* [PATCH v4 2/2] [media] imx214: Add imx214 camera sensor driver
@ 2018-10-03 7:29 Ricardo Ribalda Delgado
2018-10-03 7:54 ` jacopo mondi
2018-10-03 11:29 ` Sakari Ailus
0 siblings, 2 replies; 3+ messages in thread
From: Ricardo Ribalda Delgado @ 2018-10-03 7:29 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Sakari Ailus,
Mauro Carvalho Chehab, linux-kernel, linux-media, jacopo
Cc: Ricardo Ribalda Delgado
Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
Changelog from v3:
Sakari Ailus:
- remove depends on OF
- enum {\n};
- only enable_gpio=0 in power_off
- disable regulators on error
- remove dup parenthesis
- dev_fwnode(dev)
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx214.c | 981 +++++++++++++++++++++++++++++++++++++
4 files changed, 1001 insertions(+)
create mode 100644 drivers/media/i2c/imx214.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 9989925f658d..2ae68894e700 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13521,6 +13521,14 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
+SONY IMX214 SENSOR DRIVER
+M: Ricardo Ribalda <ricardo.ribalda@gmail.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/imx214.c
+F: Documentation/devicetree/bindings/media/i2c/imx214.txt
+
SONY IMX258 SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@linux.intel.com>
L: linux-media@vger.kernel.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index bfdb494686bf..870976dee4a2 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+config VIDEO_IMX214
+ tristate "Sony IMX214 sensor support"
+ depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX214 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx214.
+
config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index a94eb03d10d4..61305edc6165 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_IMX214) += imx214.o
obj-$(CONFIG_VIDEO_IMX258) += imx258.o
obj-$(CONFIG_VIDEO_IMX274) += imx274.o
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
new file mode 100644
index 000000000000..7c94ac0d957c
--- /dev/null
+++ b/drivers/media/i2c/imx214.c
@@ -0,0 +1,981 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * imx214.c - imx214 sensor driver
+ *
+ * Copyright 2018 Qtechnology A/S
+ *
+ * Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define IMX214_DEFAULT_CLK_FREQ 24000000
+#define IMX214_DEFAULT_LINK_FREQ 480000000
+#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
+#define IMX214_WIDTH 4096
+#define IMX214_HEIGHT 2304
+#define IMX214_FPS 30
+#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
+
+static const char * const imx214_supply_name[] = {
+ "vdda",
+ "vddd",
+ "vdddo",
+};
+
+#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
+
+struct imx214 {
+ struct device *dev;
+ struct clk *xclk;
+ struct regmap *regmap;
+
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_mbus_framefmt fmt;
+ struct v4l2_rect crop;
+
+ struct v4l2_ctrl_handler ctrls;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
+
+ struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
+
+ struct gpio_desc *enable_gpio;
+
+ bool power_on;
+};
+
+struct reg_8 {
+ u16 addr;
+ u8 val;
+};
+
+enum {
+ IMX214_TABLE_WAIT_MS = 0,
+ IMX214_TABLE_END,
+ IMX214_MAX_RETRIES,
+ IMX214_WAIT_MS
+};
+
+/*From imx214_mode_tbls.h*/
+static const struct reg_8 mode_4096x2304[] = {
+ {0x0114, 0x03},
+ {0x0220, 0x00},
+ {0x0221, 0x11},
+ {0x0222, 0x01},
+ {0x0340, 0x0C},
+ {0x0341, 0x7A},
+ {0x0342, 0x13},
+ {0x0343, 0x90},
+ {0x0344, 0x00},
+ {0x0345, 0x38},
+ {0x0346, 0x01},
+ {0x0347, 0x98},
+ {0x0348, 0x10},
+ {0x0349, 0x37},
+ {0x034A, 0x0A},
+ {0x034B, 0x97},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x0900, 0x00},
+ {0x0901, 0x00},
+ {0x0902, 0x00},
+ {0x3000, 0x35},
+ {0x3054, 0x01},
+ {0x305C, 0x11},
+
+ {0x0112, 0x0A},
+ {0x0113, 0x0A},
+ {0x034C, 0x10},
+ {0x034D, 0x00},
+ {0x034E, 0x09},
+ {0x034F, 0x00},
+ {0x0401, 0x00},
+ {0x0404, 0x00},
+ {0x0405, 0x10},
+ {0x0408, 0x00},
+ {0x0409, 0x00},
+ {0x040A, 0x00},
+ {0x040B, 0x00},
+ {0x040C, 0x10},
+ {0x040D, 0x00},
+ {0x040E, 0x09},
+ {0x040F, 0x00},
+
+ {0x0301, 0x05},
+ {0x0303, 0x02},
+ {0x0305, 0x03},
+ {0x0306, 0x00},
+ {0x0307, 0x96},
+ {0x0309, 0x0A},
+ {0x030B, 0x01},
+ {0x0310, 0x00},
+
+ {0x0820, 0x12},
+ {0x0821, 0xC0},
+ {0x0822, 0x00},
+ {0x0823, 0x00},
+
+ {0x3A03, 0x09},
+ {0x3A04, 0x50},
+ {0x3A05, 0x01},
+
+ {0x0B06, 0x01},
+ {0x30A2, 0x00},
+
+ {0x30B4, 0x00},
+
+ {0x3A02, 0xFF},
+
+ {0x3011, 0x00},
+ {0x3013, 0x01},
+
+ {0x0202, 0x0C},
+ {0x0203, 0x70},
+ {0x0224, 0x01},
+ {0x0225, 0xF4},
+
+ {0x0204, 0x00},
+ {0x0205, 0x00},
+ {0x020E, 0x01},
+ {0x020F, 0x00},
+ {0x0210, 0x01},
+ {0x0211, 0x00},
+ {0x0212, 0x01},
+ {0x0213, 0x00},
+ {0x0214, 0x01},
+ {0x0215, 0x00},
+ {0x0216, 0x00},
+ {0x0217, 0x00},
+
+ {0x4170, 0x00},
+ {0x4171, 0x10},
+ {0x4176, 0x00},
+ {0x4177, 0x3C},
+ {0xAE20, 0x04},
+ {0xAE21, 0x5C},
+
+ {IMX214_TABLE_WAIT_MS, 10},
+ {0x0138, 0x01},
+ {IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_1920x1080[] = {
+ {0x0114, 0x03},
+ {0x0220, 0x00},
+ {0x0221, 0x11},
+ {0x0222, 0x01},
+ {0x0340, 0x0C},
+ {0x0341, 0x7A},
+ {0x0342, 0x13},
+ {0x0343, 0x90},
+ {0x0344, 0x04},
+ {0x0345, 0x78},
+ {0x0346, 0x03},
+ {0x0347, 0xFC},
+ {0x0348, 0x0B},
+ {0x0349, 0xF7},
+ {0x034A, 0x08},
+ {0x034B, 0x33},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x0900, 0x00},
+ {0x0901, 0x00},
+ {0x0902, 0x00},
+ {0x3000, 0x35},
+ {0x3054, 0x01},
+ {0x305C, 0x11},
+
+ {0x0112, 0x0A},
+ {0x0113, 0x0A},
+ {0x034C, 0x07},
+ {0x034D, 0x80},
+ {0x034E, 0x04},
+ {0x034F, 0x38},
+ {0x0401, 0x00},
+ {0x0404, 0x00},
+ {0x0405, 0x10},
+ {0x0408, 0x00},
+ {0x0409, 0x00},
+ {0x040A, 0x00},
+ {0x040B, 0x00},
+ {0x040C, 0x07},
+ {0x040D, 0x80},
+ {0x040E, 0x04},
+ {0x040F, 0x38},
+
+ {0x0301, 0x05},
+ {0x0303, 0x02},
+ {0x0305, 0x03},
+ {0x0306, 0x00},
+ {0x0307, 0x96},
+ {0x0309, 0x0A},
+ {0x030B, 0x01},
+ {0x0310, 0x00},
+
+ {0x0820, 0x12},
+ {0x0821, 0xC0},
+ {0x0822, 0x00},
+ {0x0823, 0x00},
+
+ {0x3A03, 0x04},
+ {0x3A04, 0xF8},
+ {0x3A05, 0x02},
+
+ {0x0B06, 0x01},
+ {0x30A2, 0x00},
+
+ {0x30B4, 0x00},
+
+ {0x3A02, 0xFF},
+
+ {0x3011, 0x00},
+ {0x3013, 0x01},
+
+ {0x0202, 0x0C},
+ {0x0203, 0x70},
+ {0x0224, 0x01},
+ {0x0225, 0xF4},
+
+ {0x0204, 0x00},
+ {0x0205, 0x00},
+ {0x020E, 0x01},
+ {0x020F, 0x00},
+ {0x0210, 0x01},
+ {0x0211, 0x00},
+ {0x0212, 0x01},
+ {0x0213, 0x00},
+ {0x0214, 0x01},
+ {0x0215, 0x00},
+ {0x0216, 0x00},
+ {0x0217, 0x00},
+
+ {0x4170, 0x00},
+ {0x4171, 0x10},
+ {0x4176, 0x00},
+ {0x4177, 0x3C},
+ {0xAE20, 0x04},
+ {0xAE21, 0x5C},
+
+ {IMX214_TABLE_WAIT_MS, 10},
+ {0x0138, 0x01},
+ {IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_table_common[] = {
+ /* software reset */
+
+ /* software standby settings */
+ {0x0100, 0x00},
+
+ /* ATR setting */
+ {0x9300, 0x02},
+
+ /* external clock setting */
+ {0x0136, 0x18},
+ {0x0137, 0x00},
+
+ /* global setting */
+ /* basic config */
+ {0x0101, 0x00},
+ {0x0105, 0x01},
+ {0x0106, 0x01},
+ {0x4550, 0x02},
+ {0x4601, 0x00},
+ {0x4642, 0x05},
+ {0x6227, 0x11},
+ {0x6276, 0x00},
+ {0x900E, 0x06},
+ {0xA802, 0x90},
+ {0xA803, 0x11},
+ {0xA804, 0x62},
+ {0xA805, 0x77},
+ {0xA806, 0xAE},
+ {0xA807, 0x34},
+ {0xA808, 0xAE},
+ {0xA809, 0x35},
+ {0xA80A, 0x62},
+ {0xA80B, 0x83},
+ {0xAE33, 0x00},
+
+ /* analog setting */
+ {0x4174, 0x00},
+ {0x4175, 0x11},
+ {0x4612, 0x29},
+ {0x461B, 0x12},
+ {0x461F, 0x06},
+ {0x4635, 0x07},
+ {0x4637, 0x30},
+ {0x463F, 0x18},
+ {0x4641, 0x0D},
+ {0x465B, 0x12},
+ {0x465F, 0x11},
+ {0x4663, 0x11},
+ {0x4667, 0x0F},
+ {0x466F, 0x0F},
+ {0x470E, 0x09},
+ {0x4909, 0xAB},
+ {0x490B, 0x95},
+ {0x4915, 0x5D},
+ {0x4A5F, 0xFF},
+ {0x4A61, 0xFF},
+ {0x4A73, 0x62},
+ {0x4A85, 0x00},
+ {0x4A87, 0xFF},
+
+ /* embedded data */
+ {0x5041, 0x04},
+ {0x583C, 0x04},
+ {0x620E, 0x04},
+ {0x6EB2, 0x01},
+ {0x6EB3, 0x00},
+ {0x9300, 0x02},
+
+ /* imagequality */
+ /* HDR setting */
+ {0x3001, 0x07},
+ {0x6D12, 0x3F},
+ {0x6D13, 0xFF},
+ {0x9344, 0x03},
+ {0x9706, 0x10},
+ {0x9707, 0x03},
+ {0x9708, 0x03},
+ {0x9E04, 0x01},
+ {0x9E05, 0x00},
+ {0x9E0C, 0x01},
+ {0x9E0D, 0x02},
+ {0x9E24, 0x00},
+ {0x9E25, 0x8C},
+ {0x9E26, 0x00},
+ {0x9E27, 0x94},
+ {0x9E28, 0x00},
+ {0x9E29, 0x96},
+
+ /* CNR parameter setting */
+ {0x69DB, 0x01},
+
+ /* Moire reduction */
+ {0x6957, 0x01},
+
+ /* image enhancment */
+ {0x6987, 0x17},
+ {0x698A, 0x03},
+ {0x698B, 0x03},
+
+ /* white balanace */
+ {0x0B8E, 0x01},
+ {0x0B8F, 0x00},
+ {0x0B90, 0x01},
+ {0x0B91, 0x00},
+ {0x0B92, 0x01},
+ {0x0B93, 0x00},
+ {0x0B94, 0x01},
+ {0x0B95, 0x00},
+
+ /* ATR setting */
+ {0x6E50, 0x00},
+ {0x6E51, 0x32},
+ {0x9340, 0x00},
+ {0x9341, 0x3C},
+ {0x9342, 0x03},
+ {0x9343, 0xFF},
+ {IMX214_TABLE_END, 0x00}
+};
+
+/*
+ * Declare modes in order, from biggest
+ * to smallest height.
+ */
+static const struct imx214_mode {
+ u32 width;
+ u32 height;
+ const struct reg_8 *reg_table;
+} imx214_modes[] = {
+ {
+ .width = 4096,
+ .height = 2304,
+ .reg_table = mode_4096x2304,
+ },
+ {
+ .width = 1920,
+ .height = 1080,
+ .reg_table = mode_1920x1080,
+ },
+};
+
+static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct imx214, sd);
+}
+
+static int imx214_set_power_on(struct imx214 *imx214)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ if (ret < 0) {
+ dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+
+ usleep_range(2000, 3000);
+
+ ret = clk_prepare_enable(imx214->xclk);
+ if (ret < 0) {
+ regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ dev_err(imx214->dev, "clk prepare enable failed\n");
+ return ret;
+ }
+
+ gpiod_set_value_cansleep(imx214->enable_gpio, 1);
+ usleep_range(12000, 15000);
+
+ return 0;
+}
+
+static void imx214_set_power_off(struct imx214 *imx214)
+{
+ gpiod_set_value_cansleep(imx214->enable_gpio, 0);
+
+ clk_disable_unprepare(imx214->xclk);
+
+ regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ usleep_range(10, 20);
+}
+
+static int imx214_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+ int ret = 0;
+
+ on = !!on;
+
+ if (imx214->power_on == on)
+ return 0;
+
+ if (on)
+ ret = imx214_set_power_on(imx214);
+ else
+ imx214_set_power_off(imx214);
+
+ imx214->power_on = on;
+
+ return 0;
+}
+
+static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = IMX214_MBUS_CODE;
+
+ return 0;
+}
+
+static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->code != IMX214_MBUS_CODE)
+ return -EINVAL;
+
+ if (fse->index >= ARRAY_SIZE(imx214_modes))
+ return -EINVAL;
+
+ fse->min_width = fse->max_width = imx214_modes[fse->index].width;
+ fse->min_height = fse->max_height = imx214_modes[fse->index].height;
+
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int imx214_s_register(struct v4l2_subdev *subdev,
+ const struct v4l2_dbg_register *reg)
+{
+ struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+
+ return regmap_write(imx214->regmap, reg->reg, reg->val);
+}
+
+static int imx214_g_register(struct v4l2_subdev *subdev,
+ struct v4l2_dbg_register *reg)
+{
+ struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+ unsigned int aux;
+ int ret;
+
+ reg->size = 1;
+ ret = regmap_read(imx214->regmap, reg->reg, &aux);
+ reg->val = aux;
+
+ return ret;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops imx214_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = imx214_g_register,
+ .s_register = imx214_s_register,
+#endif
+ .s_power = imx214_s_power,
+};
+
+static struct v4l2_mbus_framefmt *
+__imx214_get_pad_format(struct imx214 *imx214,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx214->fmt;
+ default:
+ return NULL;
+ }
+}
+
+static int imx214_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+
+ format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
+ format->which);
+
+ return 0;
+}
+
+static struct v4l2_rect *
+__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx214->crop;
+ default:
+ return NULL;
+ }
+}
+
+static int imx214_find_mode(u32 height)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(imx214_modes) - 1 ; i++)
+ if (height >= imx214_modes[i].height)
+ return i;
+
+ return i;
+}
+
+static int imx214_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ int mode;
+
+ __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
+
+ mode = format ? imx214_find_mode(format->format.height) : 0;
+
+ __crop->width = imx214_modes[mode].width;
+ __crop->height = imx214_modes[mode].height;
+
+ __format = __imx214_get_pad_format(imx214, cfg, format->pad,
+ format->which);
+ __format->width = __crop->width;
+ __format->height = __crop->height;
+ __format->code = IMX214_MBUS_CODE;
+ __format->field = V4L2_FIELD_NONE;
+ __format->colorspace = V4L2_COLORSPACE_SRGB;
+ __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
+ __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
+ __format->colorspace, __format->ycbcr_enc);
+ __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
+
+ format->format = *__format;
+
+ return 0;
+}
+
+static int imx214_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+
+ if (sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
+ sel->which);
+ return 0;
+}
+
+static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg)
+{
+ struct v4l2_subdev_format fmt = { };
+
+ fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.format.width = imx214_modes[0].width;
+ fmt.format.height = imx214_modes[0].height;
+
+ imx214_set_format(subdev, cfg, &fmt);
+
+ return 0;
+}
+
+#define MAX_CMD 4
+static int imx214_write_table(struct imx214 *imx214,
+ const struct reg_8 table[])
+{
+ u8 vals[MAX_CMD];
+ int ret;
+ int i;
+
+ for (table = table; table->addr != IMX214_TABLE_END ; table++) {
+ if (table->addr == IMX214_TABLE_WAIT_MS) {
+ usleep_range(table->val * 1000,
+ table->val * 1000 + 500);
+ continue;
+ }
+
+ for (i = 0; i < MAX_CMD; i++) {
+ if (table[i].addr != (table[0].addr + i))
+ break;
+ vals[i] = table[i].val;
+ }
+
+ ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
+
+ if (ret) {
+ dev_err(imx214->dev, "write_table error: %d\n", ret);
+ return ret;
+ }
+
+ table += i - 1;
+ }
+
+ return 0;
+}
+
+static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ struct imx214 *imx214 = to_imx214(subdev);
+ int ret;
+
+ if (enable) {
+ int mode = imx214_find_mode(imx214->fmt.height);
+
+ ret = imx214_write_table(imx214, mode_table_common);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent common table %d\n",
+ ret);
+ return ret;
+ }
+ ret = imx214_write_table(imx214, imx214_modes[mode].reg_table);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent mode table %d\n",
+ ret);
+ return ret;
+ }
+ ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sync v4l2 controls\n");
+ return ret;
+ }
+ ret = regmap_write(imx214->regmap, 0x100, 1);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent start table %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ ret = regmap_write(imx214->regmap, 0x100, 0);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent stop table %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_frame_interval *fival)
+{
+ fival->pad = 0;
+ fival->interval.numerator = 1;
+ fival->interval.denominator = IMX214_FPS;
+
+ return 0;
+}
+
+static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ int mode;
+
+ if (fie->index != 0)
+ return -EINVAL;
+
+ mode = imx214_find_mode(fie->height);
+
+ fie->code = IMX214_MBUS_CODE;
+ fie->width = imx214_modes[mode].width;
+ fie->height = imx214_modes[mode].height;
+ fie->interval.numerator = 1;
+ fie->interval.denominator = IMX214_FPS;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx214_video_ops = {
+ .s_stream = imx214_s_stream,
+ .g_frame_interval = imx214_g_frame_interval,
+ .s_frame_interval = imx214_g_frame_interval,
+};
+
+static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
+ .enum_mbus_code = imx214_enum_mbus_code,
+ .enum_frame_size = imx214_enum_frame_size,
+ .enum_frame_interval = imx214_enum_frame_interval,
+ .get_fmt = imx214_get_format,
+ .set_fmt = imx214_set_format,
+ .get_selection = imx214_get_selection,
+ .init_cfg = imx214_entity_init_cfg,
+};
+
+static const struct v4l2_subdev_ops imx214_subdev_ops = {
+ .core = &imx214_core_ops,
+ .video = &imx214_video_ops,
+ .pad = &imx214_subdev_pad_ops,
+};
+
+static const struct regmap_config sensor_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
+{
+ int i;
+
+ for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
+ imx214->supplies[i].supply = imx214_supply_name[i];
+
+ return devm_regulator_bulk_get(dev,
+ IMX214_NUM_SUPPLIES,
+ imx214->supplies);
+}
+
+static int imx214_parse_fwnode(struct device *dev)
+{
+ struct fwnode_handle *endpoint;
+ struct v4l2_fwnode_endpoint *bus_cfg;
+ int i;
+ int ret = 0;
+
+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+ if (!endpoint) {
+ dev_err(dev, "endpoint node not found\n");
+ return -EINVAL;
+ }
+
+ bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
+ if (IS_ERR(bus_cfg)) {
+ dev_err(dev, "parsing endpoint node failed\n");
+ return PTR_ERR(bus_cfg);
+ }
+
+ if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {
+ dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
+ bus_cfg->bus_type, V4L2_MBUS_CSI2);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)
+ if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
+ break;
+
+ if (i == bus_cfg->nr_of_link_frequencies) {
+ dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
+ IMX214_DEFAULT_LINK_FREQ);
+ ret = -EINVAL;
+ goto done;
+ }
+
+done:
+ v4l2_fwnode_endpoint_free(bus_cfg);
+ fwnode_handle_put(endpoint);
+ return ret;
+}
+
+static int imx214_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct imx214 *imx214;
+ int ret;
+ static const s64 link_freq[] = {
+ IMX214_DEFAULT_LINK_FREQ,
+ };
+
+ ret = imx214_parse_fwnode(dev);
+ if (ret)
+ return ret;
+
+ imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
+ if (!imx214)
+ return -ENOMEM;
+
+ imx214->dev = dev;
+
+ imx214->xclk = devm_clk_get(dev, NULL);
+ if (IS_ERR(imx214->xclk)) {
+ dev_err(dev, "could not get xclk");
+ return PTR_ERR(imx214->xclk);
+ }
+
+ ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
+ if (ret) {
+ dev_err(dev, "could not set xclk frequency\n");
+ return ret;
+ }
+
+ ret = imx214_get_regulators(dev, imx214);
+ if (ret < 0) {
+ dev_err(dev, "cannot get regulators\n");
+ return ret;
+ }
+
+ imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(imx214->enable_gpio)) {
+ dev_err(dev, "cannot get enable gpio\n");
+ return PTR_ERR(imx214->enable_gpio);
+ }
+
+ imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
+ if (IS_ERR(imx214->regmap)) {
+ dev_err(dev, "regmap init failed\n");
+ return PTR_ERR(imx214->regmap);
+ }
+
+ v4l2_ctrl_handler_init(&imx214->ctrls, 2);
+
+ imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
+ V4L2_CID_PIXEL_RATE, 0,
+ IMX214_DEFAULT_PIXEL_RATE, 1,
+ IMX214_DEFAULT_PIXEL_RATE);
+ imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(link_freq) - 1,
+ 0, link_freq);
+ if (imx214->link_freq)
+ imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ ret = imx214->ctrls.error;
+ if (ret) {
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto free_ctrl;
+ }
+
+ imx214->sd.ctrl_handler = &imx214->ctrls;
+ ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d setting default controls\n", ret);
+ goto free_ctrl;
+ }
+
+ v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
+ imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
+ imx214->sd.dev = &client->dev;
+ imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
+ if (ret < 0) {
+ dev_err(dev, "could not register media entity\n");
+ goto free_ctrl;
+ }
+
+ imx214_entity_init_cfg(&imx214->sd, NULL);
+
+ ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
+ if (ret < 0) {
+ dev_err(dev, "could not register v4l2 device\n");
+ goto free_entity;
+ }
+
+ return 0;
+
+free_entity:
+ media_entity_cleanup(&imx214->sd.entity);
+free_ctrl:
+ v4l2_ctrl_handler_free(&imx214->ctrls);
+
+ return ret;
+}
+
+static int imx214_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx214 *imx214 = to_imx214(sd);
+
+ v4l2_async_unregister_subdev(&imx214->sd);
+ media_entity_cleanup(&imx214->sd.entity);
+ v4l2_ctrl_handler_free(&imx214->ctrls);
+
+ return 0;
+}
+
+static const struct of_device_id imx214_of_match[] = {
+ { .compatible = "sony,imx214" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, imx214_of_match);
+
+static struct i2c_driver imx214_i2c_driver = {
+ .driver = {
+ .of_match_table = imx214_of_match,
+ .name = "imx214",
+ },
+ .probe_new = imx214_probe,
+ .remove = imx214_remove,
+};
+
+module_i2c_driver(imx214_i2c_driver);
+
+MODULE_DESCRIPTION("Sony IMX214 Camera drier");
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
+MODULE_LICENSE("GPL v2");
--
2.19.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v4 2/2] [media] imx214: Add imx214 camera sensor driver
2018-10-03 7:29 [PATCH v4 2/2] [media] imx214: Add imx214 camera sensor driver Ricardo Ribalda Delgado
@ 2018-10-03 7:54 ` jacopo mondi
2018-10-03 11:29 ` Sakari Ailus
1 sibling, 0 replies; 3+ messages in thread
From: jacopo mondi @ 2018-10-03 7:54 UTC (permalink / raw)
To: Ricardo Ribalda Delgado
Cc: Hans Verkuil, Laurent Pinchart, Sakari Ailus,
Mauro Carvalho Chehab, linux-kernel, linux-media
[-- Attachment #1: Type: text/plain, Size: 26457 bytes --]
Hi Ricardo,
On Wed, Oct 03, 2018 at 09:29:05AM +0200, Ricardo Ribalda Delgado wrote:
> Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
> This is a camera sensor using the I2C bus for control and the
> CSI-2 bus for data.
>
> Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Thanks for addressing my comments on v2. Please add my:
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Thanks
j
> ---
> Changelog from v3:
>
> Sakari Ailus:
> - remove depends on OF
> - enum {\n};
> - only enable_gpio=0 in power_off
> - disable regulators on error
> - remove dup parenthesis
> - dev_fwnode(dev)
>
> MAINTAINERS | 8 +
> drivers/media/i2c/Kconfig | 11 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/imx214.c | 981 +++++++++++++++++++++++++++++++++++++
> 4 files changed, 1001 insertions(+)
> create mode 100644 drivers/media/i2c/imx214.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9989925f658d..2ae68894e700 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13521,6 +13521,14 @@ S: Maintained
> F: drivers/ssb/
> F: include/linux/ssb/
>
> +SONY IMX214 SENSOR DRIVER
> +M: Ricardo Ribalda <ricardo.ribalda@gmail.com>
> +L: linux-media@vger.kernel.org
> +T: git git://linuxtv.org/media_tree.git
> +S: Maintained
> +F: drivers/media/i2c/imx214.c
> +F: Documentation/devicetree/bindings/media/i2c/imx214.txt
> +
> SONY IMX258 SENSOR DRIVER
> M: Sakari Ailus <sakari.ailus@linux.intel.com>
> L: linux-media@vger.kernel.org
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index bfdb494686bf..870976dee4a2 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL
> config VIDEO_SMIAPP_PLL
> tristate
>
> +config VIDEO_IMX214
> + tristate "Sony IMX214 sensor support"
> + depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + depends on MEDIA_CAMERA_SUPPORT
> + help
> + This is a Video4Linux2 sensor driver for the Sony
> + IMX214 camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called imx214.
> +
> config VIDEO_IMX258
> tristate "Sony IMX258 sensor support"
> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index a94eb03d10d4..61305edc6165 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
> obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
> obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
> obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> +obj-$(CONFIG_VIDEO_IMX214) += imx214.o
> obj-$(CONFIG_VIDEO_IMX258) += imx258.o
> obj-$(CONFIG_VIDEO_IMX274) += imx274.o
>
> diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
> new file mode 100644
> index 000000000000..7c94ac0d957c
> --- /dev/null
> +++ b/drivers/media/i2c/imx214.c
> @@ -0,0 +1,981 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * imx214.c - imx214 sensor driver
> + *
> + * Copyright 2018 Qtechnology A/S
> + *
> + * Ricardo Ribalda <ricardo.ribalda@gmail.com>
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define IMX214_DEFAULT_CLK_FREQ 24000000
> +#define IMX214_DEFAULT_LINK_FREQ 480000000
> +#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
> +#define IMX214_WIDTH 4096
> +#define IMX214_HEIGHT 2304
> +#define IMX214_FPS 30
> +#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
> +
> +static const char * const imx214_supply_name[] = {
> + "vdda",
> + "vddd",
> + "vdddo",
> +};
> +
> +#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
> +
> +struct imx214 {
> + struct device *dev;
> + struct clk *xclk;
> + struct regmap *regmap;
> +
> + struct v4l2_subdev sd;
> + struct media_pad pad;
> + struct v4l2_mbus_framefmt fmt;
> + struct v4l2_rect crop;
> +
> + struct v4l2_ctrl_handler ctrls;
> + struct v4l2_ctrl *pixel_rate;
> + struct v4l2_ctrl *link_freq;
> +
> + struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
> +
> + struct gpio_desc *enable_gpio;
> +
> + bool power_on;
> +};
> +
> +struct reg_8 {
> + u16 addr;
> + u8 val;
> +};
> +
> +enum {
> + IMX214_TABLE_WAIT_MS = 0,
> + IMX214_TABLE_END,
> + IMX214_MAX_RETRIES,
> + IMX214_WAIT_MS
> +};
> +
> +/*From imx214_mode_tbls.h*/
> +static const struct reg_8 mode_4096x2304[] = {
> + {0x0114, 0x03},
> + {0x0220, 0x00},
> + {0x0221, 0x11},
> + {0x0222, 0x01},
> + {0x0340, 0x0C},
> + {0x0341, 0x7A},
> + {0x0342, 0x13},
> + {0x0343, 0x90},
> + {0x0344, 0x00},
> + {0x0345, 0x38},
> + {0x0346, 0x01},
> + {0x0347, 0x98},
> + {0x0348, 0x10},
> + {0x0349, 0x37},
> + {0x034A, 0x0A},
> + {0x034B, 0x97},
> + {0x0381, 0x01},
> + {0x0383, 0x01},
> + {0x0385, 0x01},
> + {0x0387, 0x01},
> + {0x0900, 0x00},
> + {0x0901, 0x00},
> + {0x0902, 0x00},
> + {0x3000, 0x35},
> + {0x3054, 0x01},
> + {0x305C, 0x11},
> +
> + {0x0112, 0x0A},
> + {0x0113, 0x0A},
> + {0x034C, 0x10},
> + {0x034D, 0x00},
> + {0x034E, 0x09},
> + {0x034F, 0x00},
> + {0x0401, 0x00},
> + {0x0404, 0x00},
> + {0x0405, 0x10},
> + {0x0408, 0x00},
> + {0x0409, 0x00},
> + {0x040A, 0x00},
> + {0x040B, 0x00},
> + {0x040C, 0x10},
> + {0x040D, 0x00},
> + {0x040E, 0x09},
> + {0x040F, 0x00},
> +
> + {0x0301, 0x05},
> + {0x0303, 0x02},
> + {0x0305, 0x03},
> + {0x0306, 0x00},
> + {0x0307, 0x96},
> + {0x0309, 0x0A},
> + {0x030B, 0x01},
> + {0x0310, 0x00},
> +
> + {0x0820, 0x12},
> + {0x0821, 0xC0},
> + {0x0822, 0x00},
> + {0x0823, 0x00},
> +
> + {0x3A03, 0x09},
> + {0x3A04, 0x50},
> + {0x3A05, 0x01},
> +
> + {0x0B06, 0x01},
> + {0x30A2, 0x00},
> +
> + {0x30B4, 0x00},
> +
> + {0x3A02, 0xFF},
> +
> + {0x3011, 0x00},
> + {0x3013, 0x01},
> +
> + {0x0202, 0x0C},
> + {0x0203, 0x70},
> + {0x0224, 0x01},
> + {0x0225, 0xF4},
> +
> + {0x0204, 0x00},
> + {0x0205, 0x00},
> + {0x020E, 0x01},
> + {0x020F, 0x00},
> + {0x0210, 0x01},
> + {0x0211, 0x00},
> + {0x0212, 0x01},
> + {0x0213, 0x00},
> + {0x0214, 0x01},
> + {0x0215, 0x00},
> + {0x0216, 0x00},
> + {0x0217, 0x00},
> +
> + {0x4170, 0x00},
> + {0x4171, 0x10},
> + {0x4176, 0x00},
> + {0x4177, 0x3C},
> + {0xAE20, 0x04},
> + {0xAE21, 0x5C},
> +
> + {IMX214_TABLE_WAIT_MS, 10},
> + {0x0138, 0x01},
> + {IMX214_TABLE_END, 0x00}
> +};
> +
> +static const struct reg_8 mode_1920x1080[] = {
> + {0x0114, 0x03},
> + {0x0220, 0x00},
> + {0x0221, 0x11},
> + {0x0222, 0x01},
> + {0x0340, 0x0C},
> + {0x0341, 0x7A},
> + {0x0342, 0x13},
> + {0x0343, 0x90},
> + {0x0344, 0x04},
> + {0x0345, 0x78},
> + {0x0346, 0x03},
> + {0x0347, 0xFC},
> + {0x0348, 0x0B},
> + {0x0349, 0xF7},
> + {0x034A, 0x08},
> + {0x034B, 0x33},
> + {0x0381, 0x01},
> + {0x0383, 0x01},
> + {0x0385, 0x01},
> + {0x0387, 0x01},
> + {0x0900, 0x00},
> + {0x0901, 0x00},
> + {0x0902, 0x00},
> + {0x3000, 0x35},
> + {0x3054, 0x01},
> + {0x305C, 0x11},
> +
> + {0x0112, 0x0A},
> + {0x0113, 0x0A},
> + {0x034C, 0x07},
> + {0x034D, 0x80},
> + {0x034E, 0x04},
> + {0x034F, 0x38},
> + {0x0401, 0x00},
> + {0x0404, 0x00},
> + {0x0405, 0x10},
> + {0x0408, 0x00},
> + {0x0409, 0x00},
> + {0x040A, 0x00},
> + {0x040B, 0x00},
> + {0x040C, 0x07},
> + {0x040D, 0x80},
> + {0x040E, 0x04},
> + {0x040F, 0x38},
> +
> + {0x0301, 0x05},
> + {0x0303, 0x02},
> + {0x0305, 0x03},
> + {0x0306, 0x00},
> + {0x0307, 0x96},
> + {0x0309, 0x0A},
> + {0x030B, 0x01},
> + {0x0310, 0x00},
> +
> + {0x0820, 0x12},
> + {0x0821, 0xC0},
> + {0x0822, 0x00},
> + {0x0823, 0x00},
> +
> + {0x3A03, 0x04},
> + {0x3A04, 0xF8},
> + {0x3A05, 0x02},
> +
> + {0x0B06, 0x01},
> + {0x30A2, 0x00},
> +
> + {0x30B4, 0x00},
> +
> + {0x3A02, 0xFF},
> +
> + {0x3011, 0x00},
> + {0x3013, 0x01},
> +
> + {0x0202, 0x0C},
> + {0x0203, 0x70},
> + {0x0224, 0x01},
> + {0x0225, 0xF4},
> +
> + {0x0204, 0x00},
> + {0x0205, 0x00},
> + {0x020E, 0x01},
> + {0x020F, 0x00},
> + {0x0210, 0x01},
> + {0x0211, 0x00},
> + {0x0212, 0x01},
> + {0x0213, 0x00},
> + {0x0214, 0x01},
> + {0x0215, 0x00},
> + {0x0216, 0x00},
> + {0x0217, 0x00},
> +
> + {0x4170, 0x00},
> + {0x4171, 0x10},
> + {0x4176, 0x00},
> + {0x4177, 0x3C},
> + {0xAE20, 0x04},
> + {0xAE21, 0x5C},
> +
> + {IMX214_TABLE_WAIT_MS, 10},
> + {0x0138, 0x01},
> + {IMX214_TABLE_END, 0x00}
> +};
> +
> +static const struct reg_8 mode_table_common[] = {
> + /* software reset */
> +
> + /* software standby settings */
> + {0x0100, 0x00},
> +
> + /* ATR setting */
> + {0x9300, 0x02},
> +
> + /* external clock setting */
> + {0x0136, 0x18},
> + {0x0137, 0x00},
> +
> + /* global setting */
> + /* basic config */
> + {0x0101, 0x00},
> + {0x0105, 0x01},
> + {0x0106, 0x01},
> + {0x4550, 0x02},
> + {0x4601, 0x00},
> + {0x4642, 0x05},
> + {0x6227, 0x11},
> + {0x6276, 0x00},
> + {0x900E, 0x06},
> + {0xA802, 0x90},
> + {0xA803, 0x11},
> + {0xA804, 0x62},
> + {0xA805, 0x77},
> + {0xA806, 0xAE},
> + {0xA807, 0x34},
> + {0xA808, 0xAE},
> + {0xA809, 0x35},
> + {0xA80A, 0x62},
> + {0xA80B, 0x83},
> + {0xAE33, 0x00},
> +
> + /* analog setting */
> + {0x4174, 0x00},
> + {0x4175, 0x11},
> + {0x4612, 0x29},
> + {0x461B, 0x12},
> + {0x461F, 0x06},
> + {0x4635, 0x07},
> + {0x4637, 0x30},
> + {0x463F, 0x18},
> + {0x4641, 0x0D},
> + {0x465B, 0x12},
> + {0x465F, 0x11},
> + {0x4663, 0x11},
> + {0x4667, 0x0F},
> + {0x466F, 0x0F},
> + {0x470E, 0x09},
> + {0x4909, 0xAB},
> + {0x490B, 0x95},
> + {0x4915, 0x5D},
> + {0x4A5F, 0xFF},
> + {0x4A61, 0xFF},
> + {0x4A73, 0x62},
> + {0x4A85, 0x00},
> + {0x4A87, 0xFF},
> +
> + /* embedded data */
> + {0x5041, 0x04},
> + {0x583C, 0x04},
> + {0x620E, 0x04},
> + {0x6EB2, 0x01},
> + {0x6EB3, 0x00},
> + {0x9300, 0x02},
> +
> + /* imagequality */
> + /* HDR setting */
> + {0x3001, 0x07},
> + {0x6D12, 0x3F},
> + {0x6D13, 0xFF},
> + {0x9344, 0x03},
> + {0x9706, 0x10},
> + {0x9707, 0x03},
> + {0x9708, 0x03},
> + {0x9E04, 0x01},
> + {0x9E05, 0x00},
> + {0x9E0C, 0x01},
> + {0x9E0D, 0x02},
> + {0x9E24, 0x00},
> + {0x9E25, 0x8C},
> + {0x9E26, 0x00},
> + {0x9E27, 0x94},
> + {0x9E28, 0x00},
> + {0x9E29, 0x96},
> +
> + /* CNR parameter setting */
> + {0x69DB, 0x01},
> +
> + /* Moire reduction */
> + {0x6957, 0x01},
> +
> + /* image enhancment */
> + {0x6987, 0x17},
> + {0x698A, 0x03},
> + {0x698B, 0x03},
> +
> + /* white balanace */
> + {0x0B8E, 0x01},
> + {0x0B8F, 0x00},
> + {0x0B90, 0x01},
> + {0x0B91, 0x00},
> + {0x0B92, 0x01},
> + {0x0B93, 0x00},
> + {0x0B94, 0x01},
> + {0x0B95, 0x00},
> +
> + /* ATR setting */
> + {0x6E50, 0x00},
> + {0x6E51, 0x32},
> + {0x9340, 0x00},
> + {0x9341, 0x3C},
> + {0x9342, 0x03},
> + {0x9343, 0xFF},
> + {IMX214_TABLE_END, 0x00}
> +};
> +
> +/*
> + * Declare modes in order, from biggest
> + * to smallest height.
> + */
> +static const struct imx214_mode {
> + u32 width;
> + u32 height;
> + const struct reg_8 *reg_table;
> +} imx214_modes[] = {
> + {
> + .width = 4096,
> + .height = 2304,
> + .reg_table = mode_4096x2304,
> + },
> + {
> + .width = 1920,
> + .height = 1080,
> + .reg_table = mode_1920x1080,
> + },
> +};
> +
> +static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct imx214, sd);
> +}
> +
> +static int imx214_set_power_on(struct imx214 *imx214)
> +{
> + int ret;
> +
> + ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
> + if (ret < 0) {
> + dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + usleep_range(2000, 3000);
> +
> + ret = clk_prepare_enable(imx214->xclk);
> + if (ret < 0) {
> + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> + dev_err(imx214->dev, "clk prepare enable failed\n");
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(imx214->enable_gpio, 1);
> + usleep_range(12000, 15000);
> +
> + return 0;
> +}
> +
> +static void imx214_set_power_off(struct imx214 *imx214)
> +{
> + gpiod_set_value_cansleep(imx214->enable_gpio, 0);
> +
> + clk_disable_unprepare(imx214->xclk);
> +
> + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> + usleep_range(10, 20);
> +}
> +
> +static int imx214_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> + int ret = 0;
> +
> + on = !!on;
> +
> + if (imx214->power_on == on)
> + return 0;
> +
> + if (on)
> + ret = imx214_set_power_on(imx214);
> + else
> + imx214_set_power_off(imx214);
> +
> + imx214->power_on = on;
> +
> + return 0;
> +}
> +
> +static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index > 0)
> + return -EINVAL;
> +
> + code->code = IMX214_MBUS_CODE;
> +
> + return 0;
> +}
> +
> +static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + if (fse->code != IMX214_MBUS_CODE)
> + return -EINVAL;
> +
> + if (fse->index >= ARRAY_SIZE(imx214_modes))
> + return -EINVAL;
> +
> + fse->min_width = fse->max_width = imx214_modes[fse->index].width;
> + fse->min_height = fse->max_height = imx214_modes[fse->index].height;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int imx214_s_register(struct v4l2_subdev *subdev,
> + const struct v4l2_dbg_register *reg)
> +{
> + struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> +
> + return regmap_write(imx214->regmap, reg->reg, reg->val);
> +}
> +
> +static int imx214_g_register(struct v4l2_subdev *subdev,
> + struct v4l2_dbg_register *reg)
> +{
> + struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> + unsigned int aux;
> + int ret;
> +
> + reg->size = 1;
> + ret = regmap_read(imx214->regmap, reg->reg, &aux);
> + reg->val = aux;
> +
> + return ret;
> +}
> +#endif
> +
> +static const struct v4l2_subdev_core_ops imx214_core_ops = {
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .g_register = imx214_g_register,
> + .s_register = imx214_s_register,
> +#endif
> + .s_power = imx214_s_power,
> +};
> +
> +static struct v4l2_mbus_framefmt *
> +__imx214_get_pad_format(struct imx214 *imx214,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad,
> + enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &imx214->fmt;
> + default:
> + return NULL;
> + }
> +}
> +
> +static int imx214_get_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
> + format->which);
> +
> + return 0;
> +}
> +
> +static struct v4l2_rect *
> +__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad, enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &imx214->crop;
> + default:
> + return NULL;
> + }
> +}
> +
> +static int imx214_find_mode(u32 height)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(imx214_modes) - 1 ; i++)
> + if (height >= imx214_modes[i].height)
> + return i;
> +
> + return i;
> +}
> +
> +static int imx214_set_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> + struct v4l2_mbus_framefmt *__format;
> + struct v4l2_rect *__crop;
> + int mode;
> +
> + __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
> +
> + mode = format ? imx214_find_mode(format->format.height) : 0;
> +
> + __crop->width = imx214_modes[mode].width;
> + __crop->height = imx214_modes[mode].height;
> +
> + __format = __imx214_get_pad_format(imx214, cfg, format->pad,
> + format->which);
> + __format->width = __crop->width;
> + __format->height = __crop->height;
> + __format->code = IMX214_MBUS_CODE;
> + __format->field = V4L2_FIELD_NONE;
> + __format->colorspace = V4L2_COLORSPACE_SRGB;
> + __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
> + __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> + __format->colorspace, __format->ycbcr_enc);
> + __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
> +
> + format->format = *__format;
> +
> + return 0;
> +}
> +
> +static int imx214_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_selection *sel)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + if (sel->target != V4L2_SEL_TGT_CROP)
> + return -EINVAL;
> +
> + sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
> + sel->which);
> + return 0;
> +}
> +
> +static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg)
> +{
> + struct v4l2_subdev_format fmt = { };
> +
> + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> + fmt.format.width = imx214_modes[0].width;
> + fmt.format.height = imx214_modes[0].height;
> +
> + imx214_set_format(subdev, cfg, &fmt);
> +
> + return 0;
> +}
> +
> +#define MAX_CMD 4
> +static int imx214_write_table(struct imx214 *imx214,
> + const struct reg_8 table[])
> +{
> + u8 vals[MAX_CMD];
> + int ret;
> + int i;
> +
> + for (table = table; table->addr != IMX214_TABLE_END ; table++) {
> + if (table->addr == IMX214_TABLE_WAIT_MS) {
> + usleep_range(table->val * 1000,
> + table->val * 1000 + 500);
> + continue;
> + }
> +
> + for (i = 0; i < MAX_CMD; i++) {
> + if (table[i].addr != (table[0].addr + i))
> + break;
> + vals[i] = table[i].val;
> + }
> +
> + ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
> +
> + if (ret) {
> + dev_err(imx214->dev, "write_table error: %d\n", ret);
> + return ret;
> + }
> +
> + table += i - 1;
> + }
> +
> + return 0;
> +}
> +
> +static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
> +{
> + struct imx214 *imx214 = to_imx214(subdev);
> + int ret;
> +
> + if (enable) {
> + int mode = imx214_find_mode(imx214->fmt.height);
> +
> + ret = imx214_write_table(imx214, mode_table_common);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent common table %d\n",
> + ret);
> + return ret;
> + }
> + ret = imx214_write_table(imx214, imx214_modes[mode].reg_table);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent mode table %d\n",
> + ret);
> + return ret;
> + }
> + ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sync v4l2 controls\n");
> + return ret;
> + }
> + ret = regmap_write(imx214->regmap, 0x100, 1);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent start table %d\n",
> + ret);
> + return ret;
> + }
> + } else {
> + ret = regmap_write(imx214->regmap, 0x100, 0);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent stop table %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_frame_interval *fival)
> +{
> + fival->pad = 0;
> + fival->interval.numerator = 1;
> + fival->interval.denominator = IMX214_FPS;
> +
> + return 0;
> +}
> +
> +static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_interval_enum *fie)
> +{
> + int mode;
> +
> + if (fie->index != 0)
> + return -EINVAL;
> +
> + mode = imx214_find_mode(fie->height);
> +
> + fie->code = IMX214_MBUS_CODE;
> + fie->width = imx214_modes[mode].width;
> + fie->height = imx214_modes[mode].height;
> + fie->interval.numerator = 1;
> + fie->interval.denominator = IMX214_FPS;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops imx214_video_ops = {
> + .s_stream = imx214_s_stream,
> + .g_frame_interval = imx214_g_frame_interval,
> + .s_frame_interval = imx214_g_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
> + .enum_mbus_code = imx214_enum_mbus_code,
> + .enum_frame_size = imx214_enum_frame_size,
> + .enum_frame_interval = imx214_enum_frame_interval,
> + .get_fmt = imx214_get_format,
> + .set_fmt = imx214_set_format,
> + .get_selection = imx214_get_selection,
> + .init_cfg = imx214_entity_init_cfg,
> +};
> +
> +static const struct v4l2_subdev_ops imx214_subdev_ops = {
> + .core = &imx214_core_ops,
> + .video = &imx214_video_ops,
> + .pad = &imx214_subdev_pad_ops,
> +};
> +
> +static const struct regmap_config sensor_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
> +{
> + int i;
> +
> + for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
> + imx214->supplies[i].supply = imx214_supply_name[i];
> +
> + return devm_regulator_bulk_get(dev,
> + IMX214_NUM_SUPPLIES,
> + imx214->supplies);
> +}
> +
> +static int imx214_parse_fwnode(struct device *dev)
> +{
> + struct fwnode_handle *endpoint;
> + struct v4l2_fwnode_endpoint *bus_cfg;
> + int i;
> + int ret = 0;
> +
> + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> + if (!endpoint) {
> + dev_err(dev, "endpoint node not found\n");
> + return -EINVAL;
> + }
> +
> + bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
> + if (IS_ERR(bus_cfg)) {
> + dev_err(dev, "parsing endpoint node failed\n");
> + return PTR_ERR(bus_cfg);
> + }
> +
> + if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {
> + dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
> + bus_cfg->bus_type, V4L2_MBUS_CSI2);
> + ret = -EINVAL;
> + goto done;
> + }
> +
> + for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)
> + if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
> + break;
> +
> + if (i == bus_cfg->nr_of_link_frequencies) {
> + dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
> + IMX214_DEFAULT_LINK_FREQ);
> + ret = -EINVAL;
> + goto done;
> + }
> +
> +done:
> + v4l2_fwnode_endpoint_free(bus_cfg);
> + fwnode_handle_put(endpoint);
> + return ret;
> +}
> +
> +static int imx214_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct imx214 *imx214;
> + int ret;
> + static const s64 link_freq[] = {
> + IMX214_DEFAULT_LINK_FREQ,
> + };
> +
> + ret = imx214_parse_fwnode(dev);
> + if (ret)
> + return ret;
> +
> + imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
> + if (!imx214)
> + return -ENOMEM;
> +
> + imx214->dev = dev;
> +
> + imx214->xclk = devm_clk_get(dev, NULL);
> + if (IS_ERR(imx214->xclk)) {
> + dev_err(dev, "could not get xclk");
> + return PTR_ERR(imx214->xclk);
> + }
> +
> + ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
> + if (ret) {
> + dev_err(dev, "could not set xclk frequency\n");
> + return ret;
> + }
> +
> + ret = imx214_get_regulators(dev, imx214);
> + if (ret < 0) {
> + dev_err(dev, "cannot get regulators\n");
> + return ret;
> + }
> +
> + imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(imx214->enable_gpio)) {
> + dev_err(dev, "cannot get enable gpio\n");
> + return PTR_ERR(imx214->enable_gpio);
> + }
> +
> + imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
> + if (IS_ERR(imx214->regmap)) {
> + dev_err(dev, "regmap init failed\n");
> + return PTR_ERR(imx214->regmap);
> + }
> +
> + v4l2_ctrl_handler_init(&imx214->ctrls, 2);
> +
> + imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
> + V4L2_CID_PIXEL_RATE, 0,
> + IMX214_DEFAULT_PIXEL_RATE, 1,
> + IMX214_DEFAULT_PIXEL_RATE);
> + imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
> + V4L2_CID_LINK_FREQ,
> + ARRAY_SIZE(link_freq) - 1,
> + 0, link_freq);
> + if (imx214->link_freq)
> + imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> + ret = imx214->ctrls.error;
> + if (ret) {
> + dev_err(&client->dev, "%s control init failed (%d)\n",
> + __func__, ret);
> + goto free_ctrl;
> + }
> +
> + imx214->sd.ctrl_handler = &imx214->ctrls;
> + ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
> + if (ret) {
> + dev_err(&client->dev,
> + "Error %d setting default controls\n", ret);
> + goto free_ctrl;
> + }
> +
> + v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
> + imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
> + imx214->sd.dev = &client->dev;
> + imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> + ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
> + if (ret < 0) {
> + dev_err(dev, "could not register media entity\n");
> + goto free_ctrl;
> + }
> +
> + imx214_entity_init_cfg(&imx214->sd, NULL);
> +
> + ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
> + if (ret < 0) {
> + dev_err(dev, "could not register v4l2 device\n");
> + goto free_entity;
> + }
> +
> + return 0;
> +
> +free_entity:
> + media_entity_cleanup(&imx214->sd.entity);
> +free_ctrl:
> + v4l2_ctrl_handler_free(&imx214->ctrls);
> +
> + return ret;
> +}
> +
> +static int imx214_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + v4l2_async_unregister_subdev(&imx214->sd);
> + media_entity_cleanup(&imx214->sd.entity);
> + v4l2_ctrl_handler_free(&imx214->ctrls);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id imx214_of_match[] = {
> + { .compatible = "sony,imx214" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, imx214_of_match);
> +
> +static struct i2c_driver imx214_i2c_driver = {
> + .driver = {
> + .of_match_table = imx214_of_match,
> + .name = "imx214",
> + },
> + .probe_new = imx214_probe,
> + .remove = imx214_remove,
> +};
> +
> +module_i2c_driver(imx214_i2c_driver);
> +
> +MODULE_DESCRIPTION("Sony IMX214 Camera drier");
> +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.19.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v4 2/2] [media] imx214: Add imx214 camera sensor driver
2018-10-03 7:29 [PATCH v4 2/2] [media] imx214: Add imx214 camera sensor driver Ricardo Ribalda Delgado
2018-10-03 7:54 ` jacopo mondi
@ 2018-10-03 11:29 ` Sakari Ailus
1 sibling, 0 replies; 3+ messages in thread
From: Sakari Ailus @ 2018-10-03 11:29 UTC (permalink / raw)
To: Ricardo Ribalda Delgado
Cc: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
linux-kernel, linux-media, jacopo
Hi Ricardo,
On Wed, Oct 03, 2018 at 09:29:05AM +0200, Ricardo Ribalda Delgado wrote:
> Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
> This is a camera sensor using the I2C bus for control and the
> CSI-2 bus for data.
>
> Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
How about adding that exposure control? And perhaps analogue and digital
gain as well.
I'd like to see the exposure control there because
1. it's needed for the driver to be actually usable and
2. it requires other non-trivial changes to the driver (runtime PM
or other arrangements to avoid accessing registers when the
power is off).
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-10-03 18:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-03 7:29 [PATCH v4 2/2] [media] imx214: Add imx214 camera sensor driver Ricardo Ribalda Delgado
2018-10-03 7:54 ` jacopo mondi
2018-10-03 11:29 ` Sakari Ailus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).