iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Auger Eric <eric.auger@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>, Jonathan Corbet <corbet@lwn.net>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Christoph Hellwig <hch@infradead.org>,
	iommu@lists.linux-foundation.org,
	David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v7 2/7] iommu/uapi: Add argsz for user filled data
Date: Mon, 17 Aug 2020 15:48:25 -0700	[thread overview]
Message-ID: <20200817154825.3f27190f@jacob-builder> (raw)
In-Reply-To: <1ac39547-143b-2a2e-e142-92be023ef8d7@redhat.com>

On Wed, 12 Aug 2020 18:59:14 +0200
Auger Eric <eric.auger@redhat.com> wrote:

> Hi,
> 
> On 7/30/20 2:21 AM, Jacob Pan wrote:
> > As IOMMU UAPI gets extended, user data size may increase. To support
> > backward compatibiliy, this patch introduces a size field to each
> > UAPI  
> s/compatibiliy/compatibility
will fix

> > data structures. It is *always* the responsibility for the user to
> > fill in the correct size. Padding fields are adjusted to ensure 8
> > byte alignment.
> > 
> > Specific scenarios for user data handling are documented in:
> > Documentation/userspace-api/iommu.rst  
> 
> you may mention the struct version does not need to be incremented as
> no IOCTL uses the structs yet.
Yes, good point. I also mentioned in the doc that:

"Version field is only reserved for the unlikely event of UAPI upgrade
at its entirety."

> > 
> > Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > ---
> >  include/uapi/linux/iommu.h | 12 +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> > 
> > diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> > index e907b7091a46..d5e9014f690e 100644
> > --- a/include/uapi/linux/iommu.h
> > +++ b/include/uapi/linux/iommu.h
> > @@ -135,6 +135,7 @@ enum iommu_page_response_code {
> >  
> >  /**
> >   * struct iommu_page_response - Generic page response information
> > + * @argsz: User filled size of this data
> >   * @version: API version of this structure
> >   * @flags: encodes whether the corresponding fields are valid
> >   *         (IOMMU_FAULT_PAGE_RESPONSE_* values)
> > @@ -143,6 +144,7 @@ enum iommu_page_response_code {
> >   * @code: response code from &enum iommu_page_response_code
> >   */
> >  struct iommu_page_response {
> > +	__u32	argsz;
> >  #define IOMMU_PAGE_RESP_VERSION_1	1
> >  	__u32	version;
> >  #define IOMMU_PAGE_RESP_PASID_VALID	(1 << 0)
> > @@ -218,6 +220,7 @@ struct iommu_inv_pasid_info {
> >  /**
> >   * struct iommu_cache_invalidate_info - First level/stage
> > invalidation
> >   *     information
> > + * @argsz: User filled size of this data
> >   * @version: API version of this structure
> >   * @cache: bitfield that allows to select which caches to
> > invalidate
> >   * @granularity: defines the lowest granularity used for the
> > invalidation: @@ -246,6 +249,7 @@ struct iommu_inv_pasid_info {
> >   * must support the used granularity.
> >   */
> >  struct iommu_cache_invalidate_info {
> > +	__u32	argsz;
> >  #define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1
> >  	__u32	version;
> >  /* IOMMU paging structure cache */
> > @@ -255,7 +259,7 @@ struct iommu_cache_invalidate_info {
> >  #define IOMMU_CACHE_INV_TYPE_NR		(3)
> >  	__u8	cache;
> >  	__u8	granularity;
> > -	__u8	padding[2];
> > +	__u8	padding[6];
> >  	union {
> >  		struct iommu_inv_pasid_info pasid_info;
> >  		struct iommu_inv_addr_info addr_info;
> > @@ -292,6 +296,7 @@ struct iommu_gpasid_bind_data_vtd {
> >  
> >  /**
> >   * struct iommu_gpasid_bind_data - Information about device and
> > guest PASID binding
> > + * @argsz:	User filled size of this data
> >   * @version:	Version of this data structure
> >   * @format:	PASID table entry format
> >   * @flags:	Additional information on guest bind request
> > @@ -309,17 +314,18 @@ struct iommu_gpasid_bind_data_vtd {
> >   * PASID to host PASID based on this bind data.
> >   */
> >  struct iommu_gpasid_bind_data {
> > +	__u32 argsz;
> >  #define IOMMU_GPASID_BIND_VERSION_1	1
> >  	__u32 version;
> >  #define IOMMU_PASID_FORMAT_INTEL_VTD	1
> >  	__u32 format;
> > +	__u32 addr_width;
> >  #define IOMMU_SVA_GPASID_VAL	(1 << 0) /* guest PASID valid
> > */ __u64 flags;
> >  	__u64 gpgd;
> >  	__u64 hpasid;
> >  	__u64 gpasid;
> > -	__u32 addr_width;
> > -	__u8  padding[12];
> > +	__u8  padding[8];
> >  	/* Vendor specific data */
> >  	union {
> >  		struct iommu_gpasid_bind_data_vtd vtd;
> >   
> Reviewed-by: Eric Auger <eric.auger@redhat.com>
> 
> Thanks
> 
> Eric
> 

[Jacob Pan]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-08-17 22:41 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30  0:21 [PATCH v7 0/7] IOMMU user API enhancement Jacob Pan
2020-07-30  0:21 ` [PATCH v7 1/7] docs: IOMMU user API Jacob Pan
2020-08-12 16:38   ` Auger Eric
2020-08-17 22:07     ` Jacob Pan
2020-07-30  0:21 ` [PATCH v7 2/7] iommu/uapi: Add argsz for user filled data Jacob Pan
2020-08-12 16:59   ` Auger Eric
2020-08-17 22:48     ` Jacob Pan [this message]
2020-07-30  0:21 ` [PATCH v7 3/7] iommu/uapi: Introduce enum type for PASID data format Jacob Pan
2020-08-13  9:29   ` Auger Eric
2020-07-30  0:21 ` [PATCH v7 4/7] iommu/uapi: Use named union for user data Jacob Pan
2020-07-30  0:21 ` [PATCH v7 5/7] iommu/uapi: Rename uapi functions Jacob Pan
2020-08-13  8:58   ` Auger Eric
2020-08-17 23:16     ` Jacob Pan
2020-07-30  0:21 ` [PATCH v7 6/7] iommu/uapi: Handle data and argsz filled by users Jacob Pan
2020-08-13  9:11   ` Auger Eric
2020-08-13  9:25     ` Liu, Yi L
2020-08-13  9:30       ` Auger Eric
2020-08-13  9:38         ` Liu, Yi L
2020-08-13 10:03           ` Auger Eric
2020-07-30  0:21 ` [PATCH v7 7/7] iommu/vt-d: Check UAPI data processed by IOMMU core Jacob Pan
2020-08-13  9:19   ` Auger Eric
2020-08-31 17:52     ` Jacob Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200817154825.3f27190f@jacob-builder \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=corbet@lwn.net \
    --cc=dwmw2@infradead.org \
    --cc=eric.auger@redhat.com \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.com \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).