[PATCH v7 2/7] iommu/uapi: Add argsz for user filled data

From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	Alex Williamson <alex.williamson@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>, Jonathan Corbet <corbet@lwn.net>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Christoph Hellwig <hch@infradead.org>,
	David Woodhouse <dwmw2@infradead.org>
Subject: [PATCH v7 2/7] iommu/uapi: Add argsz for user filled data
Date: Wed, 29 Jul 2020 17:21:02 -0700	[thread overview]
Message-ID: <1596068467-49322-3-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1596068467-49322-1-git-send-email-jacob.jun.pan@linux.intel.com>

As IOMMU UAPI gets extended, user data size may increase. To support
backward compatibiliy, this patch introduces a size field to each UAPI
data structures. It is *always* the responsibility for the user to fill in
the correct size. Padding fields are adjusted to ensure 8 byte alignment.

Specific scenarios for user data handling are documented in:
Documentation/userspace-api/iommu.rst

Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 include/uapi/linux/iommu.h | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index e907b7091a46..d5e9014f690e 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -135,6 +135,7 @@ enum iommu_page_response_code {
 
 /**
  * struct iommu_page_response - Generic page response information
+ * @argsz: User filled size of this data
  * @version: API version of this structure
  * @flags: encodes whether the corresponding fields are valid
  *         (IOMMU_FAULT_PAGE_RESPONSE_* values)
@@ -143,6 +144,7 @@ enum iommu_page_response_code {
  * @code: response code from &enum iommu_page_response_code
  */
 struct iommu_page_response {
+	__u32	argsz;
 #define IOMMU_PAGE_RESP_VERSION_1	1
 	__u32	version;
 #define IOMMU_PAGE_RESP_PASID_VALID	(1 << 0)
@@ -218,6 +220,7 @@ struct iommu_inv_pasid_info {
 /**
  * struct iommu_cache_invalidate_info - First level/stage invalidation
  *     information
+ * @argsz: User filled size of this data
  * @version: API version of this structure
  * @cache: bitfield that allows to select which caches to invalidate
  * @granularity: defines the lowest granularity used for the invalidation:
@@ -246,6 +249,7 @@ struct iommu_inv_pasid_info {
  * must support the used granularity.
  */
 struct iommu_cache_invalidate_info {
+	__u32	argsz;
 #define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1
 	__u32	version;
 /* IOMMU paging structure cache */
@@ -255,7 +259,7 @@ struct iommu_cache_invalidate_info {
 #define IOMMU_CACHE_INV_TYPE_NR		(3)
 	__u8	cache;
 	__u8	granularity;
-	__u8	padding[2];
+	__u8	padding[6];
 	union {
 		struct iommu_inv_pasid_info pasid_info;
 		struct iommu_inv_addr_info addr_info;
@@ -292,6 +296,7 @@ struct iommu_gpasid_bind_data_vtd {
 
 /**
  * struct iommu_gpasid_bind_data - Information about device and guest PASID binding
+ * @argsz:	User filled size of this data
  * @version:	Version of this data structure
  * @format:	PASID table entry format
  * @flags:	Additional information on guest bind request
@@ -309,17 +314,18 @@ struct iommu_gpasid_bind_data_vtd {
  * PASID to host PASID based on this bind data.
  */
 struct iommu_gpasid_bind_data {
+	__u32 argsz;
 #define IOMMU_GPASID_BIND_VERSION_1	1
 	__u32 version;
 #define IOMMU_PASID_FORMAT_INTEL_VTD	1
 	__u32 format;
+	__u32 addr_width;
 #define IOMMU_SVA_GPASID_VAL	(1 << 0) /* guest PASID valid */
 	__u64 flags;
 	__u64 gpgd;
 	__u64 hpasid;
 	__u64 gpasid;
-	__u32 addr_width;
-	__u8  padding[12];
+	__u8  padding[8];
 	/* Vendor specific data */
 	union {
 		struct iommu_gpasid_bind_data_vtd vtd;
-- 
2.7.4

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
