From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: martin.kepplinger@puri.sm, krzysztof.kozlowski@canonical.com,
laurent.pinchart@ideasonboard.com
Cc: devicetree@vger.kernel.org, kernel@puri.sm,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
mchehab@kernel.org, paul.kocialkowski@bootlin.com, pavel@ucw.cz,
phone-devel@vger.kernel.org, robh@kernel.org,
shawnx.tu@intel.com
Subject: [PATCH v6 0/5] Add support for the Hynix Hi-846 camera
Date: Mon, 28 Jun 2021 12:10:49 +0200 [thread overview]
Message-ID: <20210628101054.828579-1-martin.kepplinger@puri.sm> (raw)
hi,
This patchset adds support for the SK Hynix Hi-846 CMOS images sensor.
It includes dt-bindings and the driver.
Patches 4 and 5 are basically optional: if i2c-cardlist is deprecated,
ignore it and act on it appropriately, and the arm64 defconfig is just
convenience for now.
best wishes,
martin
revision history
----------------
v6:
* better digital gain defaults
* lane config fix found by smatch
* fix regulator usage in power_on()
v5: (thank you Laurent and Rob)
* minor dt-bindings fixes
* driver: disable lens shading correcting (no seed values yet used from "otp" for that)
* add reviewed-tags
* https://lore.kernel.org/linux-media/20210611101404.2553818-1-martin.kepplinger@puri.sm/
v4: (thank you Laurent, Sakari and Rob) many driver changes, see v3 review for
details. they include:
* add get_selection(), remove open() callback
* use gpiod API
* use regulator_bulk API
* fix power supply timing sequence and bindings
* https://lore.kernel.org/linux-media/20210607105213.1211722-1-martin.kepplinger@puri.sm/
v3: (thank you, Laurent)
* use do_div() for divisions
* reset-gpios DT property name instead of rst-gpios
* improve the dt-bindings
* add the phone-devel list
* https://lore.kernel.org/linux-media/20210531120737.168496-1-martin.kepplinger@puri.sm/
v2:
sent a bit early due to stupid mistakes
* fix build issues
* fix dtschema issues
* add enable for arm64 defconfig
* https://lore.kernel.org/linux-media/20210530212337.GA15366@duo.ucw.cz/T/#t
v1:
* https://lore.kernel.org/linux-media/20210527091221.3335998-1-martin.kepplinger@puri.sm/
Martin Kepplinger (5):
dt-bindings: vendor-prefixes: Add SK Hynix Inc.
dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel
sensor
media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera
Documentation: i2c-cardlist: add the Hynix hi846 sensor
arm64: defconfig: enable VIDEO_HI846
.../admin-guide/media/i2c-cardlist.rst | 1 +
.../bindings/media/i2c/hynix,hi846.yaml | 108 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
arch/arm64/configs/defconfig | 1 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/hi846.c | 2128 +++++++++++++++++
8 files changed, 2260 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
create mode 100644 drivers/media/i2c/hi846.c
--
2.30.2
next reply other threads:[~2021-06-28 10:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-28 10:10 Martin Kepplinger [this message]
2021-06-28 10:10 ` [PATCH v6 1/5] dt-bindings: vendor-prefixes: Add SK Hynix Inc Martin Kepplinger
2021-06-28 10:10 ` [PATCH v6 2/5] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor Martin Kepplinger
2021-06-28 10:10 ` [PATCH v6 3/5] media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera Martin Kepplinger
2021-07-08 12:54 ` Sakari Ailus
2021-07-08 12:57 ` Sakari Ailus
2021-06-28 10:10 ` [PATCH v6 4/5] Documentation: i2c-cardlist: add the Hynix hi846 sensor Martin Kepplinger
2021-06-28 10:10 ` [PATCH v6 5/5] arm64: defconfig: enable VIDEO_HI846 Martin Kepplinger
2021-07-08 13:00 ` Sakari Ailus
2021-07-08 15:13 ` Guido Günther
2021-07-08 15:34 ` Laurent Pinchart
2021-07-09 7:06 ` Guido Günther
2021-08-07 7:06 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210628101054.828579-1-martin.kepplinger@puri.sm \
--to=martin.kepplinger@puri.sm \
--cc=devicetree@vger.kernel.org \
--cc=kernel@puri.sm \
--cc=krzysztof.kozlowski@canonical.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=pavel@ucw.cz \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnx.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).