From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: kieran.bingham+renesas@ideasonboard.com,
laurent.pinchart+renesas@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se, geert@linux-m68k.org
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 00/18] media: gmsl: Reliability improvement
Date: Mon, 15 Mar 2021 14:14:54 +0100 [thread overview]
Message-ID: <20210315131512.133720-1-jacopo+renesas@jmondi.org> (raw)
Hello,
this series follows
https://patchwork.linuxtv.org/project/linux-media/list/?series=4650
Compared to the previous iteration the most substantial changes are
- max9271: Add a wakeup() function
- max9271: Add a patch to report errors from max9271_write()
- rdacm21: Re-work ov10640 initialization
Laurent spotted a mis-use of the SPWDN gpio signal. Fixing it an re-applying
the v1 patch that adds the correct delays to the power-up sequence fixes all
the ov10640 sporadic initialization errors \o/
Details in the commit message
- rdacm21: Increase OV490 firmware boot timeout. Details in the commit message.
- media: Propose de-depreaction of subdev init() core operation
- Squash max9286 and rdacm20/21 initialization sequence rework to maintain
bisectability as suggestd by Kieran and Laurent
- Drop i2c speed adjustment as it seems not to have any impact on reliability
Run more than 300 boot tests on the in-development version of the series.
The previous iteration fixed the failure rate down to 13% from the 25% of the
current mainline version.
This new iteration on which I run 80 boot tests gave me a single failure when
tested with RDACM21 and R8A77970 Eagle board \o/
Thanks
j
Jacopo Mondi (18):
media: i2c: rdamc21: Fix warning on u8 cast
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embedded 'serializer' field
media: i2c: rdacm20: Replace goto with a loop
media: i2c: rdacm20: Report camera module name
media: i2c: max9271: Check max9271_write() return
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9286: Adjust parameters indent
media: i2c: rdacm21: Fix OV10640 powerdown
media: i2c: rdacm21: Give more time to OV490 to boot
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Define high channel amplitude
media: v4l2-subdev: De-deprecate init() subdev op
media: gmsl: Reimplement initialization sequence
media: i2c: max9286: Rework comments in .bound()
drivers/media/i2c/max9271.c | 37 +++++++--
drivers/media/i2c/max9271.h | 9 ++
drivers/media/i2c/max9286.c | 61 ++++++++------
drivers/media/i2c/rdacm20.c | 160 ++++++++++++++++++++----------------
drivers/media/i2c/rdacm21.c | 74 ++++++++++-------
include/media/v4l2-subdev.h | 15 +++-
6 files changed, 223 insertions(+), 133 deletions(-)
--
2.30.0
next reply other threads:[~2021-03-15 13:15 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-15 13:14 Jacopo Mondi [this message]
2021-03-15 13:14 ` [PATCH v2 01/18] media: i2c: rdamc21: Fix warning on u8 cast Jacopo Mondi
2021-03-15 15:27 ` Kieran Bingham
2021-03-15 21:35 ` Laurent Pinchart
2021-03-15 13:14 ` [PATCH v2 02/18] media: i2c: rdacm20: Enable noise immunity Jacopo Mondi
2021-03-15 21:37 ` Laurent Pinchart
2021-03-16 12:56 ` Jacopo Mondi
2021-03-16 19:24 ` Laurent Pinchart
2021-03-15 13:14 ` [PATCH v2 03/18] media: i2c: rdacm20: Embedded 'serializer' field Jacopo Mondi
2021-03-15 15:29 ` Kieran Bingham
2021-03-15 13:14 ` [PATCH v2 04/18] media: i2c: rdacm20: Replace goto with a loop Jacopo Mondi
2021-03-15 15:36 ` Kieran Bingham
2021-03-15 13:14 ` [PATCH v2 05/18] media: i2c: rdacm20: Report camera module name Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 06/18] media: i2c: max9271: Check max9271_write() return Jacopo Mondi
2021-03-15 15:46 ` Kieran Bingham
2021-03-15 21:38 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 07/18] media: i2c: rdacm20: Check return values Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 08/18] media: i2c: rdacm20: Re-work ov10635 reset Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 09/18] media: i2c: max9271: Introduce wake_up() function Jacopo Mondi
2021-03-15 17:14 ` Kieran Bingham
2021-03-15 21:43 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 10/18] media: i2c: max9286: Adjust parameters indent Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 11/18] media: i2c: rdacm21: Fix OV10640 powerdown Jacopo Mondi
2021-03-15 17:20 ` Kieran Bingham
2021-03-15 21:45 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 12/18] media: i2c: rdacm21: Give more time to OV490 to boot Jacopo Mondi
2021-03-15 17:22 ` Kieran Bingham
2021-03-17 10:04 ` Jacopo Mondi
2021-03-19 0:29 ` Laurent Pinchart
2021-03-19 14:53 ` Jacopo Mondi
2021-03-15 21:52 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 13/18] media: i2c: max9286: Rename reverse_channel_mv Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 14/18] media: i2c: max9286: Cache channel amplitude Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 15/18] media: i2c: max9286: Define high " Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 16/18] media: v4l2-subdev: De-deprecate init() subdev op Jacopo Mondi
2021-03-15 21:56 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 17/18] media: gmsl: Reimplement initialization sequence Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 18/18] media: i2c: max9286: Rework comments in .bound() Jacopo Mondi
2021-03-15 17:28 ` Kieran Bingham
2021-03-15 21:57 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210315131512.133720-1-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=geert@linux-m68k.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).