From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
Nicolas Boichat <drinkcat@chromium.org>,
cui.zhang@mediatek.com, eizan@chromium.org,
srv_heupstream@mediatek.com, chao.hao@mediatek.com,
Will Deacon <will.deacon@arm.com>,
linux-kernel@vger.kernel.org, Evan Green <evgreen@chromium.org>,
Tomasz Figa <tfiga@google.com>,
iommu@lists.linux-foundation.org,
Matthias Kaehlcke <mka@chromium.org>,
linux-mediatek@lists.infradead.org, ming-fan.chen@mediatek.com,
anan.sun@mediatek.com, Robin Murphy <robin.murphy@arm.com>,
acourbot@chromium.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 02/17] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW
Date: Sat, 30 May 2020 16:10:03 +0800 [thread overview]
Message-ID: <1590826218-23653-3-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>
After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.
And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
.../devicetree/bindings/display/mediatek/mediatek,disp.txt | 9 ---------
.../devicetree/bindings/media/mediatek-jpeg-decoder.txt | 4 ----
Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 4 ----
4 files changed, 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709..c7e2eb8 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -60,8 +60,6 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
the supported chips are mt2701 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -82,7 +80,6 @@ ovl0: ovl@1400c000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
};
ovl1: ovl@1400d000 {
@@ -92,7 +89,6 @@ ovl1: ovl@1400d000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
};
rdma0: rdma@1400e000 {
@@ -102,7 +98,6 @@ rdma0: rdma@1400e000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
};
rdma1: rdma@1400f000 {
@@ -112,7 +107,6 @@ rdma1: rdma@1400f000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
};
rdma2: rdma@14010000 {
@@ -122,7 +116,6 @@ rdma2: rdma@14010000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
};
wdma0: wdma@14011000 {
@@ -132,7 +125,6 @@ wdma0: wdma@14011000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
};
wdma1: wdma@14012000 {
@@ -142,7 +134,6 @@ wdma1: wdma@14012000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
};
color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
index 044b119..7978f21 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -15,9 +15,6 @@ Required properties:
- clock-names: must contain "jpgdec-smi" and "jpgdec".
- power-domains: a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
@@ -32,7 +29,6 @@ Example:
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index 0d03e3a..df69c5a 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- for details.
Example:
mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
};
@@ -51,7 +47,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};
mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};
mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};
mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 1023740..50a27f2 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -12,7 +12,6 @@ Required properties:
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
- clock-names:
@@ -45,7 +44,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x16027800 0 0x800>, /*VP8_VL*/
<0 0x16028400 0 0x400>; /*VP9_VD*/
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -98,7 +96,6 @@ vcodec_enc: vcodec@18002000 {
<&iommu M4U_PORT_VENC_REF_CHROMA>,
<&iommu M4U_PORT_VENC_NBM_RDMA>,
<&iommu M4U_PORT_VENC_NBM_WDMA>;
- mediatek,larb = <&larb3>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_SEL>;
clock-names = "venc_sel";
@@ -119,7 +116,6 @@ vcodec_enc_lt: vcodec@19002000 {
<&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
<&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
<&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
- mediatek,larb = <&larb5>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "venc_lt_sel";
--
1.9.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2020-05-30 8:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-30 8:10 [PATCH v4 00/17] Clean up "mediatek,larb" after adding device_link Yong Wu
2020-05-30 8:10 ` [PATCH v4 01/17] media: dt-binding: mtk-vcodec: Separating mtk-vcodec encode node Yong Wu
2020-06-09 21:21 ` Rob Herring
2020-06-10 6:46 ` Alexandre Courbot
2020-06-10 7:38 ` Tiffany Lin
2020-06-17 5:53 ` Tiffany Lin
2020-05-30 8:10 ` Yong Wu [this message]
2020-05-30 8:10 ` [PATCH v4 03/17] iommu/mediatek: Add probe_defer for smi-larb Yong Wu
2020-05-30 8:10 ` [PATCH v4 04/17] iommu/mediatek: Add device_link between the consumer and the larb devices Yong Wu
2020-05-30 8:10 ` [PATCH v4 05/17] memory: mtk-smi: Add device-link between smi-larb and smi-common Yong Wu
2020-05-30 8:10 ` [PATCH v4 06/17] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put Yong Wu
2020-06-18 9:32 ` Yong Wu
2020-06-18 17:28 ` Rick Chang
2020-05-30 8:10 ` [PATCH v4 07/17] media: mtk-mdp: " Yong Wu
2020-08-14 9:25 ` houlong wei
2020-05-30 8:10 ` [PATCH v4 08/17] media: mtk-vcodec: separate mtk-vcodec-enc node Yong Wu
2020-06-10 5:45 ` CK Hu
2020-06-10 6:13 ` Tiffany Lin
2020-05-30 8:10 ` [PATCH v4 09/17] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put Yong Wu
2020-06-10 5:47 ` CK Hu
2020-06-10 6:20 ` Tiffany Lin
2020-05-30 8:10 ` [PATCH v4 10/17] drm/mediatek: Add pm runtime support for ovl and rdma Yong Wu
2020-05-30 11:07 ` Chun-Kuang Hu
2020-05-30 8:10 ` [PATCH v4 11/17] drm/mediatek: Get rid of mtk_smi_larb_get/put Yong Wu
2020-05-30 11:08 ` Chun-Kuang Hu
2020-05-30 8:10 ` [PATCH v4 12/17] memory: mtk-smi: " Yong Wu
2020-05-30 8:10 ` [PATCH v4 13/17] iommu/mediatek: Use module_platform_driver Yong Wu
2020-05-30 8:10 ` [PATCH v4 14/17] memory: mtk-smi: Use device_is_bound to check if smi-common is ready Yong Wu
2020-05-30 8:10 ` [PATCH v4 15/17] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes Yong Wu
2020-05-30 8:10 ` [PATCH v4 16/17] arm64: dts: mt8173: Separate mtk-vcodec-enc node Yong Wu
2020-05-30 8:10 ` [PATCH v4 17/17] arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590826218-23653-3-git-send-email-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=acourbot@chromium.org \
--cc=anan.sun@mediatek.com \
--cc=chao.hao@mediatek.com \
--cc=cui.zhang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=eizan@chromium.org \
--cc=evgreen@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@google.com \
--cc=will.deacon@arm.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).