpio_suspend,
+	.resume_noirq = &tegra_gpio_resume_noirq
+};
+
+#define TEGRA_GPIO_PM	(&tegra_gpio_pm_ops)
+#else
+#define TEGRA_GPIO_PM	NULL
 #endif
 
 #ifdef	CONFIG_DEBUG_FS
@@ -553,10 +562,6 @@ static inline void tegra_gpio_debuginit(struct tegra_gpio_info *tgi)
 
 #endif
 
-static const struct dev_pm_ops tegra_gpio_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume)
-};
-
 static int tegra_gpio_probe(struct platform_device *pdev)
 {
 	struct tegra_gpio_info *tgi;
@@ -706,7 +711,7 @@ static const struct of_device_id tegra_gpio_of_match[] = {
 static struct platform_driver tegra_gpio_driver = {
 	.driver		= {
 		.name	= "tegra-gpio",
-		.pm	= &tegra_gpio_pm_ops,
+		.pm	= TEGRA_GPIO_PM,
 		.of_match_table = tegra_gpio_of_match,
 	},
 	.probe		= tegra_gpio_probe,
-- 
2.7.4

