* [experimental:tvp5150-5 135/138] drivers/media/i2c/tvp5150.c:1018:10: error: implicit declaration of function 'v4l2_subdev_get_try_crop'; did you mean 'v4l2_subdev_has_op'?
@ 2018-09-18 15:18 kbuild test robot
0 siblings, 0 replies; only message in thread
From: kbuild test robot @ 2018-09-18 15:18 UTC (permalink / raw)
To: Marco Felsch; +Cc: kbuild-all, Mauro Carvalho Chehab, linux-media
[-- Attachment #1: Type: text/plain, Size: 4612 bytes --]
tree: git://linuxtv.org/mchehab/experimental tvp5150-5
head: c223c451df23ac71a844d05aab65ede057b70eb0
commit: bc93ce496fa909d8fa9496c93d36e9ea413a9065 [135/138] tvp5150: add FORMAT_TRY support for get/set selection handlers
config: x86_64-randconfig-s5-09181631 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
git checkout bc93ce496fa909d8fa9496c93d36e9ea413a9065
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
drivers/media/i2c/tvp5150.c:72:32: error: 'TVP5150_NUM_PADS' undeclared here (not in a function); did you mean 'TVP5150_H_MAX'?
struct device_node *endpoints[TVP5150_NUM_PADS + 1];
^~~~~~~~~~~~~~~~
TVP5150_H_MAX
drivers/media/i2c/tvp5150.c: In function '__tvp5150_get_pad_crop':
>> drivers/media/i2c/tvp5150.c:1018:10: error: implicit declaration of function 'v4l2_subdev_get_try_crop'; did you mean 'v4l2_subdev_has_op'? [-Werror=implicit-function-declaration]
return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
^~~~~~~~~~~~~~~~~~~~~~~~
v4l2_subdev_has_op
drivers/media/i2c/tvp5150.c:1018:10: warning: return makes pointer from integer without a cast [-Wint-conversion]
return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/i2c/tvp5150.c: In function 'tvp5150_fill_fmt':
drivers/media/i2c/tvp5150.c:1034:33: error: 'TVP5150_PAD_VID_OUT' undeclared (first use in this function); did you mean 'TVP5150_SVIDEO'?
if (!format || (format->pad != TVP5150_PAD_VID_OUT))
^~~~~~~~~~~~~~~~~~~
TVP5150_SVIDEO
drivers/media/i2c/tvp5150.c:1034:33: note: each undeclared identifier is reported only once for each function it appears in
drivers/media/i2c/tvp5150.c: In function 'tvp5150_mc_init':
drivers/media/i2c/tvp5150.c:1881:9: error: 'ret' undeclared (first use in this function); did you mean 'net'?
return ret;
^~~
net
drivers/media/i2c/tvp5150.c:1880:1: warning: label 'out' defined but not used [-Wunused-label]
out:
^~~
drivers/media/i2c/tvp5150.c: In function 'tvp5150_of_valid_input':
drivers/media/i2c/tvp5150.c:1893:7: error: 'TVP5150_PAD_AIP1A' undeclared (first use in this function); did you mean 'TVP5150_VDPOE'?
case TVP5150_PAD_AIP1A:
^~~~~~~~~~~~~~~~~
TVP5150_VDPOE
drivers/media/i2c/tvp5150.c:1901:7: error: 'TVP5150_PAD_AIP1B' undeclared (first use in this function); did you mean 'TVP5150_PAD_AIP1A'?
case TVP5150_PAD_AIP1B:
^~~~~~~~~~~~~~~~~
TVP5150_PAD_AIP1A
drivers/media/i2c/tvp5150.c: In function 'tvp5150_parse_dt':
drivers/media/i2c/tvp5150.c:1945:8: error: 'TVP5150_PAD_AIP1A' undeclared (first use in this function); did you mean 'TVP5150_VDPOE'?
case TVP5150_PAD_AIP1A:
^~~~~~~~~~~~~~~~~
TVP5150_VDPOE
drivers/media/i2c/tvp5150.c:1946:8: error: 'TVP5150_PAD_AIP1B' undeclared (first use in this function); did you mean 'TVP5150_PAD_AIP1A'?
case TVP5150_PAD_AIP1B:
^~~~~~~~~~~~~~~~~
TVP5150_PAD_AIP1A
drivers/media/i2c/tvp5150.c:1956:8: error: 'TVP5150_PAD_VID_OUT' undeclared (first use in this function); did you mean 'TVP5150_PAD_AIP1B'?
case TVP5150_PAD_VID_OUT:
^~~~~~~~~~~~~~~~~~~
TVP5150_PAD_AIP1B
drivers/media/i2c/tvp5150.c:1988:9: error: 'struct tvp5150' has no member named 'connectors_num'
decoder->connectors_num = in;
^~
drivers/media/i2c/tvp5150.c: In function 'tvp5150_mc_init':
drivers/media/i2c/tvp5150.c:1882:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
cc1: some warnings being treated as errors
vim +1018 drivers/media/i2c/tvp5150.c
1010
1011 static struct v4l2_rect *
1012 __tvp5150_get_pad_crop(struct tvp5150 *decoder,
1013 struct v4l2_subdev_pad_config *cfg, unsigned int pad,
1014 enum v4l2_subdev_format_whence which)
1015 {
1016 switch (which) {
1017 case V4L2_SUBDEV_FORMAT_TRY:
> 1018 return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
1019 case V4L2_SUBDEV_FORMAT_ACTIVE:
1020 return &decoder->rect;
1021 default:
1022 return NULL;
1023 }
1024 }
1025
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 31408 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-09-18 20:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-18 15:18 [experimental:tvp5150-5 135/138] drivers/media/i2c/tvp5150.c:1018:10: error: implicit declaration of function 'v4l2_subdev_get_try_crop'; did you mean 'v4l2_subdev_has_op'? kbuild test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).