Re: [PATCH 4/7] dt-bindings: Input: introduce new clock vibrator bindings

[Rob Herring <robh+dt@kernel.org>]

On Wed, Dec 4, 2019 at 6:25 PM Brian Masney <masneyb@onstation.org> wrote:
>
> Add support for clock-based vibrator devices where the speed can be
> controlled by changing the duty cycle.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
>  .../bindings/input/clk-vibrator.yaml          | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/clk-vibrator.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/clk-vibrator.yaml b/Documentation/devicetree/bindings/input/clk-vibrator.yaml
> new file mode 100644
> index 000000000000..2103a5694fad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/clk-vibrator.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/input/clk-vibrator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Clock vibrator
> +
> +maintainers:
> +  - Brian Masney <masneyb@onstation.org>
> +
> +description: |
> +  Support for clock-based vibrator devices where the speed can be controlled
> +  by changing the duty cycle.
> +
> +properties:
> +  compatible:
> +    const: clk-vibrator
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description: output clock that controls the speed
> +    items:
> +      - const: core

No point in making up a name when there's only one clock, so drop.

> +
> +  clock-frequency: true

Given the frequency is variable, what does this mean in this case?

> +  enable-gpios:
> +    maxItems: 1
> +
> +  vcc-supply:
> +    description: Regulator that provides power
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - clock-frequency

Add:

additionalProperties: false

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    vibrator {
> +        compatible = "clk-vibrator";
> +
> +        vcc-supply = <&pm8941_l19>;
> +
> +        clocks = <&mmcc CAMSS_GP1_CLK>;
> +        clock-names = "core";
> +        clock-frequency = <24000>;
> +
> +        enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
> +
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&vibrator_pin>;
> +    };
> --
> 2.21.0
>