From: Douglas Anderson <dianders@chromium.org>
To: jkosina@suse.cz, benjamin.tissoires@redhat.com,
gregkh@linuxfoundation.org,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: andrea@borgia.bo.it, robh+dt@kernel.org,
kai.heng.feng@canonical.com, swboyd@chromium.org,
linux-input@vger.kernel.org, hdegoede@redhat.com,
Douglas Anderson <dianders@chromium.org>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 3/4] dt-bindings: input: HID: i2c-hid: Introduce bindings for the Goodix GT7375P
Date: Wed, 11 Nov 2020 16:41:29 -0800 [thread overview]
Message-ID: <20201111164027.v6.3.Ibb28033c81d87fcc13a6ba28c6ea7ac154d65f93@changeid> (raw)
In-Reply-To: <20201112004130.17290-1-dianders@chromium.org>
This adds new bindings for the Goodix GT7375P touchscreen. While this
touchscreen's communications are based on the generic "i2c-over-hid"
protocol, it needs special power sequencing and thus gets its own
compatible and bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
(no changes since v5)
Changes in v5:
- Added mention of i2c-hid in the yaml itself as per Rob.
- Adjusted subject as per Rob.
Changes in v3:
- Fixed compatible in example.
- Removed Benjamin as a maintainer.
- Updated description.
Changes in v2:
- ("dt-bindings: HID: i2c-hid: Introduce bindings for the Goodix GT7375P") new in v2.
.../bindings/input/goodix,gt7375p.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
new file mode 100644
index 000000000000..fe1c5016f7f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7375P touchscreen
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description:
+ Supports the Goodix GT7375P touchscreen.
+ This touchscreen uses the i2c-hid protocol but has some non-standard
+ power sequencing required.
+
+properties:
+ compatible:
+ items:
+ - const: goodix,gt7375p
+
+ reg:
+ enum:
+ - 0x5d
+ - 0x14
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ true
+
+ vdd-supply:
+ description: The 3.3V supply to the touchscreen.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&pp3300_ts>;
+ };
+ };
--
2.29.2.222.g5d2a92d10f8-goog
next prev parent reply other threads:[~2020-11-12 1:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-12 0:41 [PATCH v6 0/4] HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p Douglas Anderson
2020-11-12 0:41 ` [PATCH v6 1/4] HID: i2c-hid: Reorganize so ACPI and OF are separate modules Douglas Anderson
2020-11-12 0:41 ` [PATCH v6 2/4] arm64: defconfig: Update config names for i2c-hid rejigger Douglas Anderson
2020-11-12 0:41 ` Douglas Anderson [this message]
2020-11-12 0:41 ` [PATCH v6 4/4] HID: i2c-hid: Introduce goodix-i2c-hid using i2c-hid core Douglas Anderson
2020-12-01 21:12 ` [PATCH v6 0/4] HID: i2c-hid: Reorganize to allow supporting goodix,gt7375p Doug Anderson
2020-12-02 15:19 ` Benjamin Tissoires
2020-12-02 15:54 ` Doug Anderson
2020-12-08 16:00 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201111164027.v6.3.Ibb28033c81d87fcc13a6ba28c6ea7ac154d65f93@changeid \
--to=dianders@chromium.org \
--cc=andrea@borgia.bo.it \
--cc=benjamin.tissoires@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=jkosina@suse.cz \
--cc=kai.heng.feng@canonical.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).