[PATCH v1] fs/ext4/inode-test: KUnit test for ext4 inode.

[PATCH v1] fs/ext4/inode-test: KUnit test for ext4 inode.

[Iurii Zaikin]

Note: this patch is intended to be applied against kselftest/test branch:
https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=test

KUnit tests for decoding extended 64 bit timestamps.

Signed-off-by: Iurii Zaikin <yzaikin@google.com>
---
 fs/ext4/Kconfig      |  12 +++
 fs/ext4/Makefile     |   1 +
 fs/ext4/inode-test.c | 217 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 230 insertions(+)
 create mode 100644 fs/ext4/inode-test.c

diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
index cbb5ca830e57..72c26abbce4c 100644
--- a/fs/ext4/Kconfig
+++ b/fs/ext4/Kconfig
@@ -106,3 +106,15 @@ config EXT4_DEBUG
   If you select Y here, then you will be able to turn on debugging
   with a command such as:
  echo 1 > /sys/module/ext4/parameters/mballoc_debug
+
+config EXT4_INODE_KUNIT_TEST
+ bool "KUnit test for ext4 inode"
+ depends on EXT4_FS
+ depends on KUNIT
+ help
+  This builds the ext4 inode sysctl unit test, which runs on boot.
+  Tests the encoding correctness of ext4 inode.
+  For more information on KUnit and unit tests in general please refer
+  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+  If unsure, say N.
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index b17ddc229ac5..1eeb8b449255 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -13,4 +13,5 @@ ext4-y := balloc.o bitmap.o block_validity.o dir.o
ext4_jbd2.o extents.o \

 ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
 ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
+ext4-$(CONFIG_EXT4_INODE_KUNIT_TEST) += inode-test.o
 ext4-$(CONFIG_FS_VERITY) += verity.o
diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
new file mode 100644
index 000000000000..0ecb8dd5e0c5
--- /dev/null
+++ b/fs/ext4/inode-test.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test of ext4 inode.
+ */
+
+#include <kunit/test.h>
+#include <linux/kernel.h>
+#include <linux/time64.h>
+
+#include "ext4.h"
+
+// binary: 00000000 00000000 00000000 00000000
+#define LOWER_MSB_0 0L
+// binary: 01111111 11111111 11111111 11111111
+#define UPPER_MSB_0 0x7fffffffL
+// binary: 10000000 00000000 00000000 00000000
+#define LOWER_MSB_1 (-0x80000000L)
+// binary: 11111111 11111111 11111111 11111111
+#define UPPER_MSB_1 (-1L)
+
+#define CASE_NAME_FORMAT "%s: msb:%x lower_bound:%x extra_bits: %x"
+
+struct timestamp_expectation {
+ const char *test_case_name;
+ struct timespec64 expected;
+ u32 extra_bits;
+ bool msb_set;
+ bool lower_bound;
+};
+
+static time64_t get_32bit_time(const struct timestamp_expectation * const test)
+{
+ if (test->msb_set) {
+ if (test->lower_bound)
+ return LOWER_MSB_1;
+
+ return UPPER_MSB_1;
+ }
+
+ if (test->lower_bound)
+ return LOWER_MSB_0;
+ return UPPER_MSB_0;
+}
+
+
+static void inode_test_xtimestamp_decoding(struct kunit *test)
+{
+ const struct timestamp_expectation test_data[] = {
+ {
+ .test_case_name = "1901-12-13",
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 0,
+ .expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "1969-12-31",
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 0,
+ .expected = {.tv_sec = -1LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "1970-01-01",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 0,
+ .expected = {0LL, 0L},
+ },
+
+ {
+ .test_case_name = "2038-01-19",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 0,
+ .expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2038-01-19",
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2106-02-07",
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2106-02-07",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0LL},
+ },
+
+ {
+ .test_case_name = "2174-02-25",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 1,
+ .expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2174-02-25",
+ .msb_set = true,
+ .lower_bound = true,
+ .extra_bits =  2,
+ .expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2242-03-16",
+ .msb_set = true,
+ .lower_bound = false,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2242-03-16",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = " 2310-04-04",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 2,
+ .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
+ },
+
+ /* TODO: enable when legacy encoding in ext4.h is disabled.
+ *{
+ * .test_case_name = "2310-04-04",
+ * .msb_set = true,
+ * .lower_bound = true,
+ * .extra_bits = 3,
+ * .expected = {.tv_sec = 0x280000000LL, .tv_nsec = 0L},
+ *},
+ *
+ *{
+ * .test_case_name = "2378-04-22",
+ * .msb_set = true,
+ * .lower_bound = false,
+ * .extra_bits = 3,
+ * .expected = {.tv_sec = 0x2ffffffffLL, .tv_nsec = 0L},
+ * },
+ */
+
+ {
+ .test_case_name = "2378-04-22",
+ .msb_set = false,
+ .lower_bound = true,
+ .extra_bits = 3,
+ .expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
+ },
+
+ {
+ .test_case_name = "2446-05-10",
+ .msb_set = false,
+ .lower_bound = false,
+ .extra_bits = 3,
+ .expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
+ }
+ };
+
+ struct timespec64 timestamp;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test_data); ++i) {
+ timestamp.tv_sec = get_32bit_time(&test_data[i]);
+ ext4_decode_extra_time(&timestamp,
+       cpu_to_le32(test_data[i].extra_bits));
+
+ KUNIT_EXPECT_EQ_MSG(test,
+    test_data[i].expected.tv_sec,
+    timestamp.tv_sec,
+    CASE_NAME_FORMAT,
+    test_data[i].test_case_name,
+    test_data[i].msb_set,
+    test_data[i].lower_bound,
+    test_data[i].extra_bits);
+ KUNIT_EXPECT_EQ_MSG(test,
+    test_data[i].expected.tv_nsec,
+    timestamp.tv_nsec,
+    CASE_NAME_FORMAT,
+    test_data[i].test_case_name,
+    test_data[i].msb_set,
+    test_data[i].lower_bound,
+    test_data[i].extra_bits);
+ }
+}
+
+static struct kunit_case ext4_inode_test_cases[] = {
+ KUNIT_CASE(inode_test_xtimestamp_decoding),
+ {}
+};
+
+static struct kunit_suite ext4_inode_test_suite = {
+ .name = "ext4_inode_test",
+ .test_cases = ext4_inode_test_cases,
+};
+
+kunit_test_suite(ext4_inode_test_suite);
--
2.23.0.700.g56cf767bdb-goog

Re: [PATCH v1] fs/ext4/inode-test: KUnit test for ext4 inode.

[Shuah Khan]

Hi Iurii,

Thanks for the patch.

On 10/8/19 8:42 PM, Iurii Zaikin wrote:
> Note: this patch is intended to be applied against kselftest/test branch:
> https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=test
> 


This doesn't belong here. You can add it to commit header

[PATCH linux-kselftest/test] also you don't need v1 in there.

> KUnit tests for decoding extended 64 bit timestamps.

Please give more details on what these tests do. More information
on range of timestamps would be helpful. I see you have 2038 test
and it would be great to call out the ranges and conditions it is
resting.

> 
> Signed-off-by: Iurii Zaikin <yzaikin@google.com>
> ---
>   fs/ext4/Kconfig      |  12 +++
>   fs/ext4/Makefile     |   1 +
>   fs/ext4/inode-test.c | 217 +++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 230 insertions(+)
>   create mode 100644 fs/ext4/inode-test.c
> 
> diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
> index cbb5ca830e57..72c26abbce4c 100644
> --- a/fs/ext4/Kconfig
> +++ b/fs/ext4/Kconfig
> @@ -106,3 +106,15 @@ config EXT4_DEBUG
>     If you select Y here, then you will be able to turn on debugging
>     with a command such as:
>    echo 1 > /sys/module/ext4/parameters/mballoc_debug
> +
> +config EXT4_INODE_KUNIT_TEST
> + bool "KUnit test for ext4 inode"
> + depends on EXT4_FS
> + depends on KUNIT
> + help
> +  This builds the ext4 inode sysctl unit test, which runs on boot.
> +  Tests the encoding correctness of ext4 inode.
> +  For more information on KUnit and unit tests in general please refer
> +  to the KUnit documentation in Documentation/dev-tools/kunit/.
> +
> +  If unsure, say N.
> diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
> index b17ddc229ac5..1eeb8b449255 100644
> --- a/fs/ext4/Makefile
> +++ b/fs/ext4/Makefile
> @@ -13,4 +13,5 @@ ext4-y := balloc.o bitmap.o block_validity.o dir.o
> ext4_jbd2.o extents.o \
> 
>   ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
>   ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
> +ext4-$(CONFIG_EXT4_INODE_KUNIT_TEST) += inode-test.o
>   ext4-$(CONFIG_FS_VERITY) += verity.o
> diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
> new file mode 100644
> index 000000000000..0ecb8dd5e0c5
> --- /dev/null
> +++ b/fs/ext4/inode-test.c
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0

Follow the commenting style recommended in the coding-style doc.
/* ---- */

> +/*
> + * KUnit test of ext4 inode.
> + */
> +
> +#include <kunit/test.h>
> +#include <linux/kernel.h>
> +#include <linux/time64.h>
> +
> +#include "ext4.h"
> +
> +// binary: 00000000 00000000 00000000 00000000
> +#define LOWER_MSB_0 0L
> +// binary: 01111111 11111111 11111111 11111111
> +#define UPPER_MSB_0 0x7fffffffL
> +// binary: 10000000 00000000 00000000 00000000
> +#define LOWER_MSB_1 (-0x80000000L)
> +// binary: 11111111 11111111 11111111 11111111
> +#define UPPER_MSB_1 (-1L)
> +
> +#define CASE_NAME_FORMAT "%s: msb:%x lower_bound:%x extra_bits: %x"
> +
> +struct timestamp_expectation {
> + const char *test_case_name;
> + struct timespec64 expected;
> + u32 extra_bits;
> + bool msb_set;
> + bool lower_bound;
> +};
> +
> +static time64_t get_32bit_time(const struct timestamp_expectation * const test)
> +{
> + if (test->msb_set) {
> + if (test->lower_bound)
> + return LOWER_MSB_1;
> +
> + return UPPER_MSB_1;
> + }

Can you add information on what you are trying to test.
Please do the same for all tests.

> +
> + if (test->lower_bound)
> + return LOWER_MSB_0;
> + return UPPER_MSB_0;
> +}
> +
> +
> +static void inode_test_xtimestamp_decoding(struct kunit *test)
> +{
> + const struct timestamp_expectation test_data[] = {
> + {
> + .test_case_name = "1901-12-13",
> + .msb_set = true,
> + .lower_bound = true,
> + .extra_bits = 0,
> + .expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
> + },
> +

I see that you use the same tv_nsec for all tests. Is there
a reason for that? Would it be helpful to vary it?

> + {
> + .test_case_name = "1969-12-31",
> + .msb_set = true,
> + .lower_bound = false,
> + .extra_bits = 0,
> + .expected = {.tv_sec = -1LL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "1970-01-01",
> + .msb_set = false,
> + .lower_bound = true,
> + .extra_bits = 0,
> + .expected = {0LL, 0L},
> + },
> +
> + {
> + .test_case_name = "2038-01-19",
> + .msb_set = false,
> + .lower_bound = false,
> + .extra_bits = 0,
> + .expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2038-01-19",
> + .msb_set = true,
> + .lower_bound = true,
> + .extra_bits = 1,
> + .expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2106-02-07",
> + .msb_set = true,
> + .lower_bound = false,
> + .extra_bits = 1,
> + .expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2106-02-07",
> + .msb_set = false,
> + .lower_bound = true,
> + .extra_bits = 1,
> + .expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0LL},
> + },
> +
> + {
> + .test_case_name = "2174-02-25",
> + .msb_set = false,
> + .lower_bound = false,
> + .extra_bits = 1,
> + .expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2174-02-25",
> + .msb_set = true,
> + .lower_bound = true,
> + .extra_bits =  2,
> + .expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2242-03-16",
> + .msb_set = true,
> + .lower_bound = false,
> + .extra_bits = 2,
> + .expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2242-03-16",
> + .msb_set = false,
> + .lower_bound = true,
> + .extra_bits = 2,
> + .expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = " 2310-04-04",
> + .msb_set = false,
> + .lower_bound = false,
> + .extra_bits = 2,
> + .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
> + },
> +

Get rid of this. Add it when you can add it later. I don't
like to see these TODOs with blocks of code commented out.

> + /* TODO: enable when legacy encoding in ext4.h is disabled.
> + *{
> + * .test_case_name = "2310-04-04",
> + * .msb_set = true,
> + * .lower_bound = true,
> + * .extra_bits = 3,
> + * .expected = {.tv_sec = 0x280000000LL, .tv_nsec = 0L},
> + *},
> + *
> + *{
> + * .test_case_name = "2378-04-22",
> + * .msb_set = true,
> + * .lower_bound = false,
> + * .extra_bits = 3,
> + * .expected = {.tv_sec = 0x2ffffffffLL, .tv_nsec = 0L},
> + * },
> + */
> +
> + {
> + .test_case_name = "2378-04-22",
> + .msb_set = false,
> + .lower_bound = true,
> + .extra_bits = 3,
> + .expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
> + },
> +
> + {
> + .test_case_name = "2446-05-10",
> + .msb_set = false,
> + .lower_bound = false,
> + .extra_bits = 3,
> + .expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
> + }
> + };
> +
> + struct timespec64 timestamp;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(test_data); ++i) {
> + timestamp.tv_sec = get_32bit_time(&test_data[i]);
> + ext4_decode_extra_time(&timestamp,
> +       cpu_to_le32(test_data[i].extra_bits));
> +
> + KUNIT_EXPECT_EQ_MSG(test,
> +    test_data[i].expected.tv_sec,
> +    timestamp.tv_sec,
> +    CASE_NAME_FORMAT,
> +    test_data[i].test_case_name,
> +    test_data[i].msb_set,
> +    test_data[i].lower_bound,
> +    test_data[i].extra_bits);
> + KUNIT_EXPECT_EQ_MSG(test,
> +    test_data[i].expected.tv_nsec,
> +    timestamp.tv_nsec,
> +    CASE_NAME_FORMAT,
> +    test_data[i].test_case_name,
> +    test_data[i].msb_set,
> +    test_data[i].lower_bound,
> +    test_data[i].extra_bits);
> + }
> +}
> +
> +static struct kunit_case ext4_inode_test_cases[] = {
> + KUNIT_CASE(inode_test_xtimestamp_decoding),
> + {}
> +};
> +
> +static struct kunit_suite ext4_inode_test_suite = {
> + .name = "ext4_inode_test",
> + .test_cases = ext4_inode_test_cases,
> +};
> +
> +kunit_test_suite(ext4_inode_test_suite);
> --
> 2.23.0.700.g56cf767bdb-goog
> 

thanks,
-- Shuah

Re: [PATCH v1] fs/ext4/inode-test: KUnit test for ext4 inode.

[Iurii Zaikin]

>
> Hi Iurii,
>
> Thanks for the patch.
>
> On 10/8/19 8:42 PM, Iurii Zaikin wrote:
> > Note: this patch is intended to be applied against kselftest/test branch:
> > https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=test
> >
>
>
> This doesn't belong here. You can add it to commit header
>
> [PATCH linux-kselftest/test] also you don't need v1 in there.
>
> > KUnit tests for decoding extended 64 bit timestamps.
>
> Please give more details on what these tests do. More information
> on range of timestamps would be helpful. I see you have 2038 test
> and it would be great to call out the ranges and conditions it is
> resting.
Added the link to the ext4 docs from which the tests were derived.
>
> >
> > Signed-off-by: Iurii Zaikin <yzaikin@google.com>
> > ---
> >   fs/ext4/Kconfig      |  12 +++
> >   fs/ext4/Makefile     |   1 +
> >   fs/ext4/inode-test.c | 217 +++++++++++++++++++++++++++++++++++++++++++
> >   3 files changed, 230 insertions(+)
> >   create mode 100644 fs/ext4/inode-test.c
> >
> > diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
> > index cbb5ca830e57..72c26abbce4c 100644
> > --- a/fs/ext4/Kconfig
> > +++ b/fs/ext4/Kconfig
> > @@ -106,3 +106,15 @@ config EXT4_DEBUG
> >     If you select Y here, then you will be able to turn on debugging
> >     with a command such as:
> >    echo 1 > /sys/module/ext4/parameters/mballoc_debug
> > +
> > +config EXT4_INODE_KUNIT_TEST
> > + bool "KUnit test for ext4 inode"
> > + depends on EXT4_FS
> > + depends on KUNIT
> > + help
> > +  This builds the ext4 inode sysctl unit test, which runs on boot.
> > +  Tests the encoding correctness of ext4 inode.
> > +  For more information on KUnit and unit tests in general please refer
> > +  to the KUnit documentation in Documentation/dev-tools/kunit/.
> > +
> > +  If unsure, say N.
> > diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
> > index b17ddc229ac5..1eeb8b449255 100644
> > --- a/fs/ext4/Makefile
> > +++ b/fs/ext4/Makefile
> > @@ -13,4 +13,5 @@ ext4-y := balloc.o bitmap.o block_validity.o dir.o
> > ext4_jbd2.o extents.o \
> >
> >   ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
> >   ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
> > +ext4-$(CONFIG_EXT4_INODE_KUNIT_TEST) += inode-test.o
> >   ext4-$(CONFIG_FS_VERITY) += verity.o
> > diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
> > new file mode 100644
> > index 000000000000..0ecb8dd5e0c5
> > --- /dev/null
> > +++ b/fs/ext4/inode-test.c
> > @@ -0,0 +1,217 @@
> > +// SPDX-License-Identifier: GPL-2.0
>
> Follow the commenting style recommended in the coding-style doc.
> /* ---- */
Done
>
> > +/*
> > + * KUnit test of ext4 inode.
> > + */
> > +
> > +#include <kunit/test.h>
> > +#include <linux/kernel.h>
> > +#include <linux/time64.h>
> > +
> > +#include "ext4.h"
> > +
> > +// binary: 00000000 00000000 00000000 00000000
> > +#define LOWER_MSB_0 0L
> > +// binary: 01111111 11111111 11111111 11111111
> > +#define UPPER_MSB_0 0x7fffffffL
> > +// binary: 10000000 00000000 00000000 00000000
> > +#define LOWER_MSB_1 (-0x80000000L)
> > +// binary: 11111111 11111111 11111111 11111111
> > +#define UPPER_MSB_1 (-1L)
> > +
> > +#define CASE_NAME_FORMAT "%s: msb:%x lower_bound:%x extra_bits: %x"
> > +
> > +struct timestamp_expectation {
> > + const char *test_case_name;
> > + struct timespec64 expected;
> > + u32 extra_bits;
> > + bool msb_set;
> > + bool lower_bound;
> > +};
> > +
> > +static time64_t get_32bit_time(const struct timestamp_expectation * const test)
> > +{
> > + if (test->msb_set) {
> > + if (test->lower_bound)
> > + return LOWER_MSB_1;
> > +
> > + return UPPER_MSB_1;
> > + }
>
> Can you add information on what you are trying to test.
> Please do the same for all tests.
>
> > +
> > + if (test->lower_bound)
> > + return LOWER_MSB_0;
> > + return UPPER_MSB_0;
> > +}
> > +
> > +
> > +static void inode_test_xtimestamp_decoding(struct kunit *test)
> > +{
> > + const struct timestamp_expectation test_data[] = {
> > + {
> > + .test_case_name = "1901-12-13",
> > + .msb_set = true,
> > + .lower_bound = true,
> > + .extra_bits = 0,
> > + .expected = {.tv_sec = -0x80000000LL, .tv_nsec = 0L},
> > + },
> > +
>
> I see that you use the same tv_nsec for all tests. Is there
> a reason for that? Would it be helpful to vary it?
Done.
>
> > + {
> > + .test_case_name = "1969-12-31",
> > + .msb_set = true,
> > + .lower_bound = false,
> > + .extra_bits = 0,
> > + .expected = {.tv_sec = -1LL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "1970-01-01",
> > + .msb_set = false,
> > + .lower_bound = true,
> > + .extra_bits = 0,
> > + .expected = {0LL, 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2038-01-19",
> > + .msb_set = false,
> > + .lower_bound = false,
> > + .extra_bits = 0,
> > + .expected = {.tv_sec = 0x7fffffffLL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2038-01-19",
> > + .msb_set = true,
> > + .lower_bound = true,
> > + .extra_bits = 1,
> > + .expected = {.tv_sec = 0x80000000LL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2106-02-07",
> > + .msb_set = true,
> > + .lower_bound = false,
> > + .extra_bits = 1,
> > + .expected = {.tv_sec = 0xffffffffLL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2106-02-07",
> > + .msb_set = false,
> > + .lower_bound = true,
> > + .extra_bits = 1,
> > + .expected = {.tv_sec = 0x100000000LL, .tv_nsec = 0LL},
> > + },
> > +
> > + {
> > + .test_case_name = "2174-02-25",
> > + .msb_set = false,
> > + .lower_bound = false,
> > + .extra_bits = 1,
> > + .expected = {.tv_sec = 0x17fffffffLL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2174-02-25",
> > + .msb_set = true,
> > + .lower_bound = true,
> > + .extra_bits =  2,
> > + .expected = {.tv_sec = 0x180000000LL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2242-03-16",
> > + .msb_set = true,
> > + .lower_bound = false,
> > + .extra_bits = 2,
> > + .expected = {.tv_sec = 0x1ffffffffLL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2242-03-16",
> > + .msb_set = false,
> > + .lower_bound = true,
> > + .extra_bits = 2,
> > + .expected = {.tv_sec = 0x200000000LL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = " 2310-04-04",
> > + .msb_set = false,
> > + .lower_bound = false,
> > + .extra_bits = 2,
> > + .expected = {.tv_sec = 0x27fffffffLL, .tv_nsec = 0L},
> > + },
> > +
>
> Get rid of this. Add it when you can add it later. I don't
> like to see these TODOs with blocks of code commented out.
Done
>
> > + /* TODO: enable when legacy encoding in ext4.h is disabled.
> > + *{
> > + * .test_case_name = "2310-04-04",
> > + * .msb_set = true,
> > + * .lower_bound = true,
> > + * .extra_bits = 3,
> > + * .expected = {.tv_sec = 0x280000000LL, .tv_nsec = 0L},
> > + *},
> > + *
> > + *{
> > + * .test_case_name = "2378-04-22",
> > + * .msb_set = true,
> > + * .lower_bound = false,
> > + * .extra_bits = 3,
> > + * .expected = {.tv_sec = 0x2ffffffffLL, .tv_nsec = 0L},
> > + * },
> > + */
> > +
> > + {
> > + .test_case_name = "2378-04-22",
> > + .msb_set = false,
> > + .lower_bound = true,
> > + .extra_bits = 3,
> > + .expected = {.tv_sec = 0x300000000LL, .tv_nsec = 0L},
> > + },
> > +
> > + {
> > + .test_case_name = "2446-05-10",
> > + .msb_set = false,
> > + .lower_bound = false,
> > + .extra_bits = 3,
> > + .expected = {.tv_sec = 0x37fffffffLL, .tv_nsec = 0L},
> > + }
> > + };
> > +
> > + struct timespec64 timestamp;
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(test_data); ++i) {
> > + timestamp.tv_sec = get_32bit_time(&test_data[i]);
> > + ext4_decode_extra_time(&timestamp,
> > +       cpu_to_le32(test_data[i].extra_bits));
> > +
> > + KUNIT_EXPECT_EQ_MSG(test,
> > +    test_data[i].expected.tv_sec,
> > +    timestamp.tv_sec,
> > +    CASE_NAME_FORMAT,
> > +    test_data[i].test_case_name,
> > +    test_data[i].msb_set,
> > +    test_data[i].lower_bound,
> > +    test_data[i].extra_bits);
> > + KUNIT_EXPECT_EQ_MSG(test,
> > +    test_data[i].expected.tv_nsec,
> > +    timestamp.tv_nsec,
> > +    CASE_NAME_FORMAT,
> > +    test_data[i].test_case_name,
> > +    test_data[i].msb_set,
> > +    test_data[i].lower_bound,
> > +    test_data[i].extra_bits);
> > + }
> > +}
> > +
> > +static struct kunit_case ext4_inode_test_cases[] = {
> > + KUNIT_CASE(inode_test_xtimestamp_decoding),
> > + {}
> > +};
> > +
> > +static struct kunit_suite ext4_inode_test_suite = {
> > + .name = "ext4_inode_test",
> > + .test_cases = ext4_inode_test_cases,
> > +};
> > +
> > +kunit_test_suite(ext4_inode_test_suite);
> > --
> > 2.23.0.700.g56cf767bdb-goog
> >
>
> thanks,
> -- Shuah

> Whitespace in this patch (ok, I'm assuming that there was some whitespace)
> is severely damaged.  I.e., gone.
Sorry, used different email client this time.
> I'd suggest using "ext4: add kunit test for decoding extended
> timestamps" as the one-line summary, and we probably don't need
> anything else.
Done
> Should we perhaps just call the cofnig "EXT4_KUNIT_TESTS"?
Done

Re: [PATCH v1] fs/ext4/inode-test: KUnit test for ext4 inode.

[Randy Dunlap]

On 10/8/19 7:42 PM, Iurii Zaikin wrote:
> Note: this patch is intended to be applied against kselftest/test branch:
> https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=test
> 
> KUnit tests for decoding extended 64 bit timestamps.
> 
> Signed-off-by: Iurii Zaikin <yzaikin@google.com>

Whitespace in this patch (ok, I'm assuming that there was some whitespace)
is severely damaged.  I.e., gone.

> ---
>  fs/ext4/Kconfig      |  12 +++
>  fs/ext4/Makefile     |   1 +
>  fs/ext4/inode-test.c | 217 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 230 insertions(+)
>  create mode 100644 fs/ext4/inode-test.c
> 
> diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
> index cbb5ca830e57..72c26abbce4c 100644
> --- a/fs/ext4/Kconfig
> +++ b/fs/ext4/Kconfig
> @@ -106,3 +106,15 @@ config EXT4_DEBUG
>    If you select Y here, then you will be able to turn on debugging
>    with a command such as:
>   echo 1 > /sys/module/ext4/parameters/mballoc_debug
> +
> +config EXT4_INODE_KUNIT_TEST
> + bool "KUnit test for ext4 inode"
> + depends on EXT4_FS
> + depends on KUNIT
> + help

The 4 lines above should begin with a tab, not a space.

> +  This builds the ext4 inode sysctl unit test, which runs on boot.
> +  Tests the encoding correctness of ext4 inode.
> +  For more information on KUnit and unit tests in general please refer
> +  to the KUnit documentation in Documentation/dev-tools/kunit/.
> +
> +  If unsure, say N.

The C source file is also missing lots of tabs (indentation).


> new file mode 100644
> index 000000000000..0ecb8dd5e0c5
> --- /dev/null
> +++ b/fs/ext4/inode-test.c
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * KUnit test of ext4 inode.
> + */
> +
> +#include <kunit/test.h>
> +#include <linux/kernel.h>
> +#include <linux/time64.h>
> +
> +#include "ext4.h"
> +
> +// binary: 00000000 00000000 00000000 00000000
> +#define LOWER_MSB_0 0L
> +// binary: 01111111 11111111 11111111 11111111
> +#define UPPER_MSB_0 0x7fffffffL
> +// binary: 10000000 00000000 00000000 00000000
> +#define LOWER_MSB_1 (-0x80000000L)
> +// binary: 11111111 11111111 11111111 11111111
> +#define UPPER_MSB_1 (-1L)
> +
> +#define CASE_NAME_FORMAT "%s: msb:%x lower_bound:%x extra_bits: %x"
> +
> +struct timestamp_expectation {
> + const char *test_case_name;
> + struct timespec64 expected;
> + u32 extra_bits;
> + bool msb_set;
> + bool lower_bound;
> +};
> +
> +static time64_t get_32bit_time(const struct timestamp_expectation * const test)
> +{
> + if (test->msb_set) {
> + if (test->lower_bound)
> + return LOWER_MSB_1;
> +
> + return UPPER_MSB_1;
> + }
> +
> + if (test->lower_bound)
> + return LOWER_MSB_0;
> + return UPPER_MSB_0;
> +}


-- 
~Randy

Re: [PATCH v1] fs/ext4/inode-test: KUnit test for ext4 inode.

[Theodore Y. Ts'o]

On Tue, Oct 08, 2019 at 07:42:05PM -0700, Iurii Zaikin wrote:
> Note: this patch is intended to be applied against kselftest/test branch:
> https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=test
> 
> KUnit tests for decoding extended 64 bit timestamps.

I'd suggest using "ext4: add kunit test for decoding extended
timestamps" as the one-line summary, and we probably don't need
anything else.

> Signed-off-by: Iurii Zaikin <yzaikin@google.com>
> ---
>  fs/ext4/Kconfig      |  12 +++
>  fs/ext4/Makefile     |   1 +
>  fs/ext4/inode-test.c | 217 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 230 insertions(+)
>  create mode 100644 fs/ext4/inode-test.c
> 
> diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
> index cbb5ca830e57..72c26abbce4c 100644
> --- a/fs/ext4/Kconfig
> +++ b/fs/ext4/Kconfig
> @@ -106,3 +106,15 @@ config EXT4_DEBUG
>    If you select Y here, then you will be able to turn on debugging
>    with a command such as:
>   echo 1 > /sys/module/ext4/parameters/mballoc_debug
> +
> +config EXT4_INODE_KUNIT_TEST
> + bool "KUnit test for ext4 inode"
> + depends on EXT4_FS
> + depends on KUNIT
> + help
> +  This builds the ext4 inode sysctl unit test, which runs on boot.
> +  Tests the encoding correctness of ext4 inode.
> +  For more information on KUnit and unit tests in general please refer
> +  to the KUnit documentation in Documentation/dev-tools/kunit/.

Should we perhaps just call the cofnig "EXT4_KUNIT_TESTS"?  Right now
the only thing we test is timestamp encoding/decoding, but later on
we'll be adding other other ext4 uninit tests --- and more ext4
encoding tests is not neceesarily where I would start, since the rest
are actually quite straightforward.

(The next set of uninit tests I'm interested in is the ext4's
extent_status tree, since that requires minimal amounts of test
mocks.)

So we might as well make the config name more general to begin with.

      	       	    	     	    - Ted