From: Jiada Wang <jiada_wang@mentor.com>
To: <jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<rydberg@bitmath.org>, <dmitry.torokhov@gmail.com>,
<nick@shmanahar.org>, <bsz@semihalf.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
<jiada_wang@mentor.com>
Subject: [PATCH v7 32/48] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc
Date: Wed, 12 Feb 2020 00:42:02 -0800 [thread overview]
Message-ID: <20200212084218.32344-33-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200212084218.32344-1-jiada_wang@mentor.com>
From: Kautuk Consul <kautuk_consul@mentor.com>
We now prefer to rely on the calculated CRC and not on the CRC stored in
the file.
The new logic is as follows:
1) stored CRC of file != calculated CRC of file, then refuse the possible
corrupted file
2) calculated CRC of file != CRC of configuration in controller, then
update configuration in controller
3) calculated CRC of file == CRC of configuration in controller, then
ignore configuration file
Signed-off-by: Kautuk Consul <kautuk_consul@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++-----------
1 file changed, 36 insertions(+), 29 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 7316a7613041..3c15ce499e34 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1905,7 +1905,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
int ret;
int offset;
int i;
- u32 info_crc, config_crc, calculated_crc;
+ u32 info_crc, config_crc, calculated_crc = 0;
u16 crc_start = 0;
/* Make zero terminated copy of the OBP_RAW file */
@@ -1968,30 +1968,6 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
}
cfg.raw_pos += offset;
- /*
- * The Info Block CRC is calculated over mxt_info and the object
- * table. If it does not match then we are trying to load the
- * configuration from a different chip or firmware version, so
- * the configuration CRC is invalid anyway.
- */
- if (info_crc == data->info_crc) {
- if (config_crc == 0 || data->config_crc == 0) {
- dev_info(dev, "CRC zero, attempting to apply config\n");
- } else if (config_crc == data->config_crc) {
- dev_dbg(dev, "Config CRC 0x%06X: OK\n",
- data->config_crc);
- ret = 0;
- goto release_raw;
- } else {
- dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
- data->config_crc, config_crc);
- }
- } else {
- dev_warn(dev,
- "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
- data->info_crc, info_crc);
- }
-
/* Malloc memory to store configuration */
cfg.start_ofs = MXT_OBJECT_START +
data->info->object_num * sizeof(struct mxt_object) +
@@ -2015,14 +1991,45 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
else
dev_warn(dev, "Could not find CRC start\n");
- if (crc_start > cfg.start_ofs) {
+ if (crc_start > cfg.start_ofs)
calculated_crc = mxt_calculate_crc(cfg.mem,
crc_start - cfg.start_ofs,
cfg.mem_size);
- if (config_crc > 0 && config_crc != calculated_crc)
- dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
- calculated_crc, config_crc);
+ /* If the CRC stored in the file is not the same as what
+ * was calculated by mxt_calculate_crc, this means we
+ * have to refuse the config file and abort download.
+ */
+ if (config_crc != calculated_crc) {
+ dev_warn(dev,
+ "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
+ calculated_crc, config_crc);
+ ret = 0;
+ goto release_mem;
+ }
+
+ /*
+ * The Info Block CRC is calculated over mxt_info and the object
+ * table. If it does not match then we are trying to load the
+ * configuration from a different chip or firmware version, so
+ * the configuration CRC is invalid anyway.
+ */
+ if (info_crc == data->info_crc) {
+ if (config_crc == 0 || data->config_crc == 0) {
+ dev_info(dev, "CRC zero, attempting to apply config\n");
+ } else if (config_crc == data->config_crc) {
+ dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+ data->config_crc);
+ ret = 0;
+ goto release_mem;
+ } else {
+ dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+ data->config_crc, config_crc);
+ }
+ } else {
+ dev_warn(dev,
+ "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+ data->info_crc, info_crc);
}
ret = mxt_upload_cfg_mem(data, &cfg);
--
2.17.1
next prev parent reply other threads:[~2020-02-12 8:46 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 8:41 [PATCH v7 00/48] atmel_mxt_ts misc Jiada Wang
2020-02-12 8:41 ` [PATCH v7 01/48] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-02-12 8:41 ` [PATCH v7 02/48] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-02-12 8:41 ` [PATCH v7 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-17 22:44 ` Dmitry Osipenko
2020-03-18 13:02 ` Wang, Jiada
2020-02-12 8:41 ` [PATCH v7 04/48] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-02-12 8:41 ` [PATCH v7 05/48] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-02-12 8:41 ` [PATCH v7 06/48] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-02-12 8:41 ` [PATCH v7 07/48] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-02-12 8:41 ` [PATCH v7 08/48] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-02-12 8:41 ` [PATCH v7 09/48] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-02-12 8:41 ` [PATCH v7 10/48] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-02-12 8:41 ` [PATCH v7 11/48] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-02-12 8:41 ` [PATCH v7 12/48] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-02-12 8:41 ` [PATCH v7 13/48] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-12 15:26 ` Dmitry Osipenko
2020-02-12 8:41 ` [PATCH v7 14/48] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-02-12 8:41 ` [PATCH v7 15/48] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-02-12 8:41 ` [PATCH v7 16/48] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-02-12 8:41 ` [PATCH v7 17/48] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-02-12 8:41 ` [PATCH v7 18/48] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-02-12 8:41 ` [PATCH v7 19/48] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-02-12 8:41 ` [PATCH v7 20/48] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-02-12 8:41 ` [PATCH v7 21/48] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-02-12 8:41 ` [PATCH v7 22/48] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-12 15:28 ` Dmitry Osipenko
2020-02-12 8:41 ` [PATCH v7 23/48] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-02-12 8:41 ` [PATCH v7 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-02-12 8:41 ` [PATCH v7 25/48] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-02-12 8:41 ` [PATCH v7 26/48] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-02-12 8:41 ` [PATCH v7 27/48] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-02-12 8:41 ` [PATCH v7 28/48] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-02-12 8:41 ` [PATCH v7 29/48] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-02-12 8:42 ` [PATCH v7 30/48] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-02-12 8:42 ` [PATCH v7 31/48] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-02-12 8:42 ` Jiada Wang [this message]
2020-02-12 8:42 ` [PATCH v7 33/48] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-02-12 8:42 ` [PATCH v7 34/48] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-02-12 8:42 ` [PATCH v7 35/48] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-02-12 8:42 ` [PATCH v7 36/48] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-02-12 8:42 ` [PATCH v7 37/48] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-02-12 8:42 ` [PATCH v7 38/48] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-02-12 8:42 ` [PATCH v7 39/48] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-02-12 8:42 ` [PATCH v7 40/48] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-02-12 8:42 ` [PATCH v7 41/48] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-02-12 8:42 ` [PATCH v7 42/48] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-02-12 8:42 ` [PATCH v7 43/48] Input: Atmel: use T44 object to process " Jiada Wang
2020-02-12 8:42 ` [PATCH v7 44/48] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-02-12 8:42 ` [PATCH v7 45/48] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-02-12 8:42 ` [PATCH v7 46/48] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-02-12 8:42 ` [PATCH v7 47/48] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-02-12 8:42 ` [PATCH v7 48/48] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
2020-03-11 1:09 ` [PATCH v7 00/48] atmel_mxt_ts misc Wang, Jiada
2020-03-12 15:21 ` Dmitry Osipenko
2020-03-16 6:50 ` Wang, Jiada
2020-03-20 3:37 ` Wang, Jiada
2020-03-20 15:53 ` Dmitry Osipenko
2020-03-23 2:25 ` Wang, Jiada
2020-03-24 14:54 ` Dmitry Osipenko
2020-03-24 15:03 ` Dmitry Osipenko
2020-03-25 12:13 ` Wang, Jiada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200212084218.32344-33-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).