devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Adamski <krzysztof.adamski@nokia.com>
To: Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 3/8] hwmon: (tmp421) introduce a channel struct
Date: Tue, 7 Sep 2021 15:43:05 +0200	[thread overview]
Message-ID: <36491db30779131ec67ddd06f3c2bf457a37a16d.1631021349.git.krzysztof.adamski@nokia.com> (raw)
In-Reply-To: <cover.1631021349.git.krzysztof.adamski@nokia.com>

This is a preparatory change. Upcoming patches will introduce more
per-channel parameters so it's worth organizing them into a struct.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
---
 drivers/hwmon/tmp421.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 2c9ba5fe5f2a..1068fe59df0b 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -87,6 +87,10 @@ static const struct of_device_id __maybe_unused tmp421_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tmp421_of_match);
 
+struct tmp421_channel {
+	s16 temp;
+};
+
 struct tmp421_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
@@ -98,7 +102,7 @@ struct tmp421_data {
 	unsigned long last_updated;
 	unsigned long channels;
 	u8 config;
-	s16 temp[MAX_CHANNELS];
+	struct tmp421_channel channel[MAX_CHANNELS];
 };
 
 static int temp_from_s16(s16 reg)
@@ -134,9 +138,9 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)
 			TMP421_CONFIG_REG_1);
 
 		for (i = 0; i < data->channels; i++) {
-			data->temp[i] = i2c_smbus_read_byte_data(client,
+			data->channel[i].temp = i2c_smbus_read_byte_data(client,
 				TMP421_TEMP_MSB[i]) << 8;
-			data->temp[i] |= i2c_smbus_read_byte_data(client,
+			data->channel[i].temp |= i2c_smbus_read_byte_data(client,
 				TMP421_TEMP_LSB[i]);
 		}
 		data->last_updated = jiffies;
@@ -156,16 +160,16 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
 	switch (attr) {
 	case hwmon_temp_input:
 		if (tmp421->config & TMP421_CONFIG_RANGE)
-			*val = temp_from_u16(tmp421->temp[channel]);
+			*val = temp_from_u16(tmp421->channel[channel].temp);
 		else
-			*val = temp_from_s16(tmp421->temp[channel]);
+			*val = temp_from_s16(tmp421->channel[channel].temp);
 		return 0;
 	case hwmon_temp_fault:
 		/*
 		 * The OPEN bit signals a fault. This is bit 0 of the temperature
 		 * register (low byte).
 		 */
-		*val = tmp421->temp[channel] & 0x01;
+		*val = tmp421->channel[channel].temp & 0x01;
 		return 0;
 	default:
 		return -EOPNOTSUPP;
-- 
2.31.1


  parent reply	other threads:[~2021-09-07 13:43 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-07 13:41 [PATCH 0/8] Add per channel properies support in tmp421 Krzysztof Adamski
2021-09-07 13:42 ` [PATCH 1/8] dt-bindings: hwmon: add missing tmp421 binding Krzysztof Adamski
2021-09-20 22:21   ` Rob Herring
2021-09-07 13:42 ` [PATCH 2/8] hwmon: (tmp421) introduce MAX_CHANNELS define Krzysztof Adamski
2021-09-07 13:43 ` Krzysztof Adamski [this message]
2021-09-07 13:43 ` [PATCH 4/8] hwmon: (tmp421) add support for defining labels from DT Krzysztof Adamski
2021-09-07 15:46   ` Guenter Roeck
2021-09-07 17:49     ` Krzysztof Adamski
2021-09-07 17:55       ` Guenter Roeck
2021-09-07 18:08         ` Krzysztof Adamski
2021-09-07 18:28   ` kernel test robot
2021-09-09 17:29   ` kernel test robot
2021-09-09 17:29   ` [RFC PATCH] hwmon: tmp421_probe_child_from_dt() can be static kernel test robot
2021-09-07 13:43 ` [PATCH 5/8] hwmon: (tmp421) support disabling channels from DT Krzysztof Adamski
2021-09-07 15:33   ` Guenter Roeck
2021-09-07 13:45 ` [PATCH 6/8] hwmon: (tmp421) support specifying n-factor via DT Krzysztof Adamski
2021-09-07 15:42   ` Guenter Roeck
2021-09-07 13:46 ` [PATCH 7/8] hwmon: (tmp421) really disable channels Krzysztof Adamski
2021-09-07 15:37   ` Guenter Roeck
2021-09-07 19:52   ` kernel test robot
2021-09-09 20:40   ` kernel test robot
2021-09-09 20:40   ` [RFC PATCH] hwmon: tmp421_disable_channels() can be static kernel test robot
2021-09-07 13:46 ` [PATCH 8/8] dt-bindings: hwmon: allow specifying channels for tmp421 Krzysztof Adamski
2021-09-07 15:46   ` Guenter Roeck
2021-09-07 18:04     ` Krzysztof Adamski
2021-09-20 22:24   ` Rob Herring
2021-09-21 12:58     ` Guenter Roeck
2021-09-21 19:06       ` Rob Herring
2021-09-21 20:52         ` Guenter Roeck
2021-09-21 21:21           ` Oskar Senft
2021-09-21 22:03           ` Oskar Senft
2021-09-23 15:30           ` Rob Herring
2021-09-24  0:29             ` Guenter Roeck
2021-09-24  7:53               ` Krzysztof Adamski
2021-09-24 11:46                 ` Guenter Roeck
2021-09-24 15:37                   ` Oskar Senft
2021-09-25 13:26                     ` Guenter Roeck
2021-10-08 12:55                       ` Oskar Senft
2021-10-08 13:11                         ` Guenter Roeck
2021-09-22  7:22       ` Krzysztof Adamski
2021-09-22 12:39         ` Guenter Roeck
2021-09-22 18:32           ` Krzysztof Adamski
2021-09-23  0:38             ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=36491db30779131ec67ddd06f3c2bf457a37a16d.1631021349.git.krzysztof.adamski@nokia.com \
    --to=krzysztof.adamski@nokia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).