From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: kieran.bingham+renesas@ideasonboard.com,
laurent.pinchart+renesas@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se, geert@linux-m68k.org
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH v2 03/18] media: i2c: rdacm20: Embedded 'serializer' field
Date: Mon, 15 Mar 2021 14:14:57 +0100 [thread overview]
Message-ID: <20210315131512.133720-4-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20210315131512.133720-1-jacopo+renesas@jmondi.org>
There's no reason to allocate dynamically the 'serializer' field in
the driver structure.
Embed the field and adjust all its users in the driver.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/media/i2c/rdacm20.c | 38 ++++++++++++++++---------------------
1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index f7fd5ae955d0..4d9bac87cba8 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -312,7 +312,7 @@ static const struct ov10635_reg {
struct rdacm20_device {
struct device *dev;
- struct max9271_device *serializer;
+ struct max9271_device serializer;
struct i2c_client *sensor;
struct v4l2_subdev sd;
struct media_pad pad;
@@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
{
struct rdacm20_device *dev = sd_to_rdacm20(sd);
- return max9271_set_serial_link(dev->serializer, enable);
+ return max9271_set_serial_link(&dev->serializer, enable);
}
static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
@@ -456,11 +456,11 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
int ret;
/* Verify communication with the MAX9271: ping to wakeup. */
- dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
- i2c_smbus_read_byte(dev->serializer->client);
+ dev->serializer.client->addr = MAX9271_DEFAULT_ADDR;
+ i2c_smbus_read_byte(dev->serializer.client);
/* Serial link disabled during config as it needs a valid pixel clock. */
- ret = max9271_set_serial_link(dev->serializer, false);
+ ret = max9271_set_serial_link(&dev->serializer, false);
if (ret)
return ret;
@@ -468,35 +468,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
* Ensure that we have a good link configuration before attempting to
* identify the device.
*/
- max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
- MAX9271_I2CSLVTO_1024US |
- MAX9271_I2CMSTBT_105KBPS);
+ max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+ MAX9271_I2CSLVTO_1024US |
+ MAX9271_I2CMSTBT_105KBPS);
- max9271_configure_gmsl_link(dev->serializer);
+ max9271_configure_gmsl_link(&dev->serializer);
- ret = max9271_verify_id(dev->serializer);
+ ret = max9271_verify_id(&dev->serializer);
if (ret < 0)
return ret;
- ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+ ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
if (ret < 0)
return ret;
- dev->serializer->client->addr = dev->addrs[0];
+ dev->serializer.client->addr = dev->addrs[0];
/*
* Reset the sensor by cycling the OV10635 reset signal connected to the
* MAX9271 GPIO1 and verify communication with the OV10635.
*/
- ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
- ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(10000, 15000);
- ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(10000, 15000);
@@ -560,13 +560,7 @@ static int rdacm20_probe(struct i2c_client *client)
if (!dev)
return -ENOMEM;
dev->dev = &client->dev;
-
- dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
- GFP_KERNEL);
- if (!dev->serializer)
- return -ENOMEM;
-
- dev->serializer->client = client;
+ dev->serializer.client = client;
ret = of_property_read_u32_array(client->dev.of_node, "reg",
dev->addrs, 2);
--
2.30.0
next prev parent reply other threads:[~2021-03-15 13:15 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-15 13:14 [PATCH v2 00/18] media: gmsl: Reliability improvement Jacopo Mondi
2021-03-15 13:14 ` [PATCH v2 01/18] media: i2c: rdamc21: Fix warning on u8 cast Jacopo Mondi
2021-03-15 15:27 ` Kieran Bingham
2021-03-15 21:35 ` Laurent Pinchart
2021-03-15 13:14 ` [PATCH v2 02/18] media: i2c: rdacm20: Enable noise immunity Jacopo Mondi
2021-03-15 21:37 ` Laurent Pinchart
2021-03-16 12:56 ` Jacopo Mondi
2021-03-16 19:24 ` Laurent Pinchart
2021-03-15 13:14 ` Jacopo Mondi [this message]
2021-03-15 15:29 ` [PATCH v2 03/18] media: i2c: rdacm20: Embedded 'serializer' field Kieran Bingham
2021-03-15 13:14 ` [PATCH v2 04/18] media: i2c: rdacm20: Replace goto with a loop Jacopo Mondi
2021-03-15 15:36 ` Kieran Bingham
2021-03-15 13:14 ` [PATCH v2 05/18] media: i2c: rdacm20: Report camera module name Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 06/18] media: i2c: max9271: Check max9271_write() return Jacopo Mondi
2021-03-15 15:46 ` Kieran Bingham
2021-03-15 21:38 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 07/18] media: i2c: rdacm20: Check return values Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 08/18] media: i2c: rdacm20: Re-work ov10635 reset Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 09/18] media: i2c: max9271: Introduce wake_up() function Jacopo Mondi
2021-03-15 17:14 ` Kieran Bingham
2021-03-15 21:43 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 10/18] media: i2c: max9286: Adjust parameters indent Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 11/18] media: i2c: rdacm21: Fix OV10640 powerdown Jacopo Mondi
2021-03-15 17:20 ` Kieran Bingham
2021-03-15 21:45 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 12/18] media: i2c: rdacm21: Give more time to OV490 to boot Jacopo Mondi
2021-03-15 17:22 ` Kieran Bingham
2021-03-17 10:04 ` Jacopo Mondi
2021-03-19 0:29 ` Laurent Pinchart
2021-03-19 14:53 ` Jacopo Mondi
2021-03-15 21:52 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 13/18] media: i2c: max9286: Rename reverse_channel_mv Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 14/18] media: i2c: max9286: Cache channel amplitude Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 15/18] media: i2c: max9286: Define high " Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 16/18] media: v4l2-subdev: De-deprecate init() subdev op Jacopo Mondi
2021-03-15 21:56 ` Laurent Pinchart
2021-03-15 13:15 ` [PATCH v2 17/18] media: gmsl: Reimplement initialization sequence Jacopo Mondi
2021-03-15 13:15 ` [PATCH v2 18/18] media: i2c: max9286: Rework comments in .bound() Jacopo Mondi
2021-03-15 17:28 ` Kieran Bingham
2021-03-15 21:57 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210315131512.133720-4-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=geert@linux-m68k.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).