[RFCv4 0/9] ext2: DIO to use iomap

[RFCv4 0/9] ext2: DIO to use iomap

[Ritesh Harjani (IBM)]

Please find the series which rewrites ext2 direct-io path to use modern
iomap interface.

RFCv3 -> RFCV4:
===============
1. Renamed __generic_file_fsync_nolock() from libfs to generic_buffer_fsync() in
   fs/buffer.c
   (Review comment from Christoph)
2. Fixed s/EVENTD/EVENTFD/ in TRACE_IOCB_STRINGS
3. Fixed few data types for parameters in ext2 trace patch (size_t && ssize_t)
4. Killed this patch "Minor refactor of iomap_dio_rw"
5. Changed iomap tracepoint patch and fixed the data types (size_t && ssize_t)
   (addressed review comments from Christoph)

RFCv2 -> RFCv3:
===============
1. Addressed minor review comments related to extern, parameter naming in
   function declaration, removing not required braces and shorting overly long
   lines.
2. Added Reviewed-by from various reviewers.
3. Fixed a warning & couple of compilation errors in Patch-7 (ext2 trace points)
   related to CFLAGS_trace & second related to unable to find function
   definition for iov_iter_count(). (requires uio.h file)
   CFLAGS_trace is required in Makefile so that it can find trace.h file from
   tracepoint infrastructure.
4. Changed naming of IOCB_STRINGS TO TRACE_IOCB_STRINGS.
5. Shortened naming of tracepoint events for ext2 dio.
6. Added iomap DIO tracepoint events.
7. Disha tested this series internally against Power with "auto" group for 4k
   and 64k blocksize configuration. Added her "Tested-by" tag in all DIO
   related patches. No new failures were reported.

Thanks everyone for the review and test. The series is looking good to me now.
It has now been tested on x86 and Power with different configurations.
Please let me know if anything else is required on this.

v2: https://lore.kernel.org/all/ZDTybcM4kjYLSrGI@infradead.org/

Ritesh Harjani (IBM) (9):
  ext2/dax: Fix ext2_setsize when len is page aligned
  fs/buffer.c: Add generic_buffer_fsync implementation
  ext4: Use generic_buffer_fsync() implementation
  ext2: Use generic_buffer_fsync() implementation
  ext2: Move direct-io to use iomap
  fs.h: Add TRACE_IOCB_STRINGS for use in trace points
  ext2: Add direct-io trace points
  iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
  iomap: Add couple of DIO tracepoints

 fs/buffer.c                 |  43 ++++++++++++
 fs/ext2/Makefile            |   5 +-
 fs/ext2/ext2.h              |   1 +
 fs/ext2/file.c              | 128 +++++++++++++++++++++++++++++++++++-
 fs/ext2/inode.c             |  58 +++++++++-------
 fs/ext2/trace.c             |   6 ++
 fs/ext2/trace.h             |  94 ++++++++++++++++++++++++++
 fs/ext4/fsync.c             |  32 ++++-----
 fs/iomap/direct-io.c        |   7 +-
 fs/iomap/trace.c            |   1 +
 fs/iomap/trace.h            |  35 ++++++++++
 include/linux/buffer_head.h |   2 +
 include/linux/fs.h          |  14 ++++
 include/linux/iomap.h       |   6 --
 14 files changed, 384 insertions(+), 48 deletions(-)
 create mode 100644 fs/ext2/trace.c
 create mode 100644 fs/ext2/trace.h

--
2.39.2

[RFCv4 1/9] ext2/dax: Fix ext2_setsize when len is page aligned

[Ritesh Harjani (IBM)]

PAGE_ALIGN(x) macro gives the next highest value which is multiple of
pagesize. But if x is already page aligned then it simply returns x.
So, if x passed is 0 in dax_zero_range() function, that means the
length gets passed as 0 to ->iomap_begin().

In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on
here in ext2_get_blocks().
	BUG_ON(maxblocks == 0);

Instead we should be calling dax_truncate_page() here which takes
care of it. i.e. it only calls dax_zero_range if the offset is not
page/block aligned.

This can be easily triggered with following on fsdax mounted pmem
device.

dd if=/dev/zero of=file count=1 bs=512
truncate -s 0 file

[79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff)
[93.793207] ------------[ cut here ]------------
[93.795102] kernel BUG at fs/ext2/inode.c:637!
[93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139
[93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610
<...>
[93.835298] Call Trace:
[93.836253]  <TASK>
[93.837103]  ? lock_acquire+0xf8/0x110
[93.838479]  ? d_lookup+0x69/0xd0
[93.839779]  ext2_iomap_begin+0xa7/0x1c0
[93.841154]  iomap_iter+0xc7/0x150
[93.842425]  dax_zero_range+0x6e/0xa0
[93.843813]  ext2_setsize+0x176/0x1b0
[93.845164]  ext2_setattr+0x151/0x200
[93.846467]  notify_change+0x341/0x4e0
[93.847805]  ? lock_acquire+0xf8/0x110
[93.849143]  ? do_truncate+0x74/0xe0
[93.850452]  ? do_truncate+0x84/0xe0
[93.851739]  do_truncate+0x84/0xe0
[93.852974]  do_sys_ftruncate+0x2b4/0x2f0
[93.854404]  do_syscall_64+0x3f/0x90
[93.855789]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/ext2/inode.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 26f135e7ffce..dc76147e7b07 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1259,9 +1259,8 @@ static int ext2_setsize(struct inode *inode, loff_t newsize)
 	inode_dio_wait(inode);
 
 	if (IS_DAX(inode))
-		error = dax_zero_range(inode, newsize,
-				       PAGE_ALIGN(newsize) - newsize, NULL,
-				       &ext2_iomap_ops);
+		error = dax_truncate_page(inode, newsize, NULL,
+					  &ext2_iomap_ops);
 	else
 		error = block_truncate_page(inode->i_mapping,
 				newsize, ext2_get_block);
-- 
2.39.2

[RFCv4 2/9] fs/buffer.c: Add generic_buffer_fsync implementation

[Ritesh Harjani (IBM)]

Some of the higher layers like iomap takes inode_lock() when calling
generic_write_sync().
Also writeback already happens from other paths without inode lock,
so it's difficult to say that we really need sync_mapping_buffers() to
take any inode locking here. Having said that, let's add
generic_buffer_fsync() implementation in buffer.c with no
inode_lock/unlock() for now so that filesystems like ext2 and
ext4's nojournal mode can use it.

Ext4 when got converted to iomap for direct-io already copied it's own
variant of __generic_file_fsync() without lock. Hence let's add a helper
API and use it both in ext2 and ext4.

Later we can review other filesystems as well to see if we can make
generic_buffer_fsync() which does not take any inode_lock() as the
default path.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/buffer.c                 | 43 +++++++++++++++++++++++++++++++++++++
 include/linux/buffer_head.h |  2 ++
 2 files changed, 45 insertions(+)

diff --git a/fs/buffer.c b/fs/buffer.c
index 9e1e2add541e..df98f1966a71 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -593,6 +593,49 @@ int sync_mapping_buffers(struct address_space *mapping)
 }
 EXPORT_SYMBOL(sync_mapping_buffers);
 
+/**
+ * generic_buffer_fsync - generic buffer fsync implementation
+ * for simple filesystems with no inode lock
+ *
+ * @file:	file to synchronize
+ * @start:	start offset in bytes
+ * @end:	end offset in bytes (inclusive)
+ * @datasync:	only synchronize essential metadata if true
+ *
+ * This is a generic implementation of the fsync method for simple
+ * filesystems which track all non-inode metadata in the buffers list
+ * hanging off the address_space structure.
+ */
+int generic_buffer_fsync(struct file *file, loff_t start, loff_t end,
+			 bool datasync)
+{
+	struct inode *inode = file->f_mapping->host;
+	int err;
+	int ret;
+
+	err = file_write_and_wait_range(file, start, end);
+	if (err)
+		return err;
+
+	ret = sync_mapping_buffers(inode->i_mapping);
+	if (!(inode->i_state & I_DIRTY_ALL))
+		goto out;
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		goto out;
+
+	err = sync_inode_metadata(inode, 1);
+	if (ret == 0)
+		ret = err;
+
+out:
+	/* check and advance again to catch errors after syncing out buffers */
+	err = file_check_and_advance_wb_err(file);
+	if (ret == 0)
+		ret = err;
+	return ret;
+}
+EXPORT_SYMBOL(generic_buffer_fsync);
+
 /*
  * Called when we've recently written block `bblock', and it is known that
  * `bblock' was for a buffer_boundary() buffer.  This means that the block at
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 8f14dca5fed7..3170d0792d52 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -211,6 +211,8 @@ int inode_has_buffers(struct inode *);
 void invalidate_inode_buffers(struct inode *);
 int remove_inode_buffers(struct inode *inode);
 int sync_mapping_buffers(struct address_space *mapping);
+int generic_buffer_fsync(struct file *file, loff_t start, loff_t end,
+			 bool datasync);
 void clean_bdev_aliases(struct block_device *bdev, sector_t block,
 			sector_t len);
 static inline void clean_bdev_bh_alias(struct buffer_head *bh)
-- 
2.39.2

[RFCv4 3/9] ext4: Use generic_buffer_fsync() implementation

[Ritesh Harjani (IBM)]

ext4 when got converted to iomap for dio, it copied __generic_file_fsync
implementation to avoid taking inode_lock in order to avoid any deadlock
(since iomap takes an inode_lock while calling generic_write_sync()).

The previous patch already added generic_buffer_fsync() which does not
take any inode_lock(). Hence kill the redundant code and use
generic_buffer_fsync() function instead.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/ext4/fsync.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 027a7d7037a0..4f2af43f8b0f 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/writeback.h>
 #include <linux/blkdev.h>
+#include <linux/buffer_head.h>
 
 #include "ext4.h"
 #include "ext4_jbd2.h"
@@ -78,21 +79,13 @@ static int ext4_sync_parent(struct inode *inode)
 	return ret;
 }
 
-static int ext4_fsync_nojournal(struct inode *inode, bool datasync,
-				bool *needs_barrier)
+static int ext4_fsync_nojournal(struct file *file, loff_t start, loff_t end,
+				int datasync, bool *needs_barrier)
 {
-	int ret, err;
-
-	ret = sync_mapping_buffers(inode->i_mapping);
-	if (!(inode->i_state & I_DIRTY_ALL))
-		return ret;
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		return ret;
-
-	err = sync_inode_metadata(inode, 1);
-	if (!ret)
-		ret = err;
+	struct inode *inode = file->f_inode;
+	int ret;
 
+	ret = generic_buffer_fsync(file, start, end, datasync);
 	if (!ret)
 		ret = ext4_sync_parent(inode);
 	if (test_opt(inode->i_sb, BARRIER))
@@ -148,6 +141,14 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 		goto out;
 	}
 
+	if (!sbi->s_journal) {
+		ret = ext4_fsync_nojournal(file, start, end, datasync,
+					   &needs_barrier);
+		if (needs_barrier)
+			goto issue_flush;
+		goto out;
+	}
+
 	ret = file_write_and_wait_range(file, start, end);
 	if (ret)
 		goto out;
@@ -166,13 +167,12 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 	 *  (they were dirtied by commit).  But that's OK - the blocks are
 	 *  safe in-journal, which is all fsync() needs to ensure.
 	 */
-	if (!sbi->s_journal)
-		ret = ext4_fsync_nojournal(inode, datasync, &needs_barrier);
-	else if (ext4_should_journal_data(inode))
+	if (ext4_should_journal_data(inode))
 		ret = ext4_force_commit(inode->i_sb);
 	else
 		ret = ext4_fsync_journal(inode, datasync, &needs_barrier);
 
+issue_flush:
 	if (needs_barrier) {
 		err = blkdev_issue_flush(inode->i_sb->s_bdev);
 		if (!ret)
-- 
2.39.2

[RFCv4 4/9] ext2: Use generic_buffer_fsync() implementation

[Ritesh Harjani (IBM)]

Next patch converts ext2 to use iomap interface for DIO.
iomap layer can call generic_write_sync() -> ext2_fsync() from
iomap_dio_complete while still holding the inode_lock().

Now writeback from other paths doesn't need inode_lock().
It seems there is also no need of an inode_lock() for
sync_mapping_buffers(). It uses it's own mapping->private_lock
for it's buffer list handling.
Hence this patch is in preparation to move ext2 to iomap.
This uses generic_buffer_fsync() which does not take any inode_lock()
in ext2_fsync().

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/ext2/file.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 6b4bebe982ca..7603427fb38f 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -25,6 +25,7 @@
 #include <linux/quotaops.h>
 #include <linux/iomap.h>
 #include <linux/uio.h>
+#include <linux/buffer_head.h>
 #include "ext2.h"
 #include "xattr.h"
 #include "acl.h"
@@ -153,7 +154,9 @@ int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	int ret;
 	struct super_block *sb = file->f_mapping->host->i_sb;
 
-	ret = generic_file_fsync(file, start, end, datasync);
+	ret = generic_buffer_fsync(file, start, end, datasync);
+	if (!ret)
+		ret = blkdev_issue_flush(sb->s_bdev);
 	if (ret == -EIO)
 		/* We don't really know where the IO error happened... */
 		ext2_error(sb, __func__,
-- 
2.39.2

[RFCv4 5/9] ext2: Move direct-io to use iomap

[Ritesh Harjani (IBM)]

This patch converts ext2 direct-io path to iomap interface.
- This also takes care of DIO_SKIP_HOLES part in which we return -ENOTBLK
  from ext2_iomap_begin(), in case if the write is done on a hole.
- This fallbacks to buffered-io in case of DIO_SKIP_HOLES or in case of
  a partial write or if any error is detected in ext2_iomap_end().
  We try to return -ENOTBLK in such cases.
- For any unaligned or extending DIO writes, we pass
  IOMAP_DIO_FORCE_WAIT flag to ensure synchronous writes.
- For extending writes we set IOMAP_F_DIRTY in ext2_iomap_begin because
  otherwise with dsync writes on devices that support FUA, generic_write_sync
  won't be called and we might miss inode metadata updates.
- Since ext2 already now uses _nolock vartiant of sync write. Hence
  there is no inode lock problem with iomap in this patch.
- ext2_iomap_ops are now being shared by DIO, DAX & fiemap path

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/ext2/ext2.h  |   1 +
 fs/ext2/file.c  | 115 ++++++++++++++++++++++++++++++++++++++++++++++++
 fs/ext2/inode.c |  53 ++++++++++++++--------
 3 files changed, 150 insertions(+), 19 deletions(-)

diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index cb78d7dcfb95..00168447d48c 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -753,6 +753,7 @@ extern unsigned long ext2_count_free (struct buffer_head *, unsigned);
 extern struct inode *ext2_iget (struct super_block *, unsigned long);
 extern int ext2_write_inode (struct inode *, struct writeback_control *);
 extern void ext2_evict_inode(struct inode *);
+void ext2_write_failed(struct address_space *mapping, loff_t to);
 extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int);
 extern int ext2_setattr (struct mnt_idmap *, struct dentry *, struct iattr *);
 extern int ext2_getattr (struct mnt_idmap *, const struct path *,
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 7603427fb38f..704abe0a79cb 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -164,12 +164,124 @@ int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	return ret;
 }
 
+static ssize_t ext2_dio_read_iter(struct kiocb *iocb, struct iov_iter *to)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+	ssize_t ret;
+
+	inode_lock_shared(inode);
+	ret = iomap_dio_rw(iocb, to, &ext2_iomap_ops, NULL, 0, NULL, 0);
+	inode_unlock_shared(inode);
+
+	return ret;
+}
+
+static int ext2_dio_write_end_io(struct kiocb *iocb, ssize_t size,
+				 int error, unsigned int flags)
+{
+	loff_t pos = iocb->ki_pos;
+	struct inode *inode = file_inode(iocb->ki_filp);
+
+	if (error)
+		goto out;
+
+	/*
+	 * If we are extending the file, we have to update i_size here before
+	 * page cache gets invalidated in iomap_dio_rw(). This prevents racing
+	 * buffered reads from zeroing out too much from page cache pages.
+	 * Note that all extending writes always happens synchronously with
+	 * inode lock held by ext2_dio_write_iter(). So it is safe to update
+	 * inode size here for extending file writes.
+	 */
+	pos += size;
+	if (pos > i_size_read(inode)) {
+		i_size_write(inode, pos);
+		mark_inode_dirty(inode);
+	}
+out:
+	return error;
+}
+
+static const struct iomap_dio_ops ext2_dio_write_ops = {
+	.end_io = ext2_dio_write_end_io,
+};
+
+static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+	ssize_t ret;
+	unsigned int flags = 0;
+	unsigned long blocksize = inode->i_sb->s_blocksize;
+	loff_t offset = iocb->ki_pos;
+	loff_t count = iov_iter_count(from);
+
+	inode_lock(inode);
+	ret = generic_write_checks(iocb, from);
+	if (ret <= 0)
+		goto out_unlock;
+
+	ret = kiocb_modified(iocb);
+	if (ret)
+		goto out_unlock;
+
+	/* use IOMAP_DIO_FORCE_WAIT for unaligned or extending writes */
+	if (iocb->ki_pos + iov_iter_count(from) > i_size_read(inode) ||
+	   (!IS_ALIGNED(iocb->ki_pos | iov_iter_alignment(from), blocksize)))
+		flags |= IOMAP_DIO_FORCE_WAIT;
+
+	ret = iomap_dio_rw(iocb, from, &ext2_iomap_ops, &ext2_dio_write_ops,
+			   flags, NULL, 0);
+
+	/* ENOTBLK is magic return value for fallback to buffered-io */
+	if (ret == -ENOTBLK)
+		ret = 0;
+
+	if (ret < 0 && ret != -EIOCBQUEUED)
+		ext2_write_failed(inode->i_mapping, offset + count);
+
+	/* handle case for partial write and for fallback to buffered write */
+	if (ret >= 0 && iov_iter_count(from)) {
+		loff_t pos, endbyte;
+		ssize_t status;
+		int ret2;
+
+		iocb->ki_flags &= ~IOCB_DIRECT;
+		pos = iocb->ki_pos;
+		status = generic_perform_write(iocb, from);
+		if (unlikely(status < 0)) {
+			ret = status;
+			goto out_unlock;
+		}
+
+		iocb->ki_pos += status;
+		ret += status;
+		endbyte = pos + status - 1;
+		ret2 = filemap_write_and_wait_range(inode->i_mapping, pos,
+						    endbyte);
+		if (!ret2)
+			invalidate_mapping_pages(inode->i_mapping,
+						 pos >> PAGE_SHIFT,
+						 endbyte >> PAGE_SHIFT);
+		if (ret > 0)
+			generic_write_sync(iocb, ret);
+	}
+
+out_unlock:
+	inode_unlock(inode);
+	return ret;
+}
+
 static ssize_t ext2_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
 {
 #ifdef CONFIG_FS_DAX
 	if (IS_DAX(iocb->ki_filp->f_mapping->host))
 		return ext2_dax_read_iter(iocb, to);
 #endif
+	if (iocb->ki_flags & IOCB_DIRECT)
+		return ext2_dio_read_iter(iocb, to);
+
 	return generic_file_read_iter(iocb, to);
 }
 
@@ -179,6 +291,9 @@ static ssize_t ext2_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	if (IS_DAX(iocb->ki_filp->f_mapping->host))
 		return ext2_dax_write_iter(iocb, from);
 #endif
+	if (iocb->ki_flags & IOCB_DIRECT)
+		return ext2_dio_write_iter(iocb, from);
+
 	return generic_file_write_iter(iocb, from);
 }
 
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index dc76147e7b07..75983215c7a1 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -56,7 +56,7 @@ static inline int ext2_inode_is_fast_symlink(struct inode *inode)
 
 static void ext2_truncate_blocks(struct inode *inode, loff_t offset);
 
-static void ext2_write_failed(struct address_space *mapping, loff_t to)
+void ext2_write_failed(struct address_space *mapping, loff_t to)
 {
 	struct inode *inode = mapping->host;
 
@@ -809,9 +809,27 @@ static int ext2_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
 	bool new = false, boundary = false;
 	u32 bno;
 	int ret;
+	bool create = flags & IOMAP_WRITE;
+
+	/*
+	 * For writes that could fill holes inside i_size on a
+	 * DIO_SKIP_HOLES filesystem we forbid block creations: only
+	 * overwrites are permitted.
+	 */
+	if ((flags & IOMAP_DIRECT) &&
+	    (first_block << blkbits) < i_size_read(inode))
+		create = 0;
+
+	/*
+	 * Writes that span EOF might trigger an IO size update on completion,
+	 * so consider them to be dirty for the purposes of O_DSYNC even if
+	 * there is no other metadata changes pending or have been made here.
+	 */
+	if ((flags & IOMAP_WRITE) && offset + length > i_size_read(inode))
+		iomap->flags |= IOMAP_F_DIRTY;
 
 	ret = ext2_get_blocks(inode, first_block, max_blocks,
-			&bno, &new, &boundary, flags & IOMAP_WRITE);
+			&bno, &new, &boundary, create);
 	if (ret < 0)
 		return ret;
 
@@ -823,6 +841,12 @@ static int ext2_iomap_begin(struct inode *inode, loff_t offset, loff_t length,
 		iomap->bdev = inode->i_sb->s_bdev;
 
 	if (ret == 0) {
+		/*
+		 * Switch to buffered-io for writing to holes in a non-extent
+		 * based filesystem to avoid stale data exposure problem.
+		 */
+		if (!create && (flags & IOMAP_WRITE) && (flags & IOMAP_DIRECT))
+			return -ENOTBLK;
 		iomap->type = IOMAP_HOLE;
 		iomap->addr = IOMAP_NULL_ADDR;
 		iomap->length = 1 << blkbits;
@@ -844,6 +868,13 @@ static int
 ext2_iomap_end(struct inode *inode, loff_t offset, loff_t length,
 		ssize_t written, unsigned flags, struct iomap *iomap)
 {
+	/*
+	 * Switch to buffered-io in case of any error.
+	 * Blocks allocated can be used by the buffered-io path.
+	 */
+	if ((flags & IOMAP_DIRECT) && (flags & IOMAP_WRITE) && written == 0)
+		return -ENOTBLK;
+
 	if (iomap->type == IOMAP_MAPPED &&
 	    written < length &&
 	    (flags & IOMAP_WRITE))
@@ -908,22 +939,6 @@ static sector_t ext2_bmap(struct address_space *mapping, sector_t block)
 	return generic_block_bmap(mapping,block,ext2_get_block);
 }
 
-static ssize_t
-ext2_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
-{
-	struct file *file = iocb->ki_filp;
-	struct address_space *mapping = file->f_mapping;
-	struct inode *inode = mapping->host;
-	size_t count = iov_iter_count(iter);
-	loff_t offset = iocb->ki_pos;
-	ssize_t ret;
-
-	ret = blockdev_direct_IO(iocb, inode, iter, ext2_get_block);
-	if (ret < 0 && iov_iter_rw(iter) == WRITE)
-		ext2_write_failed(mapping, offset + count);
-	return ret;
-}
-
 static int
 ext2_writepages(struct address_space *mapping, struct writeback_control *wbc)
 {
@@ -946,7 +961,7 @@ const struct address_space_operations ext2_aops = {
 	.write_begin		= ext2_write_begin,
 	.write_end		= ext2_write_end,
 	.bmap			= ext2_bmap,
-	.direct_IO		= ext2_direct_IO,
+	.direct_IO		= noop_direct_IO,
 	.writepages		= ext2_writepages,
 	.migrate_folio		= buffer_migrate_folio,
 	.is_partially_uptodate	= block_is_partially_uptodate,
-- 
2.39.2

[RFCv4 6/9] fs.h: Add TRACE_IOCB_STRINGS for use in trace points

[Ritesh Harjani (IBM)]

Add TRACE_IOCB_STRINGS macro which can be used in the trace point patch to
print different flag values with meaningful string output.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 include/linux/fs.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/linux/fs.h b/include/linux/fs.h
index c85916e9f7db..bdc1f7ed2aba 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -340,6 +340,20 @@ enum rw_hint {
 /* can use bio alloc cache */
 #define IOCB_ALLOC_CACHE	(1 << 21)
 
+/* for use in trace events */
+#define TRACE_IOCB_STRINGS \
+	{ IOCB_HIPRI, "HIPRI"	}, \
+	{ IOCB_DSYNC, "DSYNC"	}, \
+	{ IOCB_SYNC, "SYNC"	}, \
+	{ IOCB_NOWAIT, "NOWAIT" }, \
+	{ IOCB_APPEND, "APPEND" }, \
+	{ IOCB_EVENTFD, "EVENTFD"}, \
+	{ IOCB_DIRECT, "DIRECT" }, \
+	{ IOCB_WRITE, "WRITE"	}, \
+	{ IOCB_WAITQ, "WAITQ"	}, \
+	{ IOCB_NOIO, "NOIO"	}, \
+	{ IOCB_ALLOC_CACHE, "ALLOC_CACHE" }
+
 struct kiocb {
 	struct file		*ki_filp;
 	loff_t			ki_pos;
-- 
2.39.2

[RFCv4 7/9] ext2: Add direct-io trace points

[Ritesh Harjani (IBM)]

This patch adds the trace point to ext2 direct-io apis
in fs/ext2/file.c

Here is how the output looks like
         xfs_io-4099  [004]    81.431800: ext2_dio_write_iter_start: dev 7:7 ino 0xc isize 0x4000 pos 0x4000 count 4096 flags DIRECT aio 0 ret=0
         xfs_io-4099  [004]    81.432002: ext2_dio_write_end_io: dev 7:7 ino 0xc isize 0x5000 pos 0x4000 count 4096 flags DIRECT aio 0 ret=0
         xfs_io-4099  [004]    81.432014: ext2_dio_write_iter_dio_end: dev 7:7 ino 0xc isize 0x5000 pos 0x5000 count 0 flags DIRECT aio 0 ret=4096
aio-dio-fcntl-r-4103  [005]    81.461123: ext2_dio_write_iter_start: dev 7:7 ino 0xc isize 0x400 pos 0x200 count 512 flags DIRECT|WRITE aio 1 ret=0
aio-dio-fcntl-r-4103  [005]    81.462099: ext2_dio_write_end_io: dev 7:7 ino 0xc isize 0x400 pos 0x200 count 512 flags DIRECT|WRITE aio 1 ret=0
aio-dio-fcntl-r-4103  [005]    81.462133: ext2_dio_write_iter_dio_end: dev 7:7 ino 0xc isize 0x400 pos 0x400 count 0 flags DIRECT|WRITE aio 1 ret=512

Reported-and-tested-by: Disha Goel <disgoel@linux.ibm.com>
[Need to add CFLAGS_trace for fixing unable to find trace file problem]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/ext2/Makefile |  5 ++-
 fs/ext2/file.c   | 10 +++++-
 fs/ext2/trace.c  |  6 ++++
 fs/ext2/trace.h  | 94 ++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 113 insertions(+), 2 deletions(-)
 create mode 100644 fs/ext2/trace.c
 create mode 100644 fs/ext2/trace.h

diff --git a/fs/ext2/Makefile b/fs/ext2/Makefile
index 311479d864a7..8860948ef9ca 100644
--- a/fs/ext2/Makefile
+++ b/fs/ext2/Makefile
@@ -6,7 +6,10 @@
 obj-$(CONFIG_EXT2_FS) += ext2.o
 
 ext2-y := balloc.o dir.o file.o ialloc.o inode.o \
-	  ioctl.o namei.o super.o symlink.o
+	  ioctl.o namei.o super.o symlink.o trace.o
+
+# For tracepoints to include our trace.h from tracepoint infrastructure
+CFLAGS_trace.o := -I$(src)
 
 ext2-$(CONFIG_EXT2_FS_XATTR)	 += xattr.o xattr_user.o xattr_trusted.o
 ext2-$(CONFIG_EXT2_FS_POSIX_ACL) += acl.o
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 704abe0a79cb..c3e8d8cc6792 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -29,6 +29,7 @@
 #include "ext2.h"
 #include "xattr.h"
 #include "acl.h"
+#include "trace.h"
 
 #ifdef CONFIG_FS_DAX
 static ssize_t ext2_dax_read_iter(struct kiocb *iocb, struct iov_iter *to)
@@ -170,9 +171,11 @@ static ssize_t ext2_dio_read_iter(struct kiocb *iocb, struct iov_iter *to)
 	struct inode *inode = file->f_mapping->host;
 	ssize_t ret;
 
+	trace_ext2_dio_read_begin(iocb, to, 0);
 	inode_lock_shared(inode);
 	ret = iomap_dio_rw(iocb, to, &ext2_iomap_ops, NULL, 0, NULL, 0);
 	inode_unlock_shared(inode);
+	trace_ext2_dio_read_end(iocb, to, ret);
 
 	return ret;
 }
@@ -200,6 +203,7 @@ static int ext2_dio_write_end_io(struct kiocb *iocb, ssize_t size,
 		mark_inode_dirty(inode);
 	}
 out:
+	trace_ext2_dio_write_endio(iocb, size, error);
 	return error;
 }
 
@@ -216,7 +220,9 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	unsigned long blocksize = inode->i_sb->s_blocksize;
 	loff_t offset = iocb->ki_pos;
 	loff_t count = iov_iter_count(from);
+	ssize_t status = 0;
 
+	trace_ext2_dio_write_begin(iocb, from, 0);
 	inode_lock(inode);
 	ret = generic_write_checks(iocb, from);
 	if (ret <= 0)
@@ -244,7 +250,6 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	/* handle case for partial write and for fallback to buffered write */
 	if (ret >= 0 && iov_iter_count(from)) {
 		loff_t pos, endbyte;
-		ssize_t status;
 		int ret2;
 
 		iocb->ki_flags &= ~IOCB_DIRECT;
@@ -270,6 +275,9 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from)
 
 out_unlock:
 	inode_unlock(inode);
+	if (status)
+		trace_ext2_dio_write_buff_end(iocb, from, status);
+	trace_ext2_dio_write_end(iocb, from, ret);
 	return ret;
 }
 
diff --git a/fs/ext2/trace.c b/fs/ext2/trace.c
new file mode 100644
index 000000000000..b01cdf6526fd
--- /dev/null
+++ b/fs/ext2/trace.c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "ext2.h"
+#include <linux/uio.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/fs/ext2/trace.h b/fs/ext2/trace.h
new file mode 100644
index 000000000000..37228a2c2fa6
--- /dev/null
+++ b/fs/ext2/trace.h
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ext2
+
+#if !defined(_EXT2_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _EXT2_TRACE_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(ext2_dio_class,
+	TP_PROTO(struct kiocb *iocb, struct iov_iter *iter, ssize_t ret),
+	TP_ARGS(iocb, iter, ret),
+	TP_STRUCT__entry(
+		__field(dev_t,	dev)
+		__field(ino_t,	ino)
+		__field(loff_t, isize)
+		__field(loff_t, pos)
+		__field(size_t,	count)
+		__field(int,	ki_flags)
+		__field(bool,	aio)
+		__field(ssize_t, ret)
+	),
+	TP_fast_assign(
+		__entry->dev = file_inode(iocb->ki_filp)->i_sb->s_dev;
+		__entry->ino = file_inode(iocb->ki_filp)->i_ino;
+		__entry->isize = file_inode(iocb->ki_filp)->i_size;
+		__entry->pos = iocb->ki_pos;
+		__entry->count = iov_iter_count(iter);
+		__entry->ki_flags = iocb->ki_flags;
+		__entry->aio = !is_sync_kiocb(iocb);
+		__entry->ret = ret;
+	),
+	TP_printk("dev %d:%d ino 0x%lx isize 0x%llx pos 0x%llx count %zu flags %s aio %d ret %zd",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->isize,
+		  __entry->pos,
+		  __entry->count,
+		  __print_flags(__entry->ki_flags, "|", TRACE_IOCB_STRINGS),
+		  __entry->aio,
+		  __entry->ret)
+);
+
+#define DEFINE_DIO_RW_EVENT(name)					  \
+DEFINE_EVENT(ext2_dio_class, name,					  \
+	TP_PROTO(struct kiocb *iocb, struct iov_iter *iter, ssize_t ret), \
+	TP_ARGS(iocb, iter, ret))
+DEFINE_DIO_RW_EVENT(ext2_dio_write_begin);
+DEFINE_DIO_RW_EVENT(ext2_dio_write_end);
+DEFINE_DIO_RW_EVENT(ext2_dio_write_buff_end);
+DEFINE_DIO_RW_EVENT(ext2_dio_read_begin);
+DEFINE_DIO_RW_EVENT(ext2_dio_read_end);
+
+TRACE_EVENT(ext2_dio_write_endio,
+	TP_PROTO(struct kiocb *iocb, ssize_t size, int ret),
+	TP_ARGS(iocb, size, ret),
+	TP_STRUCT__entry(
+		__field(dev_t,	dev)
+		__field(ino_t,	ino)
+		__field(loff_t, isize)
+		__field(loff_t, pos)
+		__field(ssize_t, size)
+		__field(int,	ki_flags)
+		__field(bool,	aio)
+		__field(int,	ret)
+	),
+	TP_fast_assign(
+		__entry->dev = file_inode(iocb->ki_filp)->i_sb->s_dev;
+		__entry->ino = file_inode(iocb->ki_filp)->i_ino;
+		__entry->isize = file_inode(iocb->ki_filp)->i_size;
+		__entry->pos = iocb->ki_pos;
+		__entry->size = size;
+		__entry->ki_flags = iocb->ki_flags;
+		__entry->aio = !is_sync_kiocb(iocb);
+		__entry->ret = ret;
+	),
+	TP_printk("dev %d:%d ino 0x%lx isize 0x%llx pos 0x%llx size %zd flags %s aio %d ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->isize,
+		  __entry->pos,
+		  __entry->size,
+		  __print_flags(__entry->ki_flags, "|", TRACE_IOCB_STRINGS),
+		  __entry->aio,
+		  __entry->ret)
+);
+
+#endif /* _EXT2_TRACE_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+#include <trace/define_trace.h>
-- 
2.39.2

[RFCv4 8/9] iomap: Remove IOMAP_DIO_NOSYNC unused dio flag

[Ritesh Harjani (IBM)]

IOMAP_DIO_NOSYNC earlier was added for use in btrfs. But it seems for
aio dsync writes this is not useful anyway. For aio dsync case, we
we queue the request and return -EIOCBQUEUED. Now, since IOMAP_DIO_NOSYNC
doesn't let iomap_dio_complete() to call generic_write_sync(),
hence we may lose the sync write.

Hence kill this flag as it is not in use by any FS now.

Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/iomap/direct-io.c  | 2 +-
 include/linux/iomap.h | 6 ------
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
index f771001574d0..36ab1152dbea 100644
--- a/fs/iomap/direct-io.c
+++ b/fs/iomap/direct-io.c
@@ -541,7 +541,7 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 		}
 
 		/* for data sync or sync, we need sync completion processing */
-		if (iocb_is_dsync(iocb) && !(dio_flags & IOMAP_DIO_NOSYNC)) {
+		if (iocb_is_dsync(iocb)) {
 			dio->flags |= IOMAP_DIO_NEED_SYNC;
 
 		       /*
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 0f8123504e5e..e2b836c2e119 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -377,12 +377,6 @@ struct iomap_dio_ops {
  */
 #define IOMAP_DIO_PARTIAL		(1 << 2)
 
-/*
- * The caller will sync the write if needed; do not sync it within
- * iomap_dio_rw.  Overrides IOMAP_DIO_FORCE_WAIT.
- */
-#define IOMAP_DIO_NOSYNC		(1 << 3)
-
 ssize_t iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 		const struct iomap_ops *ops, const struct iomap_dio_ops *dops,
 		unsigned int dio_flags, void *private, size_t done_before);
-- 
2.39.2

[RFCv4 9/9] iomap: Add couple of DIO tracepoints

[Ritesh Harjani (IBM)]

Add iomap_dio_rw_queued and iomap_dio_complete tracepoint.
iomap_dio_rw_queued is mostly only to know that the request was queued
and -EIOCBQUEUED was returned. It is mostly iomap_dio_complete which has
all the details.

<output log>
           a.out-1827  [004]   707.806763: iomap_dio_rw_queued:  dev 7:7 ino 0xd size 0x1000 offset 0x1000 length 0x0
     ksoftirqd/3-31    [003]   707.806968: iomap_dio_complete:   dev 7:7 ino 0xd size 0x1000 offset 0x1000 flags DIRECT aio 1 error 0 ret 4096

Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
---
 fs/iomap/direct-io.c |  5 ++++-
 fs/iomap/trace.c     |  1 +
 fs/iomap/trace.h     | 35 +++++++++++++++++++++++++++++++++++
 3 files changed, 40 insertions(+), 1 deletion(-)

diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
index 36ab1152dbea..cef28cfd77b7 100644
--- a/fs/iomap/direct-io.c
+++ b/fs/iomap/direct-io.c
@@ -130,6 +130,7 @@ ssize_t iomap_dio_complete(struct iomap_dio *dio)
 	if (ret > 0)
 		ret += dio->done_before;
 
+	trace_iomap_dio_complete(iocb, dio->error, ret);
 	kfree(dio);
 
 	return ret;
@@ -650,8 +651,10 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 	 */
 	dio->wait_for_completion = wait_for_completion;
 	if (!atomic_dec_and_test(&dio->ref)) {
-		if (!wait_for_completion)
+		if (!wait_for_completion) {
+			trace_iomap_dio_rw_queued(inode, iomi.pos, iomi.len);
 			return ERR_PTR(-EIOCBQUEUED);
+		}
 
 		for (;;) {
 			set_current_state(TASK_UNINTERRUPTIBLE);
diff --git a/fs/iomap/trace.c b/fs/iomap/trace.c
index da217246b1a9..728d5443daf5 100644
--- a/fs/iomap/trace.c
+++ b/fs/iomap/trace.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2019 Christoph Hellwig
  */
 #include <linux/iomap.h>
+#include <linux/uio.h>
 
 /*
  * We include this last to have the helpers above available for the trace
diff --git a/fs/iomap/trace.h b/fs/iomap/trace.h
index f6ea9540d082..9c017af93302 100644
--- a/fs/iomap/trace.h
+++ b/fs/iomap/trace.h
@@ -83,6 +83,7 @@ DEFINE_RANGE_EVENT(iomap_writepage);
 DEFINE_RANGE_EVENT(iomap_release_folio);
 DEFINE_RANGE_EVENT(iomap_invalidate_folio);
 DEFINE_RANGE_EVENT(iomap_dio_invalidate_fail);
+DEFINE_RANGE_EVENT(iomap_dio_rw_queued);
 
 #define IOMAP_TYPE_STRINGS \
 	{ IOMAP_HOLE,		"HOLE" }, \
@@ -183,6 +184,40 @@ TRACE_EVENT(iomap_iter,
 		   (void *)__entry->caller)
 );
 
+TRACE_EVENT(iomap_dio_complete,
+	TP_PROTO(struct kiocb *iocb, int error, ssize_t ret),
+	TP_ARGS(iocb, error, ret),
+	TP_STRUCT__entry(
+		__field(dev_t,	dev)
+		__field(ino_t,	ino)
+		__field(loff_t, isize)
+		__field(loff_t, pos)
+		__field(int,	ki_flags)
+		__field(bool,	aio)
+		__field(int,	error)
+		__field(ssize_t, ret)
+	),
+	TP_fast_assign(
+		__entry->dev = file_inode(iocb->ki_filp)->i_sb->s_dev;
+		__entry->ino = file_inode(iocb->ki_filp)->i_ino;
+		__entry->isize = file_inode(iocb->ki_filp)->i_size;
+		__entry->pos = iocb->ki_pos;
+		__entry->ki_flags = iocb->ki_flags;
+		__entry->aio = !is_sync_kiocb(iocb);
+		__entry->error = error;
+		__entry->ret = ret;
+	),
+	TP_printk("dev %d:%d ino 0x%lx size 0x%llx offset 0x%llx flags %s aio %d error %d ret %zd",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->isize,
+		  __entry->pos,
+		  __print_flags(__entry->ki_flags, "|", TRACE_IOCB_STRINGS),
+		  __entry->aio,
+		  __entry->error,
+		  __entry->ret)
+);
+
 #endif /* _IOMAP_TRACE_H */
 
 #undef TRACE_INCLUDE_PATH
-- 
2.39.2

Re: [RFCv4 2/9] fs/buffer.c: Add generic_buffer_fsync implementation

[Christoph Hellwig]

Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [RFCv4 9/9] iomap: Add couple of DIO tracepoints

[Christoph Hellwig]

On Sat, Apr 15, 2023 at 01:14:30PM +0530, Ritesh Harjani (IBM) wrote:
> Add iomap_dio_rw_queued and iomap_dio_complete tracepoint.
> iomap_dio_rw_queued is mostly only to know that the request was queued
> and -EIOCBQUEUED was returned. It is mostly iomap_dio_complete which has
> all the details.

Everything that is here looks good to me.  But it seems like we lost
the _begin tracepoint?

Re: [RFCv4 5/9] ext2: Move direct-io to use iomap

[Christoph Hellwig]

Looks good based on my limited ext2 knowledge:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [RFCv4 9/9] iomap: Add couple of DIO tracepoints

[Christoph Hellwig]

On Sun, Apr 16, 2023 at 05:24:25PM +0530, Ritesh Harjani wrote:
> Sorry, my bad, I might have only partially understood your review
> comment then. Will quickly send the next rev.
> So in the next rev. will only just add a _begin tracepoint in
> __iomap_dio_rw() function. Rest everything should be as is.

Thanks and sorry for beeing unclear.

Re: [RFCv4 9/9] iomap: Add couple of DIO tracepoints

[Ritesh Harjani]

Christoph Hellwig <hch@infradead.org> writes:

> On Sat, Apr 15, 2023 at 01:14:30PM +0530, Ritesh Harjani (IBM) wrote:
>> Add iomap_dio_rw_queued and iomap_dio_complete tracepoint.
>> iomap_dio_rw_queued is mostly only to know that the request was queued
>> and -EIOCBQUEUED was returned. It is mostly iomap_dio_complete which has
>> all the details.
>
> Everything that is here looks good to me.  But it seems like we lost
> the _begin tracepoint?

Sorry, my bad, I might have only partially understood your review
comment then. Will quickly send the next rev.
So in the next rev. will only just add a _begin tracepoint in
__iomap_dio_rw() function. Rest everything should be as is.

Right?