* [PATCH v1] dt-bindings: input: convert drv266x to json-schema
@ 2023-12-21 18:31 Anshul Dalal
2023-12-21 20:32 ` Krzysztof Kozlowski
2023-12-23 7:24 ` Dmitry Torokhov
0 siblings, 2 replies; 5+ messages in thread
From: Anshul Dalal @ 2023-12-21 18:31 UTC (permalink / raw)
To: linux-kernel, linux-input, devicetree
Cc: Anshul Dalal, Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-kernel-mentees
Convert devicetree binding documentation for ti drv2665 and drv2667
haptics driver to json-schema. The previously two separate bindings have
been merged into a single drv266x.yaml.
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
---
.../devicetree/bindings/input/ti,drv2665.txt | 17 -------
.../devicetree/bindings/input/ti,drv2667.txt | 17 -------
.../devicetree/bindings/input/ti,drv266x.yaml | 50 +++++++++++++++++++
3 files changed, 50 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2665.txt
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
create mode 100644 Documentation/devicetree/bindings/input/ti,drv266x.yaml
diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt
deleted file mode 100644
index 1ba97ac04305..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv2665.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2665 Haptics driver
-
-Required properties:
- - compatible - "ti,drv2665" - DRV2665
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
- compatible = "ti,drv2665";
- reg = <0x59>;
- vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2665
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
deleted file mode 100644
index 996382cf994a..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv2667.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2667 Haptics driver
-
-Required properties:
- - compatible - "ti,drv2667" - DRV2667
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
- compatible = "ti,drv2667";
- reg = <0x59>;
- vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2667
diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
new file mode 100644
index 000000000000..da1818824373
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv266x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv266x Haptics driver
+
+description: |
+ Product Page:
+ http://www.ti.com/product/drv2665
+ http://www.ti.com/product/drv2667
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,drv2665
+ - ti,drv2667
+
+ reg:
+ maxItems: 1
+
+ vbat-supply:
+ description: Required supply regulator
+
+required:
+ - compatible
+ - reg
+ - vbat-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptics@59 {
+ compatible = "ti,drv2667";
+ reg = <0x59>;
+ vbat-supply = <&vbat>;
+ };
+ };
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1] dt-bindings: input: convert drv266x to json-schema
2023-12-21 18:31 [PATCH v1] dt-bindings: input: convert drv266x to json-schema Anshul Dalal
@ 2023-12-21 20:32 ` Krzysztof Kozlowski
2023-12-23 7:24 ` Dmitry Torokhov
1 sibling, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-21 20:32 UTC (permalink / raw)
To: Anshul Dalal, linux-kernel, linux-input, devicetree
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-kernel-mentees
On 21/12/2023 19:31, Anshul Dalal wrote:
> Convert devicetree binding documentation for ti drv2665 and drv2667
> haptics driver to json-schema. The previously two separate bindings have
> been merged into a single drv266x.yaml.
>
> Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] dt-bindings: input: convert drv266x to json-schema
2023-12-21 18:31 [PATCH v1] dt-bindings: input: convert drv266x to json-schema Anshul Dalal
2023-12-21 20:32 ` Krzysztof Kozlowski
@ 2023-12-23 7:24 ` Dmitry Torokhov
1 sibling, 0 replies; 5+ messages in thread
From: Dmitry Torokhov @ 2023-12-23 7:24 UTC (permalink / raw)
To: Anshul Dalal
Cc: linux-kernel, linux-input, devicetree, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-kernel-mentees
On Fri, Dec 22, 2023 at 12:01:08AM +0530, Anshul Dalal wrote:
> Convert devicetree binding documentation for ti drv2665 and drv2667
> haptics driver to json-schema. The previously two separate bindings have
> been merged into a single drv266x.yaml.
>
> Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Applied, thank you.
--
Dmitry
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1] dt-bindings: input: convert drv266x to json-schema
2023-12-21 18:14 Anshul Dalal
@ 2023-12-21 19:06 ` Anshul Dalal
0 siblings, 0 replies; 5+ messages in thread
From: Anshul Dalal @ 2023-12-21 19:06 UTC (permalink / raw)
To: linux-kernel, linux-iio, devicetree
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-kernel-mentees
I mistakenly submitted this patch to the iio subsystem and CC'd the no
longer valid e-mail of Dan Murphy.
Kindly refer to the patch below for further discussions:
https://lore.kernel.org/lkml/20231221183109.684325-1-anshulusr@gmail.com/
Apologies for any inconvenience,
Anshul
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v1] dt-bindings: input: convert drv266x to json-schema
@ 2023-12-21 18:14 Anshul Dalal
2023-12-21 19:06 ` Anshul Dalal
0 siblings, 1 reply; 5+ messages in thread
From: Anshul Dalal @ 2023-12-21 18:14 UTC (permalink / raw)
To: linux-kernel, linux-iio, devicetree
Cc: Anshul Dalal, Dan Murphy, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-kernel-mentees
Convert devicetree binding documentation for ti drv2665 and drv2667
haptics driver to json-schema. The previously two separate bindings have
been merged into a single drv266x.yaml.
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
---
.../devicetree/bindings/input/ti,drv2665.txt | 17 -------
.../devicetree/bindings/input/ti,drv2667.txt | 17 -------
.../devicetree/bindings/input/ti,drv266x.yaml | 50 +++++++++++++++++++
3 files changed, 50 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2665.txt
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
create mode 100644 Documentation/devicetree/bindings/input/ti,drv266x.yaml
diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt
deleted file mode 100644
index 1ba97ac04305..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv2665.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2665 Haptics driver
-
-Required properties:
- - compatible - "ti,drv2665" - DRV2665
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
- compatible = "ti,drv2665";
- reg = <0x59>;
- vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2665
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
deleted file mode 100644
index 996382cf994a..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv2667.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2667 Haptics driver
-
-Required properties:
- - compatible - "ti,drv2667" - DRV2667
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
- compatible = "ti,drv2667";
- reg = <0x59>;
- vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2667
diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
new file mode 100644
index 000000000000..da1818824373
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv266x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv266x Haptics driver
+
+description: |
+ Product Page:
+ http://www.ti.com/product/drv2665
+ http://www.ti.com/product/drv2667
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,drv2665
+ - ti,drv2667
+
+ reg:
+ maxItems: 1
+
+ vbat-supply:
+ description: Required supply regulator
+
+required:
+ - compatible
+ - reg
+ - vbat-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptics@59 {
+ compatible = "ti,drv2667";
+ reg = <0x59>;
+ vbat-supply = <&vbat>;
+ };
+ };
--
2.43.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-12-23 7:24 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-21 18:31 [PATCH v1] dt-bindings: input: convert drv266x to json-schema Anshul Dalal
2023-12-21 20:32 ` Krzysztof Kozlowski
2023-12-23 7:24 ` Dmitry Torokhov
-- strict thread matches above, loose matches on Subject: below --
2023-12-21 18:14 Anshul Dalal
2023-12-21 19:06 ` Anshul Dalal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).