Re: [PATCH v2 0/5] Initialise thermal framework and cpufreq earlier during boot

[Amit Kucheria <amit.kucheria@verdurent.com>]

This is embarassing. I generated this series incorrectly. It is
missing a patch removing netlink support. v3 coming right up.

Sorry for the noise.

On Thu, Oct 17, 2019 at 4:00 PM Amit Kucheria <amit.kucheria@linaro.org> wrote:
>
> Changes since v1:
> - Completely get rid of netlink support in the thermal framework.
> - This changes the early init patch to a single line - change to
>   core_initcall. Changed authorship of patch since it is nothing like the
>   original. Lina, let me know if you feel otherwise.
> - I've tested to make sure that the qcom-cpufreq-hw driver continues to
>   work correctly as a module so this won't impact Android's GKI plans.
> - Collected Acks
>
> Device boot needs to be as fast as possible while keeping under the thermal
> envelope. Now that thermal framework is built-in to the kernel, we can
> initialize it earlier to enable thermal mitigation during boot.
>
> We also need the cpufreq HW drivers to be initialised earlier to act as the
> cooling devices. This series only converts over the qcom-hw driver to
> initialize earlier but can be extended to other platforms as well.
>
> Amit Kucheria (5):
>   thermal: Initialize thermal subsystem earlier
>   cpufreq: Initialise the governors in core_initcall
>   cpufreq: Initialize cpufreq-dt driver earlier
>   clk: qcom: Initialise clock drivers earlier
>   cpufreq: qcom-hw: Move driver initialisation earlier
>
>  drivers/clk/qcom/clk-rpmh.c            | 2 +-
>  drivers/clk/qcom/gcc-qcs404.c          | 2 +-
>  drivers/clk/qcom/gcc-sdm845.c          | 2 +-
>  drivers/cpufreq/cpufreq-dt-platdev.c   | 2 +-
>  drivers/cpufreq/cpufreq_conservative.c | 2 +-
>  drivers/cpufreq/cpufreq_ondemand.c     | 2 +-
>  drivers/cpufreq/cpufreq_performance.c  | 2 +-
>  drivers/cpufreq/cpufreq_powersave.c    | 2 +-
>  drivers/cpufreq/cpufreq_userspace.c    | 2 +-
>  drivers/cpufreq/qcom-cpufreq-hw.c      | 2 +-
>  drivers/thermal/thermal_core.c         | 3 ++-
>  11 files changed, 12 insertions(+), 11 deletions(-)
>
> --
> 2.17.1
>