[PATCH AUTOSEL 4.14 002/170] staging: iio: adc: ad7280a: handle error from __ad7280_read32()

[PATCH AUTOSEL 4.14 002/170] staging: iio: adc: ad7280a: handle error from __ad7280_read32()

[Sasha Levin]

From: Slawomir Stepien <sst@poczta.fm>

[ Upstream commit 0559ef7fde67bc6c83c6eb6329dbd6649528263e ]

Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative
error code. This change will ensure that this error is being passed up
in the call stack, so it can be handled.

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/adc/ad7280a.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index f85dde9805e0..f17f700ea04f 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -256,7 +256,9 @@ static int ad7280_read(struct ad7280_state *st, unsigned int devaddr,
 	if (ret)
 		return ret;
 
-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;
 
 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -294,7 +296,9 @@ static int ad7280_read_channel(struct ad7280_state *st, unsigned int devaddr,
 
 	ad7280_delay(st);
 
-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;
 
 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -327,7 +331,9 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned int cnt,
 	ad7280_delay(st);
 
 	for (i = 0; i < cnt; i++) {
-		__ad7280_read32(st, &tmp);
+		ret = __ad7280_read32(st, &tmp);
+		if (ret)
+			return ret;
 
 		if (ad7280_check_crc(st, tmp))
 			return -EIO;
@@ -370,7 +376,10 @@ static int ad7280_chain_setup(struct ad7280_state *st)
 		return ret;
 
 	for (n = 0; n <= AD7280A_MAX_CHAIN; n++) {
-		__ad7280_read32(st, &val);
+		ret = __ad7280_read32(st, &val);
+		if (ret)
+			return ret;
+
 		if (val == 0)
 			return n - 1;
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 024/170] staging:iio:ad2s90: Make probe handle spi_setup failure

[Sasha Levin]

From: Matheus Tavares <matheus.bernardino@usp.br>

[ Upstream commit b3a3eafeef769c6982e15f83631dcbf8d1794efb ]

Previously, ad2s90_probe ignored the return code from spi_setup, not
handling its possible failure. This patch makes ad2s90_probe check if
the code is an error code and, if so, do the following:

- Call dev_err with an appropriate error message.
- Return the spi_setup's error code.

Note: The 'return ret' statement could be out of the 'if' block, but
this whole block will be moved up in the function in the patch:
'staging:iio:ad2s90: Move device registration to the end of probe'.

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/resolver/ad2s90.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index b2270908f26f..cbee9ad00f0d 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -86,7 +86,12 @@ static int ad2s90_probe(struct spi_device *spi)
 	/* need 600ns between CS and the first falling edge of SCLK */
 	spi->max_speed_hz = 830000;
 	spi->mode = SPI_MODE_3;
-	spi_setup(spi);
+	ret = spi_setup(spi);
+
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi_setup failed!\n");
+		return ret;
+	}
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 028/170] staging: iio: ad7780: update voltage on read

[Sasha Levin]

From: Renato Lui Geh <renatogeh@gmail.com>

[ Upstream commit 336650c785b62c3bea7c8cf6061c933a90241f67 ]

The ad7780 driver previously did not read the correct device output, as
it read an outdated value set at initialization. It now updates its
voltage on read.

Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/adc/ad7780.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index dec3ba6eba8a..52613f6a9dd8 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -87,12 +87,16 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7780_state *st = iio_priv(indio_dev);
+	int voltage_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = st->int_vref_mv * st->gain;
+		voltage_uv = regulator_get_voltage(st->reg);
+		if (voltage_uv < 0)
+			return voltage_uv;
+		*val = (voltage_uv / 1000) * st->gain;
 		*val2 = chan->scan_type.realbits - 1;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
-- 
2.19.1

[PATCH AUTOSEL 4.14 039/170] iio: adc: meson-saradc: check for devm_kasprintf failure

[Sasha Levin]

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit aad172b017617994343e36d8659c69e14cd694fd ]

devm_kasprintf() may return NULL on failure of internal allocation thus
the assignments to  init.name  are not safe if not checked. On error
meson_sar_adc_clk_init() returns negative values so -ENOMEM in the
(unlikely) failure case of devm_kasprintf() should be fine here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/meson_saradc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 11484cb38b84..9a52a91166d2 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -585,6 +585,9 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 
 	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
 				   indio_dev->dev.of_node);
+	if (!init.name)
+		return -ENOMEM;
+
 	init.flags = 0;
 	init.ops = &clk_divider_ops;
 	clk_parents[0] = __clk_get_name(priv->clkin);
@@ -604,6 +607,9 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 
 	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
 				   indio_dev->dev.of_node);
+	if (!init.name)
+		return -ENOMEM;
+
 	init.flags = CLK_SET_RATE_PARENT;
 	init.ops = &clk_gate_ops;
 	clk_parents[0] = __clk_get_name(priv->adc_div_clk);
-- 
2.19.1

[PATCH AUTOSEL 4.14 040/170] iio: adc: meson-saradc: fix internal clock names

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 50314f98b0ac468218e7c9af8c99f215a35436df ]

Before this patch we are registering the internal clocks (for example on
Meson8b, where the SAR ADC IP block implements the divider and gate
clocks) with the following names:
- /soc/cbus@c1100000/adc@8680#adc_div
- /soc/cbus@c1100000/adc@8680#adc_en

This is bad because the common clock framework uses the clock to create
a directory in <debugfs>/clk. With such name, the directory creation
(silently) fails and the debugfs entry ends up being created at the
debugfs root.

With this change, the new clock names are:
- c1108680.adc#adc_div
- c1108680.adc#adc_en

This matches the clock naming scheme used in the PWM, Ethernet and MMC
drivers. It also fixes the problem with debugfs.
The idea is shamelessly taken from commit b96e9eb62841c5 ("pwm: meson:
Fix mux clock names").

Fixes: 3921db46a8c5bc ("iio: Convert to using %pOF instead of full_name")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/meson_saradc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 9a52a91166d2..2515badf8b28 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -583,8 +583,8 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	struct clk_init_data init;
 	const char *clk_parents[1];
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
-				   indio_dev->dev.of_node);
+	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
+				   dev_name(indio_dev->dev.parent));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -605,8 +605,8 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	if (WARN_ON(IS_ERR(priv->adc_div_clk)))
 		return PTR_ERR(priv->adc_div_clk);
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
-				   indio_dev->dev.of_node);
+	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
+				   dev_name(indio_dev->dev.parent));
 	if (!init.name)
 		return -ENOMEM;
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 041/170] iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7f6232e69539971cf9eaed07a6c14ab4a2361133 ]

Various 2-in-1's use KIOX010A and KIOX020A as HIDs for 2 KXCJ91008
accelerometers. The KIOX010A HID is for the one in the base and the
KIOX020A for the accelerometer in the keyboard.

Since userspace does not have a way yet to deal with (or ignore) the
accelerometer in the keyboard, this commit just adds the KIOX010A HID
for now so that display rotation will work.

Related: https://github.com/hadess/iio-sensor-proxy/issues/166
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/accel/kxcjk-1013.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 3f968c46e667..784636800361 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1393,6 +1393,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1008", KXCJ91008},
 	{"KXCJ9000", KXCJ91008},
 	{"KIOX000A", KXCJ91008},
+	{"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
 	{"KXTJ1009", KXTJ21009},
 	{"SMO8500",  KXCJ91008},
 	{ },
-- 
2.19.1