From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: <devicetree@vger.kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v2 4/7] iio: adc: max1027: Prepare the introduction of different resolutions
Date: Thu, 3 Oct 2019 19:33:58 +0200 [thread overview]
Message-ID: <20191003173401.16343-5-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20191003173401.16343-1-miquel.raynal@bootlin.com>
Maxim's max1027/29/31 series returns the measured voltages with a
resolution of 10 bits. There is a very similar series, max1227/29/31
which works identically but uses a resolution of 12 bits. Prepare the
support for these chips by turning the 'depth' into a macro parameter
instead of hardcoding it everywhere. Also reorganize just a bit the
macros at the top to avoid repeating tens of lines when adding support
for a new chip.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/iio/adc/max1027.c | 78 ++++++++++++++++++---------------------
1 file changed, 36 insertions(+), 42 deletions(-)
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index f9b473ee6711..5d5d223dd42a 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -83,7 +83,7 @@ static const struct of_device_id max1027_adc_dt_ids[] = {
MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
#endif
-#define MAX1027_V_CHAN(index) \
+#define MAX1027_V_CHAN(index, depth) \
{ \
.type = IIO_VOLTAGE, \
.indexed = 1, \
@@ -93,7 +93,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
.scan_index = index + 1, \
.scan_type = { \
.sign = 'u', \
- .realbits = 10, \
+ .realbits = depth, \
.storagebits = 16, \
.shift = 2, \
.endianness = IIO_BE, \
@@ -115,52 +115,42 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids);
}, \
}
+#define MAX1X27_CHANNELS(depth) \
+ MAX1027_T_CHAN, \
+ MAX1027_V_CHAN(0, depth), \
+ MAX1027_V_CHAN(1, depth), \
+ MAX1027_V_CHAN(2, depth), \
+ MAX1027_V_CHAN(3, depth), \
+ MAX1027_V_CHAN(4, depth), \
+ MAX1027_V_CHAN(5, depth), \
+ MAX1027_V_CHAN(6, depth), \
+ MAX1027_V_CHAN(7, depth)
+
+#define MAX1X29_CHANNELS(depth) \
+ MAX1027_V_CHAN(8, depth), \
+ MAX1027_V_CHAN(9, depth), \
+ MAX1027_V_CHAN(10, depth), \
+ MAX1027_V_CHAN(11, depth)
+
+#define MAX1X31_CHANNELS(depth) \
+ MAX1027_V_CHAN(12, depth), \
+ MAX1027_V_CHAN(13, depth), \
+ MAX1027_V_CHAN(14, depth), \
+ MAX1027_V_CHAN(15, depth)
+
static const struct iio_chan_spec max1027_channels[] = {
- MAX1027_T_CHAN,
- MAX1027_V_CHAN(0),
- MAX1027_V_CHAN(1),
- MAX1027_V_CHAN(2),
- MAX1027_V_CHAN(3),
- MAX1027_V_CHAN(4),
- MAX1027_V_CHAN(5),
- MAX1027_V_CHAN(6),
- MAX1027_V_CHAN(7)
+ MAX1X27_CHANNELS(10)
};
static const struct iio_chan_spec max1029_channels[] = {
- MAX1027_T_CHAN,
- MAX1027_V_CHAN(0),
- MAX1027_V_CHAN(1),
- MAX1027_V_CHAN(2),
- MAX1027_V_CHAN(3),
- MAX1027_V_CHAN(4),
- MAX1027_V_CHAN(5),
- MAX1027_V_CHAN(6),
- MAX1027_V_CHAN(7),
- MAX1027_V_CHAN(8),
- MAX1027_V_CHAN(9),
- MAX1027_V_CHAN(10),
- MAX1027_V_CHAN(11)
+ MAX1X27_CHANNELS(10),
+ MAX1X29_CHANNELS(10)
};
static const struct iio_chan_spec max1031_channels[] = {
- MAX1027_T_CHAN,
- MAX1027_V_CHAN(0),
- MAX1027_V_CHAN(1),
- MAX1027_V_CHAN(2),
- MAX1027_V_CHAN(3),
- MAX1027_V_CHAN(4),
- MAX1027_V_CHAN(5),
- MAX1027_V_CHAN(6),
- MAX1027_V_CHAN(7),
- MAX1027_V_CHAN(8),
- MAX1027_V_CHAN(9),
- MAX1027_V_CHAN(10),
- MAX1027_V_CHAN(11),
- MAX1027_V_CHAN(12),
- MAX1027_V_CHAN(13),
- MAX1027_V_CHAN(14),
- MAX1027_V_CHAN(15)
+ MAX1X27_CHANNELS(10),
+ MAX1X29_CHANNELS(10),
+ MAX1X31_CHANNELS(10)
};
static const unsigned long max1027_available_scan_masks[] = {
@@ -181,6 +171,7 @@ static const unsigned long max1031_available_scan_masks[] = {
struct max1027_chip_info {
const struct iio_chan_spec *channels;
unsigned int num_channels;
+ unsigned int depth;
const unsigned long *available_scan_masks;
};
@@ -188,16 +179,19 @@ static const struct max1027_chip_info max1027_chip_info_tbl[] = {
[max1027] = {
.channels = max1027_channels,
.num_channels = ARRAY_SIZE(max1027_channels),
+ .depth = 10,
.available_scan_masks = max1027_available_scan_masks,
},
[max1029] = {
.channels = max1029_channels,
.num_channels = ARRAY_SIZE(max1029_channels),
+ .depth = 10,
.available_scan_masks = max1029_available_scan_masks,
},
[max1031] = {
.channels = max1031_channels,
.num_channels = ARRAY_SIZE(max1031_channels),
+ .depth = 10,
.available_scan_masks = max1031_available_scan_masks,
},
};
@@ -284,7 +278,7 @@ static int max1027_read_raw(struct iio_dev *indio_dev,
break;
case IIO_VOLTAGE:
*val = 2500;
- *val2 = 10;
+ *val2 = st->info->depth;
ret = IIO_VAL_FRACTIONAL_LOG2;
break;
default:
--
2.20.1
next prev parent reply other threads:[~2019-10-03 17:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-03 17:33 [PATCH v2 0/7] Introduce max12xx ADC support Miquel Raynal
2019-10-03 17:33 ` [PATCH v2 1/7] iio: adc: max1027: Add debugfs register read support Miquel Raynal
2019-10-06 10:04 ` Jonathan Cameron
2019-10-07 10:00 ` Miquel Raynal
2019-10-12 13:56 ` Jonathan Cameron
2019-10-03 17:33 ` [PATCH v2 2/7] iio: adc: max1027: Make it optional to use interrupts Miquel Raynal
2019-10-06 10:18 ` Jonathan Cameron
2019-10-07 10:01 ` Miquel Raynal
2019-10-07 11:44 ` Jonathan Cameron
2019-10-03 17:33 ` [PATCH v2 3/7] iio: adc: max1027: Reset the device at probe time Miquel Raynal
2019-10-03 17:33 ` Miquel Raynal [this message]
2019-10-06 10:22 ` [PATCH v2 4/7] iio: adc: max1027: Prepare the introduction of different resolutions Jonathan Cameron
2019-10-07 10:03 ` Miquel Raynal
2019-10-03 17:33 ` [PATCH v2 5/7] iio: adc: max1027: Introduce 12-bit devices support Miquel Raynal
2019-10-06 10:24 ` Jonathan Cameron
2019-10-03 17:34 ` [PATCH v2 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional Miquel Raynal
2019-10-03 17:34 ` [PATCH v2 7/7] dt-bindings: iio: adc: max1027: Document max12xx series compatibles Miquel Raynal
2019-10-06 10:27 ` Jonathan Cameron
2019-10-07 10:04 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191003173401.16343-5-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).