linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Benoit Parrot <bparrot@ti.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Pratyush Yadav <p.yadav@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	linux-media@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: [PATCH v2 26/35] media: ti-vpe: cal: init ctx->v_fmt correctly in MC mode
Date: Tue, 20 Apr 2021 15:04:24 +0300	[thread overview]
Message-ID: <20210420120433.902394-27-tomi.valkeinen@ideasonboard.com> (raw)
In-Reply-To: <20210420120433.902394-1-tomi.valkeinen@ideasonboard.com>

CAL driver enumerates mbus codes in the connected subdev to create a
list of supported formats reported to userspace, and initializes
ctx->v_fmt and ctx->fmtinfo to one of those formats.

This works fine for legacy mode, but is not correct for MC mode, and the
list is not even used in MC mode.

Fix this by adding a new function, cal_ctx_v4l2_init_mc_format, which
only initializes ctx->v_fmt and ctx->fmtinfo to a default value.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/media/platform/ti-vpe/cal-video.c | 43 ++++++++++++++++++++---
 drivers/media/platform/ti-vpe/cal.h       |  2 +-
 2 files changed, 40 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal-video.c b/drivers/media/platform/ti-vpe/cal-video.c
index 6f1e8d257b5c..2c4b55124c2d 100644
--- a/drivers/media/platform/ti-vpe/cal-video.c
+++ b/drivers/media/platform/ti-vpe/cal-video.c
@@ -879,24 +879,59 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
 	return 0;
 }
 
+static int cal_ctx_v4l2_init_mc_format(struct cal_ctx *ctx)
+{
+	const struct cal_format_info *fmtinfo;
+	struct v4l2_pix_format *pix_fmt = &ctx->v_fmt.fmt.pix;
+
+	fmtinfo = cal_format_by_code(MEDIA_BUS_FMT_UYVY8_2X8);
+	if (!fmtinfo)
+		return -EINVAL;
+
+	pix_fmt->width = 640;
+	pix_fmt->height = 480;
+	pix_fmt->field = V4L2_FIELD_NONE;
+	pix_fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	pix_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601;
+	pix_fmt->quantization = V4L2_QUANTIZATION_LIM_RANGE;
+	pix_fmt->xfer_func = V4L2_XFER_FUNC_SRGB;
+	pix_fmt->pixelformat = fmtinfo->fourcc;
+
+	ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	/* Save current format */
+	cal_calc_format_size(ctx, fmtinfo, &ctx->v_fmt);
+	ctx->fmtinfo = fmtinfo;
+
+	return 0;
+}
+
 int cal_ctx_v4l2_register(struct cal_ctx *ctx)
 {
 	struct video_device *vfd = &ctx->vdev;
 	int ret;
 
-	ret = cal_ctx_v4l2_init_formats(ctx);
-	if (ret)
-		return ret;
-
 	if (!cal_mc_api) {
 		struct v4l2_ctrl_handler *hdl = &ctx->ctrl_handler;
 
+		ret = cal_ctx_v4l2_init_formats(ctx);
+		if (ret) {
+			ctx_err(ctx, "Failed to init formats: %d\n", ret);
+			return ret;
+		}
+
 		ret = v4l2_ctrl_add_handler(hdl, ctx->phy->source->ctrl_handler,
 					    NULL, true);
 		if (ret < 0) {
 			ctx_err(ctx, "Failed to add source ctrl handler\n");
 			return ret;
 		}
+	} else {
+		ret = cal_ctx_v4l2_init_mc_format(ctx);
+		if (ret) {
+			ctx_err(ctx, "Failed to init format: %d\n", ret);
+			return ret;
+		}
 	}
 
 	ret = video_register_device(vfd, VFL_TYPE_VIDEO, cal_video_nr);
diff --git a/drivers/media/platform/ti-vpe/cal.h b/drivers/media/platform/ti-vpe/cal.h
index def0c9a3657d..ee42c9c48fa1 100644
--- a/drivers/media/platform/ti-vpe/cal.h
+++ b/drivers/media/platform/ti-vpe/cal.h
@@ -213,7 +213,7 @@ struct cal_ctx {
 	/* Used to store current pixel format */
 	struct v4l2_format	v_fmt;
 
-	/* Current subdev enumerated format */
+	/* Current subdev enumerated format (legacy) */
 	const struct cal_format_info	**active_fmt;
 	unsigned int		num_active_fmt;
 
-- 
2.25.1


  parent reply	other threads:[~2021-04-20 12:05 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20 12:03 [PATCH v2 00/35] media: ti-vpe: cal: prepare for multistream support Tomi Valkeinen
2021-04-20 12:03 ` [PATCH v2 01/35] media: ti-vpe: cal: add g/s_parm for legacy API Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 02/35] media: ti-vpe: cal: fix error handling in cal_camerarx_create Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 03/35] media: ti-vpe: cal: remove unused cal_camerarx->dev field Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 04/35] media: ti-vpe: cal: rename "sensor" to "source" Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 05/35] media: ti-vpe: cal: move global config from cal_ctx_wr_dma_config to runtime resume Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 06/35] media: ti-vpe: cal: use v4l2_get_link_freq Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 07/35] media: ti-vpe: cal: add cal_ctx_prepare/unprepare Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 08/35] media: ti-vpe: cal: change index and cport to u8 Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 09/35] media: ti-vpe: cal: Add CSI2 context Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 10/35] media: ti-vpe: cal: Add pixel processing context Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 11/35] media: ti-vpe: cal: rename cal_ctx->index to dma_ctx Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 12/35] media: ti-vpe: cal: rename CAL_HL_IRQ_MASK Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 13/35] media: ti-vpe: cal: clean up CAL_CSI2_VC_IRQ_* macros Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 14/35] media: ti-vpe: cal: catch VC errors Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 15/35] media: ti-vpe: cal: remove wait when stopping camerarx Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 16/35] media: ti-vpe: cal: disable csi2 ctx and pix proc at ctx_stop Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 17/35] media: ti-vpe: cal: allocate pix proc dynamically Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 18/35] media: ti-vpe: cal: add 'use_pix_proc' field Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 19/35] media: ti-vpe: cal: add cal_ctx_wr_dma_enable and fix a race Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 20/35] media: ti-vpe: cal: add vc and datatype fields to cal_ctx Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 21/35] media: ti-vpe: cal: handle cal_ctx_v4l2_register error Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 22/35] media: ti-vpe: cal: set field always to V4L2_FIELD_NONE Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 23/35] media: ti-vpe: cal: fix typo in a comment Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 24/35] media: ti-vpe: cal: add mbus_code support to cal_mc_enum_fmt_vid_cap Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 25/35] media: ti-vpe: cal: rename non-MC funcs to cal_legacy_* Tomi Valkeinen
2021-04-20 12:04 ` Tomi Valkeinen [this message]
2021-04-20 12:04 ` [PATCH v2 27/35] media: ti-vpe: cal: remove cal_camerarx->fmtinfo Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 28/35] media: ti-vpe: cal: support 8 DMA contexts Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 29/35] media: ti-vpe: cal: cleanup phy iteration in cal_remove Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 30/35] media: ti-vpe: cal: fix ctx uninitialization Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 31/35] media: ti-vpe: cal: fix queuing of the initial buffer Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 32/35] media: ti-vpe: cal: use CSI-2 frame number Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 33/35] media: ti-vpe: cal: add camerarx locking Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 34/35] media: ti-vpe: cal: add camerarx enable/disable refcounting Tomi Valkeinen
2021-04-20 12:04 ` [PATCH v2 35/35] media: ti-vpe: cal: allow more than 1 source pads Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210420120433.902394-27-tomi.valkeinen@ideasonboard.com \
    --to=tomi.valkeinen@ideasonboard.com \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=p.yadav@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).