[PATCH v4 04/17] iommu/mediatek: Add device_link between the consumer and the larb devices

From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Joerg Roedel <joro@8bytes.org>,  Rob Herring <robh+dt@kernel.org>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
	Nicolas Boichat <drinkcat@chromium.org>,
	cui.zhang@mediatek.com, eizan@chromium.org,
	srv_heupstream@mediatek.com, chao.hao@mediatek.com,
	Will Deacon <will.deacon@arm.com>,
	linux-kernel@vger.kernel.org, Evan Green <evgreen@chromium.org>,
	Tomasz Figa <tfiga@google.com>,
	iommu@lists.linux-foundation.org,
	Matthias Kaehlcke <mka@chromium.org>,
	linux-mediatek@lists.infradead.org, ming-fan.chen@mediatek.com,
	anan.sun@mediatek.com, Robin Murphy <robin.murphy@arm.com>,
	acourbot@chromium.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 04/17] iommu/mediatek: Add device_link between the consumer and the larb devices
Date: Sat, 30 May 2020 16:10:05 +0800	[thread overview]
Message-ID: <1590826218-23653-5-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1590826218-23653-1-git-send-email-yong.wu@mediatek.com>

MediaTek IOMMU don't have its power-domain. all the consumer connect
with smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] http://lists.infradead.org/pipermail/linux-mediatek/2019-July/
021500.html
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c    | 18 ++++++++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7d8f3d0..5c3a6ba 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -445,22 +445,40 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return ERR_PTR(-ENODEV); /* Not a iommu client device */
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
 	return &data->iommu;
 }
 
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 02858a0..26b6c79 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -422,7 +422,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 	struct of_phandle_args iommu_spec;
 	struct of_phandle_iterator it;
 	struct mtk_iommu_data *data;
-	int err;
+	struct device_link *link;
+	struct device *larbdev;
+	int err, larbid;
 
 	of_for_each_phandle(&it, err, dev->of_node, "iommus",
 			"#iommu-cells", -1) {
@@ -444,6 +446,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
 
 	data = dev_iommu_priv_get(dev);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return &data->iommu;
 }
 
@@ -465,10 +475,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
 static void mtk_iommu_release_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct mtk_iommu_data *data;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return;
 
+	data = dev_iommu_priv_get(dev);
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->larb_imu[larbid].dev;
+	device_link_remove(dev, larbdev);
+
 	iommu_fwspec_free(dev);
 }
 
-- 
1.9.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
