[PATCH v2 09/35] media: ti-vpe: cal: Add CSI2 context

[Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>]

CAL has 8 CSI2 contexts per PHY, which are used to tag the incoming
data.  The current driver only uses the first context, but we need to
support all of them to implement multi-stream support.

Add a csi2_ctx field to cal_ctx, which indicates which of the 8 CSI2
contexts is used for the particular cal_ctx. Also clean up the context
register macros to take the CSI2 context number as a parameter.

Note that before this patch the CSI2 context used for both PHYs was
always 0. This patch always uses cal_ctx index number as the CSI2
context. There is no functional difference, but this approach will work
also in the future when we use more than 1 CSI2 context per PHY.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/media/platform/ti-vpe/cal.c      | 10 ++++++----
 drivers/media/platform/ti-vpe/cal.h      |  1 +
 drivers/media/platform/ti-vpe/cal_regs.h | 18 ++----------------
 3 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 6d6dce8001b2..98739f9200ff 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -294,7 +294,7 @@ static void cal_ctx_csi2_config(struct cal_ctx *ctx)
 {
 	u32 val;
 
-	val = cal_read(ctx->cal, CAL_CSI2_CTX0(ctx->index));
+	val = cal_read(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx));
 	cal_set_field(&val, ctx->cport, CAL_CSI2_CTX_CPORT_MASK);
 	/*
 	 * DT type: MIPI CSI-2 Specs
@@ -310,9 +310,10 @@ static void cal_ctx_csi2_config(struct cal_ctx *ctx)
 	cal_set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK);
 	cal_set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE,
 		      CAL_CSI2_CTX_PACK_MODE_MASK);
-	cal_write(ctx->cal, CAL_CSI2_CTX0(ctx->index), val);
-	ctx_dbg(3, ctx, "CAL_CSI2_CTX0(%d) = 0x%08x\n", ctx->index,
-		cal_read(ctx->cal, CAL_CSI2_CTX0(ctx->index)));
+	cal_write(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx), val);
+	ctx_dbg(3, ctx, "CAL_CSI2_CTX(%u, %u) = 0x%08x\n",
+		ctx->phy->instance, ctx->csi2_ctx,
+		cal_read(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx)));
 }
 
 static void cal_ctx_pix_proc_config(struct cal_ctx *ctx)
@@ -854,6 +855,7 @@ static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst)
 	ctx->cal = cal;
 	ctx->phy = cal->phy[inst];
 	ctx->index = inst;
+	ctx->csi2_ctx = inst;
 	ctx->cport = inst;
 
 	ret = cal_ctx_v4l2_init(ctx);
diff --git a/drivers/media/platform/ti-vpe/cal.h b/drivers/media/platform/ti-vpe/cal.h
index 251bb0ba7b3b..bcc3378b6b41 100644
--- a/drivers/media/platform/ti-vpe/cal.h
+++ b/drivers/media/platform/ti-vpe/cal.h
@@ -219,6 +219,7 @@ struct cal_ctx {
 	struct vb2_queue	vb_vidq;
 	u8			index;
 	u8			cport;
+	u8			csi2_ctx;
 };
 
 extern unsigned int cal_debug;
diff --git a/drivers/media/platform/ti-vpe/cal_regs.h b/drivers/media/platform/ti-vpe/cal_regs.h
index f752096dcf7f..bf937919a1e9 100644
--- a/drivers/media/platform/ti-vpe/cal_regs.h
+++ b/drivers/media/platform/ti-vpe/cal_regs.h
@@ -72,22 +72,8 @@
 #define CAL_CSI2_TIMING(m)		(0x314U + (m) * 0x80U)
 #define CAL_CSI2_VC_IRQENABLE(m)	(0x318U + (m) * 0x80U)
 #define CAL_CSI2_VC_IRQSTATUS(m)	(0x328U + (m) * 0x80U)
-#define CAL_CSI2_CTX0(m)		(0x330U + (m) * 0x80U)
-#define CAL_CSI2_CTX1(m)		(0x334U + (m) * 0x80U)
-#define CAL_CSI2_CTX2(m)		(0x338U + (m) * 0x80U)
-#define CAL_CSI2_CTX3(m)		(0x33cU + (m) * 0x80U)
-#define CAL_CSI2_CTX4(m)		(0x340U + (m) * 0x80U)
-#define CAL_CSI2_CTX5(m)		(0x344U + (m) * 0x80U)
-#define CAL_CSI2_CTX6(m)		(0x348U + (m) * 0x80U)
-#define CAL_CSI2_CTX7(m)		(0x34cU + (m) * 0x80U)
-#define CAL_CSI2_STATUS0(m)		(0x350U + (m) * 0x80U)
-#define CAL_CSI2_STATUS1(m)		(0x354U + (m) * 0x80U)
-#define CAL_CSI2_STATUS2(m)		(0x358U + (m) * 0x80U)
-#define CAL_CSI2_STATUS3(m)		(0x35cU + (m) * 0x80U)
-#define CAL_CSI2_STATUS4(m)		(0x360U + (m) * 0x80U)
-#define CAL_CSI2_STATUS5(m)		(0x364U + (m) * 0x80U)
-#define CAL_CSI2_STATUS6(m)		(0x368U + (m) * 0x80U)
-#define CAL_CSI2_STATUS7(m)		(0x36cU + (m) * 0x80U)
+#define CAL_CSI2_CTX(phy, csi2_ctx)	(0x330U + (phy) * 0x80U + (csi2_ctx) * 4)
+#define CAL_CSI2_STATUS(phy, csi2_ctx)	(0x350U + (phy) * 0x80U + (csi2_ctx) * 4)
 
 /* CAL CSI2 PHY register offsets */
 #define CAL_CSI2_PHY_REG0		0x000
-- 
2.25.1