Build failed in Jenkins: media-build #2960

* Build failed in Jenkins: media-build #2960
@ 2020-02-07 12:19 Jenkins Builder Robot
  2020-02-07 13:08 ` Jenkins build is back to normal : media-build #2961 Jenkins Builder Robot
  0 siblings, 1 reply; 2+ messages in thread
From: Jenkins Builder Robot @ 2020-02-07 12:19 UTC (permalink / raw)
  To: mchehab, linux-media

See <https://builder.linuxtv.org/job/media-build/2960/display/redirect?page=changes>

Changes:

[hverkuil-cisco] Fix i2c_new_secondary_device compat code.

------------------------------------------
[...truncated 3.24 KB...]
HTTP request sent, awaiting response... 200 OK
Length: 105 [application/x-bzip2]
Saving to: ‘linux-media.tar.bz2.md5.tmp’

     0K                                                       100%  175M=0s

2020-02-07 12:18:23 (175 MB/s) - ‘linux-media.tar.bz2.md5.tmp’ saved [105/105]

make: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
make: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
tar xfj linux-media.tar.bz2
rm -f .patches_applied .linked_dir .git_log.md5
make: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
**********************************************************
* Downloading firmwares from linuxtv.org.                *
**********************************************************
firmware/dvb-usb-vp702x-01.fw
firmware/dvb-usb-vp7045-01.fw
firmware/dvb-fe-bcm3510-01.fw
firmware/as102_data2_st.hex
firmware/dvb-usb-terratec-h7-drxk.fw
firmware/isdbt_nova_12mhz.inp
firmware/Boot.S
firmware/dvb_nova_12mhz_b0.inp
firmware/dvb-fe-xc4000-1.4.1.fw
firmware/sms1xxx-hcw-55xxx-isdbt-02.fw
firmware/sms1xxx-nova-a-dvbt-01.fw
firmware/dvb-usb-avertv-a800-02.fw
firmware/cmmb_venice_12mhz.inp
firmware/dvb-fe-xc5000c-4.1.30.7.fw
firmware/v4l-cx23418-cpu.fw
firmware/v4l-cx23885-enc-broken.fw
firmware/dvb-fe-drxj-mc-vsb-1.0.8.fw
firmware/dvb_nova_12mhz.inp
firmware/dvb-usb-dib0700-1.20.fw
firmware/tdmb_nova_12mhz.inp
firmware/as102_data1_st.hex
firmware/dvb-fe-or51132-vsb.fw
firmware/dvb-usb-it9135-02.fw
firmware/v4l-cx23418-apu.fw
firmware/dvb-ttpci-01.fw-261f
firmware/v4l-cx23418-dig.fw
firmware/dvb-ttpci-01.fw-261c
firmware/dvb-usb-bluebird-01.fw
firmware/dvb-fe-or51211.fw
firmware/dvb-fe-or51132-qam.fw
firmware/sms1xxx-stellar-dvbt-01.fw
firmware/dvb-usb-dibusb-5.0.0.11.fw
firmware/dvb-fe-drxj-mc-vsb-qam-1.0.8.fw
firmware/dvb-usb-terratec-h5-drxk.fw
firmware/dvb-usb-wt220u-02.fw
firmware/v4l-cx23885-enc.fw
firmware/dvb-ttpci-01.fw-2622
firmware/dvb-usb-wt220u-01.fw
firmware/v4l-cx25840.fw
firmware/dvb-fe-drxj-mc-1.0.8.fw
firmware/v4l-cx231xx-avcore-01.fw
firmware/dvb-usb-dtt200u-01.fw
firmware/dvb-usb-dibusb-6.0.0.8.fw
firmware/sms1xxx-nova-b-dvbt-01.fw
firmware/dvb-fe-xc5000-1.6.114.fw
firmware/cmmb_vega_12mhz.inp
firmware/dvb-usb-it9135-01.fw
firmware/isdbt_nova_12mhz_b0.inp
firmware/dvb-ttpci-01.fw-261a
firmware/dvb-ttpci-01.fw-261b
firmware/dvb-ttpci-01.fw-261d
firmware/README
firmware/isdbt_rio.inp
firmware/dvb-usb-umt-010-02.fw
firmware/sms1xxx-hcw-55xxx-dvbt-02.fw
firmware/dvb-usb-terratec-h7-az6007.fw
firmware/v4l-cx23885-avcore-01.fw
******************
* Start building *
******************
make -C <https://builder.linuxtv.org/job/media-build/ws/v4l> allyesconfig
make[1]: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/v4l'>
make[2]: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
Applying patches for kernel 4.19.0-5-amd64
patch -s -f -N -p1 -i ../backports/api_version.patch
patch -s -f -N -p1 -i ../backports/pr_fmt.patch
patch -s -f -N -p1 -i ../backports/debug.patch
patch -s -f -N -p1 -i ../backports/drx39xxj.patch
patch -s -f -N -p1 -i ../backports/v5.5_alsa_pcm_api_updates.patch
patch -s -f -N -p1 -i ../backports/v5.1_vm_map_pages.patch
patch -s -f -N -p1 -i ../backports/v5.1_devm_i2c_new_dummy_device.patch
patch -s -f -N -p1 -i ../backports/v5.0_ipu3-cio2.patch
patch -s -f -N -p1 -i ../backports/v5.0_time32.patch
patch -s -f -N -p1 -i ../backports/v4.20_access_ok.patch
Patched drivers/media/dvb-core/dvbdev.c
Patched drivers/media/v4l2-core/v4l2-dev.c
Patched drivers/media/rc/rc-main.c
make[2]: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
./scripts/make_kconfig.pl /lib/modules/4.19.0-5-amd64/build /lib/modules/4.19.0-5-amd64/source 1
Preparing to compile for kernel version 4.19.0

***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.

If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.

Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:

cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install

Please see your distro's web site for instructions to build a new kernel.

WARNING: This is the V4L/DVB backport tree, with experimental drivers
	 backported to run on legacy kernels from the development tree at:
		http://git.linuxtv.org/media-tree.git.
	 It is generally safe to use it for testing a new driver or
	 feature, but its usage on production environments is risky.
	 Don't use it in production. You've been warned.
VIDEO_IPU3_CIO2: Requires at least kernel 9.255.255
VIDEO_OMAP3: Requires at least kernel 9.255.255
VIDEO_DW9714: Requires at least kernel 9.255.255
VIDEO_IPU3_IMGU: Requires at least kernel 9.255.255
Created default (all yes) .config file
./scripts/fix_kconfig.pl
make[1]: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/v4l'>
make -C <https://builder.linuxtv.org/job/media-build/ws/v4l> 
make[1]: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/v4l'>
./scripts/make_myconfig.pl
[ ! -f "./config-mycompat.h" ] && echo "/* empty config-mycompat.h */" > "./config-mycompat.h" || true
perl scripts/make_config_compat.pl /lib/modules/4.19.0-5-amd64/source ./.myconfig ./config-compat.h
creating symbolic links...
Kernel build directory is /lib/modules/4.19.0-5-amd64/build
make -C ../linux apply_patches
make[2]: Entering directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
Patches for 4.19.0-5-amd64 already applied.
make[2]: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/linux'>
make -C /lib/modules/4.19.0-5-amd64/build M=<https://builder.linuxtv.org/job/media-build/ws/v4l>  modules
make[2]: Entering directory '/usr/src/linux-headers-4.19.0-5-amd64'
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/msp3400-driver.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/msp3400-kthreads.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-core.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-regs.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-quirk.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-limits.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/et8ek8_mode.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/et8ek8_driver.o>
  CC [M]  <https://builder.linuxtv.org/job/media-build/ws/v4l/cx25840-core.o>
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/et8ek8_mode.o]> Error 1
make[5]: *** Waiting for unfinished jobs....
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-regs.o]> Error 1
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/msp3400-kthreads.o]> Error 1
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/msp3400-driver.o]> Error 1
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-limits.o]> Error 1
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-quirk.o]> Error 1
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/smiapp-core.o]> Error 1
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <command-line>:
<https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2731:34: error: static declaration of 'i2c_new_secondary_device' follows non-static declaration
 static inline struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from <https://builder.linuxtv.org/job/media-build/ws/v4l/compat.h>:2729,
                 from <command-line>:
/usr/src/linux-headers-4.19.0-5-common/include/linux/i2c.h:472:1: note: previous declaration of 'i2c_new_secondary_device' was here
 i2c_new_secondary_device(struct i2c_client *client,
 ^~~~~~~~~~~~~~~~~~~~~~~~
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/et8ek8_driver.o]> Error 1
make[5]: *** [/usr/src/linux-headers-4.19.0-5-common/scripts/Makefile.build:308: <https://builder.linuxtv.org/job/media-build/ws/v4l/cx25840-core.o]> Error 1
make[4]: *** [/usr/src/linux-headers-4.19.0-5-common/Makefile:1539: _module_<https://builder.linuxtv.org/job/media-build/ws/v4l]> Error 2
make[3]: *** [Makefile:146: sub-make] Error 2
make[2]: *** [Makefile:8: all] Error 2
make[2]: Leaving directory '/usr/src/linux-headers-4.19.0-5-amd64'
make[1]: *** [Makefile:53: default] Error 2
make[1]: Leaving directory '<https://builder.linuxtv.org/job/media-build/ws/v4l'>
make: *** [Makefile:26: all] Error 2
build failed at ./build line 526
Build step 'Execute shell' marked build as failure

^ permalink raw reply	[flat|nested] 2+ messages in thread