From: Bart Van Assche <bvanassche@acm.org>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-fsdevel@vger.kernel.org,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Christoph Hellwig <hch@lst.de>,
Niklas Cassel <Niklas.Cassel@wdc.com>,
Avri Altman <Avri.Altman@wdc.com>, Bean Huo <huobean@gmail.com>,
Daejun Park <daejun7.park@samsung.com>,
Bart Van Assche <bvanassche@acm.org>,
Douglas Gilbert <dgilbert@interlog.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v2 12/15] scsi_debug: Rework subpage code error handling
Date: Thu, 5 Oct 2023 12:40:58 -0700 [thread overview]
Message-ID: <20231005194129.1882245-13-bvanassche@acm.org> (raw)
In-Reply-To: <20231005194129.1882245-1-bvanassche@acm.org>
Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/scsi_debug.c | 70 ++++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 6b87d267c9c5..a96eb0d10346 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2386,22 +2386,22 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
ap = arr + offset;
}
- if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
- /* TODO: Control Extension page */
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
- }
-
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_err_recov_pg(ap, pcontrol, target);
offset += len;
break;
case 0x2: /* Disconnect-Reconnect page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_disconnect_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3: /* Format device page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
if (is_disk) {
len = resp_format_pg(ap, pcontrol, target);
offset += len;
@@ -2410,6 +2410,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0x8: /* Caching page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
if (is_disk || is_zbc) {
len = resp_caching_pg(ap, pcontrol, target);
offset += len;
@@ -2418,14 +2420,14 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0xa: /* Control Mode page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_ctrl_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
- if ((subpcode > 0x2) && (subpcode < 0xff)) {
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
- }
+ if (subpcode > 0x2 && subpcode < 0xff)
+ goto bad_subpcode;
len = 0;
if ((0x0 == subpcode) || (0xff == subpcode))
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
@@ -2437,35 +2439,31 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
offset += len;
break;
case 0x1c: /* Informational Exceptions Mode page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_iec_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3f: /* Read all Mode pages */
- if ((0 == subpcode) || (0xff == subpcode)) {
- len = resp_err_recov_pg(ap, pcontrol, target);
- len += resp_disconnect_pg(ap + len, pcontrol, target);
- if (is_disk) {
- len += resp_format_pg(ap + len, pcontrol,
- target);
- len += resp_caching_pg(ap + len, pcontrol,
- target);
- } else if (is_zbc) {
- len += resp_caching_pg(ap + len, pcontrol,
- target);
- }
- len += resp_ctrl_m_pg(ap + len, pcontrol, target);
- len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
- if (0xff == subpcode) {
- len += resp_sas_pcd_m_spg(ap + len, pcontrol,
- target, target_dev_id);
- len += resp_sas_sha_m_spg(ap + len, pcontrol);
- }
- len += resp_iec_m_pg(ap + len, pcontrol, target);
- offset += len;
- } else {
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
+ len = resp_err_recov_pg(ap, pcontrol, target);
+ len += resp_disconnect_pg(ap + len, pcontrol, target);
+ if (is_disk) {
+ len += resp_format_pg(ap + len, pcontrol, target);
+ len += resp_caching_pg(ap + len, pcontrol, target);
+ } else if (is_zbc) {
+ len += resp_caching_pg(ap + len, pcontrol, target);
+ }
+ len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+ len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
+ if (0xff == subpcode) {
+ len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
+ target_dev_id);
+ len += resp_sas_sha_m_spg(ap + len, pcontrol);
}
+ len += resp_iec_m_pg(ap + len, pcontrol, target);
+ offset += len;
break;
default:
goto bad_pcode;
@@ -2479,6 +2477,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
bad_pcode:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
+
+bad_subpcode:
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
+ return check_condition_result;
}
#define SDEBUG_MAX_MSELECT_SZ 512
next prev parent reply other threads:[~2023-10-05 19:42 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-05 19:40 [PATCH v2 00/15] Pass data temperature information to UFS devices Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 01/15] block: Make bio_set_ioprio() modify fewer bio->bi_ioprio bits Bart Van Assche
2023-10-06 6:28 ` Kanchan Joshi
2023-10-06 18:20 ` Bart Van Assche
2023-10-10 5:22 ` Kanchan Joshi
2023-10-11 16:52 ` Bart Van Assche
2023-10-12 8:49 ` Kanchan Joshi
2023-10-12 14:03 ` Niklas Cassel
2023-10-12 17:42 ` Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 02/15] blk-ioprio: Modify " Bart Van Assche
2023-10-06 6:36 ` Kanchan Joshi
2023-10-06 18:25 ` Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 03/15] block: Support data lifetime in the I/O priority bitfield Bart Van Assche
2023-10-06 6:42 ` Kanchan Joshi
2023-10-06 8:19 ` Damien Le Moal
2023-10-06 9:53 ` Niklas Cassel
2023-10-06 18:07 ` Bart Van Assche
2023-10-11 20:51 ` Bart Van Assche
2023-10-12 1:02 ` Damien Le Moal
2023-10-12 18:00 ` Bart Van Assche
2023-10-13 1:08 ` Damien Le Moal
2023-10-13 9:33 ` Niklas Cassel
2023-10-13 21:20 ` Bart Van Assche
2023-10-16 9:20 ` Niklas Cassel
2023-10-16 16:36 ` Bart Van Assche
2023-10-13 20:18 ` Bart Van Assche
2023-10-15 22:22 ` Damien Le Moal
2023-10-16 16:31 ` Bart Van Assche
2023-10-16 6:17 ` Christoph Hellwig
2023-10-16 16:32 ` Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 04/15] fs: Restore write hint support Bart Van Assche
2023-10-10 5:42 ` Kanchan Joshi
2023-10-11 16:56 ` Bart Van Assche
2023-10-16 6:20 ` Christoph Hellwig
2023-10-05 19:40 ` [PATCH v2 05/15] fs/f2fs: Restore the whint_mode mount option Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 06/15] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 07/15] scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 08/15] sd: Translate data lifetime information Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 09/15] scsi_debug: Reduce code duplication Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 10/15] scsi_debug: Support the block limits extension VPD page Bart Van Assche
2023-10-05 19:40 ` [PATCH v2 11/15] scsi_debug: Rework page code error handling Bart Van Assche
2023-10-05 19:40 ` Bart Van Assche [this message]
2023-10-05 19:40 ` [PATCH v2 13/15] scsi_debug: Implement the IO Advice Hints Grouping mode page Bart Van Assche
2023-10-05 19:41 ` [PATCH v2 14/15] scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2023-10-05 19:41 ` [PATCH v2 15/15] scsi_debug: Maintain write statistics per group number Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231005194129.1882245-13-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=Avri.Altman@wdc.com \
--cc=Niklas.Cassel@wdc.com \
--cc=axboe@kernel.dk \
--cc=daejun7.park@samsung.com \
--cc=dgilbert@interlog.com \
--cc=hch@lst.de \
--cc=huobean@gmail.com \
--cc=jejb@linux.ibm.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).