Re: [PATCH v9 00/10] iommu: I/O page faults for SMMUv3

From: Zhangfei Gao <zhangfei.gao@linaro.org>
To: Jean-Philippe Brucker <jean-philippe@linaro.org>,
	joro@8bytes.org, will@kernel.org
Cc: devicetree@vger.kernel.org, linux-acpi@vger.kernel.org,
	guohanjun@huawei.com, rjw@rjwysocki.net,
	iommu@lists.linux-foundation.org, robh+dt@kernel.org,
	linux-accelerators@lists.ozlabs.org, sudeep.holla@arm.com,
	vivek.gautam@arm.com, robin.murphy@arm.com,
	linux-arm-kernel@lists.infradead.org, lenb@kernel.org
Subject: Re: [PATCH v9 00/10] iommu: I/O page faults for SMMUv3
Date: Mon, 11 Jan 2021 11:26:16 +0800	[thread overview]
Message-ID: <d8e4c6f7-f194-3374-b6d6-6ea3006b57f5@linaro.org> (raw)
In-Reply-To: <20210108145217.2254447-1-jean-philippe@linaro.org>

On 2021/1/8 下午10:52, Jean-Philippe Brucker wrote:
> Add stall support to the SMMUv3, along with a common I/O Page Fault
> handler.
>
> Changes since v8 [1]:
> * Added patches 1 and 2 which aren't strictly related to IOPF but need to
>    be applied in order - 8 depends on 2 which depends on 1. Patch 2 moves
>    pasid-num-bits to a device property, following Robin's comment on v8.
> * Patches 3-5 extract the IOPF feature from the SVA one, to support SVA
>    implementations that handle I/O page faults through the device driver
>    rather than the IOMMU driver [2]
> * Use device properties for dma-can-stall, instead of a special fwspec
>    member.
> * Dropped PRI support for now, since it doesn't seem to be available in
>    hardware and adds some complexity.
> * Had to drop some Acks and Tested tags unfortunately, due to code
>    changes.
>
> As usual, you can get the latest SVA patches from
> http://jpbrucker.net/git/linux sva/current
>
> [1] https://lore.kernel.org/linux-iommu/20201112125519.3987595-1-jean-philippe@linaro.org/
> [2] https://lore.kernel.org/linux-iommu/BY5PR12MB3764F5D07E8EC48327E39C86B3C60@BY5PR12MB3764.namprd12.prod.outlook.com/
>
> Jean-Philippe Brucker (10):
>    iommu: Remove obsolete comment
>    iommu/arm-smmu-v3: Use device properties for pasid-num-bits
>    iommu: Separate IOMMU_DEV_FEAT_IOPF from IOMMU_DEV_FEAT_SVA
>    iommu/vt-d: Support IOMMU_DEV_FEAT_IOPF
>    uacce: Enable IOMMU_DEV_FEAT_IOPF
>    iommu: Add a page fault handler
>    iommu/arm-smmu-v3: Maintain a SID->device structure
>    dt-bindings: document stall property for IOMMU masters
>    ACPI/IORT: Enable stall support for platform devices
>    iommu/arm-smmu-v3: Add stall support for platform devices

Thanks Jean
I have tested on Hisilicon Kunpeng920 board.

  Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>

Thanks
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu