* dvb usb stick Hauppauge WinTV-soloHD
@ 2016-06-18 15:55 Thomas Stein
2016-06-18 16:56 ` Olli Salonen
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Stein @ 2016-06-18 15:55 UTC (permalink / raw)
To: linux-media
[-- Attachment #1: Type: text/plain, Size: 3063 bytes --]
Hello.
I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw
there is general support already in the kernel.
https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc
I'm able to use this device for dvb-t but not dvb-t2. I'm living in
berlin so it should work. w_scan is scanning dvb-t2 and seems
to find channels:
Scanning DVB-T2...
Scanning 7MHz frequencies...
177500: (time: 02:17.828)
184500: (time: 02:19.828)
191500: (time: 02:21.876)
198500: (time: 02:23.924)
205500: (time: 02:25.971)
212500: (time: 02:27.971)
219500: (time: 02:30.021)
226500: (time: 02:32.071)
Scanning 8MHz frequencies...
474000: (time: 02:34.120)
482000: (time: 02:36.121)
490000: (time: 02:38.169)
498000: (time: 02:40.219)
506000: skipped (already known transponder)
514000: (time: 02:42.268)
522000: skipped (already known transponder)
530000: (time: 02:44.318)
538000: (time: 02:46.368)
546000: (time: 02:48.417)
554000: (time: 02:50.417)
562000: (time: 02:52.467)
570000: skipped (already known transponder)
578000: (time: 02:54.467)
586000: (time: 02:56.469)
594000: (time: 02:58.469)
602000: (time: 03:00.518)
610000: (time: 03:02.567)
618000: skipped (already known transponder)
626000: (time: 03:04.617)
634000: (time: 03:06.617)
642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz
I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) :
updating transport_stream_id: -> (0:0:16481)
QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481)
: updating network_id -> (0:12352:16481)
QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
(0:12352:16481) : updating original_network_id -> (8468:12352:16481)
updating transponder:
(QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
(8468:12352:16481)) 0x0000
to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
(8468:12352:16481)) 0x4004
new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1
(8468:12352:16497)) 0x4004
650000: skipped (already known transponder)
658000: skipped (already known transponder)
666000: (time: 03:10.382)
674000: (time: 03:12.429)
682000: skipped (already known transponder)
690000: (time: 03:14.476)
698000: (time: 03:16.528)
706000: skipped (already known transponder)
714000: (time: 03:18.575)
722000: (time: 03:20.623)
730000: (time: 03:22.669)
738000: (time: 03:24.716)
746000: (time: 03:26.764)
754000: skipped (already known transponder)
762000: (time: 03:28.811)
770000: (time: 03:30.860)
778000: skipped (already known transponder)
786000: (time: 03:32.908)
794000: (time: 03:34.953)
802000: (time: 03:36.999)
810000: (time: 03:39.045)
818000: (time: 03:41.045)
826000: (time: 03:43.091)
834000: (time: 03:45.137)
842000: (time: 03:47.185)
850000: (time: 03:49.231)
858000: (time: 03:51.277)
So the question is, what is going wrong? When i start vlc with dvb-t2
channels file for berlin i get:
[00007f7e0c01a0e8] ts demux error: cannot peek
Any hints appreciated.
cheers
t.
[-- Attachment #2: 0xF5437AA0.asc --]
[-- Type: application/pgp-keys, Size: 5281 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb usb stick Hauppauge WinTV-soloHD
2016-06-18 15:55 dvb usb stick Hauppauge WinTV-soloHD Thomas Stein
@ 2016-06-18 16:56 ` Olli Salonen
2016-06-18 17:17 ` Thomas Stein
0 siblings, 1 reply; 6+ messages in thread
From: Olli Salonen @ 2016-06-18 16:56 UTC (permalink / raw)
To: Thomas Stein; +Cc: linux-media
Hi Thomas,
Please reboot your PC, run w_scan and then send the full output of
dmesg command. Maybe the driver has printed something in the logs that
can help us narrow the cause.
Cheers,
-olli
On 18 June 2016 at 18:55, Thomas Stein <himbeere@meine-oma.de> wrote:
> Hello.
>
> I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw
> there is general support already in the kernel.
> https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc
>
> I'm able to use this device for dvb-t but not dvb-t2. I'm living in berlin
> so it should work. w_scan is scanning dvb-t2 and seems
> to find channels:
>
> Scanning DVB-T2...
> Scanning 7MHz frequencies...
> 177500: (time: 02:17.828)
> 184500: (time: 02:19.828)
> 191500: (time: 02:21.876)
> 198500: (time: 02:23.924)
> 205500: (time: 02:25.971)
> 212500: (time: 02:27.971)
> 219500: (time: 02:30.021)
> 226500: (time: 02:32.071)
> Scanning 8MHz frequencies...
> 474000: (time: 02:34.120)
> 482000: (time: 02:36.121)
> 490000: (time: 02:38.169)
> 498000: (time: 02:40.219)
> 506000: skipped (already known transponder)
> 514000: (time: 02:42.268)
> 522000: skipped (already known transponder)
> 530000: (time: 02:44.318)
> 538000: (time: 02:46.368)
> 546000: (time: 02:48.417)
> 554000: (time: 02:50.417)
> 562000: (time: 02:52.467)
> 570000: skipped (already known transponder)
> 578000: (time: 02:54.467)
> 586000: (time: 02:56.469)
> 594000: (time: 02:58.469)
> 602000: (time: 03:00.518)
> 610000: (time: 03:02.567)
> 618000: skipped (already known transponder)
> 626000: (time: 03:04.617)
> 634000: (time: 03:06.617)
> 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz
> I999B8C999D999T999G999Y999P0 (0:0:0)
> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) :
> updating transport_stream_id: -> (0:0:16481)
> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481) :
> updating network_id -> (0:12352:16481)
> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16481)
> : updating original_network_id -> (8468:12352:16481)
> updating transponder:
> (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
> (8468:12352:16481)) 0x0000
> to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
> (8468:12352:16481)) 0x4004
> new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1
> (8468:12352:16497)) 0x4004
> 650000: skipped (already known transponder)
> 658000: skipped (already known transponder)
> 666000: (time: 03:10.382)
> 674000: (time: 03:12.429)
> 682000: skipped (already known transponder)
> 690000: (time: 03:14.476)
> 698000: (time: 03:16.528)
> 706000: skipped (already known transponder)
> 714000: (time: 03:18.575)
> 722000: (time: 03:20.623)
> 730000: (time: 03:22.669)
> 738000: (time: 03:24.716)
> 746000: (time: 03:26.764)
> 754000: skipped (already known transponder)
> 762000: (time: 03:28.811)
> 770000: (time: 03:30.860)
> 778000: skipped (already known transponder)
> 786000: (time: 03:32.908)
> 794000: (time: 03:34.953)
> 802000: (time: 03:36.999)
> 810000: (time: 03:39.045)
> 818000: (time: 03:41.045)
> 826000: (time: 03:43.091)
> 834000: (time: 03:45.137)
> 842000: (time: 03:47.185)
> 850000: (time: 03:49.231)
> 858000: (time: 03:51.277)
>
> So the question is, what is going wrong? When i start vlc with dvb-t2
> channels file for berlin i get:
>
> [00007f7e0c01a0e8] ts demux error: cannot peek
>
> Any hints appreciated.
>
> cheers
> t.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb usb stick Hauppauge WinTV-soloHD
2016-06-18 16:56 ` Olli Salonen
@ 2016-06-18 17:17 ` Thomas Stein
2016-06-22 19:10 ` Olli Salonen
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Stein @ 2016-06-18 17:17 UTC (permalink / raw)
To: linux-media
[-- Attachment #1: Type: text/plain, Size: 59133 bytes --]
Hi Olli.
Thanks for your answer.
Here we go.
[ 0.000000] Linux version 4.6.2 (root@rather) (gcc version 5.3.0
(Gentoo 5.3.0 p1.0, pie-0.6.5) ) #3 SMP Sat Jun 18 13:34:40 CEST 2016
[ 0.000000] Command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3 ro
net.ifnames=0
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce20ffff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce210000-0x00000000dcd3efff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dfa0ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff]
usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20A7005MGE/20A7005MGE, BIOS GRET46WW (1.23 )
11/04/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC-
WT
[ 0.000000] e820: last_pfn = 0xce210 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped
at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size
24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE
[ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE
[ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE
[ 0.000000] BRK [0x02104000, 0x02104fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DCEFE170 0000C4 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DCEDF000 013476 (v01 LENOVO TP-GR
00001230 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DCE6A000 000040
[ 0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GR
00001230 PTEC 00000001)
[ 0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1
00000100 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2
00000200 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDE000 0009CB (v01 LENOVO SataAhci
00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDD000 0007F5 (v01 LENOVO Cpu0Ist
00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDC000 000AD8 (v01 LENOVO CpuPm
00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCEDA000 00125C (v01 LENOVO SaSsdt
00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000DCED9000 000042 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: MSDM 0x00000000DCE44000 000055 (v03 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: BATB 0x00000000DCED8000 000046 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DCED7000 000064 (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DCED6000 0002CE (v01 LENOVO TP-GR
00001230 PTEC 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCED5000 00047F (v01 LENOVO IsctTabl
00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce20ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000021f5fffff]
[ 0.000000] On node 0 totalpages: 2021292
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13129 pages used for memmap
[ 0.000000] DMA32 zone: 840208 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at
0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce210000-0xdcd3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdfa0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa10000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa10000-0xf7ffffff] available for PCI
devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff88021f200000 s91288
r8192 d31592 u262144
[ 0.000000] pcpu-alloc: s91288 r8192 d31592 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1989686
[ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-4.6.2
root=/dev/sda3 ro net.ifnames=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.000000] Memory: 7861144K/8085168K available (8993K kernel code,
1099K rwdata, 2768K rodata, 1084K init, 844K bss, 224024K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:4352 nr_irqs:760 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.638 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4589.27 BogoMIPS (lpj=2294638)
[ 0.000196] pid_max: default: 32768 minimum: 301
[ 0.000292] ACPI: Core revision 20160108
[ 0.021433] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.021689] Security Framework initialized
[ 0.021789] Mount-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.021890] Mountpoint-cache hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.022281] CPU: Physical Processor ID: 0
[ 0.022373] CPU: Processor Core ID: 0
[ 0.022467] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022564] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.022676] mce: CPU supports 7 MCE banks
[ 0.022783] CPU0: Thermal monitoring enabled (TM1)
[ 0.022887] process: using mwait in idle threads
[ 0.022983] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.023080] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024,
1GB 4
[ 0.023758] Freeing SMP alternatives memory: 36K (ffffffff82023000 -
ffffffff8202c000)
[ 0.032425] smpboot: Max logical packages: 4
[ 0.032521] smpboot: APIC(0) Converting physical 0 to logical package
0
[ 0.033235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.043337] TSC deadline timer enabled
[ 0.043341] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
(family: 0x6, model: 0x45, stepping: 0x1)
[ 0.043632] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell
events, full-width counters, Intel PMU driver.
[ 0.044008] ... version: 3
[ 0.044102] ... bit width: 48
[ 0.044194] ... generic registers: 4
[ 0.044287] ... value mask: 0000ffffffffffff
[ 0.044384] ... max period: 0000ffffffffffff
[ 0.044481] ... fixed-purpose events: 3
[ 0.044573] ... event mask: 000000070000000f
[ 0.045021] x86: Booting SMP configuration:
[ 0.046155] .... node #0, CPUs: #1 #2 #3
[ 0.232523] x86: Booted up 1 node, 4 CPUs
[ 0.232705] smpboot: Total of 4 processors activated (18376.56
BogoMIPS)
[ 0.238513] devtmpfs: initialized
[ 0.238861] PM: Registering ACPI NVS region [mem
0xdcd3f000-0xdce7efff] (1310720 bytes)
[ 0.239128] kworker/u16:0 (29) used greatest stack depth: 14280 bytes
left
[ 0.239130] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.239257] RTC time: 19:01:15, date: 06/18/16
[ 0.239394] NET: Registered protocol family 16
[ 0.244260] cpuidle: using governor ladder
[ 0.250272] cpuidle: using governor menu
[ 0.250438] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.250584] ACPI: bus type PCI registered
[ 0.250845] PCI: Using configuration type 1 for base access
[ 0.250990] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is
on
[ 0.254230] kworker/u16:2 (278) used greatest stack depth: 14184
bytes left
[ 0.254429] kworker/u16:1 (290) used greatest stack depth: 14160
bytes left
[ 0.259563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.259852] ACPI: Added _OSI(Module Device)
[ 0.259948] ACPI: Added _OSI(Processor Device)
[ 0.260043] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.260139] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.260523] ACPI : EC: EC description table is found, configuring
boot EC
[ 0.260640] ACPI : EC: EC started
[ 0.268034] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.270402] ACPI: Dynamic OEM Table Load:
[ 0.270590] ACPI: SSDT 0xFFFF880215F52800 000436 (v01 PmRef Cpu0Cst
00003001 INTL 20120711)
[ 0.271758] ACPI: Dynamic OEM Table Load:
[ 0.271943] ACPI: SSDT 0xFFFF880215F53000 0005AA (v01 PmRef ApIst
00003000 INTL 20120711)
[ 0.273168] ACPI: Dynamic OEM Table Load:
[ 0.273351] ACPI: SSDT 0xFFFF8800C9F61800 000119 (v01 PmRef ApCst
00003000 INTL 20120711)
[ 0.275037] ACPI: Interpreter enabled
[ 0.275160] ACPI: (supports S0 S3 S4 S5)
[ 0.275255] ACPI: Using IOAPIC for interrupt routing
[ 0.275385] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.278879] ACPI: Power Resource [PUBS] (on)
[ 0.284147] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.284743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[ 0.285327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.285914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.286499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.287066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
*0, disabled.
[ 0.287777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.288359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
[ 0.288961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.289067] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments
MSI]
[ 0.289241] acpi PNP0A08:00: _OSC: not requesting OS control; OS
requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.289450] PCI host bridge to bus 0000:00
[ 0.289547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
window]
[ 0.289653] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
window]
[ 0.289756] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.289900] pci_bus 0000:00: root bus resource [mem
0xdfa00000-0xfebfffff window]
[ 0.290045] pci_bus 0000:00: root bus resource [mem
0xfed40000-0xfed4bfff window]
[ 0.290190] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.290295] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.290406] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.290423] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff
64bit]
[ 0.290432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.290438] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.290540] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.290551] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff
64bit]
[ 0.290680] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.290699] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff
64bit]
[ 0.290766] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.290805] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.290951] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.290970] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f
64bit]
[ 0.291039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.291123] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
[ 0.291139] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[ 0.291148] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
[ 0.291157] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.291218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.291256] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.291402] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.291418] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff
64bit]
[ 0.291488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.291568] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[ 0.291644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.291781] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[ 0.291858] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.291936] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.292088] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.292108] pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
[ 0.292202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.292242] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.292387] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.292578] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.292593] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 0.292601] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
[ 0.292609] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 0.292617] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
[ 0.292625] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.292634] pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff]
[ 0.292677] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.292752] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.292767] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff
64bit]
[ 0.292789] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.292925] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.293235] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[ 0.293319] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff
64bit]
[ 0.293685] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.295818] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.295919] pci 0000:00:1c.1: bridge window [mem
0xf0400000-0xf04fffff]
[ 0.295938] pci_bus 0000:00: on NUMA node 0
[ 0.296986] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.297271] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data =
0x62
[ 0.297481] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.297582] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.297734] vgaarb: loaded
[ 0.297825] vgaarb: bridge control possible 0000:00:02.0
[ 0.298025] SCSI subsystem initialized
[ 0.298181] libata version 3.00 loaded.
[ 0.298196] ACPI: bus type USB registered
[ 0.298327] usbcore: registered new interface driver usbfs
[ 0.298446] usbcore: registered new interface driver hub
[ 0.298571] usbcore: registered new device driver usb
[ 0.298708] Linux video capture interface: v2.00
[ 0.298844] pps_core: LinuxPPS API ver. 1 registered
[ 0.298942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.299097] PTP clock support registered
[ 0.299269] Advanced Linux Sound Architecture Driver Initialized.
[ 0.299386] PCI: Using ACPI for IRQ routing
[ 0.299513] PCI: pci_cache_line_size set to 64 bytes
[ 0.299823] Expanded resource reserved due to conflict with PCI Bus
0000:00
[ 0.299925] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.299928] e820: reserve RAM buffer [mem 0xce210000-0xcfffffff]
[ 0.299930] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.300102] Bluetooth: Core ver 2.21
[ 0.300204] NET: Registered protocol family 31
[ 0.300300] Bluetooth: HCI device and connection manager initialized
[ 0.300401] Bluetooth: HCI socket layer initialized
[ 0.300500] Bluetooth: L2CAP socket layer initialized
[ 0.300601] Bluetooth: SCO socket layer initialized
[ 0.300834] NetLabel: Initializing
[ 0.300930] NetLabel: domain hash size = 128
[ 0.301023] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.301135] NetLabel: unlabeled traffic allowed by default
[ 0.301332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.301794] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.303929] clocksource: Switched to clocksource hpet
[ 0.310841] VFS: Disk quotas dquot_6.6.0
[ 0.310968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.311222] pnp: PnP ACPI init
[ 0.311820] system 00:00: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.311936] system 00:00: [mem 0x000c0000-0x000c3fff] could not be
reserved
[ 0.312037] system 00:00: [mem 0x000c4000-0x000c7fff] could not be
reserved
[ 0.312138] system 00:00: [mem 0x000c8000-0x000cbfff] could not be
reserved
[ 0.312239] system 00:00: [mem 0x000cc000-0x000cffff] could not be
reserved
[ 0.312340] system 00:00: [mem 0x000d0000-0x000d3fff] has been
reserved
[ 0.312441] system 00:00: [mem 0x000d4000-0x000d7fff] has been
reserved
[ 0.312541] system 00:00: [mem 0x000d8000-0x000dbfff] has been
reserved
[ 0.312641] system 00:00: [mem 0x000dc000-0x000dffff] has been
reserved
[ 0.312741] system 00:00: [mem 0x000e0000-0x000e3fff] could not be
reserved
[ 0.312842] system 00:00: [mem 0x000e4000-0x000e7fff] could not be
reserved
[ 0.312952] system 00:00: [mem 0x000e8000-0x000ebfff] could not be
reserved
[ 0.313053] system 00:00: [mem 0x000ec000-0x000effff] could not be
reserved
[ 0.313154] system 00:00: [mem 0x000f0000-0x000fffff] could not be
reserved
[ 0.313255] system 00:00: [mem 0x00100000-0xdf9fffff] could not be
reserved
[ 0.313356] system 00:00: [mem 0xfec00000-0xffffffff] could not be
reserved
[ 0.313461] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.313610] pnp 00:01: [Firmware Bug]: PNP resource [mem
0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH;
extending to [mem 0xfed10000-0xfed17fff]
[ 0.313842] system 00:01: [io 0x1800-0x189f] could not be reserved
[ 0.313955] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.314055] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.314154] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.314253] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.314352] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.314450] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.314549] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.314647] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.314746] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.314844] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.314951] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.315051] system 00:01: [mem 0xf8000000-0xfbffffff] has been
reserved
[ 0.315153] system 00:01: [mem 0x00000000-0x00000fff] could not be
reserved
[ 0.315254] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been
reserved
[ 0.315354] system 00:01: [mem 0xfed10000-0xfed17fff] has been
reserved
[ 0.315455] system 00:01: [mem 0xfed18000-0xfed18fff] has been
reserved
[ 0.315555] system 00:01: [mem 0xfed19000-0xfed19fff] has been
reserved
[ 0.315655] system 00:01: [mem 0xfed45000-0xfed4bfff] has been
reserved
[ 0.315756] system 00:01: [mem 0xfed40000-0xfed44fff] has been
reserved
[ 0.315858] system 00:01: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.315937] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.315968] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303
(active)
[ 0.315995] pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13
(active)
[ 0.316527] system 00:05: [mem 0xfe106000-0xfe106fff] has been
reserved
[ 0.316631] system 00:05: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.316683] pnp: PnP ACPI: found 6 devices
[ 0.323875] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.324057] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to
[bus 02] add_size 1000
[ 0.324061] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align
100000
[ 0.324064] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.324079] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.324081] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x002fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.324084] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.324086] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit
pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.324088] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff]
res_to_dev_res add_size 1000 min_align 1000
[ 0.324091] pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff]
res_to_dev_res add_size 1000 min_align 1000
[ 0.324096] pci 0000:00:1c.0: BAR 8: assigned [mem
0xdfb00000-0xdfcfffff]
[ 0.324203] pci 0000:00:1c.0: BAR 9: assigned [mem
0xdfd00000-0xdfefffff 64bit pref]
[ 0.324351] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.324453] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.324552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.324654] pci 0000:00:1c.0: bridge window [mem
0xdfb00000-0xdfcfffff]
[ 0.324758] pci 0000:00:1c.0: bridge window [mem
0xdfd00000-0xdfefffff 64bit pref]
[ 0.324908] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.325017] pci 0000:00:1c.1: bridge window [mem
0xf0400000-0xf04fffff]
[ 0.325126] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.325128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.325131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.325133] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff
window]
[ 0.325135] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff
window]
[ 0.325137] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.325139] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
[ 0.325141] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff
64bit pref]
[ 0.325143] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.325183] NET: Registered protocol family 2
[ 0.325470] TCP established hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.325725] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 0.325988] TCP: Hash tables configured (established 65536 bind
65536)
[ 0.326114] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.326238] UDP-Lite hash table entries: 4096 (order: 5, 131072
bytes)
[ 0.326419] NET: Registered protocol family 1
[ 0.326594] RPC: Registered named UNIX socket transport module.
[ 0.326696] RPC: Registered udp transport module.
[ 0.326790] RPC: Registered tcp transport module.
[ 0.326885] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.327064] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.327700] PCI: CLS 64 bytes, default 64
[ 0.327729] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.327832] software IO TLB [mem 0xca210000-0xce210000] (64MB) mapped
at [ffff8800ca210000-ffff8800ce20ffff]
[ 0.328082] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters,
655360 ms ovfl timer
[ 0.329310] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.329408] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.329504] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.329601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.330119] Scanning for low memory corruption every 60 seconds
[ 0.330598] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.330737] audit: initializing netlink subsys (disabled)
[ 0.330844] audit: type=2000 audit(1466276474.314:1): initialized
[ 0.331567] workingset: timestamp_bits=60 max_order=21 bucket_order=0
[ 0.335140] NFS: Registering the id_resolver key type
[ 0.335246] Key type id_resolver registered
[ 0.335342] Key type id_legacy registered
[ 0.335501] fuse init (API version 7.24)
[ 0.336731] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 0.336885] io scheduler noop registered
[ 0.337038] io scheduler deadline registered
[ 0.337177] io scheduler cfq registered (default)
[ 0.337649] intel_idle: MWAIT substates: 0x11142120
[ 0.337652] intel_idle: v0.4.1 model 0x45
[ 0.337924] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.338106] ACPI: AC Adapter [AC] (on-line)
[ 0.338281] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.338560] ACPI: Lid Switch [LID]
[ 0.338697] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.338852] ACPI: Sleep Button [SLPB]
[ 0.339076] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.339229] ACPI: Power Button [PWRF]
[ 0.340623] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.340724] ACPI: Thermal Zone [THM0] (45 C)
[ 0.340893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.341643] Non-volatile memory driver v1.3
[ 0.341812] Linux agpgart interface v0.103
[ 0.341990] [drm] Initialized drm 1.1.0 20060810
[ 0.342731] [drm] Memory usable by graphics device = 2048M
[ 0.342883] [drm] Replacing VGA console driver
[ 0.344095] Console: switching to colour dummy device 80x25
[ 0.349322] ACPI: Battery Slot [BAT0] (battery present)
[ 0.350072] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 0.350078] [drm] Driver supports precise vblank timestamp query.
[ 0.350404] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.389347] ACPI: Video Device [VID] (multi-head: yes rom: no post:
no)
[ 0.389938] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.389997] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on
minor 0
[ 0.391982] loop: module loaded
[ 0.392110] ahci 0000:00:1f.2: version 3.0
[ 0.402379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps
0x1 impl SATA mode
[ 0.402393] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio
slum part deso sadm sds apst
[ 0.402925] scsi host0: ahci
[ 0.403073] scsi host1: ahci
[ 0.403179] scsi host2: ahci
[ 0.403233] ata1: SATA max UDMA/133 abar m2048@0xf053c000 port
0xf053c100 irq 41
[ 0.403240] ata2: DUMMY
[ 0.403244] ata3: DUMMY
[ 0.403383] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[ 0.403389] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.403412] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.403417] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.403584] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 0.566997] fbcon: inteldrmfb (fb0) is primary device
[ 0.706983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.719971] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
succeeded
[ 0.719974] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 0.722129] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
succeeded
[ 0.727893] ata1.00: supports DRM functions and may not be fully
accessible
[ 0.730026] ata1.00: ATA-9: INTEL SSDSCKGF180A4L, LSTi, max UDMA/133
[ 0.730029] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 0.750022] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
succeeded
[ 0.750024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 0.752120] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
succeeded
[ 0.757897] ata1.00: supports DRM functions and may not be fully
accessible
[ 0.767970] ata1.00: configured for UDMA/133
[ 0.826761] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.826763] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
54:ee:75:07:92:a9
[ 0.826764] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
Connection
[ 0.826801] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
1000FF-0FF
[ 0.826834] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.3.0-k
[ 0.826834] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.826858] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
version 2.0.2-k
[ 0.826858] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.826973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.826976] ehci-pci: EHCI PCI platform driver
[ 0.827128] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.827182] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 0.827195] ehci-pci 0000:00:1d.0: debug port 2
[ 0.831108] ehci-pci 0000:00:1d.0: cache line size of 64 is not
supported
[ 0.831122] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000
[ 0.837021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.837071] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 0.837072] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.837074] usb usb1: Product: EHCI Host Controller
[ 0.837075] usb usb1: Manufacturer: Linux 4.6.2 ehci_hcd
[ 0.837076] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.837271] hub 1-0:1.0: USB hub found
[ 0.837279] hub 1-0:1.0: 3 ports detected
[ 0.837469] ehci-platform: EHCI generic platform driver
[ 0.837496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.837512] ohci-pci: OHCI PCI platform driver
[ 0.837537] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.837680] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.837736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 0.838822] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x100 quirks 0x0004b810
[ 0.838827] xhci_hcd 0000:00:14.0: cache line size of 64 is not
supported
[ 0.838910] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 0.838911] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.838912] usb usb2: Product: xHCI Host Controller
[ 0.838913] usb usb2: Manufacturer: Linux 4.6.2 xhci-hcd
[ 0.838914] usb usb2: SerialNumber: 0000:00:14.0
[ 0.839063] hub 2-0:1.0: USB hub found
[ 0.839077] hub 2-0:1.0: 9 ports detected
[ 0.841021] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.841068] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 3
[ 0.841107] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0003
[ 0.841108] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.841110] usb usb3: Product: xHCI Host Controller
[ 0.841111] usb usb3: Manufacturer: Linux 4.6.2 xhci-hcd
[ 0.841112] usb usb3: SerialNumber: 0000:00:14.0
[ 0.841243] hub 3-0:1.0: USB hub found
[ 0.841254] hub 3-0:1.0: 4 ports detected
[ 0.842267] usbcore: registered new interface driver usblp
[ 0.842305] usbcore: registered new interface driver usb-storage
[ 0.842355] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 0.844196] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844200] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.844360] mousedev: PS/2 mouse device common for all mice
[ 0.844656] rtc_cmos 00:02: RTC can wake from S4
[ 0.844821] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.844848] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 0.845003] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.845876] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 0.846822] IR NEC protocol handler initialized
[ 0.846826] IR RC5(x/sz) protocol handler initialized
[ 0.846829] IR RC6 protocol handler initialized
[ 0.846833] IR JVC protocol handler initialized
[ 0.846836] IR Sony protocol handler initialized
[ 0.846840] IR SANYO protocol handler initialized
[ 0.846843] IR Sharp protocol handler initialized
[ 0.846847] IR MCE Keyboard/mouse protocol handler initialized
[ 0.846850] IR XMP protocol handler initialized
[ 0.846875] usbcore: registered new interface driver uvcvideo
[ 0.846876] USB Video Class driver (1.1.1)
[ 0.847024] Bluetooth: HCI UART driver ver 2.3
[ 0.847026] Bluetooth: HCI UART protocol H4 registered
[ 0.847026] Bluetooth: HCI UART protocol BCSP registered
[ 0.847027] Bluetooth: HCI UART protocol LL registered
[ 0.847028] Bluetooth: HCI UART protocol ATH3K registered
[ 0.847028] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 0.847048] usbcore: registered new interface driver btusb
[ 0.847088] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.847332] usbcore: registered new interface driver usbhid
[ 0.847333] usbhid: USB HID core driver
[ 0.847613] Netfilter messages via NETLINK v0.30.
[ 0.847630] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 0.847986] Initializing XFRM netlink socket
[ 0.847994] NET: Registered protocol family 17
[ 0.848034] Bluetooth: RFCOMM TTY layer initialized
[ 0.848037] Bluetooth: RFCOMM socket layer initialized
[ 0.848041] Bluetooth: RFCOMM ver 1.11
[ 0.848048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.848052] Bluetooth: HIDP socket layer initialized
[ 0.848083] Key type dns_resolver registered
[ 0.848373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.848382] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.848394] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.848404] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.848441] microcode: Microcode Update Driver: v2.01
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.848652] registered taskstats version 1
[ 0.849234] Magic number: 4:330:41
[ 0.849250] bdi 7:6: hash matches
[ 1.139039] usb 1-1: new high-speed USB device number 2 using
ehci-pci
[ 1.194038] usb 2-4: new high-speed USB device number 2 using
xhci_hcd
[ 1.253766] usb 1-1: New USB device found, idVendor=8087,
idProduct=8000
[ 1.253768] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.254036] hub 1-1:1.0: USB hub found
[ 1.254260] hub 1-1:1.0: 8 ports detected
[ 1.329990] psmouse serio1: synaptics: queried max coordinates: x
[..5112], y [..3834]
[ 1.330000] tsc: Refined TSC clocksource calibration: 2294.686 MHz
[ 1.330002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x211399552f8, max_idle_ns: 440795292447 ns
[ 1.363006] psmouse serio1: synaptics: queried min coordinates: x
[1024..], y [1024..]
[ 1.363011] psmouse serio1: synaptics: quirked min/max coordinates: x
[1024..5112], y [2024..4832]
[ 1.365412] usb 2-4: New USB device found, idVendor=1199,
idProduct=a001
[ 1.365414] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.365415] usb 2-4: Product: Sierra Wireless EM7345 4G LTE
[ 1.365417] usb 2-4: Manufacturer: Sierra Wireless Inc.
[ 1.365418] usb 2-4: SerialNumber: 013937000496677
[ 1.425952] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1,
id: 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw
id: 1545510
[ 1.425980] psmouse serio1: synaptics: serio: Synaptics pass-through
port at isa0060/serio1/input0
[ 1.467198] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input6
[ 1.530046] usb 1-1.8: new high-speed USB device number 3 using
ehci-pci
[ 1.530963] usb 2-6: new full-speed USB device number 3 using
xhci_hcd
[ 1.640531] usb 1-1.8: New USB device found, idVendor=04f2,
idProduct=b3f5
[ 1.640534] usb 1-1.8: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 1.640535] usb 1-1.8: Product: Integrated Camera
[ 1.640536] usb 1-1.8: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.640537] usb 1-1.8: SerialNumber: 0x0001
[ 1.642187] uvcvideo: Found UVC 1.00 device Integrated Camera
(04f2:b3f5)
[ 1.643866] input: Integrated Camera as
/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input8
[ 1.697658] usb 2-6: New USB device found, idVendor=138a,
idProduct=0017
[ 1.697660] usb 2-6: New USB device strings: Mfr=0, Product=0,
SerialNumber=1
[ 1.697661] usb 2-6: SerialNumber: 78916408f2b4
[ 1.851001] usb 2-7: new full-speed USB device number 4 using
xhci_hcd
[ 2.002995] Console: switching to colour frame buffer device 320x90
[ 2.016156] usb 2-7: New USB device found, idVendor=8087,
idProduct=07dc
[ 2.016159] usb 2-7: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.029636] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 2.029651] bluetooth hci0: Direct firmware load for
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq failed with error -2
[ 2.029653] Bluetooth: hci0 failed to open Intel firmware file:
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2)
[ 2.029661] bluetooth hci0: Direct firmware load for
intel/ibt-hw-37.7.bseq failed with error -2
[ 2.029662] Bluetooth: hci0 failed to open default Intel fw file:
intel/ibt-hw-37.7.bseq
[ 2.117813] psmouse serio2: trackpoint: IBM TrackPoint firmware:
0x0e, buttons: 3/3
[ 2.162388] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.164476] console [netcon0] enabled
[ 2.166461] netconsole: network logging started
[ 2.169571] PM: Hibernation image not present or could not be loaded.
[ 2.169576] ALSA device list:
[ 2.171571] No soundcards found.
[ 2.175327] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSCKGF18
LSTi PQ: 0 ANSI: 5
[ 2.190402] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180
GB/168 GiB)
[ 2.190411] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.196003] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.199406] sd 0:0:0:0: [sda] Write Protect is off
[ 2.202721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.202761] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.208859] sda: sda1 sda2 sda3
[ 2.210887] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.330247] clocksource: Switched to clocksource tsc
[ 2.334213] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input7
[ 2.416442] EXT4-fs (sda3): couldn't mount as ext3 due to feature
incompatibilities
[ 2.425152] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.426963] VFS: Mounted root (ext4 filesystem) readonly on device
8:3.
[ 2.428912] devtmpfs: mounted
[ 2.431403] Freeing unused kernel memory: 1084K (ffffffff81f14000 -
ffffffff82023000)
[ 2.432636] Write protecting the kernel read-only data: 14336k
[ 2.434250] Freeing unused kernel memory: 1228K (ffff8800018cd000 -
ffff880001a00000)
[ 2.438522] Freeing unused kernel memory: 1328K (ffff880001cb4000 -
ffff880001e00000)
[ 2.493209] setfont (1160) used greatest stack depth: 13656 bytes
left
[ 2.522615] init-early.sh (1159) used greatest stack depth: 13048
bytes left
[ 2.903608] systemd-udevd[1373]: starting version 218
[ 2.907958] systemd-udevd[1373]: Network interface NamePolicy=
disabled on kernel command line, ignoring.
[ 2.908114] random: systemd-udevd urandom read with 38 bits of
entropy available
[ 3.016335] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 3.016339] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.016341] thinkpad_acpi: ThinkPad BIOS GRET46WW (1.23 ), EC unknown
[ 3.016342] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model
20A7005MGE
[ 3.017094] thinkpad_acpi: unknown version of the HKEY interface:
0x200
[ 3.017097] thinkpad_acpi: please report this to
ibm-acpi-devel@lists.sourceforge.net
[ 3.017105] thinkpad_acpi: radio switch found; radios are enabled
[ 3.017121] thinkpad_acpi: This ThinkPad has standard ACPI backlight
brightness control, supported by the ACPI video driver
[ 3.017122] thinkpad_acpi: Disabling thinkpad-acpi brightness events
by default...
[ 3.018688] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio
is unblocked
[ 3.019369] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is
unblocked
[ 3.019849] systemd-udevd[1374]: Network interface NamePolicy=
disabled on kernel command line, ignoring.
[ 3.020801] thinkpad_acpi: warning: userspace override of important
firmware LEDs is enabled
[ 3.022038] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input9
[ 3.022538] systemd-udevd (1407) used greatest stack depth: 12944
bytes left
[ 3.046029] Intel(R) Wireless WiFi driver for Linux
[ 3.046032] Copyright(c) 2003- 2015 Intel Corporation
[ 3.049928] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
0xffffffff81a84050)
[ 3.061421] iwlwifi 0000:03:00.0: loaded firmware version 17.265642.0
op_mode iwlmvm
[ 3.064140] snd_hda_codec_generic hdaudioC1D0: autoconfig for
Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.064145] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 3.064148] snd_hda_codec_generic hdaudioC1D0: hp_outs=1
(0x15/0x0/0x0/0x0/0x0)
[ 3.064150] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
[ 3.064151] snd_hda_codec_generic hdaudioC1D0: inputs:
[ 3.064154] snd_hda_codec_generic hdaudioC1D0: Mic=0x1a
[ 3.064156] snd_hda_codec_generic hdaudioC1D0: Internal Mic=0x12
[ 3.068860] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.068965] snd_hda_intel 0000:00:03.0: Too many HDMI devices
[ 3.068969] snd_hda_intel 0000:00:03.0: Consider building the kernel
with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.069120] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.069343] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band
Wireless AC 7260, REV=0x144
[ 3.069833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 3.070499] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 3.071665] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 3.072275] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 3.072467] input: HDA Intel HDMI HDMI/DP as
/devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 3.091091] cdc_ncm 2-4:1.0: MAC-Address: ff:ff:ff:ff:ff:ff
[ 3.091096] cdc_ncm 2-4:1.0: setting rx_max = 16384
[ 3.091872] cdc_ncm 2-4:1.0 usb0: register 'cdc_ncm' at
usb-0000:00:14.0-4, CDC NCM, ff:ff:ff:ff:ff:ff
[ 3.091903] usbcore: registered new interface driver cdc_ncm
[ 3.277887] ieee80211 phy0: Selected rate control algorithm
'iwl-mvm-rs'
[ 3.438586] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 3.528197] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1
across:2097148k SS
[ 5.869460] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 5.870078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 6.062495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 6.063115] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[ 6.092691] ip (2349) used greatest stack depth: 12192 bytes left
[ 8.685944] random: nonblocking pool is initialized
[ 9.368752] wlan0: authenticate with e4:f4:c6:0a:bb:8b
[ 9.372797] wlan0: send auth to e4:f4:c6:0a:bb:8b (try 1/3)
[ 9.373419] wlan0: authenticated
[ 9.374132] wlan0: associate with e4:f4:c6:0a:bb:8b (try 1/3)
[ 9.375186] wlan0: RX AssocResp from e4:f4:c6:0a:bb:8b (capab=0x1011
status=0 aid=1)
[ 9.376508] wlan0: associated
[ 55.030187] usb 2-2: new high-speed USB device number 5 using
xhci_hcd
[ 55.194925] usb 2-2: New USB device found, idVendor=2040,
idProduct=0264
[ 55.194934] usb 2-2: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 55.194939] usb 2-2: Product: soloHD
[ 55.194942] usb 2-2: Manufacturer: HCW
[ 55.194945] usb 2-2: SerialNumber: 0011548565
[ 55.386950] em28xx: New device HCW soloHD @ 480 Mbps (2040:0264,
interface 0, class 0)
[ 55.386956] em28xx: DVB interface 0 found: isoc
[ 55.387013] em28xx: chip ID is em28178
[ 57.321297] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash =
0xcce4cb04
[ 57.321304] em28178 #0: EEPROM info:
[ 57.321307] em28178 #0: microcode start address = 0x0004, boot
configuration = 0x01
[ 57.328249] em28178 #0: AC97 audio (5 sample rates)
[ 57.328256] em28178 #0: 500mA max power
[ 57.328260] em28178 #0: Table at offset 0x27, strings=0x0e6a,
0x1888, 0x087e
[ 57.328360] em28178 #0: Identified as PCTV tripleStick (292e)
(card=94)
[ 57.328366] em28178 #0: dvb set to isoc mode.
[ 57.328423] usbcore: registered new interface driver em28xx
[ 57.335752] em28178 #0: Binding DVB extension
[ 57.338179] i2c i2c-11: Added multiplexed i2c bus 12
[ 57.338185] si2168 11-0064: Silicon Labs Si2168 successfully attached
[ 57.340481] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158
successfully attached
[ 57.340490] DVB: registering new adapter (em28178 #0)
[ 57.340494] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon
Labs Si2168)...
[ 57.340896] em28178 #0: DVB extension successfully initialized
[ 57.340901] em28xx: Registered (Em28xx dvb Extension) extension
[ 57.343406] em28178 #0: Registering input extension
[ 57.343526] Registered IR keymap rc-pinnacle-pctv-hd
[ 57.343608] input: em28xx IR (em28178 #0) as
/devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0/input15
[ 57.343680] rc rc0: em28xx IR (em28178 #0) as
/devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0
[ 57.343787] em28178 #0: Input extension successfully initalized
[ 57.343789] em28xx: Registered (Em28xx Input Extension) extension
[ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
[ 101.428693] si2168 11-0064: downloading firmware from file
'dvb-demod-si2168-b40-01.fw'
[ 101.657999] si2168 11-0064: firmware version: 4.0.11
[ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
[ 101.709738] si2157 12-0060: firmware version: 3.0.5
Another thing. At the end of w_scan i get:
tune to: QAM_16 f = 778000 kHz I999B8C23D0T8G8Y0 (8468:12297:2305)
(time: 05:43.352)
service = 1-2-3.tv (MEDIA BROADCAST)
service = RTLNITRO (MEDIA BROADCAST)
service = TLC (MEDIA BROADCAST)
service = JuweloSK (MEDIA BROADCAST)
tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
(8468:12352:16481) (time: 05:57.355)
----------no signal----------
tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
(8468:12352:16481) (time: 06:03.441) (no signal)
----------no signal----------
tune to: QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 (8468:12352:16497)
(time: 06:09.478)
updating transponder:
(QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
(8468:12352:16481)) 0x0000
to (QAM_AUTO f = 650000 kHz I999B8C0D0T32G16Y0P0
(8468:12352:16481)) 0x4004
service = ssu (Harmonic)
service = multithek dvb-t (Internet) (Media Broadcast)
tune to: QAM_64 f = 578000 kHz I999B8C23D0T8G4Y0 (8468:12348:15361)
(time: 06:25.355)
----------no signal----------
tune to: QAM_AUTO f = 578000 kHz I999B8C999D0T999G999Y0
(8468:12348:15361) (time: 06:31.436) (no signal)
----------no signal----------
tune to: QAM_16 f = 730000 kHz I999B8C34D0T8G4Y0 (8468:12361:18689)
(time: 06:37.533)
----------no signal----------
tune to: QAM_AUTO f = 730000 kHz I999B8C999D0T999G999Y0
(8468:12361:18689) (time: 06:43.620) (no signal)
----------no signal----------
tune to: QAM_16 f = 762000 kHz I999B8C23D0T8G4Y0 (8468:12368:20481)
(time: 06:49.706)
----------no signal----------
tune to: QAM_AUTO f = 762000 kHz I999B8C999D0T999G999Y0
(8468:12368:20481) (time: 06:55.793) (no signal)
----------no signal----------
retrying with center_frequency = 514000000
tune to: QAM_16 f = 514000 kHz I999B8C23D0T8G4Y0 (8468:12306:4609)
(time: 07:01.879)
----------no signal----------
tune to: QAM_AUTO f = 514000 kHz I999B8C999D0T999G999Y0
(8468:12306:4609) (time: 07:07.964) (no signal)
----------no signal----------
tune to: QAM_64 f = 474000 kHz I999B8C23D0T8G4Y0 (8468:12346:14849)
(time: 07:14.051)
----------no signal----------
tune to: QAM_AUTO f = 474000 kHz I999B8C999D0T999G999Y0
(8468:12346:14849) (time: 07:20.138) (no signal)
----------no signal----------
(time: 07:26.222) dumping lists (57 services)
Is that helping?
thanks again.
t.
On 2016-06-18 18:56, Olli Salonen wrote:
> Hi Thomas,
>
> Please reboot your PC, run w_scan and then send the full output of
> dmesg command. Maybe the driver has printed something in the logs that
> can help us narrow the cause.
>
> Cheers,
> -olli
>
> On 18 June 2016 at 18:55, Thomas Stein <himbeere@meine-oma.de> wrote:
>> Hello.
>>
>> I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I
>> saw
>> there is general support already in the kernel.
>> https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc
>>
>> I'm able to use this device for dvb-t but not dvb-t2. I'm living in
>> berlin
>> so it should work. w_scan is scanning dvb-t2 and seems
>> to find channels:
>>
>> Scanning DVB-T2...
>> Scanning 7MHz frequencies...
>> 177500: (time: 02:17.828)
>> 184500: (time: 02:19.828)
>> 191500: (time: 02:21.876)
>> 198500: (time: 02:23.924)
>> 205500: (time: 02:25.971)
>> 212500: (time: 02:27.971)
>> 219500: (time: 02:30.021)
>> 226500: (time: 02:32.071)
>> Scanning 8MHz frequencies...
>> 474000: (time: 02:34.120)
>> 482000: (time: 02:36.121)
>> 490000: (time: 02:38.169)
>> 498000: (time: 02:40.219)
>> 506000: skipped (already known transponder)
>> 514000: (time: 02:42.268)
>> 522000: skipped (already known transponder)
>> 530000: (time: 02:44.318)
>> 538000: (time: 02:46.368)
>> 546000: (time: 02:48.417)
>> 554000: (time: 02:50.417)
>> 562000: (time: 02:52.467)
>> 570000: skipped (already known transponder)
>> 578000: (time: 02:54.467)
>> 586000: (time: 02:56.469)
>> 594000: (time: 02:58.469)
>> 602000: (time: 03:00.518)
>> 610000: (time: 03:02.567)
>> 618000: skipped (already known transponder)
>> 626000: (time: 03:04.617)
>> 634000: (time: 03:06.617)
>> 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000
>> kHz
>> I999B8C999D999T999G999Y999P0 (0:0:0)
>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) :
>> updating transport_stream_id: -> (0:0:16481)
>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>> (0:0:16481) :
>> updating network_id -> (0:12352:16481)
>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>> (0:12352:16481)
>> : updating original_network_id -> (8468:12352:16481)
>> updating transponder:
>> (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>> (8468:12352:16481)) 0x0000
>> to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
>> (8468:12352:16481)) 0x4004
>> new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1
>> (8468:12352:16497)) 0x4004
>> 650000: skipped (already known transponder)
>> 658000: skipped (already known transponder)
>> 666000: (time: 03:10.382)
>> 674000: (time: 03:12.429)
>> 682000: skipped (already known transponder)
>> 690000: (time: 03:14.476)
>> 698000: (time: 03:16.528)
>> 706000: skipped (already known transponder)
>> 714000: (time: 03:18.575)
>> 722000: (time: 03:20.623)
>> 730000: (time: 03:22.669)
>> 738000: (time: 03:24.716)
>> 746000: (time: 03:26.764)
>> 754000: skipped (already known transponder)
>> 762000: (time: 03:28.811)
>> 770000: (time: 03:30.860)
>> 778000: skipped (already known transponder)
>> 786000: (time: 03:32.908)
>> 794000: (time: 03:34.953)
>> 802000: (time: 03:36.999)
>> 810000: (time: 03:39.045)
>> 818000: (time: 03:41.045)
>> 826000: (time: 03:43.091)
>> 834000: (time: 03:45.137)
>> 842000: (time: 03:47.185)
>> 850000: (time: 03:49.231)
>> 858000: (time: 03:51.277)
>>
>> So the question is, what is going wrong? When i start vlc with dvb-t2
>> channels file for berlin i get:
>>
>> [00007f7e0c01a0e8] ts demux error: cannot peek
>>
>> Any hints appreciated.
>>
>> cheers
>> t.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: 0xF5437AA0.asc --]
[-- Type: application/pgp-keys, Size: 5366 bytes --]
[-- Attachment #3: 0xF5437AA0.asc --]
[-- Type: application/pgp-keys, Size: 5281 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb usb stick Hauppauge WinTV-soloHD
2016-06-18 17:17 ` Thomas Stein
@ 2016-06-22 19:10 ` Olli Salonen
2016-06-22 19:25 ` Olli Salonen
0 siblings, 1 reply; 6+ messages in thread
From: Olli Salonen @ 2016-06-22 19:10 UTC (permalink / raw)
To: Thomas Stein; +Cc: linux-media
Hi Thomas,
Ok, the correct firmwares are there:
[ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
[ 101.428693] si2168 11-0064: downloading firmware from file
'dvb-demod-si2168-b40-01.fw'
[ 101.657999] si2168 11-0064: firmware version: 4.0.11
[ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
[ 101.709738] si2157 12-0060: firmware version: 3.0.5
Basically everything looks good. Does this work on a Windows computer
using the same antenna cable and the same USB tuner?
DVB-T2 support in w_scan has been evolving also, so make sure you've
got quite recent version.
I've found that dvbv5-scan does the best job when scanning for
channels. However that needs initial scan table to start with. The
initial scan tables for Berlin don't seem to contain any DVB-T2 muxes
though: https://git.linuxtv.org/dtv-scan-tables.git/tree/dvb-t/de-Berlin
This means they're probably a bit out of date. If you know the DVB-T2
mux details, you can add them yourself and try dvbv5-scan.
Cheers,
-olli
On 18 June 2016 at 20:17, Thomas Stein <himbeere@meine-oma.de> wrote:
> Hi Olli.
>
> Thanks for your answer.
>
> Here we go.
>
> [ 0.000000] Linux version 4.6.2 (root@rather) (gcc version 5.3.0 (Gentoo
> 5.3.0 p1.0, pie-0.6.5) ) #3 SMP Sat Jun 18 13:34:40 CEST 2016
> [ 0.000000] Command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3 ro
> net.ifnames=0
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
> registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
> bytes, using 'standard' format.
> [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce20ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000ce210000-0x00000000dcd3efff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI
> NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI
> data
> [ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dfa0ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: LENOVO 20A7005MGE/20A7005MGE, BIOS GRET46WW (1.23 )
> 11/04/2015
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: write-back
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
> [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
> [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
> [ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
> [ 0.000000] e820: last_pfn = 0xce210 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at
> [ffff8800000f0100]
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE
> [ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE
> [ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE
> [ 0.000000] BRK [0x02104000, 0x02104fff] PGTABLE
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
> [ 0.000000] ACPI: XSDT 0x00000000DCEFE170 0000C4 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: DSDT 0x00000000DCEDF000 013476 (v01 LENOVO TP-GR
> 00001230 INTL 20120711)
> [ 0.000000] ACPI: FACS 0x00000000DCE6A000 000040
> [ 0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GR
> 00001230 PTEC 00000001)
> [ 0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1
> 00000100 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2
> 00000200 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000DCEDE000 0009CB (v01 LENOVO SataAhci
> 00001000 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000DCEDD000 0007F5 (v01 LENOVO Cpu0Ist
> 00003000 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000DCEDC000 000AD8 (v01 LENOVO CpuPm
> 00003000 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000DCEDA000 00125C (v01 LENOVO SaSsdt
> 00003000 INTL 20120711)
> [ 0.000000] ACPI: UEFI 0x00000000DCED9000 000042 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: MSDM 0x00000000DCE44000 000055 (v03 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: BATB 0x00000000DCED8000 000046 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: FPDT 0x00000000DCED7000 000064 (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: UEFI 0x00000000DCED6000 0002CE (v01 LENOVO TP-GR
> 00001230 PTEC 00000002)
> [ 0.000000] ACPI: SSDT 0x00000000DCED5000 00047F (v01 LENOVO IsctTabl
> 00001000 INTL 20120711)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce20ffff]
> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x0000000000001000-0x000000021f5fffff]
> [ 0.000000] On node 0 totalpages: 2021292
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 13129 pages used for memmap
> [ 0.000000] DMA32 zone: 840208 pages, LIFO batch:31
> [ 0.000000] Normal zone: 18392 pages used for memmap
> [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
> [ 0.000000] Reserving Intel graphics stolen memory at
> 0xdda00000-0xdf9fffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
> 0-39
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xce210000-0xdcd3efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdfa0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa10000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
> [ 0.000000] e820: [mem 0xdfa10000-0xf7ffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
> nr_node_ids:1
> [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88021f200000 s91288 r8192
> d31592 u262144
> [ 0.000000] pcpu-alloc: s91288 r8192 d31592 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
> pages: 1989686
> [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3
> ro net.ifnames=0
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
> bytes)
> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
> bytes)
> [ 0.000000] Memory: 7861144K/8085168K available (8993K kernel code, 1099K
> rwdata, 2768K rodata, 1084K init, 844K bss, 224024K reserved, 0K
> cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 64.
> [ 0.000000] NR_IRQS:4352 nr_irqs:760 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
> max_idle_ns: 133484882848 ns
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 2294.638 MHz processor
> [ 0.000003] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 4589.27 BogoMIPS (lpj=2294638)
> [ 0.000196] pid_max: default: 32768 minimum: 301
> [ 0.000292] ACPI: Core revision 20160108
> [ 0.021433] ACPI: 8 ACPI AML tables successfully acquired and loaded
>
> [ 0.021689] Security Framework initialized
> [ 0.021789] Mount-cache hash table entries: 16384 (order: 5, 131072
> bytes)
> [ 0.021890] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
> bytes)
> [ 0.022281] CPU: Physical Processor ID: 0
> [ 0.022373] CPU: Processor Core ID: 0
> [ 0.022467] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.022564] ENERGY_PERF_BIAS: View and update with
> x86_energy_perf_policy(8)
> [ 0.022676] mce: CPU supports 7 MCE banks
> [ 0.022783] CPU0: Thermal monitoring enabled (TM1)
> [ 0.022887] process: using mwait in idle threads
> [ 0.022983] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
> [ 0.023080] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
> [ 0.023758] Freeing SMP alternatives memory: 36K (ffffffff82023000 -
> ffffffff8202c000)
> [ 0.032425] smpboot: Max logical packages: 4
> [ 0.032521] smpboot: APIC(0) Converting physical 0 to logical package
> 0
> [ 0.033235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.043337] TSC deadline timer enabled
> [ 0.043341] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
> (family: 0x6, model: 0x45, stepping: 0x1)
> [ 0.043632] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events,
> full-width counters, Intel PMU driver.
> [ 0.044008] ... version: 3
> [ 0.044102] ... bit width: 48
> [ 0.044194] ... generic registers: 4
> [ 0.044287] ... value mask: 0000ffffffffffff
> [ 0.044384] ... max period: 0000ffffffffffff
> [ 0.044481] ... fixed-purpose events: 3
> [ 0.044573] ... event mask: 000000070000000f
> [ 0.045021] x86: Booting SMP configuration:
> [ 0.046155] .... node #0, CPUs: #1 #2 #3
> [ 0.232523] x86: Booted up 1 node, 4 CPUs
> [ 0.232705] smpboot: Total of 4 processors activated (18376.56 BogoMIPS)
> [ 0.238513] devtmpfs: initialized
> [ 0.238861] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff]
> (1310720 bytes)
> [ 0.239128] kworker/u16:0 (29) used greatest stack depth: 14280 bytes
> left
> [ 0.239130] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.239257] RTC time: 19:01:15, date: 06/18/16
> [ 0.239394] NET: Registered protocol family 16
> [ 0.244260] cpuidle: using governor ladder
> [ 0.250272] cpuidle: using governor menu
> [ 0.250438] ACPI FADT declares the system doesn't support PCIe ASPM, so
> disable it
> [ 0.250584] ACPI: bus type PCI registered
> [ 0.250845] PCI: Using configuration type 1 for base access
> [ 0.250990] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
> [ 0.254230] kworker/u16:2 (278) used greatest stack depth: 14184 bytes
> left
> [ 0.254429] kworker/u16:1 (290) used greatest stack depth: 14160 bytes
> left
> [ 0.259563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.259852] ACPI: Added _OSI(Module Device)
> [ 0.259948] ACPI: Added _OSI(Processor Device)
> [ 0.260043] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.260139] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.260523] ACPI : EC: EC description table is found, configuring boot EC
> [ 0.260640] ACPI : EC: EC started
> [ 0.268034] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.270402] ACPI: Dynamic OEM Table Load:
> [ 0.270590] ACPI: SSDT 0xFFFF880215F52800 000436 (v01 PmRef Cpu0Cst
> 00003001 INTL 20120711)
> [ 0.271758] ACPI: Dynamic OEM Table Load:
> [ 0.271943] ACPI: SSDT 0xFFFF880215F53000 0005AA (v01 PmRef ApIst
> 00003000 INTL 20120711)
> [ 0.273168] ACPI: Dynamic OEM Table Load:
> [ 0.273351] ACPI: SSDT 0xFFFF8800C9F61800 000119 (v01 PmRef ApCst
> 00003000 INTL 20120711)
> [ 0.275037] ACPI: Interpreter enabled
> [ 0.275160] ACPI: (supports S0 S3 S4 S5)
> [ 0.275255] ACPI: Using IOAPIC for interrupt routing
> [ 0.275385] PCI: Using host bridge windows from ACPI; if necessary, use
> "pci=nocrs" and report a bug
> [ 0.278879] ACPI: Power Resource [PUBS] (on)
> [ 0.284147] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.284743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
> [ 0.285327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
> [ 0.285914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
> [ 0.286499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.287066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0,
> disabled.
> [ 0.287777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
> [ 0.288359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
> [ 0.288961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
> [ 0.289067] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments
> MSI]
> [ 0.289241] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires
> [ExtendedConfig ASPM ClockPM MSI]
> [ 0.289450] PCI host bridge to bus 0000:00
> [ 0.289547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 0.289653] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.289756] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
> window]
> [ 0.289900] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff
> window]
> [ 0.290045] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff
> window]
> [ 0.290190] pci_bus 0000:00: root bus resource [bus 00-3f]
> [ 0.290295] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
> [ 0.290406] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
> [ 0.290423] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
> [ 0.290432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
> pref]
> [ 0.290438] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
> [ 0.290540] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
> [ 0.290551] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit]
> [ 0.290680] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
> [ 0.290699] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit]
> [ 0.290766] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.290805] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.290951] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
> [ 0.290970] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f 64bit]
> [ 0.291039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.291123] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
> [ 0.291139] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
> [ 0.291148] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
> [ 0.291157] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
> [ 0.291218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 0.291256] pci 0000:00:19.0: System wakeup disabled by ACPI
> [ 0.291402] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
> [ 0.291418] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit]
> [ 0.291488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.291568] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
> [ 0.291644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.291781] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
> [ 0.291858] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.291936] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.292088] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
> [ 0.292108] pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
> [ 0.292202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.292242] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.292387] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
> [ 0.292578] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
> [ 0.292593] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
> [ 0.292601] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
> [ 0.292609] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
> [ 0.292617] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
> [ 0.292625] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
> [ 0.292634] pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff]
> [ 0.292677] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.292752] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
> [ 0.292767] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit]
> [ 0.292789] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
> [ 0.292925] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.293235] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
> [ 0.293319] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
> [ 0.293685] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.295818] pci 0000:00:1c.1: PCI bridge to [bus 03]
> [ 0.295919] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
> [ 0.295938] pci_bus 0000:00: on NUMA node 0
> [ 0.296986] ACPI: Enabled 4 GPEs in block 00 to 7F
> [ 0.297271] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data =
> 0x62
> [ 0.297481] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 0.297582] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.297734] vgaarb: loaded
> [ 0.297825] vgaarb: bridge control possible 0000:00:02.0
> [ 0.298025] SCSI subsystem initialized
> [ 0.298181] libata version 3.00 loaded.
> [ 0.298196] ACPI: bus type USB registered
> [ 0.298327] usbcore: registered new interface driver usbfs
> [ 0.298446] usbcore: registered new interface driver hub
> [ 0.298571] usbcore: registered new device driver usb
> [ 0.298708] Linux video capture interface: v2.00
> [ 0.298844] pps_core: LinuxPPS API ver. 1 registered
> [ 0.298942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <giometti@linux.it>
> [ 0.299097] PTP clock support registered
> [ 0.299269] Advanced Linux Sound Architecture Driver Initialized.
> [ 0.299386] PCI: Using ACPI for IRQ routing
> [ 0.299513] PCI: pci_cache_line_size set to 64 bytes
> [ 0.299823] Expanded resource reserved due to conflict with PCI Bus
> 0000:00
> [ 0.299925] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
> [ 0.299928] e820: reserve RAM buffer [mem 0xce210000-0xcfffffff]
> [ 0.299930] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
> [ 0.300102] Bluetooth: Core ver 2.21
> [ 0.300204] NET: Registered protocol family 31
> [ 0.300300] Bluetooth: HCI device and connection manager initialized
> [ 0.300401] Bluetooth: HCI socket layer initialized
> [ 0.300500] Bluetooth: L2CAP socket layer initialized
> [ 0.300601] Bluetooth: SCO socket layer initialized
> [ 0.300834] NetLabel: Initializing
> [ 0.300930] NetLabel: domain hash size = 128
> [ 0.301023] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.301135] NetLabel: unlabeled traffic allowed by default
> [ 0.301332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.301794] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 0.303929] clocksource: Switched to clocksource hpet
> [ 0.310841] VFS: Disk quotas dquot_6.6.0
> [ 0.310968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 0.311222] pnp: PnP ACPI init
> [ 0.311820] system 00:00: [mem 0x00000000-0x0009ffff] could not be
> reserved
> [ 0.311936] system 00:00: [mem 0x000c0000-0x000c3fff] could not be
> reserved
> [ 0.312037] system 00:00: [mem 0x000c4000-0x000c7fff] could not be
> reserved
> [ 0.312138] system 00:00: [mem 0x000c8000-0x000cbfff] could not be
> reserved
> [ 0.312239] system 00:00: [mem 0x000cc000-0x000cffff] could not be
> reserved
> [ 0.312340] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
> [ 0.312441] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
> [ 0.312541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
> [ 0.312641] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
> [ 0.312741] system 00:00: [mem 0x000e0000-0x000e3fff] could not be
> reserved
> [ 0.312842] system 00:00: [mem 0x000e4000-0x000e7fff] could not be
> reserved
> [ 0.312952] system 00:00: [mem 0x000e8000-0x000ebfff] could not be
> reserved
> [ 0.313053] system 00:00: [mem 0x000ec000-0x000effff] could not be
> reserved
> [ 0.313154] system 00:00: [mem 0x000f0000-0x000fffff] could not be
> reserved
> [ 0.313255] system 00:00: [mem 0x00100000-0xdf9fffff] could not be
> reserved
> [ 0.313356] system 00:00: [mem 0xfec00000-0xffffffff] could not be
> reserved
> [ 0.313461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.313610] pnp 00:01: [Firmware Bug]: PNP resource [mem
> 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending
> to [mem 0xfed10000-0xfed17fff]
> [ 0.313842] system 00:01: [io 0x1800-0x189f] could not be reserved
> [ 0.313955] system 00:01: [io 0x0800-0x087f] has been reserved
> [ 0.314055] system 00:01: [io 0x0880-0x08ff] has been reserved
> [ 0.314154] system 00:01: [io 0x0900-0x097f] has been reserved
> [ 0.314253] system 00:01: [io 0x0980-0x09ff] has been reserved
> [ 0.314352] system 00:01: [io 0x0a00-0x0a7f] has been reserved
> [ 0.314450] system 00:01: [io 0x0a80-0x0aff] has been reserved
> [ 0.314549] system 00:01: [io 0x0b00-0x0b7f] has been reserved
> [ 0.314647] system 00:01: [io 0x0b80-0x0bff] has been reserved
> [ 0.314746] system 00:01: [io 0x15e0-0x15ef] has been reserved
> [ 0.314844] system 00:01: [io 0x1600-0x167f] has been reserved
> [ 0.314951] system 00:01: [io 0x1640-0x165f] has been reserved
> [ 0.315051] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 0.315153] system 00:01: [mem 0x00000000-0x00000fff] could not be
> reserved
> [ 0.315254] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.315354] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 0.315455] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.315555] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.315655] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
> [ 0.315756] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
> [ 0.315858] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.315937] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.315968] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303
> (active)
> [ 0.315995] pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13
> (active)
> [ 0.316527] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
> [ 0.316631] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.316683] pnp: PnP ACPI: found 6 devices
> [ 0.323875] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
> max_idle_ns: 2085701024 ns
> [ 0.324057] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
> 02] add_size 1000
> [ 0.324061] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
> 64bit pref] to [bus 02] add_size 200000 add_align 100000
> [ 0.324064] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
> to [bus 02] add_size 200000 add_align 100000
> [ 0.324079] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff]
> res_to_dev_res add_size 200000 min_align 100000
> [ 0.324081] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x002fffff]
> res_to_dev_res add_size 200000 min_align 100000
> [ 0.324084] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
> pref] res_to_dev_res add_size 200000 min_align 100000
> [ 0.324086] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit
> pref] res_to_dev_res add_size 200000 min_align 100000
> [ 0.324088] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res
> add_size 1000 min_align 1000
> [ 0.324091] pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res
> add_size 1000 min_align 1000
> [ 0.324096] pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfb00000-0xdfcfffff]
> [ 0.324203] pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfd00000-0xdfefffff
> 64bit pref]
> [ 0.324351] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
> [ 0.324453] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [ 0.324552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
> [ 0.324654] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
> [ 0.324758] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff
> 64bit pref]
> [ 0.324908] pci 0000:00:1c.1: PCI bridge to [bus 03]
> [ 0.325017] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
> [ 0.325126] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 0.325128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 0.325131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
> window]
> [ 0.325133] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff
> window]
> [ 0.325135] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff
> window]
> [ 0.325137] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
> [ 0.325139] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
> [ 0.325141] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit
> pref]
> [ 0.325143] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
> [ 0.325183] NET: Registered protocol family 2
> [ 0.325470] TCP established hash table entries: 65536 (order: 7, 524288
> bytes)
> [ 0.325725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.325988] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.326114] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.326238] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.326419] NET: Registered protocol family 1
> [ 0.326594] RPC: Registered named UNIX socket transport module.
> [ 0.326696] RPC: Registered udp transport module.
> [ 0.326790] RPC: Registered tcp transport module.
> [ 0.326885] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 0.327064] pci 0000:00:02.0: Video device with shadowed ROM at [mem
> 0x000c0000-0x000dffff]
> [ 0.327700] PCI: CLS 64 bytes, default 64
> [ 0.327729] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.327832] software IO TLB [mem 0xca210000-0xce210000] (64MB) mapped at
> [ffff8800ca210000-ffff8800ce20ffff]
> [ 0.328082] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360
> ms ovfl timer
> [ 0.329310] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [ 0.329408] RAPL PMU: hw unit of domain package 2^-14 Joules
> [ 0.329504] RAPL PMU: hw unit of domain dram 2^-14 Joules
> [ 0.329601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
> [ 0.330119] Scanning for low memory corruption every 60 seconds
> [ 0.330598] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 0.330737] audit: initializing netlink subsys (disabled)
> [ 0.330844] audit: type=2000 audit(1466276474.314:1): initialized
> [ 0.331567] workingset: timestamp_bits=60 max_order=21 bucket_order=0
> [ 0.335140] NFS: Registering the id_resolver key type
> [ 0.335246] Key type id_resolver registered
> [ 0.335342] Key type id_legacy registered
> [ 0.335501] fuse init (API version 7.24)
> [ 0.336731] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 251)
> [ 0.336885] io scheduler noop registered
> [ 0.337038] io scheduler deadline registered
> [ 0.337177] io scheduler cfq registered (default)
> [ 0.337649] intel_idle: MWAIT substates: 0x11142120
> [ 0.337652] intel_idle: v0.4.1 model 0x45
> [ 0.337924] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 0.338106] ACPI: AC Adapter [AC] (on-line)
> [ 0.338281] input: Lid Switch as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [ 0.338560] ACPI: Lid Switch [LID]
> [ 0.338697] input: Sleep Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
> [ 0.338852] ACPI: Sleep Button [SLPB]
> [ 0.339076] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 0.339229] ACPI: Power Button [PWRF]
> [ 0.340623] thermal LNXTHERM:00: registered as thermal_zone0
> [ 0.340724] ACPI: Thermal Zone [THM0] (45 C)
> [ 0.340893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.341643] Non-volatile memory driver v1.3
> [ 0.341812] Linux agpgart interface v0.103
> [ 0.341990] [drm] Initialized drm 1.1.0 20060810
> [ 0.342731] [drm] Memory usable by graphics device = 2048M
> [ 0.342883] [drm] Replacing VGA console driver
> [ 0.344095] Console: switching to colour dummy device 80x25
> [ 0.349322] ACPI: Battery Slot [BAT0] (battery present)
> [ 0.350072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 0.350078] [drm] Driver supports precise vblank timestamp query.
> [ 0.350404] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 0.389347] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 0.389938] input: Video Bus as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
> [ 0.389997] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on
> minor 0
> [ 0.391982] loop: module loaded
> [ 0.392110] ahci 0000:00:1f.2: version 3.0
> [ 0.402379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1
> impl SATA mode
> [ 0.402393] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum
> part deso sadm sds apst
> [ 0.402925] scsi host0: ahci
> [ 0.403073] scsi host1: ahci
> [ 0.403179] scsi host2: ahci
> [ 0.403233] ata1: SATA max UDMA/133 abar m2048@0xf053c000 port 0xf053c100
> irq 41
> [ 0.403240] ata2: DUMMY
> [ 0.403244] ata3: DUMMY
> [ 0.403383] e1000: Intel(R) PRO/1000 Network Driver - version
> 7.3.21-k8-NAPI
> [ 0.403389] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [ 0.403412] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
> [ 0.403417] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [ 0.403584] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set
> to dynamic conservative mode
> [ 0.566997] fbcon: inteldrmfb (fb0) is primary device
> [ 0.706983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 0.719971] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
> succeeded
> [ 0.719974] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
> filtered out
> [ 0.722129] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
> succeeded
> [ 0.727893] ata1.00: supports DRM functions and may not be fully
> accessible
> [ 0.730026] ata1.00: ATA-9: INTEL SSDSCKGF180A4L, LSTi, max UDMA/133
> [ 0.730029] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 0.750022] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
> succeeded
> [ 0.750024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
> filtered out
> [ 0.752120] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
> succeeded
> [ 0.757897] ata1.00: supports DRM functions and may not be fully
> accessible
> [ 0.767970] ata1.00: configured for UDMA/133
> [ 0.826761] e1000e 0000:00:19.0 eth0: registered PHC clock
> [ 0.826763] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
> 54:ee:75:07:92:a9
> [ 0.826764] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
> Connection
> [ 0.826801] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
> 1000FF-0FF
> [ 0.826834] igb: Intel(R) Gigabit Ethernet Network Driver - version
> 5.3.0-k
> [ 0.826834] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 0.826858] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
> version 2.0.2-k
> [ 0.826858] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
> [ 0.826973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.826976] ehci-pci: EHCI PCI platform driver
> [ 0.827128] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 0.827182] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
> number 1
> [ 0.827195] ehci-pci 0000:00:1d.0: debug port 2
> [ 0.831108] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 0.831122] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000
> [ 0.837021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 0.837071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.837072] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.837074] usb usb1: Product: EHCI Host Controller
> [ 0.837075] usb usb1: Manufacturer: Linux 4.6.2 ehci_hcd
> [ 0.837076] usb usb1: SerialNumber: 0000:00:1d.0
> [ 0.837271] hub 1-0:1.0: USB hub found
> [ 0.837279] hub 1-0:1.0: 3 ports detected
> [ 0.837469] ehci-platform: EHCI generic platform driver
> [ 0.837496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.837512] ohci-pci: OHCI PCI platform driver
> [ 0.837537] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.837680] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.837736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
> number 2
> [ 0.838822] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
> 0x100 quirks 0x0004b810
> [ 0.838827] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [ 0.838910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.838911] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.838912] usb usb2: Product: xHCI Host Controller
> [ 0.838913] usb usb2: Manufacturer: Linux 4.6.2 xhci-hcd
> [ 0.838914] usb usb2: SerialNumber: 0000:00:14.0
> [ 0.839063] hub 2-0:1.0: USB hub found
> [ 0.839077] hub 2-0:1.0: 9 ports detected
> [ 0.841021] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.841068] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
> number 3
> [ 0.841107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
> [ 0.841108] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.841110] usb usb3: Product: xHCI Host Controller
> [ 0.841111] usb usb3: Manufacturer: Linux 4.6.2 xhci-hcd
> [ 0.841112] usb usb3: SerialNumber: 0000:00:14.0
> [ 0.841243] hub 3-0:1.0: USB hub found
> [ 0.841254] hub 3-0:1.0: 4 ports detected
> [ 0.842267] usbcore: registered new interface driver usblp
> [ 0.842305] usbcore: registered new interface driver usb-storage
> [ 0.842355] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
> 0x60,0x64 irq 1,12
> [ 0.844196] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.844200] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.844360] mousedev: PS/2 mouse device common for all mice
> [ 0.844656] rtc_cmos 00:02: RTC can wake from S4
> [ 0.844821] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 0.844848] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram,
> hpet irqs
> [ 0.845003] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
> [ 0.845876] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input4
> [ 0.846822] IR NEC protocol handler initialized
> [ 0.846826] IR RC5(x/sz) protocol handler initialized
> [ 0.846829] IR RC6 protocol handler initialized
> [ 0.846833] IR JVC protocol handler initialized
> [ 0.846836] IR Sony protocol handler initialized
> [ 0.846840] IR SANYO protocol handler initialized
> [ 0.846843] IR Sharp protocol handler initialized
> [ 0.846847] IR MCE Keyboard/mouse protocol handler initialized
> [ 0.846850] IR XMP protocol handler initialized
> [ 0.846875] usbcore: registered new interface driver uvcvideo
> [ 0.846876] USB Video Class driver (1.1.1)
> [ 0.847024] Bluetooth: HCI UART driver ver 2.3
> [ 0.847026] Bluetooth: HCI UART protocol H4 registered
> [ 0.847026] Bluetooth: HCI UART protocol BCSP registered
> [ 0.847027] Bluetooth: HCI UART protocol LL registered
> [ 0.847028] Bluetooth: HCI UART protocol ATH3K registered
> [ 0.847028] Bluetooth: HCI UART protocol Three-wire (H5) registered
> [ 0.847048] usbcore: registered new interface driver btusb
> [ 0.847088] hidraw: raw HID events driver (C) Jiri Kosina
> [ 0.847332] usbcore: registered new interface driver usbhid
> [ 0.847333] usbhid: USB HID core driver
> [ 0.847613] Netfilter messages via NETLINK v0.30.
> [ 0.847630] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
> [ 0.847986] Initializing XFRM netlink socket
> [ 0.847994] NET: Registered protocol family 17
> [ 0.848034] Bluetooth: RFCOMM TTY layer initialized
> [ 0.848037] Bluetooth: RFCOMM socket layer initialized
> [ 0.848041] Bluetooth: RFCOMM ver 1.11
> [ 0.848048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> [ 0.848052] Bluetooth: HIDP socket layer initialized
> [ 0.848083] Key type dns_resolver registered
> [ 0.848373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
> [ 0.848382] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
> [ 0.848394] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
> [ 0.848404] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
> [ 0.848441] microcode: Microcode Update Driver: v2.01
> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.848652] registered taskstats version 1
> [ 0.849234] Magic number: 4:330:41
> [ 0.849250] bdi 7:6: hash matches
> [ 1.139039] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 1.194038] usb 2-4: new high-speed USB device number 2 using xhci_hcd
> [ 1.253766] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
> [ 1.253768] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 1.254036] hub 1-1:1.0: USB hub found
> [ 1.254260] hub 1-1:1.0: 8 ports detected
> [ 1.329990] psmouse serio1: synaptics: queried max coordinates: x
> [..5112], y [..3834]
> [ 1.330000] tsc: Refined TSC clocksource calibration: 2294.686 MHz
> [ 1.330002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x211399552f8, max_idle_ns: 440795292447 ns
> [ 1.363006] psmouse serio1: synaptics: queried min coordinates: x
> [1024..], y [1024..]
> [ 1.363011] psmouse serio1: synaptics: quirked min/max coordinates: x
> [1024..5112], y [2024..4832]
> [ 1.365412] usb 2-4: New USB device found, idVendor=1199, idProduct=a001
> [ 1.365414] usb 2-4: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 1.365415] usb 2-4: Product: Sierra Wireless EM7345 4G LTE
> [ 1.365417] usb 2-4: Manufacturer: Sierra Wireless Inc.
> [ 1.365418] usb 2-4: SerialNumber: 013937000496677
> [ 1.425952] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id:
> 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id:
> 1545510
> [ 1.425980] psmouse serio1: synaptics: serio: Synaptics pass-through port
> at isa0060/serio1/input0
> [ 1.467198] input: SynPS/2 Synaptics TouchPad as
> /devices/platform/i8042/serio1/input/input6
> [ 1.530046] usb 1-1.8: new high-speed USB device number 3 using ehci-pci
> [ 1.530963] usb 2-6: new full-speed USB device number 3 using xhci_hcd
> [ 1.640531] usb 1-1.8: New USB device found, idVendor=04f2,
> idProduct=b3f5
> [ 1.640534] usb 1-1.8: New USB device strings: Mfr=3, Product=1,
> SerialNumber=2
> [ 1.640535] usb 1-1.8: Product: Integrated Camera
> [ 1.640536] usb 1-1.8: Manufacturer: Chicony Electronics Co.,Ltd.
> [ 1.640537] usb 1-1.8: SerialNumber: 0x0001
> [ 1.642187] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b3f5)
> [ 1.643866] input: Integrated Camera as
> /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input8
> [ 1.697658] usb 2-6: New USB device found, idVendor=138a, idProduct=0017
> [ 1.697660] usb 2-6: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [ 1.697661] usb 2-6: SerialNumber: 78916408f2b4
> [ 1.851001] usb 2-7: new full-speed USB device number 4 using xhci_hcd
> [ 2.002995] Console: switching to colour frame buffer device 320x90
> [ 2.016156] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
> [ 2.016159] usb 2-7: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 2.029636] Bluetooth: hci0: read Intel version: 370710018002030d00
> [ 2.029651] bluetooth hci0: Direct firmware load for
> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq failed with error -2
> [ 2.029653] Bluetooth: hci0 failed to open Intel firmware file:
> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2)
> [ 2.029661] bluetooth hci0: Direct firmware load for
> intel/ibt-hw-37.7.bseq failed with error -2
> [ 2.029662] Bluetooth: hci0 failed to open default Intel fw file:
> intel/ibt-hw-37.7.bseq
> [ 2.117813] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
> buttons: 3/3
> [ 2.162388] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 2.164476] console [netcon0] enabled
> [ 2.166461] netconsole: network logging started
> [ 2.169571] PM: Hibernation image not present or could not be loaded.
> [ 2.169576] ALSA device list:
> [ 2.171571] No soundcards found.
> [ 2.175327] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSCKGF18
> LSTi PQ: 0 ANSI: 5
> [ 2.190402] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180
> GB/168 GiB)
> [ 2.190411] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 2.196003] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 2.199406] sd 0:0:0:0: [sda] Write Protect is off
> [ 2.202721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.202761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 2.208859] sda: sda1 sda2 sda3
> [ 2.210887] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.330247] clocksource: Switched to clocksource tsc
> [ 2.334213] input: TPPS/2 IBM TrackPoint as
> /devices/platform/i8042/serio1/serio2/input/input7
> [ 2.416442] EXT4-fs (sda3): couldn't mount as ext3 due to feature
> incompatibilities
> [ 2.425152] EXT4-fs (sda3): mounted filesystem with ordered data mode.
> Opts: (null)
> [ 2.426963] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
> [ 2.428912] devtmpfs: mounted
> [ 2.431403] Freeing unused kernel memory: 1084K (ffffffff81f14000 -
> ffffffff82023000)
> [ 2.432636] Write protecting the kernel read-only data: 14336k
> [ 2.434250] Freeing unused kernel memory: 1228K (ffff8800018cd000 -
> ffff880001a00000)
> [ 2.438522] Freeing unused kernel memory: 1328K (ffff880001cb4000 -
> ffff880001e00000)
> [ 2.493209] setfont (1160) used greatest stack depth: 13656 bytes left
> [ 2.522615] init-early.sh (1159) used greatest stack depth: 13048 bytes
> left
> [ 2.903608] systemd-udevd[1373]: starting version 218
> [ 2.907958] systemd-udevd[1373]: Network interface NamePolicy= disabled
> on kernel command line, ignoring.
> [ 2.908114] random: systemd-udevd urandom read with 38 bits of entropy
> available
> [ 3.016335] thinkpad_acpi: ThinkPad ACPI Extras v0.25
> [ 3.016339] thinkpad_acpi: http://ibm-acpi.sf.net/
> [ 3.016341] thinkpad_acpi: ThinkPad BIOS GRET46WW (1.23 ), EC unknown
> [ 3.016342] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model
> 20A7005MGE
> [ 3.017094] thinkpad_acpi: unknown version of the HKEY interface: 0x200
> [ 3.017097] thinkpad_acpi: please report this to
> ibm-acpi-devel@lists.sourceforge.net
> [ 3.017105] thinkpad_acpi: radio switch found; radios are enabled
> [ 3.017121] thinkpad_acpi: This ThinkPad has standard ACPI backlight
> brightness control, supported by the ACPI video driver
> [ 3.017122] thinkpad_acpi: Disabling thinkpad-acpi brightness events by
> default...
> [ 3.018688] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
> unblocked
> [ 3.019369] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is
> unblocked
> [ 3.019849] systemd-udevd[1374]: Network interface NamePolicy= disabled
> on kernel command line, ignoring.
> [ 3.020801] thinkpad_acpi: warning: userspace override of important
> firmware LEDs is enabled
> [ 3.022038] input: ThinkPad Extra Buttons as
> /devices/platform/thinkpad_acpi/input/input9
> [ 3.022538] systemd-udevd (1407) used greatest stack depth: 12944 bytes
> left
> [ 3.046029] Intel(R) Wireless WiFi driver for Linux
> [ 3.046032] Copyright(c) 2003- 2015 Intel Corporation
> [ 3.049928] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
> 0xffffffff81a84050)
> [ 3.061421] iwlwifi 0000:03:00.0: loaded firmware version 17.265642.0
> op_mode iwlmvm
> [ 3.064140] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic:
> line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
> [ 3.064145] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0
> (0x0/0x0/0x0/0x0/0x0)
> [ 3.064148] snd_hda_codec_generic hdaudioC1D0: hp_outs=1
> (0x15/0x0/0x0/0x0/0x0)
> [ 3.064150] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
> [ 3.064151] snd_hda_codec_generic hdaudioC1D0: inputs:
> [ 3.064154] snd_hda_codec_generic hdaudioC1D0: Mic=0x1a
> [ 3.064156] snd_hda_codec_generic hdaudioC1D0: Internal Mic=0x12
> [ 3.068860] input: HDA Intel PCH Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
> [ 3.068965] snd_hda_intel 0000:00:03.0: Too many HDMI devices
> [ 3.068969] snd_hda_intel 0000:00:03.0: Consider building the kernel with
> CONFIG_SND_DYNAMIC_MINORS=y
> [ 3.069120] input: HDA Intel PCH Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
> [ 3.069343] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC
> 7260, REV=0x144
> [ 3.069833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
> [ 3.070499] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
> [ 3.071665] input: HDA Intel HDMI HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:03.0/sound/card0/input12
> [ 3.072275] input: HDA Intel HDMI HDMI/DP,pcm=7 as
> /devices/pci0000:00/0000:00:03.0/sound/card0/input13
> [ 3.072467] input: HDA Intel HDMI HDMI/DP as
> /devices/pci0000:00/0000:00:03.0/sound/card0/input14
> [ 3.091091] cdc_ncm 2-4:1.0: MAC-Address: ff:ff:ff:ff:ff:ff
> [ 3.091096] cdc_ncm 2-4:1.0: setting rx_max = 16384
> [ 3.091872] cdc_ncm 2-4:1.0 usb0: register 'cdc_ncm' at
> usb-0000:00:14.0-4, CDC NCM, ff:ff:ff:ff:ff:ff
> [ 3.091903] usbcore: registered new interface driver cdc_ncm
> [ 3.277887] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
> [ 3.438586] EXT4-fs (sda3): re-mounted. Opts: (null)
> [ 3.528197] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1
> across:2097148k SS
> [ 5.869460] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
> [ 5.870078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
> [ 6.062495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
> [ 6.063115] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
> [ 6.092691] ip (2349) used greatest stack depth: 12192 bytes left
> [ 8.685944] random: nonblocking pool is initialized
> [ 9.368752] wlan0: authenticate with e4:f4:c6:0a:bb:8b
> [ 9.372797] wlan0: send auth to e4:f4:c6:0a:bb:8b (try 1/3)
> [ 9.373419] wlan0: authenticated
> [ 9.374132] wlan0: associate with e4:f4:c6:0a:bb:8b (try 1/3)
> [ 9.375186] wlan0: RX AssocResp from e4:f4:c6:0a:bb:8b (capab=0x1011
> status=0 aid=1)
> [ 9.376508] wlan0: associated
> [ 55.030187] usb 2-2: new high-speed USB device number 5 using xhci_hcd
> [ 55.194925] usb 2-2: New USB device found, idVendor=2040, idProduct=0264
> [ 55.194934] usb 2-2: New USB device strings: Mfr=3, Product=1,
> SerialNumber=2
> [ 55.194939] usb 2-2: Product: soloHD
> [ 55.194942] usb 2-2: Manufacturer: HCW
> [ 55.194945] usb 2-2: SerialNumber: 0011548565
> [ 55.386950] em28xx: New device HCW soloHD @ 480 Mbps (2040:0264,
> interface 0, class 0)
> [ 55.386956] em28xx: DVB interface 0 found: isoc
> [ 55.387013] em28xx: chip ID is em28178
> [ 57.321297] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xcce4cb04
> [ 57.321304] em28178 #0: EEPROM info:
> [ 57.321307] em28178 #0: microcode start address = 0x0004, boot
> configuration = 0x01
> [ 57.328249] em28178 #0: AC97 audio (5 sample rates)
> [ 57.328256] em28178 #0: 500mA max power
> [ 57.328260] em28178 #0: Table at offset 0x27, strings=0x0e6a,
> 0x1888, 0x087e
> [ 57.328360] em28178 #0: Identified as PCTV tripleStick (292e) (card=94)
> [ 57.328366] em28178 #0: dvb set to isoc mode.
> [ 57.328423] usbcore: registered new interface driver em28xx
> [ 57.335752] em28178 #0: Binding DVB extension
> [ 57.338179] i2c i2c-11: Added multiplexed i2c bus 12
> [ 57.338185] si2168 11-0064: Silicon Labs Si2168 successfully attached
> [ 57.340481] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158
> successfully attached
> [ 57.340490] DVB: registering new adapter (em28178 #0)
> [ 57.340494] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs
> Si2168)...
> [ 57.340896] em28178 #0: DVB extension successfully initialized
> [ 57.340901] em28xx: Registered (Em28xx dvb Extension) extension
> [ 57.343406] em28178 #0: Registering input extension
> [ 57.343526] Registered IR keymap rc-pinnacle-pctv-hd
> [ 57.343608] input: em28xx IR (em28178 #0) as
> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0/input15
> [ 57.343680] rc rc0: em28xx IR (em28178 #0) as
> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0
> [ 57.343787] em28178 #0: Input extension successfully initalized
> [ 57.343789] em28xx: Registered (Em28xx Input Extension) extension
> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
> [ 101.428693] si2168 11-0064: downloading firmware from file
> 'dvb-demod-si2168-b40-01.fw'
> [ 101.657999] si2168 11-0064: firmware version: 4.0.11
> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
> [ 101.709738] si2157 12-0060: firmware version: 3.0.5
>
>
> Another thing. At the end of w_scan i get:
>
> tune to: QAM_16 f = 778000 kHz I999B8C23D0T8G8Y0 (8468:12297:2305) (time:
> 05:43.352)
> service = 1-2-3.tv (MEDIA BROADCAST)
> service = RTLNITRO (MEDIA BROADCAST)
> service = TLC (MEDIA BROADCAST)
> service = JuweloSK (MEDIA BROADCAST)
> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
> (8468:12352:16481) (time: 05:57.355)
> ----------no signal----------
> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
> (8468:12352:16481) (time: 06:03.441) (no signal)
> ----------no signal----------
> tune to: QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 (8468:12352:16497)
> (time: 06:09.478)
> updating transponder:
> (QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
> (8468:12352:16481)) 0x0000
> to (QAM_AUTO f = 650000 kHz I999B8C0D0T32G16Y0P0 (8468:12352:16481))
> 0x4004
> service = ssu (Harmonic)
> service = multithek dvb-t (Internet) (Media Broadcast)
> tune to: QAM_64 f = 578000 kHz I999B8C23D0T8G4Y0 (8468:12348:15361) (time:
> 06:25.355)
> ----------no signal----------
> tune to: QAM_AUTO f = 578000 kHz I999B8C999D0T999G999Y0 (8468:12348:15361)
> (time: 06:31.436) (no signal)
> ----------no signal----------
> tune to: QAM_16 f = 730000 kHz I999B8C34D0T8G4Y0 (8468:12361:18689) (time:
> 06:37.533)
> ----------no signal----------
> tune to: QAM_AUTO f = 730000 kHz I999B8C999D0T999G999Y0 (8468:12361:18689)
> (time: 06:43.620) (no signal)
> ----------no signal----------
> tune to: QAM_16 f = 762000 kHz I999B8C23D0T8G4Y0 (8468:12368:20481) (time:
> 06:49.706)
> ----------no signal----------
> tune to: QAM_AUTO f = 762000 kHz I999B8C999D0T999G999Y0 (8468:12368:20481)
> (time: 06:55.793) (no signal)
> ----------no signal----------
> retrying with center_frequency = 514000000
> tune to: QAM_16 f = 514000 kHz I999B8C23D0T8G4Y0 (8468:12306:4609) (time:
> 07:01.879)
> ----------no signal----------
> tune to: QAM_AUTO f = 514000 kHz I999B8C999D0T999G999Y0 (8468:12306:4609)
> (time: 07:07.964) (no signal)
> ----------no signal----------
> tune to: QAM_64 f = 474000 kHz I999B8C23D0T8G4Y0 (8468:12346:14849) (time:
> 07:14.051)
> ----------no signal----------
> tune to: QAM_AUTO f = 474000 kHz I999B8C999D0T999G999Y0 (8468:12346:14849)
> (time: 07:20.138) (no signal)
> ----------no signal----------
> (time: 07:26.222) dumping lists (57 services)
>
> Is that helping?
>
> thanks again.
>
> t.
>
>
>
> On 2016-06-18 18:56, Olli Salonen wrote:
>>
>> Hi Thomas,
>>
>> Please reboot your PC, run w_scan and then send the full output of
>> dmesg command. Maybe the driver has printed something in the logs that
>> can help us narrow the cause.
>>
>> Cheers,
>> -olli
>>
>> On 18 June 2016 at 18:55, Thomas Stein <himbeere@meine-oma.de> wrote:
>>>
>>> Hello.
>>>
>>> I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw
>>> there is general support already in the kernel.
>>>
>>> https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc
>>>
>>> I'm able to use this device for dvb-t but not dvb-t2. I'm living in
>>> berlin
>>> so it should work. w_scan is scanning dvb-t2 and seems
>>> to find channels:
>>>
>>> Scanning DVB-T2...
>>> Scanning 7MHz frequencies...
>>> 177500: (time: 02:17.828)
>>> 184500: (time: 02:19.828)
>>> 191500: (time: 02:21.876)
>>> 198500: (time: 02:23.924)
>>> 205500: (time: 02:25.971)
>>> 212500: (time: 02:27.971)
>>> 219500: (time: 02:30.021)
>>> 226500: (time: 02:32.071)
>>> Scanning 8MHz frequencies...
>>> 474000: (time: 02:34.120)
>>> 482000: (time: 02:36.121)
>>> 490000: (time: 02:38.169)
>>> 498000: (time: 02:40.219)
>>> 506000: skipped (already known transponder)
>>> 514000: (time: 02:42.268)
>>> 522000: skipped (already known transponder)
>>> 530000: (time: 02:44.318)
>>> 538000: (time: 02:46.368)
>>> 546000: (time: 02:48.417)
>>> 554000: (time: 02:50.417)
>>> 562000: (time: 02:52.467)
>>> 570000: skipped (already known transponder)
>>> 578000: (time: 02:54.467)
>>> 586000: (time: 02:56.469)
>>> 594000: (time: 02:58.469)
>>> 602000: (time: 03:00.518)
>>> 610000: (time: 03:02.567)
>>> 618000: skipped (already known transponder)
>>> 626000: (time: 03:04.617)
>>> 634000: (time: 03:06.617)
>>> 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz
>>> I999B8C999D999T999G999Y999P0 (0:0:0)
>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) :
>>> updating transport_stream_id: -> (0:0:16481)
>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481)
>>> :
>>> updating network_id -> (0:12352:16481)
>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>>> (0:12352:16481)
>>> : updating original_network_id -> (8468:12352:16481)
>>> updating transponder:
>>> (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>>> (8468:12352:16481)) 0x0000
>>> to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
>>> (8468:12352:16481)) 0x4004
>>> new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1
>>> (8468:12352:16497)) 0x4004
>>> 650000: skipped (already known transponder)
>>> 658000: skipped (already known transponder)
>>> 666000: (time: 03:10.382)
>>> 674000: (time: 03:12.429)
>>> 682000: skipped (already known transponder)
>>> 690000: (time: 03:14.476)
>>> 698000: (time: 03:16.528)
>>> 706000: skipped (already known transponder)
>>> 714000: (time: 03:18.575)
>>> 722000: (time: 03:20.623)
>>> 730000: (time: 03:22.669)
>>> 738000: (time: 03:24.716)
>>> 746000: (time: 03:26.764)
>>> 754000: skipped (already known transponder)
>>> 762000: (time: 03:28.811)
>>> 770000: (time: 03:30.860)
>>> 778000: skipped (already known transponder)
>>> 786000: (time: 03:32.908)
>>> 794000: (time: 03:34.953)
>>> 802000: (time: 03:36.999)
>>> 810000: (time: 03:39.045)
>>> 818000: (time: 03:41.045)
>>> 826000: (time: 03:43.091)
>>> 834000: (time: 03:45.137)
>>> 842000: (time: 03:47.185)
>>> 850000: (time: 03:49.231)
>>> 858000: (time: 03:51.277)
>>>
>>> So the question is, what is going wrong? When i start vlc with dvb-t2
>>> channels file for berlin i get:
>>>
>>> [00007f7e0c01a0e8] ts demux error: cannot peek
>>>
>>> Any hints appreciated.
>>>
>>> cheers
>>> t.
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb usb stick Hauppauge WinTV-soloHD
2016-06-22 19:10 ` Olli Salonen
@ 2016-06-22 19:25 ` Olli Salonen
2016-06-23 7:08 ` Thomas Stein
0 siblings, 1 reply; 6+ messages in thread
From: Olli Salonen @ 2016-06-22 19:25 UTC (permalink / raw)
To: Thomas Stein; +Cc: linux-media
Hi Thomas,
I made some more investigation and figured out that you have a DVB-T2
mux at 642 MHz in Berlin, and can also see that your w_scan actually
locks on that DVB-T2 mux as you wrote. Sorry, I did not read properly
what you were saying in the beginning.
Then it should be just a question of finding software that will work
with your DVB-T2 channels as well. I've got no experience of VLC, but
as far as I have understood it should support DVB-T2 as well. I've
used dvbv5-zap and tvheadend with good success, but there are many
others as well. Basically it is important the software implements the
version 5 of the DVB API (DVBv5) instead of the older version 3.
Cheers,
-olli
On 22 June 2016 at 22:10, Olli Salonen <olli.salonen@iki.fi> wrote:
> Hi Thomas,
>
> Ok, the correct firmwares are there:
> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
> [ 101.428693] si2168 11-0064: downloading firmware from file
> 'dvb-demod-si2168-b40-01.fw'
> [ 101.657999] si2168 11-0064: firmware version: 4.0.11
> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
> [ 101.709738] si2157 12-0060: firmware version: 3.0.5
>
> Basically everything looks good. Does this work on a Windows computer
> using the same antenna cable and the same USB tuner?
>
> DVB-T2 support in w_scan has been evolving also, so make sure you've
> got quite recent version.
>
> I've found that dvbv5-scan does the best job when scanning for
> channels. However that needs initial scan table to start with. The
> initial scan tables for Berlin don't seem to contain any DVB-T2 muxes
> though: https://git.linuxtv.org/dtv-scan-tables.git/tree/dvb-t/de-Berlin
> This means they're probably a bit out of date. If you know the DVB-T2
> mux details, you can add them yourself and try dvbv5-scan.
>
> Cheers,
> -olli
>
> On 18 June 2016 at 20:17, Thomas Stein <himbeere@meine-oma.de> wrote:
>> Hi Olli.
>>
>> Thanks for your answer.
>>
>> Here we go.
>>
>> [ 0.000000] Linux version 4.6.2 (root@rather) (gcc version 5.3.0 (Gentoo
>> 5.3.0 p1.0, pie-0.6.5) ) #3 SMP Sat Jun 18 13:34:40 CEST 2016
>> [ 0.000000] Command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3 ro
>> net.ifnames=0
>> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
>> registers'
>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
>> bytes, using 'standard' format.
>> [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
>> [ 0.000000] e820: BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
>> [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce20ffff] usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000ce210000-0x00000000dcd3efff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI
>> NVS
>> [ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI
>> data
>> [ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dfa0ffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff]
>> reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] SMBIOS 2.7 present.
>> [ 0.000000] DMI: LENOVO 20A7005MGE/20A7005MGE, BIOS GRET46WW (1.23 )
>> 11/04/2015
>> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>> [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
>> [ 0.000000] MTRR default type: write-back
>> [ 0.000000] MTRR fixed ranges enabled:
>> [ 0.000000] 00000-9FFFF write-back
>> [ 0.000000] A0000-BFFFF uncachable
>> [ 0.000000] C0000-FFFFF write-protect
>> [ 0.000000] MTRR variable ranges enabled:
>> [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
>> [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
>> [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
>> [ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable
>> [ 0.000000] 4 disabled
>> [ 0.000000] 5 disabled
>> [ 0.000000] 6 disabled
>> [ 0.000000] 7 disabled
>> [ 0.000000] 8 disabled
>> [ 0.000000] 9 disabled
>> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
>> [ 0.000000] e820: last_pfn = 0xce210 max_arch_pfn = 0x400000000
>> [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at
>> [ffff8800000f0100]
>> [ 0.000000] Scanning 1 areas for low memory corruption
>> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>> [ 0.000000] Using GB pages for direct mapping
>> [ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE
>> [ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE
>> [ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE
>> [ 0.000000] BRK [0x02104000, 0x02104fff] PGTABLE
>> [ 0.000000] ACPI: Early table checksum verification disabled
>> [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
>> [ 0.000000] ACPI: XSDT 0x00000000DCEFE170 0000C4 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: DSDT 0x00000000DCEDF000 013476 (v01 LENOVO TP-GR
>> 00001230 INTL 20120711)
>> [ 0.000000] ACPI: FACS 0x00000000DCE6A000 000040
>> [ 0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000001)
>> [ 0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1
>> 00000100 INTL 20120711)
>> [ 0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2
>> 00000200 INTL 20120711)
>> [ 0.000000] ACPI: SSDT 0x00000000DCEDE000 0009CB (v01 LENOVO SataAhci
>> 00001000 INTL 20120711)
>> [ 0.000000] ACPI: SSDT 0x00000000DCEDD000 0007F5 (v01 LENOVO Cpu0Ist
>> 00003000 INTL 20120711)
>> [ 0.000000] ACPI: SSDT 0x00000000DCEDC000 000AD8 (v01 LENOVO CpuPm
>> 00003000 INTL 20120711)
>> [ 0.000000] ACPI: SSDT 0x00000000DCEDA000 00125C (v01 LENOVO SaSsdt
>> 00003000 INTL 20120711)
>> [ 0.000000] ACPI: UEFI 0x00000000DCED9000 000042 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: MSDM 0x00000000DCE44000 000055 (v03 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: BATB 0x00000000DCED8000 000046 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: FPDT 0x00000000DCED7000 000064 (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: UEFI 0x00000000DCED6000 0002CE (v01 LENOVO TP-GR
>> 00001230 PTEC 00000002)
>> [ 0.000000] ACPI: SSDT 0x00000000DCED5000 00047F (v01 LENOVO IsctTabl
>> 00001000 INTL 20120711)
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
>> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
>> [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
>> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce20ffff]
>> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff]
>> [ 0.000000] Initmem setup node 0 [mem
>> 0x0000000000001000-0x000000021f5fffff]
>> [ 0.000000] On node 0 totalpages: 2021292
>> [ 0.000000] DMA zone: 64 pages used for memmap
>> [ 0.000000] DMA zone: 21 pages reserved
>> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
>> [ 0.000000] DMA32 zone: 13129 pages used for memmap
>> [ 0.000000] DMA32 zone: 840208 pages, LIFO batch:31
>> [ 0.000000] Normal zone: 18392 pages used for memmap
>> [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
>> [ 0.000000] Reserving Intel graphics stolen memory at
>> 0xdda00000-0xdf9fffff
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
>> 0-39
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xce210000-0xdcd3efff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdfa0ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa10000-0xf7ffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>> [ 0.000000] e820: [mem 0xdfa10000-0xf7ffffff] available for PCI devices
>> [ 0.000000] Booting paravirtualized kernel on bare hardware
>> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 1910969940391419 ns
>> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
>> nr_node_ids:1
>> [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88021f200000 s91288 r8192
>> d31592 u262144
>> [ 0.000000] pcpu-alloc: s91288 r8192 d31592 u262144 alloc=1*2097152
>> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
>> pages: 1989686
>> [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3
>> ro net.ifnames=0
>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
>> bytes)
>> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
>> bytes)
>> [ 0.000000] Memory: 7861144K/8085168K available (8993K kernel code, 1099K
>> rwdata, 2768K rodata, 1084K init, 844K bss, 224024K reserved, 0K
>> cma-reserved)
>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] Build-time adjustment of leaf fanout to 64.
>> [ 0.000000] NR_IRQS:4352 nr_irqs:760 16
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
>> max_idle_ns: 133484882848 ns
>> [ 0.000000] hpet clockevent registered
>> [ 0.000000] tsc: Fast TSC calibration using PIT
>> [ 0.000000] tsc: Detected 2294.638 MHz processor
>> [ 0.000003] Calibrating delay loop (skipped), value calculated using
>> timer frequency.. 4589.27 BogoMIPS (lpj=2294638)
>> [ 0.000196] pid_max: default: 32768 minimum: 301
>> [ 0.000292] ACPI: Core revision 20160108
>> [ 0.021433] ACPI: 8 ACPI AML tables successfully acquired and loaded
>>
>> [ 0.021689] Security Framework initialized
>> [ 0.021789] Mount-cache hash table entries: 16384 (order: 5, 131072
>> bytes)
>> [ 0.021890] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
>> bytes)
>> [ 0.022281] CPU: Physical Processor ID: 0
>> [ 0.022373] CPU: Processor Core ID: 0
>> [ 0.022467] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>> [ 0.022564] ENERGY_PERF_BIAS: View and update with
>> x86_energy_perf_policy(8)
>> [ 0.022676] mce: CPU supports 7 MCE banks
>> [ 0.022783] CPU0: Thermal monitoring enabled (TM1)
>> [ 0.022887] process: using mwait in idle threads
>> [ 0.022983] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>> [ 0.023080] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>> [ 0.023758] Freeing SMP alternatives memory: 36K (ffffffff82023000 -
>> ffffffff8202c000)
>> [ 0.032425] smpboot: Max logical packages: 4
>> [ 0.032521] smpboot: APIC(0) Converting physical 0 to logical package
>> 0
>> [ 0.033235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.043337] TSC deadline timer enabled
>> [ 0.043341] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
>> (family: 0x6, model: 0x45, stepping: 0x1)
>> [ 0.043632] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events,
>> full-width counters, Intel PMU driver.
>> [ 0.044008] ... version: 3
>> [ 0.044102] ... bit width: 48
>> [ 0.044194] ... generic registers: 4
>> [ 0.044287] ... value mask: 0000ffffffffffff
>> [ 0.044384] ... max period: 0000ffffffffffff
>> [ 0.044481] ... fixed-purpose events: 3
>> [ 0.044573] ... event mask: 000000070000000f
>> [ 0.045021] x86: Booting SMP configuration:
>> [ 0.046155] .... node #0, CPUs: #1 #2 #3
>> [ 0.232523] x86: Booted up 1 node, 4 CPUs
>> [ 0.232705] smpboot: Total of 4 processors activated (18376.56 BogoMIPS)
>> [ 0.238513] devtmpfs: initialized
>> [ 0.238861] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff]
>> (1310720 bytes)
>> [ 0.239128] kworker/u16:0 (29) used greatest stack depth: 14280 bytes
>> left
>> [ 0.239130] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 1911260446275000 ns
>> [ 0.239257] RTC time: 19:01:15, date: 06/18/16
>> [ 0.239394] NET: Registered protocol family 16
>> [ 0.244260] cpuidle: using governor ladder
>> [ 0.250272] cpuidle: using governor menu
>> [ 0.250438] ACPI FADT declares the system doesn't support PCIe ASPM, so
>> disable it
>> [ 0.250584] ACPI: bus type PCI registered
>> [ 0.250845] PCI: Using configuration type 1 for base access
>> [ 0.250990] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>> [ 0.254230] kworker/u16:2 (278) used greatest stack depth: 14184 bytes
>> left
>> [ 0.254429] kworker/u16:1 (290) used greatest stack depth: 14160 bytes
>> left
>> [ 0.259563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 0.259852] ACPI: Added _OSI(Module Device)
>> [ 0.259948] ACPI: Added _OSI(Processor Device)
>> [ 0.260043] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 0.260139] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 0.260523] ACPI : EC: EC description table is found, configuring boot EC
>> [ 0.260640] ACPI : EC: EC started
>> [ 0.268034] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>> [ 0.270402] ACPI: Dynamic OEM Table Load:
>> [ 0.270590] ACPI: SSDT 0xFFFF880215F52800 000436 (v01 PmRef Cpu0Cst
>> 00003001 INTL 20120711)
>> [ 0.271758] ACPI: Dynamic OEM Table Load:
>> [ 0.271943] ACPI: SSDT 0xFFFF880215F53000 0005AA (v01 PmRef ApIst
>> 00003000 INTL 20120711)
>> [ 0.273168] ACPI: Dynamic OEM Table Load:
>> [ 0.273351] ACPI: SSDT 0xFFFF8800C9F61800 000119 (v01 PmRef ApCst
>> 00003000 INTL 20120711)
>> [ 0.275037] ACPI: Interpreter enabled
>> [ 0.275160] ACPI: (supports S0 S3 S4 S5)
>> [ 0.275255] ACPI: Using IOAPIC for interrupt routing
>> [ 0.275385] PCI: Using host bridge windows from ACPI; if necessary, use
>> "pci=nocrs" and report a bug
>> [ 0.278879] ACPI: Power Resource [PUBS] (on)
>> [ 0.284147] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>> [ 0.284743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
>> [ 0.285327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
>> [ 0.285914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
>> [ 0.286499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>> [ 0.287066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0,
>> disabled.
>> [ 0.287777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
>> [ 0.288359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
>> [ 0.288961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>> [ 0.289067] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments
>> MSI]
>> [ 0.289241] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires
>> [ExtendedConfig ASPM ClockPM MSI]
>> [ 0.289450] PCI host bridge to bus 0000:00
>> [ 0.289547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
>> [ 0.289653] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
>> [ 0.289756] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
>> window]
>> [ 0.289900] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff
>> window]
>> [ 0.290045] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff
>> window]
>> [ 0.290190] pci_bus 0000:00: root bus resource [bus 00-3f]
>> [ 0.290295] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
>> [ 0.290406] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
>> [ 0.290423] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
>> [ 0.290432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
>> pref]
>> [ 0.290438] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
>> [ 0.290540] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
>> [ 0.290551] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit]
>> [ 0.290680] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
>> [ 0.290699] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit]
>> [ 0.290766] pci 0000:00:14.0: PME# supported from D3hot D3cold
>> [ 0.290805] pci 0000:00:14.0: System wakeup disabled by ACPI
>> [ 0.290951] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
>> [ 0.290970] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f 64bit]
>> [ 0.291039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>> [ 0.291123] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
>> [ 0.291139] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
>> [ 0.291148] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
>> [ 0.291157] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
>> [ 0.291218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>> [ 0.291256] pci 0000:00:19.0: System wakeup disabled by ACPI
>> [ 0.291402] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
>> [ 0.291418] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit]
>> [ 0.291488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> [ 0.291568] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
>> [ 0.291644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> [ 0.291781] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
>> [ 0.291858] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>> [ 0.291936] pci 0000:00:1c.1: System wakeup disabled by ACPI
>> [ 0.292088] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
>> [ 0.292108] pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
>> [ 0.292202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>> [ 0.292242] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> [ 0.292387] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
>> [ 0.292578] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
>> [ 0.292593] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
>> [ 0.292601] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
>> [ 0.292609] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
>> [ 0.292617] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
>> [ 0.292625] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
>> [ 0.292634] pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff]
>> [ 0.292677] pci 0000:00:1f.2: PME# supported from D3hot
>> [ 0.292752] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
>> [ 0.292767] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit]
>> [ 0.292789] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
>> [ 0.292925] pci 0000:00:1c.0: PCI bridge to [bus 02]
>> [ 0.293235] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
>> [ 0.293319] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
>> [ 0.293685] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>> [ 0.295818] pci 0000:00:1c.1: PCI bridge to [bus 03]
>> [ 0.295919] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
>> [ 0.295938] pci_bus 0000:00: on NUMA node 0
>> [ 0.296986] ACPI: Enabled 4 GPEs in block 00 to 7F
>> [ 0.297271] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data =
>> 0x62
>> [ 0.297481] vgaarb: setting as boot device: PCI:0000:00:02.0
>> [ 0.297582] vgaarb: device added:
>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 0.297734] vgaarb: loaded
>> [ 0.297825] vgaarb: bridge control possible 0000:00:02.0
>> [ 0.298025] SCSI subsystem initialized
>> [ 0.298181] libata version 3.00 loaded.
>> [ 0.298196] ACPI: bus type USB registered
>> [ 0.298327] usbcore: registered new interface driver usbfs
>> [ 0.298446] usbcore: registered new interface driver hub
>> [ 0.298571] usbcore: registered new device driver usb
>> [ 0.298708] Linux video capture interface: v2.00
>> [ 0.298844] pps_core: LinuxPPS API ver. 1 registered
>> [ 0.298942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
>> Giometti <giometti@linux.it>
>> [ 0.299097] PTP clock support registered
>> [ 0.299269] Advanced Linux Sound Architecture Driver Initialized.
>> [ 0.299386] PCI: Using ACPI for IRQ routing
>> [ 0.299513] PCI: pci_cache_line_size set to 64 bytes
>> [ 0.299823] Expanded resource reserved due to conflict with PCI Bus
>> 0000:00
>> [ 0.299925] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
>> [ 0.299928] e820: reserve RAM buffer [mem 0xce210000-0xcfffffff]
>> [ 0.299930] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
>> [ 0.300102] Bluetooth: Core ver 2.21
>> [ 0.300204] NET: Registered protocol family 31
>> [ 0.300300] Bluetooth: HCI device and connection manager initialized
>> [ 0.300401] Bluetooth: HCI socket layer initialized
>> [ 0.300500] Bluetooth: L2CAP socket layer initialized
>> [ 0.300601] Bluetooth: SCO socket layer initialized
>> [ 0.300834] NetLabel: Initializing
>> [ 0.300930] NetLabel: domain hash size = 128
>> [ 0.301023] NetLabel: protocols = UNLABELED CIPSOv4
>> [ 0.301135] NetLabel: unlabeled traffic allowed by default
>> [ 0.301332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>> [ 0.301794] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>> [ 0.303929] clocksource: Switched to clocksource hpet
>> [ 0.310841] VFS: Disk quotas dquot_6.6.0
>> [ 0.310968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
>> bytes)
>> [ 0.311222] pnp: PnP ACPI init
>> [ 0.311820] system 00:00: [mem 0x00000000-0x0009ffff] could not be
>> reserved
>> [ 0.311936] system 00:00: [mem 0x000c0000-0x000c3fff] could not be
>> reserved
>> [ 0.312037] system 00:00: [mem 0x000c4000-0x000c7fff] could not be
>> reserved
>> [ 0.312138] system 00:00: [mem 0x000c8000-0x000cbfff] could not be
>> reserved
>> [ 0.312239] system 00:00: [mem 0x000cc000-0x000cffff] could not be
>> reserved
>> [ 0.312340] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>> [ 0.312441] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>> [ 0.312541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>> [ 0.312641] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>> [ 0.312741] system 00:00: [mem 0x000e0000-0x000e3fff] could not be
>> reserved
>> [ 0.312842] system 00:00: [mem 0x000e4000-0x000e7fff] could not be
>> reserved
>> [ 0.312952] system 00:00: [mem 0x000e8000-0x000ebfff] could not be
>> reserved
>> [ 0.313053] system 00:00: [mem 0x000ec000-0x000effff] could not be
>> reserved
>> [ 0.313154] system 00:00: [mem 0x000f0000-0x000fffff] could not be
>> reserved
>> [ 0.313255] system 00:00: [mem 0x00100000-0xdf9fffff] could not be
>> reserved
>> [ 0.313356] system 00:00: [mem 0xfec00000-0xffffffff] could not be
>> reserved
>> [ 0.313461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>> [ 0.313610] pnp 00:01: [Firmware Bug]: PNP resource [mem
>> 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending
>> to [mem 0xfed10000-0xfed17fff]
>> [ 0.313842] system 00:01: [io 0x1800-0x189f] could not be reserved
>> [ 0.313955] system 00:01: [io 0x0800-0x087f] has been reserved
>> [ 0.314055] system 00:01: [io 0x0880-0x08ff] has been reserved
>> [ 0.314154] system 00:01: [io 0x0900-0x097f] has been reserved
>> [ 0.314253] system 00:01: [io 0x0980-0x09ff] has been reserved
>> [ 0.314352] system 00:01: [io 0x0a00-0x0a7f] has been reserved
>> [ 0.314450] system 00:01: [io 0x0a80-0x0aff] has been reserved
>> [ 0.314549] system 00:01: [io 0x0b00-0x0b7f] has been reserved
>> [ 0.314647] system 00:01: [io 0x0b80-0x0bff] has been reserved
>> [ 0.314746] system 00:01: [io 0x15e0-0x15ef] has been reserved
>> [ 0.314844] system 00:01: [io 0x1600-0x167f] has been reserved
>> [ 0.314951] system 00:01: [io 0x1640-0x165f] has been reserved
>> [ 0.315051] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>> [ 0.315153] system 00:01: [mem 0x00000000-0x00000fff] could not be
>> reserved
>> [ 0.315254] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>> [ 0.315354] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
>> [ 0.315455] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>> [ 0.315555] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>> [ 0.315655] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>> [ 0.315756] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>> [ 0.315858] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 0.315937] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>> [ 0.315968] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303
>> (active)
>> [ 0.315995] pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13
>> (active)
>> [ 0.316527] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
>> [ 0.316631] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 0.316683] pnp: PnP ACPI: found 6 devices
>> [ 0.323875] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
>> max_idle_ns: 2085701024 ns
>> [ 0.324057] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
>> 02] add_size 1000
>> [ 0.324061] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
>> 64bit pref] to [bus 02] add_size 200000 add_align 100000
>> [ 0.324064] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
>> to [bus 02] add_size 200000 add_align 100000
>> [ 0.324079] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff]
>> res_to_dev_res add_size 200000 min_align 100000
>> [ 0.324081] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x002fffff]
>> res_to_dev_res add_size 200000 min_align 100000
>> [ 0.324084] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
>> pref] res_to_dev_res add_size 200000 min_align 100000
>> [ 0.324086] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit
>> pref] res_to_dev_res add_size 200000 min_align 100000
>> [ 0.324088] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res
>> add_size 1000 min_align 1000
>> [ 0.324091] pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res
>> add_size 1000 min_align 1000
>> [ 0.324096] pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfb00000-0xdfcfffff]
>> [ 0.324203] pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfd00000-0xdfefffff
>> 64bit pref]
>> [ 0.324351] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
>> [ 0.324453] pci 0000:00:1c.0: PCI bridge to [bus 02]
>> [ 0.324552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
>> [ 0.324654] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
>> [ 0.324758] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff
>> 64bit pref]
>> [ 0.324908] pci 0000:00:1c.1: PCI bridge to [bus 03]
>> [ 0.325017] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
>> [ 0.325126] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
>> [ 0.325128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
>> [ 0.325131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
>> window]
>> [ 0.325133] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff
>> window]
>> [ 0.325135] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff
>> window]
>> [ 0.325137] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
>> [ 0.325139] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
>> [ 0.325141] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit
>> pref]
>> [ 0.325143] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
>> [ 0.325183] NET: Registered protocol family 2
>> [ 0.325470] TCP established hash table entries: 65536 (order: 7, 524288
>> bytes)
>> [ 0.325725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> [ 0.325988] TCP: Hash tables configured (established 65536 bind 65536)
>> [ 0.326114] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>> [ 0.326238] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>> [ 0.326419] NET: Registered protocol family 1
>> [ 0.326594] RPC: Registered named UNIX socket transport module.
>> [ 0.326696] RPC: Registered udp transport module.
>> [ 0.326790] RPC: Registered tcp transport module.
>> [ 0.326885] RPC: Registered tcp NFSv4.1 backchannel transport module.
>> [ 0.327064] pci 0000:00:02.0: Video device with shadowed ROM at [mem
>> 0x000c0000-0x000dffff]
>> [ 0.327700] PCI: CLS 64 bytes, default 64
>> [ 0.327729] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [ 0.327832] software IO TLB [mem 0xca210000-0xce210000] (64MB) mapped at
>> [ffff8800ca210000-ffff8800ce20ffff]
>> [ 0.328082] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360
>> ms ovfl timer
>> [ 0.329310] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>> [ 0.329408] RAPL PMU: hw unit of domain package 2^-14 Joules
>> [ 0.329504] RAPL PMU: hw unit of domain dram 2^-14 Joules
>> [ 0.329601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>> [ 0.330119] Scanning for low memory corruption every 60 seconds
>> [ 0.330598] futex hash table entries: 2048 (order: 5, 131072 bytes)
>> [ 0.330737] audit: initializing netlink subsys (disabled)
>> [ 0.330844] audit: type=2000 audit(1466276474.314:1): initialized
>> [ 0.331567] workingset: timestamp_bits=60 max_order=21 bucket_order=0
>> [ 0.335140] NFS: Registering the id_resolver key type
>> [ 0.335246] Key type id_resolver registered
>> [ 0.335342] Key type id_legacy registered
>> [ 0.335501] fuse init (API version 7.24)
>> [ 0.336731] Block layer SCSI generic (bsg) driver version 0.4 loaded
>> (major 251)
>> [ 0.336885] io scheduler noop registered
>> [ 0.337038] io scheduler deadline registered
>> [ 0.337177] io scheduler cfq registered (default)
>> [ 0.337649] intel_idle: MWAIT substates: 0x11142120
>> [ 0.337652] intel_idle: v0.4.1 model 0x45
>> [ 0.337924] intel_idle: lapic_timer_reliable_states 0xffffffff
>> [ 0.338106] ACPI: AC Adapter [AC] (on-line)
>> [ 0.338281] input: Lid Switch as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>> [ 0.338560] ACPI: Lid Switch [LID]
>> [ 0.338697] input: Sleep Button as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>> [ 0.338852] ACPI: Sleep Button [SLPB]
>> [ 0.339076] input: Power Button as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>> [ 0.339229] ACPI: Power Button [PWRF]
>> [ 0.340623] thermal LNXTHERM:00: registered as thermal_zone0
>> [ 0.340724] ACPI: Thermal Zone [THM0] (45 C)
>> [ 0.340893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [ 0.341643] Non-volatile memory driver v1.3
>> [ 0.341812] Linux agpgart interface v0.103
>> [ 0.341990] [drm] Initialized drm 1.1.0 20060810
>> [ 0.342731] [drm] Memory usable by graphics device = 2048M
>> [ 0.342883] [drm] Replacing VGA console driver
>> [ 0.344095] Console: switching to colour dummy device 80x25
>> [ 0.349322] ACPI: Battery Slot [BAT0] (battery present)
>> [ 0.350072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [ 0.350078] [drm] Driver supports precise vblank timestamp query.
>> [ 0.350404] vgaarb: device changed decodes:
>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>> [ 0.389347] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
>> [ 0.389938] input: Video Bus as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>> [ 0.389997] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on
>> minor 0
>> [ 0.391982] loop: module loaded
>> [ 0.392110] ahci 0000:00:1f.2: version 3.0
>> [ 0.402379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1
>> impl SATA mode
>> [ 0.402393] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum
>> part deso sadm sds apst
>> [ 0.402925] scsi host0: ahci
>> [ 0.403073] scsi host1: ahci
>> [ 0.403179] scsi host2: ahci
>> [ 0.403233] ata1: SATA max UDMA/133 abar m2048@0xf053c000 port 0xf053c100
>> irq 41
>> [ 0.403240] ata2: DUMMY
>> [ 0.403244] ata3: DUMMY
>> [ 0.403383] e1000: Intel(R) PRO/1000 Network Driver - version
>> 7.3.21-k8-NAPI
>> [ 0.403389] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [ 0.403412] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>> [ 0.403417] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>> [ 0.403584] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set
>> to dynamic conservative mode
>> [ 0.566997] fbcon: inteldrmfb (fb0) is primary device
>> [ 0.706983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>> [ 0.719971] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
>> succeeded
>> [ 0.719974] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
>> filtered out
>> [ 0.722129] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
>> succeeded
>> [ 0.727893] ata1.00: supports DRM functions and may not be fully
>> accessible
>> [ 0.730026] ata1.00: ATA-9: INTEL SSDSCKGF180A4L, LSTi, max UDMA/133
>> [ 0.730029] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth
>> 31/32), AA
>> [ 0.750022] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
>> succeeded
>> [ 0.750024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
>> filtered out
>> [ 0.752120] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
>> succeeded
>> [ 0.757897] ata1.00: supports DRM functions and may not be fully
>> accessible
>> [ 0.767970] ata1.00: configured for UDMA/133
>> [ 0.826761] e1000e 0000:00:19.0 eth0: registered PHC clock
>> [ 0.826763] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
>> 54:ee:75:07:92:a9
>> [ 0.826764] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>> Connection
>> [ 0.826801] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
>> 1000FF-0FF
>> [ 0.826834] igb: Intel(R) Gigabit Ethernet Network Driver - version
>> 5.3.0-k
>> [ 0.826834] igb: Copyright (c) 2007-2014 Intel Corporation.
>> [ 0.826858] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
>> version 2.0.2-k
>> [ 0.826858] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
>> [ 0.826973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 0.826976] ehci-pci: EHCI PCI platform driver
>> [ 0.827128] ehci-pci 0000:00:1d.0: EHCI Host Controller
>> [ 0.827182] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
>> number 1
>> [ 0.827195] ehci-pci 0000:00:1d.0: debug port 2
>> [ 0.831108] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>> [ 0.831122] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000
>> [ 0.837021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>> [ 0.837071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 0.837072] usb usb1: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 0.837074] usb usb1: Product: EHCI Host Controller
>> [ 0.837075] usb usb1: Manufacturer: Linux 4.6.2 ehci_hcd
>> [ 0.837076] usb usb1: SerialNumber: 0000:00:1d.0
>> [ 0.837271] hub 1-0:1.0: USB hub found
>> [ 0.837279] hub 1-0:1.0: 3 ports detected
>> [ 0.837469] ehci-platform: EHCI generic platform driver
>> [ 0.837496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 0.837512] ohci-pci: OHCI PCI platform driver
>> [ 0.837537] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 0.837680] xhci_hcd 0000:00:14.0: xHCI Host Controller
>> [ 0.837736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
>> number 2
>> [ 0.838822] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
>> 0x100 quirks 0x0004b810
>> [ 0.838827] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>> [ 0.838910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 0.838911] usb usb2: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 0.838912] usb usb2: Product: xHCI Host Controller
>> [ 0.838913] usb usb2: Manufacturer: Linux 4.6.2 xhci-hcd
>> [ 0.838914] usb usb2: SerialNumber: 0000:00:14.0
>> [ 0.839063] hub 2-0:1.0: USB hub found
>> [ 0.839077] hub 2-0:1.0: 9 ports detected
>> [ 0.841021] xhci_hcd 0000:00:14.0: xHCI Host Controller
>> [ 0.841068] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
>> number 3
>> [ 0.841107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>> [ 0.841108] usb usb3: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 0.841110] usb usb3: Product: xHCI Host Controller
>> [ 0.841111] usb usb3: Manufacturer: Linux 4.6.2 xhci-hcd
>> [ 0.841112] usb usb3: SerialNumber: 0000:00:14.0
>> [ 0.841243] hub 3-0:1.0: USB hub found
>> [ 0.841254] hub 3-0:1.0: 4 ports detected
>> [ 0.842267] usbcore: registered new interface driver usblp
>> [ 0.842305] usbcore: registered new interface driver usb-storage
>> [ 0.842355] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
>> 0x60,0x64 irq 1,12
>> [ 0.844196] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 0.844200] serio: i8042 AUX port at 0x60,0x64 irq 12
>> [ 0.844360] mousedev: PS/2 mouse device common for all mice
>> [ 0.844656] rtc_cmos 00:02: RTC can wake from S4
>> [ 0.844821] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>> [ 0.844848] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram,
>> hpet irqs
>> [ 0.845003] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>> [ 0.845876] input: AT Translated Set 2 keyboard as
>> /devices/platform/i8042/serio0/input/input4
>> [ 0.846822] IR NEC protocol handler initialized
>> [ 0.846826] IR RC5(x/sz) protocol handler initialized
>> [ 0.846829] IR RC6 protocol handler initialized
>> [ 0.846833] IR JVC protocol handler initialized
>> [ 0.846836] IR Sony protocol handler initialized
>> [ 0.846840] IR SANYO protocol handler initialized
>> [ 0.846843] IR Sharp protocol handler initialized
>> [ 0.846847] IR MCE Keyboard/mouse protocol handler initialized
>> [ 0.846850] IR XMP protocol handler initialized
>> [ 0.846875] usbcore: registered new interface driver uvcvideo
>> [ 0.846876] USB Video Class driver (1.1.1)
>> [ 0.847024] Bluetooth: HCI UART driver ver 2.3
>> [ 0.847026] Bluetooth: HCI UART protocol H4 registered
>> [ 0.847026] Bluetooth: HCI UART protocol BCSP registered
>> [ 0.847027] Bluetooth: HCI UART protocol LL registered
>> [ 0.847028] Bluetooth: HCI UART protocol ATH3K registered
>> [ 0.847028] Bluetooth: HCI UART protocol Three-wire (H5) registered
>> [ 0.847048] usbcore: registered new interface driver btusb
>> [ 0.847088] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 0.847332] usbcore: registered new interface driver usbhid
>> [ 0.847333] usbhid: USB HID core driver
>> [ 0.847613] Netfilter messages via NETLINK v0.30.
>> [ 0.847630] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>> [ 0.847986] Initializing XFRM netlink socket
>> [ 0.847994] NET: Registered protocol family 17
>> [ 0.848034] Bluetooth: RFCOMM TTY layer initialized
>> [ 0.848037] Bluetooth: RFCOMM socket layer initialized
>> [ 0.848041] Bluetooth: RFCOMM ver 1.11
>> [ 0.848048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>> [ 0.848052] Bluetooth: HIDP socket layer initialized
>> [ 0.848083] Key type dns_resolver registered
>> [ 0.848373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
>> [ 0.848382] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
>> [ 0.848394] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
>> [ 0.848404] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
>> [ 0.848441] microcode: Microcode Update Driver: v2.01
>> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>> [ 0.848652] registered taskstats version 1
>> [ 0.849234] Magic number: 4:330:41
>> [ 0.849250] bdi 7:6: hash matches
>> [ 1.139039] usb 1-1: new high-speed USB device number 2 using ehci-pci
>> [ 1.194038] usb 2-4: new high-speed USB device number 2 using xhci_hcd
>> [ 1.253766] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
>> [ 1.253768] usb 1-1: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=0
>> [ 1.254036] hub 1-1:1.0: USB hub found
>> [ 1.254260] hub 1-1:1.0: 8 ports detected
>> [ 1.329990] psmouse serio1: synaptics: queried max coordinates: x
>> [..5112], y [..3834]
>> [ 1.330000] tsc: Refined TSC clocksource calibration: 2294.686 MHz
>> [ 1.330002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
>> 0x211399552f8, max_idle_ns: 440795292447 ns
>> [ 1.363006] psmouse serio1: synaptics: queried min coordinates: x
>> [1024..], y [1024..]
>> [ 1.363011] psmouse serio1: synaptics: quirked min/max coordinates: x
>> [1024..5112], y [2024..4832]
>> [ 1.365412] usb 2-4: New USB device found, idVendor=1199, idProduct=a001
>> [ 1.365414] usb 2-4: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=3
>> [ 1.365415] usb 2-4: Product: Sierra Wireless EM7345 4G LTE
>> [ 1.365417] usb 2-4: Manufacturer: Sierra Wireless Inc.
>> [ 1.365418] usb 2-4: SerialNumber: 013937000496677
>> [ 1.425952] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id:
>> 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id:
>> 1545510
>> [ 1.425980] psmouse serio1: synaptics: serio: Synaptics pass-through port
>> at isa0060/serio1/input0
>> [ 1.467198] input: SynPS/2 Synaptics TouchPad as
>> /devices/platform/i8042/serio1/input/input6
>> [ 1.530046] usb 1-1.8: new high-speed USB device number 3 using ehci-pci
>> [ 1.530963] usb 2-6: new full-speed USB device number 3 using xhci_hcd
>> [ 1.640531] usb 1-1.8: New USB device found, idVendor=04f2,
>> idProduct=b3f5
>> [ 1.640534] usb 1-1.8: New USB device strings: Mfr=3, Product=1,
>> SerialNumber=2
>> [ 1.640535] usb 1-1.8: Product: Integrated Camera
>> [ 1.640536] usb 1-1.8: Manufacturer: Chicony Electronics Co.,Ltd.
>> [ 1.640537] usb 1-1.8: SerialNumber: 0x0001
>> [ 1.642187] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b3f5)
>> [ 1.643866] input: Integrated Camera as
>> /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input8
>> [ 1.697658] usb 2-6: New USB device found, idVendor=138a, idProduct=0017
>> [ 1.697660] usb 2-6: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=1
>> [ 1.697661] usb 2-6: SerialNumber: 78916408f2b4
>> [ 1.851001] usb 2-7: new full-speed USB device number 4 using xhci_hcd
>> [ 2.002995] Console: switching to colour frame buffer device 320x90
>> [ 2.016156] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
>> [ 2.016159] usb 2-7: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=0
>> [ 2.029636] Bluetooth: hci0: read Intel version: 370710018002030d00
>> [ 2.029651] bluetooth hci0: Direct firmware load for
>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq failed with error -2
>> [ 2.029653] Bluetooth: hci0 failed to open Intel firmware file:
>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2)
>> [ 2.029661] bluetooth hci0: Direct firmware load for
>> intel/ibt-hw-37.7.bseq failed with error -2
>> [ 2.029662] Bluetooth: hci0 failed to open default Intel fw file:
>> intel/ibt-hw-37.7.bseq
>> [ 2.117813] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
>> buttons: 3/3
>> [ 2.162388] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>> [ 2.164476] console [netcon0] enabled
>> [ 2.166461] netconsole: network logging started
>> [ 2.169571] PM: Hibernation image not present or could not be loaded.
>> [ 2.169576] ALSA device list:
>> [ 2.171571] No soundcards found.
>> [ 2.175327] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSCKGF18
>> LSTi PQ: 0 ANSI: 5
>> [ 2.190402] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180
>> GB/168 GiB)
>> [ 2.190411] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 2.196003] sd 0:0:0:0: [sda] 4096-byte physical blocks
>> [ 2.199406] sd 0:0:0:0: [sda] Write Protect is off
>> [ 2.202721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 2.202761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
>> doesn't support DPO or FUA
>> [ 2.208859] sda: sda1 sda2 sda3
>> [ 2.210887] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 2.330247] clocksource: Switched to clocksource tsc
>> [ 2.334213] input: TPPS/2 IBM TrackPoint as
>> /devices/platform/i8042/serio1/serio2/input/input7
>> [ 2.416442] EXT4-fs (sda3): couldn't mount as ext3 due to feature
>> incompatibilities
>> [ 2.425152] EXT4-fs (sda3): mounted filesystem with ordered data mode.
>> Opts: (null)
>> [ 2.426963] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
>> [ 2.428912] devtmpfs: mounted
>> [ 2.431403] Freeing unused kernel memory: 1084K (ffffffff81f14000 -
>> ffffffff82023000)
>> [ 2.432636] Write protecting the kernel read-only data: 14336k
>> [ 2.434250] Freeing unused kernel memory: 1228K (ffff8800018cd000 -
>> ffff880001a00000)
>> [ 2.438522] Freeing unused kernel memory: 1328K (ffff880001cb4000 -
>> ffff880001e00000)
>> [ 2.493209] setfont (1160) used greatest stack depth: 13656 bytes left
>> [ 2.522615] init-early.sh (1159) used greatest stack depth: 13048 bytes
>> left
>> [ 2.903608] systemd-udevd[1373]: starting version 218
>> [ 2.907958] systemd-udevd[1373]: Network interface NamePolicy= disabled
>> on kernel command line, ignoring.
>> [ 2.908114] random: systemd-udevd urandom read with 38 bits of entropy
>> available
>> [ 3.016335] thinkpad_acpi: ThinkPad ACPI Extras v0.25
>> [ 3.016339] thinkpad_acpi: http://ibm-acpi.sf.net/
>> [ 3.016341] thinkpad_acpi: ThinkPad BIOS GRET46WW (1.23 ), EC unknown
>> [ 3.016342] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model
>> 20A7005MGE
>> [ 3.017094] thinkpad_acpi: unknown version of the HKEY interface: 0x200
>> [ 3.017097] thinkpad_acpi: please report this to
>> ibm-acpi-devel@lists.sourceforge.net
>> [ 3.017105] thinkpad_acpi: radio switch found; radios are enabled
>> [ 3.017121] thinkpad_acpi: This ThinkPad has standard ACPI backlight
>> brightness control, supported by the ACPI video driver
>> [ 3.017122] thinkpad_acpi: Disabling thinkpad-acpi brightness events by
>> default...
>> [ 3.018688] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
>> unblocked
>> [ 3.019369] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is
>> unblocked
>> [ 3.019849] systemd-udevd[1374]: Network interface NamePolicy= disabled
>> on kernel command line, ignoring.
>> [ 3.020801] thinkpad_acpi: warning: userspace override of important
>> firmware LEDs is enabled
>> [ 3.022038] input: ThinkPad Extra Buttons as
>> /devices/platform/thinkpad_acpi/input/input9
>> [ 3.022538] systemd-udevd (1407) used greatest stack depth: 12944 bytes
>> left
>> [ 3.046029] Intel(R) Wireless WiFi driver for Linux
>> [ 3.046032] Copyright(c) 2003- 2015 Intel Corporation
>> [ 3.049928] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
>> 0xffffffff81a84050)
>> [ 3.061421] iwlwifi 0000:03:00.0: loaded firmware version 17.265642.0
>> op_mode iwlmvm
>> [ 3.064140] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic:
>> line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>> [ 3.064145] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0
>> (0x0/0x0/0x0/0x0/0x0)
>> [ 3.064148] snd_hda_codec_generic hdaudioC1D0: hp_outs=1
>> (0x15/0x0/0x0/0x0/0x0)
>> [ 3.064150] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
>> [ 3.064151] snd_hda_codec_generic hdaudioC1D0: inputs:
>> [ 3.064154] snd_hda_codec_generic hdaudioC1D0: Mic=0x1a
>> [ 3.064156] snd_hda_codec_generic hdaudioC1D0: Internal Mic=0x12
>> [ 3.068860] input: HDA Intel PCH Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
>> [ 3.068965] snd_hda_intel 0000:00:03.0: Too many HDMI devices
>> [ 3.068969] snd_hda_intel 0000:00:03.0: Consider building the kernel with
>> CONFIG_SND_DYNAMIC_MINORS=y
>> [ 3.069120] input: HDA Intel PCH Headphone as
>> /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
>> [ 3.069343] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC
>> 7260, REV=0x144
>> [ 3.069833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>> [ 3.070499] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>> [ 3.071665] input: HDA Intel HDMI HDMI/DP,pcm=3 as
>> /devices/pci0000:00/0000:00:03.0/sound/card0/input12
>> [ 3.072275] input: HDA Intel HDMI HDMI/DP,pcm=7 as
>> /devices/pci0000:00/0000:00:03.0/sound/card0/input13
>> [ 3.072467] input: HDA Intel HDMI HDMI/DP as
>> /devices/pci0000:00/0000:00:03.0/sound/card0/input14
>> [ 3.091091] cdc_ncm 2-4:1.0: MAC-Address: ff:ff:ff:ff:ff:ff
>> [ 3.091096] cdc_ncm 2-4:1.0: setting rx_max = 16384
>> [ 3.091872] cdc_ncm 2-4:1.0 usb0: register 'cdc_ncm' at
>> usb-0000:00:14.0-4, CDC NCM, ff:ff:ff:ff:ff:ff
>> [ 3.091903] usbcore: registered new interface driver cdc_ncm
>> [ 3.277887] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>> [ 3.438586] EXT4-fs (sda3): re-mounted. Opts: (null)
>> [ 3.528197] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1
>> across:2097148k SS
>> [ 5.869460] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>> [ 5.870078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>> [ 6.062495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>> [ 6.063115] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>> [ 6.092691] ip (2349) used greatest stack depth: 12192 bytes left
>> [ 8.685944] random: nonblocking pool is initialized
>> [ 9.368752] wlan0: authenticate with e4:f4:c6:0a:bb:8b
>> [ 9.372797] wlan0: send auth to e4:f4:c6:0a:bb:8b (try 1/3)
>> [ 9.373419] wlan0: authenticated
>> [ 9.374132] wlan0: associate with e4:f4:c6:0a:bb:8b (try 1/3)
>> [ 9.375186] wlan0: RX AssocResp from e4:f4:c6:0a:bb:8b (capab=0x1011
>> status=0 aid=1)
>> [ 9.376508] wlan0: associated
>> [ 55.030187] usb 2-2: new high-speed USB device number 5 using xhci_hcd
>> [ 55.194925] usb 2-2: New USB device found, idVendor=2040, idProduct=0264
>> [ 55.194934] usb 2-2: New USB device strings: Mfr=3, Product=1,
>> SerialNumber=2
>> [ 55.194939] usb 2-2: Product: soloHD
>> [ 55.194942] usb 2-2: Manufacturer: HCW
>> [ 55.194945] usb 2-2: SerialNumber: 0011548565
>> [ 55.386950] em28xx: New device HCW soloHD @ 480 Mbps (2040:0264,
>> interface 0, class 0)
>> [ 55.386956] em28xx: DVB interface 0 found: isoc
>> [ 55.387013] em28xx: chip ID is em28178
>> [ 57.321297] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xcce4cb04
>> [ 57.321304] em28178 #0: EEPROM info:
>> [ 57.321307] em28178 #0: microcode start address = 0x0004, boot
>> configuration = 0x01
>> [ 57.328249] em28178 #0: AC97 audio (5 sample rates)
>> [ 57.328256] em28178 #0: 500mA max power
>> [ 57.328260] em28178 #0: Table at offset 0x27, strings=0x0e6a,
>> 0x1888, 0x087e
>> [ 57.328360] em28178 #0: Identified as PCTV tripleStick (292e) (card=94)
>> [ 57.328366] em28178 #0: dvb set to isoc mode.
>> [ 57.328423] usbcore: registered new interface driver em28xx
>> [ 57.335752] em28178 #0: Binding DVB extension
>> [ 57.338179] i2c i2c-11: Added multiplexed i2c bus 12
>> [ 57.338185] si2168 11-0064: Silicon Labs Si2168 successfully attached
>> [ 57.340481] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158
>> successfully attached
>> [ 57.340490] DVB: registering new adapter (em28178 #0)
>> [ 57.340494] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs
>> Si2168)...
>> [ 57.340896] em28178 #0: DVB extension successfully initialized
>> [ 57.340901] em28xx: Registered (Em28xx dvb Extension) extension
>> [ 57.343406] em28178 #0: Registering input extension
>> [ 57.343526] Registered IR keymap rc-pinnacle-pctv-hd
>> [ 57.343608] input: em28xx IR (em28178 #0) as
>> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0/input15
>> [ 57.343680] rc rc0: em28xx IR (em28178 #0) as
>> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0
>> [ 57.343787] em28178 #0: Input extension successfully initalized
>> [ 57.343789] em28xx: Registered (Em28xx Input Extension) extension
>> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
>> [ 101.428693] si2168 11-0064: downloading firmware from file
>> 'dvb-demod-si2168-b40-01.fw'
>> [ 101.657999] si2168 11-0064: firmware version: 4.0.11
>> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
>> [ 101.709738] si2157 12-0060: firmware version: 3.0.5
>>
>>
>> Another thing. At the end of w_scan i get:
>>
>> tune to: QAM_16 f = 778000 kHz I999B8C23D0T8G8Y0 (8468:12297:2305) (time:
>> 05:43.352)
>> service = 1-2-3.tv (MEDIA BROADCAST)
>> service = RTLNITRO (MEDIA BROADCAST)
>> service = TLC (MEDIA BROADCAST)
>> service = JuweloSK (MEDIA BROADCAST)
>> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
>> (8468:12352:16481) (time: 05:57.355)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
>> (8468:12352:16481) (time: 06:03.441) (no signal)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 (8468:12352:16497)
>> (time: 06:09.478)
>> updating transponder:
>> (QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
>> (8468:12352:16481)) 0x0000
>> to (QAM_AUTO f = 650000 kHz I999B8C0D0T32G16Y0P0 (8468:12352:16481))
>> 0x4004
>> service = ssu (Harmonic)
>> service = multithek dvb-t (Internet) (Media Broadcast)
>> tune to: QAM_64 f = 578000 kHz I999B8C23D0T8G4Y0 (8468:12348:15361) (time:
>> 06:25.355)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 578000 kHz I999B8C999D0T999G999Y0 (8468:12348:15361)
>> (time: 06:31.436) (no signal)
>> ----------no signal----------
>> tune to: QAM_16 f = 730000 kHz I999B8C34D0T8G4Y0 (8468:12361:18689) (time:
>> 06:37.533)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 730000 kHz I999B8C999D0T999G999Y0 (8468:12361:18689)
>> (time: 06:43.620) (no signal)
>> ----------no signal----------
>> tune to: QAM_16 f = 762000 kHz I999B8C23D0T8G4Y0 (8468:12368:20481) (time:
>> 06:49.706)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 762000 kHz I999B8C999D0T999G999Y0 (8468:12368:20481)
>> (time: 06:55.793) (no signal)
>> ----------no signal----------
>> retrying with center_frequency = 514000000
>> tune to: QAM_16 f = 514000 kHz I999B8C23D0T8G4Y0 (8468:12306:4609) (time:
>> 07:01.879)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 514000 kHz I999B8C999D0T999G999Y0 (8468:12306:4609)
>> (time: 07:07.964) (no signal)
>> ----------no signal----------
>> tune to: QAM_64 f = 474000 kHz I999B8C23D0T8G4Y0 (8468:12346:14849) (time:
>> 07:14.051)
>> ----------no signal----------
>> tune to: QAM_AUTO f = 474000 kHz I999B8C999D0T999G999Y0 (8468:12346:14849)
>> (time: 07:20.138) (no signal)
>> ----------no signal----------
>> (time: 07:26.222) dumping lists (57 services)
>>
>> Is that helping?
>>
>> thanks again.
>>
>> t.
>>
>>
>>
>> On 2016-06-18 18:56, Olli Salonen wrote:
>>>
>>> Hi Thomas,
>>>
>>> Please reboot your PC, run w_scan and then send the full output of
>>> dmesg command. Maybe the driver has printed something in the logs that
>>> can help us narrow the cause.
>>>
>>> Cheers,
>>> -olli
>>>
>>> On 18 June 2016 at 18:55, Thomas Stein <himbeere@meine-oma.de> wrote:
>>>>
>>>> Hello.
>>>>
>>>> I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw
>>>> there is general support already in the kernel.
>>>>
>>>> https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc
>>>>
>>>> I'm able to use this device for dvb-t but not dvb-t2. I'm living in
>>>> berlin
>>>> so it should work. w_scan is scanning dvb-t2 and seems
>>>> to find channels:
>>>>
>>>> Scanning DVB-T2...
>>>> Scanning 7MHz frequencies...
>>>> 177500: (time: 02:17.828)
>>>> 184500: (time: 02:19.828)
>>>> 191500: (time: 02:21.876)
>>>> 198500: (time: 02:23.924)
>>>> 205500: (time: 02:25.971)
>>>> 212500: (time: 02:27.971)
>>>> 219500: (time: 02:30.021)
>>>> 226500: (time: 02:32.071)
>>>> Scanning 8MHz frequencies...
>>>> 474000: (time: 02:34.120)
>>>> 482000: (time: 02:36.121)
>>>> 490000: (time: 02:38.169)
>>>> 498000: (time: 02:40.219)
>>>> 506000: skipped (already known transponder)
>>>> 514000: (time: 02:42.268)
>>>> 522000: skipped (already known transponder)
>>>> 530000: (time: 02:44.318)
>>>> 538000: (time: 02:46.368)
>>>> 546000: (time: 02:48.417)
>>>> 554000: (time: 02:50.417)
>>>> 562000: (time: 02:52.467)
>>>> 570000: skipped (already known transponder)
>>>> 578000: (time: 02:54.467)
>>>> 586000: (time: 02:56.469)
>>>> 594000: (time: 02:58.469)
>>>> 602000: (time: 03:00.518)
>>>> 610000: (time: 03:02.567)
>>>> 618000: skipped (already known transponder)
>>>> 626000: (time: 03:04.617)
>>>> 634000: (time: 03:06.617)
>>>> 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz
>>>> I999B8C999D999T999G999Y999P0 (0:0:0)
>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) :
>>>> updating transport_stream_id: -> (0:0:16481)
>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481)
>>>> :
>>>> updating network_id -> (0:12352:16481)
>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>>>> (0:12352:16481)
>>>> : updating original_network_id -> (8468:12352:16481)
>>>> updating transponder:
>>>> (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>>>> (8468:12352:16481)) 0x0000
>>>> to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
>>>> (8468:12352:16481)) 0x4004
>>>> new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1
>>>> (8468:12352:16497)) 0x4004
>>>> 650000: skipped (already known transponder)
>>>> 658000: skipped (already known transponder)
>>>> 666000: (time: 03:10.382)
>>>> 674000: (time: 03:12.429)
>>>> 682000: skipped (already known transponder)
>>>> 690000: (time: 03:14.476)
>>>> 698000: (time: 03:16.528)
>>>> 706000: skipped (already known transponder)
>>>> 714000: (time: 03:18.575)
>>>> 722000: (time: 03:20.623)
>>>> 730000: (time: 03:22.669)
>>>> 738000: (time: 03:24.716)
>>>> 746000: (time: 03:26.764)
>>>> 754000: skipped (already known transponder)
>>>> 762000: (time: 03:28.811)
>>>> 770000: (time: 03:30.860)
>>>> 778000: skipped (already known transponder)
>>>> 786000: (time: 03:32.908)
>>>> 794000: (time: 03:34.953)
>>>> 802000: (time: 03:36.999)
>>>> 810000: (time: 03:39.045)
>>>> 818000: (time: 03:41.045)
>>>> 826000: (time: 03:43.091)
>>>> 834000: (time: 03:45.137)
>>>> 842000: (time: 03:47.185)
>>>> 850000: (time: 03:49.231)
>>>> 858000: (time: 03:51.277)
>>>>
>>>> So the question is, what is going wrong? When i start vlc with dvb-t2
>>>> channels file for berlin i get:
>>>>
>>>> [00007f7e0c01a0e8] ts demux error: cannot peek
>>>>
>>>> Any hints appreciated.
>>>>
>>>> cheers
>>>> t.
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb usb stick Hauppauge WinTV-soloHD
2016-06-22 19:25 ` Olli Salonen
@ 2016-06-23 7:08 ` Thomas Stein
0 siblings, 0 replies; 6+ messages in thread
From: Thomas Stein @ 2016-06-23 7:08 UTC (permalink / raw)
To: Olli Salonen; +Cc: linux-media
Am 22.06.16 um 21:25 schrieb Olli Salonen:
> Hi Thomas,
Hi Olli.
> I made some more investigation and figured out that you have a DVB-T2
> mux at 642 MHz in Berlin, and can also see that your w_scan actually
> locks on that DVB-T2 mux as you wrote. Sorry, I did not read properly
> what you were saying in the beginning.
>
> Then it should be just a question of finding software that will work
> with your DVB-T2 channels as well. I've got no experience of VLC, but
> as far as I have understood it should support DVB-T2 as well. I've
> used dvbv5-zap and tvheadend with good success, but there are many
> others as well. Basically it is important the software implements the
> version 5 of the DVB API (DVBv5) instead of the older version 3.
Thanks for tipps. Tried them both yesterday. Right now i'm having trouble getting an initial
file for dvbv5-scan.
thanks again
t.
> Cheers,
> -olli
>
>
>
> On 22 June 2016 at 22:10, Olli Salonen <olli.salonen@iki.fi> wrote:
>> Hi Thomas,
>>
>> Ok, the correct firmwares are there:
>> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
>> [ 101.428693] si2168 11-0064: downloading firmware from file
>> 'dvb-demod-si2168-b40-01.fw'
>> [ 101.657999] si2168 11-0064: firmware version: 4.0.11
>> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
>> [ 101.709738] si2157 12-0060: firmware version: 3.0.5
>>
>> Basically everything looks good. Does this work on a Windows computer
>> using the same antenna cable and the same USB tuner?
>>
>> DVB-T2 support in w_scan has been evolving also, so make sure you've
>> got quite recent version.
>>
>> I've found that dvbv5-scan does the best job when scanning for
>> channels. However that needs initial scan table to start with. The
>> initial scan tables for Berlin don't seem to contain any DVB-T2 muxes
>> though: https://git.linuxtv.org/dtv-scan-tables.git/tree/dvb-t/de-Berlin
>> This means they're probably a bit out of date. If you know the DVB-T2
>> mux details, you can add them yourself and try dvbv5-scan.
>>
>> Cheers,
>> -olli
>>
>> On 18 June 2016 at 20:17, Thomas Stein <himbeere@meine-oma.de> wrote:
>>> Hi Olli.
>>>
>>> Thanks for your answer.
>>>
>>> Here we go.
>>>
>>> [ 0.000000] Linux version 4.6.2 (root@rather) (gcc version 5.3.0 (Gentoo
>>> 5.3.0 p1.0, pie-0.6.5) ) #3 SMP Sat Jun 18 13:34:40 CEST 2016
>>> [ 0.000000] Command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3 ro
>>> net.ifnames=0
>>> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
>>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
>>> registers'
>>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>>> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>>> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
>>> bytes, using 'standard' format.
>>> [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
>>> [ 0.000000] e820: BIOS-provided physical RAM map:
>>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
>>> [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce20ffff] usable
>>> [ 0.000000] BIOS-e820: [mem 0x00000000ce210000-0x00000000dcd3efff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI
>>> NVS
>>> [ 0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI
>>> data
>>> [ 0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000dfa0ffff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff]
>>> reserved
>>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
>>> [ 0.000000] NX (Execute Disable) protection: active
>>> [ 0.000000] SMBIOS 2.7 present.
>>> [ 0.000000] DMI: LENOVO 20A7005MGE/20A7005MGE, BIOS GRET46WW (1.23 )
>>> 11/04/2015
>>> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>>> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>>> [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
>>> [ 0.000000] MTRR default type: write-back
>>> [ 0.000000] MTRR fixed ranges enabled:
>>> [ 0.000000] 00000-9FFFF write-back
>>> [ 0.000000] A0000-BFFFF uncachable
>>> [ 0.000000] C0000-FFFFF write-protect
>>> [ 0.000000] MTRR variable ranges enabled:
>>> [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
>>> [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
>>> [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
>>> [ 0.000000] 3 base 00DCF00000 mask 7FFFF00000 uncachable
>>> [ 0.000000] 4 disabled
>>> [ 0.000000] 5 disabled
>>> [ 0.000000] 6 disabled
>>> [ 0.000000] 7 disabled
>>> [ 0.000000] 8 disabled
>>> [ 0.000000] 9 disabled
>>> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
>>> [ 0.000000] e820: last_pfn = 0xce210 max_arch_pfn = 0x400000000
>>> [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at
>>> [ffff8800000f0100]
>>> [ 0.000000] Scanning 1 areas for low memory corruption
>>> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>>> [ 0.000000] Using GB pages for direct mapping
>>> [ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE
>>> [ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE
>>> [ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE
>>> [ 0.000000] BRK [0x02104000, 0x02104fff] PGTABLE
>>> [ 0.000000] ACPI: Early table checksum verification disabled
>>> [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
>>> [ 0.000000] ACPI: XSDT 0x00000000DCEFE170 0000C4 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: DSDT 0x00000000DCEDF000 013476 (v01 LENOVO TP-GR
>>> 00001230 INTL 20120711)
>>> [ 0.000000] ACPI: FACS 0x00000000DCE6A000 000040
>>> [ 0.000000] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000001)
>>> [ 0.000000] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1
>>> 00000100 INTL 20120711)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2
>>> 00000200 INTL 20120711)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCEDE000 0009CB (v01 LENOVO SataAhci
>>> 00001000 INTL 20120711)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCEDD000 0007F5 (v01 LENOVO Cpu0Ist
>>> 00003000 INTL 20120711)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCEDC000 000AD8 (v01 LENOVO CpuPm
>>> 00003000 INTL 20120711)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCEDA000 00125C (v01 LENOVO SaSsdt
>>> 00003000 INTL 20120711)
>>> [ 0.000000] ACPI: UEFI 0x00000000DCED9000 000042 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: MSDM 0x00000000DCE44000 000055 (v03 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: BATB 0x00000000DCED8000 000046 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: FPDT 0x00000000DCED7000 000064 (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: UEFI 0x00000000DCED6000 0002CE (v01 LENOVO TP-GR
>>> 00001230 PTEC 00000002)
>>> [ 0.000000] ACPI: SSDT 0x00000000DCED5000 00047F (v01 LENOVO IsctTabl
>>> 00001000 INTL 20120711)
>>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>> [ 0.000000] Zone ranges:
>>> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
>>> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
>>> [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f5fffff]
>>> [ 0.000000] Movable zone start for each node
>>> [ 0.000000] Early memory node ranges
>>> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
>>> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce20ffff]
>>> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f5fffff]
>>> [ 0.000000] Initmem setup node 0 [mem
>>> 0x0000000000001000-0x000000021f5fffff]
>>> [ 0.000000] On node 0 totalpages: 2021292
>>> [ 0.000000] DMA zone: 64 pages used for memmap
>>> [ 0.000000] DMA zone: 21 pages reserved
>>> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
>>> [ 0.000000] DMA32 zone: 13129 pages used for memmap
>>> [ 0.000000] DMA32 zone: 840208 pages, LIFO batch:31
>>> [ 0.000000] Normal zone: 18392 pages used for memmap
>>> [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
>>> [ 0.000000] Reserving Intel graphics stolen memory at
>>> 0xdda00000-0xdf9fffff
>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
>>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
>>> 0-39
>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>> [ 0.000000] ACPI: IRQ0 used by override.
>>> [ 0.000000] ACPI: IRQ9 used by override.
>>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>>> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>>> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xce210000-0xdcd3efff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xdceff000-0xdfa0ffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa10000-0xf7ffffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
>>> [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>>> [ 0.000000] e820: [mem 0xdfa10000-0xf7ffffff] available for PCI devices
>>> [ 0.000000] Booting paravirtualized kernel on bare hardware
>>> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
>>> 0xffffffff, max_idle_ns: 1910969940391419 ns
>>> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
>>> nr_node_ids:1
>>> [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88021f200000 s91288 r8192
>>> d31592 u262144
>>> [ 0.000000] pcpu-alloc: s91288 r8192 d31592 u262144 alloc=1*2097152
>>> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
>>> pages: 1989686
>>> [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-4.6.2 root=/dev/sda3
>>> ro net.ifnames=0
>>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>>> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
>>> bytes)
>>> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
>>> bytes)
>>> [ 0.000000] Memory: 7861144K/8085168K available (8993K kernel code, 1099K
>>> rwdata, 2768K rodata, 1084K init, 844K bss, 224024K reserved, 0K
>>> cma-reserved)
>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>>> [ 0.000000] Hierarchical RCU implementation.
>>> [ 0.000000] Build-time adjustment of leaf fanout to 64.
>>> [ 0.000000] NR_IRQS:4352 nr_irqs:760 16
>>> [ 0.000000] Console: colour VGA+ 80x25
>>> [ 0.000000] console [tty0] enabled
>>> [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
>>> max_idle_ns: 133484882848 ns
>>> [ 0.000000] hpet clockevent registered
>>> [ 0.000000] tsc: Fast TSC calibration using PIT
>>> [ 0.000000] tsc: Detected 2294.638 MHz processor
>>> [ 0.000003] Calibrating delay loop (skipped), value calculated using
>>> timer frequency.. 4589.27 BogoMIPS (lpj=2294638)
>>> [ 0.000196] pid_max: default: 32768 minimum: 301
>>> [ 0.000292] ACPI: Core revision 20160108
>>> [ 0.021433] ACPI: 8 ACPI AML tables successfully acquired and loaded
>>>
>>> [ 0.021689] Security Framework initialized
>>> [ 0.021789] Mount-cache hash table entries: 16384 (order: 5, 131072
>>> bytes)
>>> [ 0.021890] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
>>> bytes)
>>> [ 0.022281] CPU: Physical Processor ID: 0
>>> [ 0.022373] CPU: Processor Core ID: 0
>>> [ 0.022467] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>>> [ 0.022564] ENERGY_PERF_BIAS: View and update with
>>> x86_energy_perf_policy(8)
>>> [ 0.022676] mce: CPU supports 7 MCE banks
>>> [ 0.022783] CPU0: Thermal monitoring enabled (TM1)
>>> [ 0.022887] process: using mwait in idle threads
>>> [ 0.022983] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>>> [ 0.023080] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>>> [ 0.023758] Freeing SMP alternatives memory: 36K (ffffffff82023000 -
>>> ffffffff8202c000)
>>> [ 0.032425] smpboot: Max logical packages: 4
>>> [ 0.032521] smpboot: APIC(0) Converting physical 0 to logical package
>>> 0
>>> [ 0.033235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> [ 0.043337] TSC deadline timer enabled
>>> [ 0.043341] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
>>> (family: 0x6, model: 0x45, stepping: 0x1)
>>> [ 0.043632] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events,
>>> full-width counters, Intel PMU driver.
>>> [ 0.044008] ... version: 3
>>> [ 0.044102] ... bit width: 48
>>> [ 0.044194] ... generic registers: 4
>>> [ 0.044287] ... value mask: 0000ffffffffffff
>>> [ 0.044384] ... max period: 0000ffffffffffff
>>> [ 0.044481] ... fixed-purpose events: 3
>>> [ 0.044573] ... event mask: 000000070000000f
>>> [ 0.045021] x86: Booting SMP configuration:
>>> [ 0.046155] .... node #0, CPUs: #1 #2 #3
>>> [ 0.232523] x86: Booted up 1 node, 4 CPUs
>>> [ 0.232705] smpboot: Total of 4 processors activated (18376.56 BogoMIPS)
>>> [ 0.238513] devtmpfs: initialized
>>> [ 0.238861] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff]
>>> (1310720 bytes)
>>> [ 0.239128] kworker/u16:0 (29) used greatest stack depth: 14280 bytes
>>> left
>>> [ 0.239130] clocksource: jiffies: mask: 0xffffffff max_cycles:
>>> 0xffffffff, max_idle_ns: 1911260446275000 ns
>>> [ 0.239257] RTC time: 19:01:15, date: 06/18/16
>>> [ 0.239394] NET: Registered protocol family 16
>>> [ 0.244260] cpuidle: using governor ladder
>>> [ 0.250272] cpuidle: using governor menu
>>> [ 0.250438] ACPI FADT declares the system doesn't support PCIe ASPM, so
>>> disable it
>>> [ 0.250584] ACPI: bus type PCI registered
>>> [ 0.250845] PCI: Using configuration type 1 for base access
>>> [ 0.250990] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>>> [ 0.254230] kworker/u16:2 (278) used greatest stack depth: 14184 bytes
>>> left
>>> [ 0.254429] kworker/u16:1 (290) used greatest stack depth: 14160 bytes
>>> left
>>> [ 0.259563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>>> [ 0.259852] ACPI: Added _OSI(Module Device)
>>> [ 0.259948] ACPI: Added _OSI(Processor Device)
>>> [ 0.260043] ACPI: Added _OSI(3.0 _SCP Extensions)
>>> [ 0.260139] ACPI: Added _OSI(Processor Aggregator Device)
>>> [ 0.260523] ACPI : EC: EC description table is found, configuring boot EC
>>> [ 0.260640] ACPI : EC: EC started
>>> [ 0.268034] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>>> [ 0.270402] ACPI: Dynamic OEM Table Load:
>>> [ 0.270590] ACPI: SSDT 0xFFFF880215F52800 000436 (v01 PmRef Cpu0Cst
>>> 00003001 INTL 20120711)
>>> [ 0.271758] ACPI: Dynamic OEM Table Load:
>>> [ 0.271943] ACPI: SSDT 0xFFFF880215F53000 0005AA (v01 PmRef ApIst
>>> 00003000 INTL 20120711)
>>> [ 0.273168] ACPI: Dynamic OEM Table Load:
>>> [ 0.273351] ACPI: SSDT 0xFFFF8800C9F61800 000119 (v01 PmRef ApCst
>>> 00003000 INTL 20120711)
>>> [ 0.275037] ACPI: Interpreter enabled
>>> [ 0.275160] ACPI: (supports S0 S3 S4 S5)
>>> [ 0.275255] ACPI: Using IOAPIC for interrupt routing
>>> [ 0.275385] PCI: Using host bridge windows from ACPI; if necessary, use
>>> "pci=nocrs" and report a bug
>>> [ 0.278879] ACPI: Power Resource [PUBS] (on)
>>> [ 0.284147] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>>> [ 0.284743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
>>> [ 0.285327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
>>> [ 0.285914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
>>> [ 0.286499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>>> [ 0.287066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0,
>>> disabled.
>>> [ 0.287777] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
>>> [ 0.288359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
>>> [ 0.288961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>>> [ 0.289067] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments
>>> MSI]
>>> [ 0.289241] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires
>>> [ExtendedConfig ASPM ClockPM MSI]
>>> [ 0.289450] PCI host bridge to bus 0000:00
>>> [ 0.289547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
>>> [ 0.289653] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
>>> [ 0.289756] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
>>> window]
>>> [ 0.289900] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff
>>> window]
>>> [ 0.290045] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff
>>> window]
>>> [ 0.290190] pci_bus 0000:00: root bus resource [bus 00-3f]
>>> [ 0.290295] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
>>> [ 0.290406] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
>>> [ 0.290423] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
>>> [ 0.290432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
>>> pref]
>>> [ 0.290438] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
>>> [ 0.290540] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
>>> [ 0.290551] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit]
>>> [ 0.290680] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
>>> [ 0.290699] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit]
>>> [ 0.290766] pci 0000:00:14.0: PME# supported from D3hot D3cold
>>> [ 0.290805] pci 0000:00:14.0: System wakeup disabled by ACPI
>>> [ 0.290951] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
>>> [ 0.290970] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053901f 64bit]
>>> [ 0.291039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>>> [ 0.291123] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
>>> [ 0.291139] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
>>> [ 0.291148] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
>>> [ 0.291157] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
>>> [ 0.291218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>> [ 0.291256] pci 0000:00:19.0: System wakeup disabled by ACPI
>>> [ 0.291402] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
>>> [ 0.291418] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit]
>>> [ 0.291488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>> [ 0.291568] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
>>> [ 0.291644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>> [ 0.291781] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
>>> [ 0.291858] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>>> [ 0.291936] pci 0000:00:1c.1: System wakeup disabled by ACPI
>>> [ 0.292088] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
>>> [ 0.292108] pci 0000:00:1d.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
>>> [ 0.292202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>>> [ 0.292242] pci 0000:00:1d.0: System wakeup disabled by ACPI
>>> [ 0.292387] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
>>> [ 0.292578] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
>>> [ 0.292593] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
>>> [ 0.292601] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
>>> [ 0.292609] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
>>> [ 0.292617] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
>>> [ 0.292625] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
>>> [ 0.292634] pci 0000:00:1f.2: reg 0x24: [mem 0xf053c000-0xf053c7ff]
>>> [ 0.292677] pci 0000:00:1f.2: PME# supported from D3hot
>>> [ 0.292752] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
>>> [ 0.292767] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit]
>>> [ 0.292789] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
>>> [ 0.292925] pci 0000:00:1c.0: PCI bridge to [bus 02]
>>> [ 0.293235] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
>>> [ 0.293319] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
>>> [ 0.293685] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>>> [ 0.295818] pci 0000:00:1c.1: PCI bridge to [bus 03]
>>> [ 0.295919] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
>>> [ 0.295938] pci_bus 0000:00: on NUMA node 0
>>> [ 0.296986] ACPI: Enabled 4 GPEs in block 00 to 7F
>>> [ 0.297271] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data =
>>> 0x62
>>> [ 0.297481] vgaarb: setting as boot device: PCI:0000:00:02.0
>>> [ 0.297582] vgaarb: device added:
>>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>>> [ 0.297734] vgaarb: loaded
>>> [ 0.297825] vgaarb: bridge control possible 0000:00:02.0
>>> [ 0.298025] SCSI subsystem initialized
>>> [ 0.298181] libata version 3.00 loaded.
>>> [ 0.298196] ACPI: bus type USB registered
>>> [ 0.298327] usbcore: registered new interface driver usbfs
>>> [ 0.298446] usbcore: registered new interface driver hub
>>> [ 0.298571] usbcore: registered new device driver usb
>>> [ 0.298708] Linux video capture interface: v2.00
>>> [ 0.298844] pps_core: LinuxPPS API ver. 1 registered
>>> [ 0.298942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
>>> Giometti <giometti@linux.it>
>>> [ 0.299097] PTP clock support registered
>>> [ 0.299269] Advanced Linux Sound Architecture Driver Initialized.
>>> [ 0.299386] PCI: Using ACPI for IRQ routing
>>> [ 0.299513] PCI: pci_cache_line_size set to 64 bytes
>>> [ 0.299823] Expanded resource reserved due to conflict with PCI Bus
>>> 0000:00
>>> [ 0.299925] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
>>> [ 0.299928] e820: reserve RAM buffer [mem 0xce210000-0xcfffffff]
>>> [ 0.299930] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
>>> [ 0.300102] Bluetooth: Core ver 2.21
>>> [ 0.300204] NET: Registered protocol family 31
>>> [ 0.300300] Bluetooth: HCI device and connection manager initialized
>>> [ 0.300401] Bluetooth: HCI socket layer initialized
>>> [ 0.300500] Bluetooth: L2CAP socket layer initialized
>>> [ 0.300601] Bluetooth: SCO socket layer initialized
>>> [ 0.300834] NetLabel: Initializing
>>> [ 0.300930] NetLabel: domain hash size = 128
>>> [ 0.301023] NetLabel: protocols = UNLABELED CIPSOv4
>>> [ 0.301135] NetLabel: unlabeled traffic allowed by default
>>> [ 0.301332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>>> [ 0.301794] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>>> [ 0.303929] clocksource: Switched to clocksource hpet
>>> [ 0.310841] VFS: Disk quotas dquot_6.6.0
>>> [ 0.310968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
>>> bytes)
>>> [ 0.311222] pnp: PnP ACPI init
>>> [ 0.311820] system 00:00: [mem 0x00000000-0x0009ffff] could not be
>>> reserved
>>> [ 0.311936] system 00:00: [mem 0x000c0000-0x000c3fff] could not be
>>> reserved
>>> [ 0.312037] system 00:00: [mem 0x000c4000-0x000c7fff] could not be
>>> reserved
>>> [ 0.312138] system 00:00: [mem 0x000c8000-0x000cbfff] could not be
>>> reserved
>>> [ 0.312239] system 00:00: [mem 0x000cc000-0x000cffff] could not be
>>> reserved
>>> [ 0.312340] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>>> [ 0.312441] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>>> [ 0.312541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>>> [ 0.312641] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>>> [ 0.312741] system 00:00: [mem 0x000e0000-0x000e3fff] could not be
>>> reserved
>>> [ 0.312842] system 00:00: [mem 0x000e4000-0x000e7fff] could not be
>>> reserved
>>> [ 0.312952] system 00:00: [mem 0x000e8000-0x000ebfff] could not be
>>> reserved
>>> [ 0.313053] system 00:00: [mem 0x000ec000-0x000effff] could not be
>>> reserved
>>> [ 0.313154] system 00:00: [mem 0x000f0000-0x000fffff] could not be
>>> reserved
>>> [ 0.313255] system 00:00: [mem 0x00100000-0xdf9fffff] could not be
>>> reserved
>>> [ 0.313356] system 00:00: [mem 0xfec00000-0xffffffff] could not be
>>> reserved
>>> [ 0.313461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>>> [ 0.313610] pnp 00:01: [Firmware Bug]: PNP resource [mem
>>> 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending
>>> to [mem 0xfed10000-0xfed17fff]
>>> [ 0.313842] system 00:01: [io 0x1800-0x189f] could not be reserved
>>> [ 0.313955] system 00:01: [io 0x0800-0x087f] has been reserved
>>> [ 0.314055] system 00:01: [io 0x0880-0x08ff] has been reserved
>>> [ 0.314154] system 00:01: [io 0x0900-0x097f] has been reserved
>>> [ 0.314253] system 00:01: [io 0x0980-0x09ff] has been reserved
>>> [ 0.314352] system 00:01: [io 0x0a00-0x0a7f] has been reserved
>>> [ 0.314450] system 00:01: [io 0x0a80-0x0aff] has been reserved
>>> [ 0.314549] system 00:01: [io 0x0b00-0x0b7f] has been reserved
>>> [ 0.314647] system 00:01: [io 0x0b80-0x0bff] has been reserved
>>> [ 0.314746] system 00:01: [io 0x15e0-0x15ef] has been reserved
>>> [ 0.314844] system 00:01: [io 0x1600-0x167f] has been reserved
>>> [ 0.314951] system 00:01: [io 0x1640-0x165f] has been reserved
>>> [ 0.315051] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>>> [ 0.315153] system 00:01: [mem 0x00000000-0x00000fff] could not be
>>> reserved
>>> [ 0.315254] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>>> [ 0.315354] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
>>> [ 0.315455] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>>> [ 0.315555] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>>> [ 0.315655] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>>> [ 0.315756] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>>> [ 0.315858] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>>> [ 0.315937] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>>> [ 0.315968] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303
>>> (active)
>>> [ 0.315995] pnp 00:04: Plug and Play ACPI device, IDs LEN0034 PNP0f13
>>> (active)
>>> [ 0.316527] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
>>> [ 0.316631] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>>> [ 0.316683] pnp: PnP ACPI: found 6 devices
>>> [ 0.323875] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
>>> max_idle_ns: 2085701024 ns
>>> [ 0.324057] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
>>> 02] add_size 1000
>>> [ 0.324061] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
>>> 64bit pref] to [bus 02] add_size 200000 add_align 100000
>>> [ 0.324064] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
>>> to [bus 02] add_size 200000 add_align 100000
>>> [ 0.324079] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff]
>>> res_to_dev_res add_size 200000 min_align 100000
>>> [ 0.324081] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x002fffff]
>>> res_to_dev_res add_size 200000 min_align 100000
>>> [ 0.324084] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
>>> pref] res_to_dev_res add_size 200000 min_align 100000
>>> [ 0.324086] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit
>>> pref] res_to_dev_res add_size 200000 min_align 100000
>>> [ 0.324088] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res
>>> add_size 1000 min_align 1000
>>> [ 0.324091] pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res
>>> add_size 1000 min_align 1000
>>> [ 0.324096] pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfb00000-0xdfcfffff]
>>> [ 0.324203] pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfd00000-0xdfefffff
>>> 64bit pref]
>>> [ 0.324351] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
>>> [ 0.324453] pci 0000:00:1c.0: PCI bridge to [bus 02]
>>> [ 0.324552] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
>>> [ 0.324654] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
>>> [ 0.324758] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff
>>> 64bit pref]
>>> [ 0.324908] pci 0000:00:1c.1: PCI bridge to [bus 03]
>>> [ 0.325017] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
>>> [ 0.325126] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
>>> [ 0.325128] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
>>> [ 0.325131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
>>> window]
>>> [ 0.325133] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff
>>> window]
>>> [ 0.325135] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff
>>> window]
>>> [ 0.325137] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
>>> [ 0.325139] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
>>> [ 0.325141] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit
>>> pref]
>>> [ 0.325143] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
>>> [ 0.325183] NET: Registered protocol family 2
>>> [ 0.325470] TCP established hash table entries: 65536 (order: 7, 524288
>>> bytes)
>>> [ 0.325725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>> [ 0.325988] TCP: Hash tables configured (established 65536 bind 65536)
>>> [ 0.326114] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>>> [ 0.326238] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>>> [ 0.326419] NET: Registered protocol family 1
>>> [ 0.326594] RPC: Registered named UNIX socket transport module.
>>> [ 0.326696] RPC: Registered udp transport module.
>>> [ 0.326790] RPC: Registered tcp transport module.
>>> [ 0.326885] RPC: Registered tcp NFSv4.1 backchannel transport module.
>>> [ 0.327064] pci 0000:00:02.0: Video device with shadowed ROM at [mem
>>> 0x000c0000-0x000dffff]
>>> [ 0.327700] PCI: CLS 64 bytes, default 64
>>> [ 0.327729] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>> [ 0.327832] software IO TLB [mem 0xca210000-0xce210000] (64MB) mapped at
>>> [ffff8800ca210000-ffff8800ce20ffff]
>>> [ 0.328082] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360
>>> ms ovfl timer
>>> [ 0.329310] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>>> [ 0.329408] RAPL PMU: hw unit of domain package 2^-14 Joules
>>> [ 0.329504] RAPL PMU: hw unit of domain dram 2^-14 Joules
>>> [ 0.329601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>>> [ 0.330119] Scanning for low memory corruption every 60 seconds
>>> [ 0.330598] futex hash table entries: 2048 (order: 5, 131072 bytes)
>>> [ 0.330737] audit: initializing netlink subsys (disabled)
>>> [ 0.330844] audit: type=2000 audit(1466276474.314:1): initialized
>>> [ 0.331567] workingset: timestamp_bits=60 max_order=21 bucket_order=0
>>> [ 0.335140] NFS: Registering the id_resolver key type
>>> [ 0.335246] Key type id_resolver registered
>>> [ 0.335342] Key type id_legacy registered
>>> [ 0.335501] fuse init (API version 7.24)
>>> [ 0.336731] Block layer SCSI generic (bsg) driver version 0.4 loaded
>>> (major 251)
>>> [ 0.336885] io scheduler noop registered
>>> [ 0.337038] io scheduler deadline registered
>>> [ 0.337177] io scheduler cfq registered (default)
>>> [ 0.337649] intel_idle: MWAIT substates: 0x11142120
>>> [ 0.337652] intel_idle: v0.4.1 model 0x45
>>> [ 0.337924] intel_idle: lapic_timer_reliable_states 0xffffffff
>>> [ 0.338106] ACPI: AC Adapter [AC] (on-line)
>>> [ 0.338281] input: Lid Switch as
>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>>> [ 0.338560] ACPI: Lid Switch [LID]
>>> [ 0.338697] input: Sleep Button as
>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>>> [ 0.338852] ACPI: Sleep Button [SLPB]
>>> [ 0.339076] input: Power Button as
>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>>> [ 0.339229] ACPI: Power Button [PWRF]
>>> [ 0.340623] thermal LNXTHERM:00: registered as thermal_zone0
>>> [ 0.340724] ACPI: Thermal Zone [THM0] (45 C)
>>> [ 0.340893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>>> [ 0.341643] Non-volatile memory driver v1.3
>>> [ 0.341812] Linux agpgart interface v0.103
>>> [ 0.341990] [drm] Initialized drm 1.1.0 20060810
>>> [ 0.342731] [drm] Memory usable by graphics device = 2048M
>>> [ 0.342883] [drm] Replacing VGA console driver
>>> [ 0.344095] Console: switching to colour dummy device 80x25
>>> [ 0.349322] ACPI: Battery Slot [BAT0] (battery present)
>>> [ 0.350072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>>> [ 0.350078] [drm] Driver supports precise vblank timestamp query.
>>> [ 0.350404] vgaarb: device changed decodes:
>>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>>> [ 0.389347] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
>>> [ 0.389938] input: Video Bus as
>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>>> [ 0.389997] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on
>>> minor 0
>>> [ 0.391982] loop: module loaded
>>> [ 0.392110] ahci 0000:00:1f.2: version 3.0
>>> [ 0.402379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1
>>> impl SATA mode
>>> [ 0.402393] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum
>>> part deso sadm sds apst
>>> [ 0.402925] scsi host0: ahci
>>> [ 0.403073] scsi host1: ahci
>>> [ 0.403179] scsi host2: ahci
>>> [ 0.403233] ata1: SATA max UDMA/133 abar m2048@0xf053c000 port 0xf053c100
>>> irq 41
>>> [ 0.403240] ata2: DUMMY
>>> [ 0.403244] ata3: DUMMY
>>> [ 0.403383] e1000: Intel(R) PRO/1000 Network Driver - version
>>> 7.3.21-k8-NAPI
>>> [ 0.403389] e1000: Copyright (c) 1999-2006 Intel Corporation.
>>> [ 0.403412] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>>> [ 0.403417] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>>> [ 0.403584] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set
>>> to dynamic conservative mode
>>> [ 0.566997] fbcon: inteldrmfb (fb0) is primary device
>>> [ 0.706983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>>> [ 0.719971] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
>>> succeeded
>>> [ 0.719974] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
>>> filtered out
>>> [ 0.722129] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
>>> succeeded
>>> [ 0.727893] ata1.00: supports DRM functions and may not be fully
>>> accessible
>>> [ 0.730026] ata1.00: ATA-9: INTEL SSDSCKGF180A4L, LSTi, max UDMA/133
>>> [ 0.730029] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth
>>> 31/32), AA
>>> [ 0.750022] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES)
>>> succeeded
>>> [ 0.750024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
>>> filtered out
>>> [ 0.752120] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES)
>>> succeeded
>>> [ 0.757897] ata1.00: supports DRM functions and may not be fully
>>> accessible
>>> [ 0.767970] ata1.00: configured for UDMA/133
>>> [ 0.826761] e1000e 0000:00:19.0 eth0: registered PHC clock
>>> [ 0.826763] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
>>> 54:ee:75:07:92:a9
>>> [ 0.826764] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>>> Connection
>>> [ 0.826801] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
>>> 1000FF-0FF
>>> [ 0.826834] igb: Intel(R) Gigabit Ethernet Network Driver - version
>>> 5.3.0-k
>>> [ 0.826834] igb: Copyright (c) 2007-2014 Intel Corporation.
>>> [ 0.826858] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
>>> version 2.0.2-k
>>> [ 0.826858] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
>>> [ 0.826973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>>> [ 0.826976] ehci-pci: EHCI PCI platform driver
>>> [ 0.827128] ehci-pci 0000:00:1d.0: EHCI Host Controller
>>> [ 0.827182] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
>>> number 1
>>> [ 0.827195] ehci-pci 0000:00:1d.0: debug port 2
>>> [ 0.831108] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>>> [ 0.831122] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053d000
>>> [ 0.837021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>>> [ 0.837071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>>> [ 0.837072] usb usb1: New USB device strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> [ 0.837074] usb usb1: Product: EHCI Host Controller
>>> [ 0.837075] usb usb1: Manufacturer: Linux 4.6.2 ehci_hcd
>>> [ 0.837076] usb usb1: SerialNumber: 0000:00:1d.0
>>> [ 0.837271] hub 1-0:1.0: USB hub found
>>> [ 0.837279] hub 1-0:1.0: 3 ports detected
>>> [ 0.837469] ehci-platform: EHCI generic platform driver
>>> [ 0.837496] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>>> [ 0.837512] ohci-pci: OHCI PCI platform driver
>>> [ 0.837537] uhci_hcd: USB Universal Host Controller Interface driver
>>> [ 0.837680] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>> [ 0.837736] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
>>> number 2
>>> [ 0.838822] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
>>> 0x100 quirks 0x0004b810
>>> [ 0.838827] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>>> [ 0.838910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>>> [ 0.838911] usb usb2: New USB device strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> [ 0.838912] usb usb2: Product: xHCI Host Controller
>>> [ 0.838913] usb usb2: Manufacturer: Linux 4.6.2 xhci-hcd
>>> [ 0.838914] usb usb2: SerialNumber: 0000:00:14.0
>>> [ 0.839063] hub 2-0:1.0: USB hub found
>>> [ 0.839077] hub 2-0:1.0: 9 ports detected
>>> [ 0.841021] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>> [ 0.841068] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
>>> number 3
>>> [ 0.841107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>>> [ 0.841108] usb usb3: New USB device strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> [ 0.841110] usb usb3: Product: xHCI Host Controller
>>> [ 0.841111] usb usb3: Manufacturer: Linux 4.6.2 xhci-hcd
>>> [ 0.841112] usb usb3: SerialNumber: 0000:00:14.0
>>> [ 0.841243] hub 3-0:1.0: USB hub found
>>> [ 0.841254] hub 3-0:1.0: 4 ports detected
>>> [ 0.842267] usbcore: registered new interface driver usblp
>>> [ 0.842305] usbcore: registered new interface driver usb-storage
>>> [ 0.842355] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
>>> 0x60,0x64 irq 1,12
>>> [ 0.844196] serio: i8042 KBD port at 0x60,0x64 irq 1
>>> [ 0.844200] serio: i8042 AUX port at 0x60,0x64 irq 12
>>> [ 0.844360] mousedev: PS/2 mouse device common for all mice
>>> [ 0.844656] rtc_cmos 00:02: RTC can wake from S4
>>> [ 0.844821] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>>> [ 0.844848] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram,
>>> hpet irqs
>>> [ 0.845003] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>>> [ 0.845876] input: AT Translated Set 2 keyboard as
>>> /devices/platform/i8042/serio0/input/input4
>>> [ 0.846822] IR NEC protocol handler initialized
>>> [ 0.846826] IR RC5(x/sz) protocol handler initialized
>>> [ 0.846829] IR RC6 protocol handler initialized
>>> [ 0.846833] IR JVC protocol handler initialized
>>> [ 0.846836] IR Sony protocol handler initialized
>>> [ 0.846840] IR SANYO protocol handler initialized
>>> [ 0.846843] IR Sharp protocol handler initialized
>>> [ 0.846847] IR MCE Keyboard/mouse protocol handler initialized
>>> [ 0.846850] IR XMP protocol handler initialized
>>> [ 0.846875] usbcore: registered new interface driver uvcvideo
>>> [ 0.846876] USB Video Class driver (1.1.1)
>>> [ 0.847024] Bluetooth: HCI UART driver ver 2.3
>>> [ 0.847026] Bluetooth: HCI UART protocol H4 registered
>>> [ 0.847026] Bluetooth: HCI UART protocol BCSP registered
>>> [ 0.847027] Bluetooth: HCI UART protocol LL registered
>>> [ 0.847028] Bluetooth: HCI UART protocol ATH3K registered
>>> [ 0.847028] Bluetooth: HCI UART protocol Three-wire (H5) registered
>>> [ 0.847048] usbcore: registered new interface driver btusb
>>> [ 0.847088] hidraw: raw HID events driver (C) Jiri Kosina
>>> [ 0.847332] usbcore: registered new interface driver usbhid
>>> [ 0.847333] usbhid: USB HID core driver
>>> [ 0.847613] Netfilter messages via NETLINK v0.30.
>>> [ 0.847630] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>>> [ 0.847986] Initializing XFRM netlink socket
>>> [ 0.847994] NET: Registered protocol family 17
>>> [ 0.848034] Bluetooth: RFCOMM TTY layer initialized
>>> [ 0.848037] Bluetooth: RFCOMM socket layer initialized
>>> [ 0.848041] Bluetooth: RFCOMM ver 1.11
>>> [ 0.848048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>>> [ 0.848052] Bluetooth: HIDP socket layer initialized
>>> [ 0.848083] Key type dns_resolver registered
>>> [ 0.848373] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
>>> [ 0.848382] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
>>> [ 0.848394] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
>>> [ 0.848404] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
>>> [ 0.848441] microcode: Microcode Update Driver: v2.01
>>> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>>> [ 0.848652] registered taskstats version 1
>>> [ 0.849234] Magic number: 4:330:41
>>> [ 0.849250] bdi 7:6: hash matches
>>> [ 1.139039] usb 1-1: new high-speed USB device number 2 using ehci-pci
>>> [ 1.194038] usb 2-4: new high-speed USB device number 2 using xhci_hcd
>>> [ 1.253766] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
>>> [ 1.253768] usb 1-1: New USB device strings: Mfr=0, Product=0,
>>> SerialNumber=0
>>> [ 1.254036] hub 1-1:1.0: USB hub found
>>> [ 1.254260] hub 1-1:1.0: 8 ports detected
>>> [ 1.329990] psmouse serio1: synaptics: queried max coordinates: x
>>> [..5112], y [..3834]
>>> [ 1.330000] tsc: Refined TSC clocksource calibration: 2294.686 MHz
>>> [ 1.330002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
>>> 0x211399552f8, max_idle_ns: 440795292447 ns
>>> [ 1.363006] psmouse serio1: synaptics: queried min coordinates: x
>>> [1024..], y [1024..]
>>> [ 1.363011] psmouse serio1: synaptics: quirked min/max coordinates: x
>>> [1024..5112], y [2024..4832]
>>> [ 1.365412] usb 2-4: New USB device found, idVendor=1199, idProduct=a001
>>> [ 1.365414] usb 2-4: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=3
>>> [ 1.365415] usb 2-4: Product: Sierra Wireless EM7345 4G LTE
>>> [ 1.365417] usb 2-4: Manufacturer: Sierra Wireless Inc.
>>> [ 1.365418] usb 2-4: SerialNumber: 013937000496677
>>> [ 1.425952] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id:
>>> 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id:
>>> 1545510
>>> [ 1.425980] psmouse serio1: synaptics: serio: Synaptics pass-through port
>>> at isa0060/serio1/input0
>>> [ 1.467198] input: SynPS/2 Synaptics TouchPad as
>>> /devices/platform/i8042/serio1/input/input6
>>> [ 1.530046] usb 1-1.8: new high-speed USB device number 3 using ehci-pci
>>> [ 1.530963] usb 2-6: new full-speed USB device number 3 using xhci_hcd
>>> [ 1.640531] usb 1-1.8: New USB device found, idVendor=04f2,
>>> idProduct=b3f5
>>> [ 1.640534] usb 1-1.8: New USB device strings: Mfr=3, Product=1,
>>> SerialNumber=2
>>> [ 1.640535] usb 1-1.8: Product: Integrated Camera
>>> [ 1.640536] usb 1-1.8: Manufacturer: Chicony Electronics Co.,Ltd.
>>> [ 1.640537] usb 1-1.8: SerialNumber: 0x0001
>>> [ 1.642187] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b3f5)
>>> [ 1.643866] input: Integrated Camera as
>>> /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input8
>>> [ 1.697658] usb 2-6: New USB device found, idVendor=138a, idProduct=0017
>>> [ 1.697660] usb 2-6: New USB device strings: Mfr=0, Product=0,
>>> SerialNumber=1
>>> [ 1.697661] usb 2-6: SerialNumber: 78916408f2b4
>>> [ 1.851001] usb 2-7: new full-speed USB device number 4 using xhci_hcd
>>> [ 2.002995] Console: switching to colour frame buffer device 320x90
>>> [ 2.016156] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
>>> [ 2.016159] usb 2-7: New USB device strings: Mfr=0, Product=0,
>>> SerialNumber=0
>>> [ 2.029636] Bluetooth: hci0: read Intel version: 370710018002030d00
>>> [ 2.029651] bluetooth hci0: Direct firmware load for
>>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq failed with error -2
>>> [ 2.029653] Bluetooth: hci0 failed to open Intel firmware file:
>>> intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2)
>>> [ 2.029661] bluetooth hci0: Direct firmware load for
>>> intel/ibt-hw-37.7.bseq failed with error -2
>>> [ 2.029662] Bluetooth: hci0 failed to open default Intel fw file:
>>> intel/ibt-hw-37.7.bseq
>>> [ 2.117813] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
>>> buttons: 3/3
>>> [ 2.162388] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>>> [ 2.164476] console [netcon0] enabled
>>> [ 2.166461] netconsole: network logging started
>>> [ 2.169571] PM: Hibernation image not present or could not be loaded.
>>> [ 2.169576] ALSA device list:
>>> [ 2.171571] No soundcards found.
>>> [ 2.175327] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSCKGF18
>>> LSTi PQ: 0 ANSI: 5
>>> [ 2.190402] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180
>>> GB/168 GiB)
>>> [ 2.190411] sd 0:0:0:0: Attached scsi generic sg0 type 0
>>> [ 2.196003] sd 0:0:0:0: [sda] 4096-byte physical blocks
>>> [ 2.199406] sd 0:0:0:0: [sda] Write Protect is off
>>> [ 2.202721] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> [ 2.202761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
>>> doesn't support DPO or FUA
>>> [ 2.208859] sda: sda1 sda2 sda3
>>> [ 2.210887] sd 0:0:0:0: [sda] Attached SCSI disk
>>> [ 2.330247] clocksource: Switched to clocksource tsc
>>> [ 2.334213] input: TPPS/2 IBM TrackPoint as
>>> /devices/platform/i8042/serio1/serio2/input/input7
>>> [ 2.416442] EXT4-fs (sda3): couldn't mount as ext3 due to feature
>>> incompatibilities
>>> [ 2.425152] EXT4-fs (sda3): mounted filesystem with ordered data mode.
>>> Opts: (null)
>>> [ 2.426963] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
>>> [ 2.428912] devtmpfs: mounted
>>> [ 2.431403] Freeing unused kernel memory: 1084K (ffffffff81f14000 -
>>> ffffffff82023000)
>>> [ 2.432636] Write protecting the kernel read-only data: 14336k
>>> [ 2.434250] Freeing unused kernel memory: 1228K (ffff8800018cd000 -
>>> ffff880001a00000)
>>> [ 2.438522] Freeing unused kernel memory: 1328K (ffff880001cb4000 -
>>> ffff880001e00000)
>>> [ 2.493209] setfont (1160) used greatest stack depth: 13656 bytes left
>>> [ 2.522615] init-early.sh (1159) used greatest stack depth: 13048 bytes
>>> left
>>> [ 2.903608] systemd-udevd[1373]: starting version 218
>>> [ 2.907958] systemd-udevd[1373]: Network interface NamePolicy= disabled
>>> on kernel command line, ignoring.
>>> [ 2.908114] random: systemd-udevd urandom read with 38 bits of entropy
>>> available
>>> [ 3.016335] thinkpad_acpi: ThinkPad ACPI Extras v0.25
>>> [ 3.016339] thinkpad_acpi: http://ibm-acpi.sf.net/
>>> [ 3.016341] thinkpad_acpi: ThinkPad BIOS GRET46WW (1.23 ), EC unknown
>>> [ 3.016342] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 2nd, model
>>> 20A7005MGE
>>> [ 3.017094] thinkpad_acpi: unknown version of the HKEY interface: 0x200
>>> [ 3.017097] thinkpad_acpi: please report this to
>>> ibm-acpi-devel@lists.sourceforge.net
>>> [ 3.017105] thinkpad_acpi: radio switch found; radios are enabled
>>> [ 3.017121] thinkpad_acpi: This ThinkPad has standard ACPI backlight
>>> brightness control, supported by the ACPI video driver
>>> [ 3.017122] thinkpad_acpi: Disabling thinkpad-acpi brightness events by
>>> default...
>>> [ 3.018688] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
>>> unblocked
>>> [ 3.019369] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is
>>> unblocked
>>> [ 3.019849] systemd-udevd[1374]: Network interface NamePolicy= disabled
>>> on kernel command line, ignoring.
>>> [ 3.020801] thinkpad_acpi: warning: userspace override of important
>>> firmware LEDs is enabled
>>> [ 3.022038] input: ThinkPad Extra Buttons as
>>> /devices/platform/thinkpad_acpi/input/input9
>>> [ 3.022538] systemd-udevd (1407) used greatest stack depth: 12944 bytes
>>> left
>>> [ 3.046029] Intel(R) Wireless WiFi driver for Linux
>>> [ 3.046032] Copyright(c) 2003- 2015 Intel Corporation
>>> [ 3.049928] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
>>> 0xffffffff81a84050)
>>> [ 3.061421] iwlwifi 0000:03:00.0: loaded firmware version 17.265642.0
>>> op_mode iwlmvm
>>> [ 3.064140] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic:
>>> line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>>> [ 3.064145] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0
>>> (0x0/0x0/0x0/0x0/0x0)
>>> [ 3.064148] snd_hda_codec_generic hdaudioC1D0: hp_outs=1
>>> (0x15/0x0/0x0/0x0/0x0)
>>> [ 3.064150] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
>>> [ 3.064151] snd_hda_codec_generic hdaudioC1D0: inputs:
>>> [ 3.064154] snd_hda_codec_generic hdaudioC1D0: Mic=0x1a
>>> [ 3.064156] snd_hda_codec_generic hdaudioC1D0: Internal Mic=0x12
>>> [ 3.068860] input: HDA Intel PCH Mic as
>>> /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
>>> [ 3.068965] snd_hda_intel 0000:00:03.0: Too many HDMI devices
>>> [ 3.068969] snd_hda_intel 0000:00:03.0: Consider building the kernel with
>>> CONFIG_SND_DYNAMIC_MINORS=y
>>> [ 3.069120] input: HDA Intel PCH Headphone as
>>> /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
>>> [ 3.069343] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC
>>> 7260, REV=0x144
>>> [ 3.069833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>>> [ 3.070499] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>>> [ 3.071665] input: HDA Intel HDMI HDMI/DP,pcm=3 as
>>> /devices/pci0000:00/0000:00:03.0/sound/card0/input12
>>> [ 3.072275] input: HDA Intel HDMI HDMI/DP,pcm=7 as
>>> /devices/pci0000:00/0000:00:03.0/sound/card0/input13
>>> [ 3.072467] input: HDA Intel HDMI HDMI/DP as
>>> /devices/pci0000:00/0000:00:03.0/sound/card0/input14
>>> [ 3.091091] cdc_ncm 2-4:1.0: MAC-Address: ff:ff:ff:ff:ff:ff
>>> [ 3.091096] cdc_ncm 2-4:1.0: setting rx_max = 16384
>>> [ 3.091872] cdc_ncm 2-4:1.0 usb0: register 'cdc_ncm' at
>>> usb-0000:00:14.0-4, CDC NCM, ff:ff:ff:ff:ff:ff
>>> [ 3.091903] usbcore: registered new interface driver cdc_ncm
>>> [ 3.277887] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>>> [ 3.438586] EXT4-fs (sda3): re-mounted. Opts: (null)
>>> [ 3.528197] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1
>>> across:2097148k SS
>>> [ 5.869460] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>>> [ 5.870078] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>>> [ 6.062495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>>> [ 6.063115] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>>> [ 6.092691] ip (2349) used greatest stack depth: 12192 bytes left
>>> [ 8.685944] random: nonblocking pool is initialized
>>> [ 9.368752] wlan0: authenticate with e4:f4:c6:0a:bb:8b
>>> [ 9.372797] wlan0: send auth to e4:f4:c6:0a:bb:8b (try 1/3)
>>> [ 9.373419] wlan0: authenticated
>>> [ 9.374132] wlan0: associate with e4:f4:c6:0a:bb:8b (try 1/3)
>>> [ 9.375186] wlan0: RX AssocResp from e4:f4:c6:0a:bb:8b (capab=0x1011
>>> status=0 aid=1)
>>> [ 9.376508] wlan0: associated
>>> [ 55.030187] usb 2-2: new high-speed USB device number 5 using xhci_hcd
>>> [ 55.194925] usb 2-2: New USB device found, idVendor=2040, idProduct=0264
>>> [ 55.194934] usb 2-2: New USB device strings: Mfr=3, Product=1,
>>> SerialNumber=2
>>> [ 55.194939] usb 2-2: Product: soloHD
>>> [ 55.194942] usb 2-2: Manufacturer: HCW
>>> [ 55.194945] usb 2-2: SerialNumber: 0011548565
>>> [ 55.386950] em28xx: New device HCW soloHD @ 480 Mbps (2040:0264,
>>> interface 0, class 0)
>>> [ 55.386956] em28xx: DVB interface 0 found: isoc
>>> [ 55.387013] em28xx: chip ID is em28178
>>> [ 57.321297] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xcce4cb04
>>> [ 57.321304] em28178 #0: EEPROM info:
>>> [ 57.321307] em28178 #0: microcode start address = 0x0004, boot
>>> configuration = 0x01
>>> [ 57.328249] em28178 #0: AC97 audio (5 sample rates)
>>> [ 57.328256] em28178 #0: 500mA max power
>>> [ 57.328260] em28178 #0: Table at offset 0x27, strings=0x0e6a,
>>> 0x1888, 0x087e
>>> [ 57.328360] em28178 #0: Identified as PCTV tripleStick (292e) (card=94)
>>> [ 57.328366] em28178 #0: dvb set to isoc mode.
>>> [ 57.328423] usbcore: registered new interface driver em28xx
>>> [ 57.335752] em28178 #0: Binding DVB extension
>>> [ 57.338179] i2c i2c-11: Added multiplexed i2c bus 12
>>> [ 57.338185] si2168 11-0064: Silicon Labs Si2168 successfully attached
>>> [ 57.340481] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158
>>> successfully attached
>>> [ 57.340490] DVB: registering new adapter (em28178 #0)
>>> [ 57.340494] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs
>>> Si2168)...
>>> [ 57.340896] em28178 #0: DVB extension successfully initialized
>>> [ 57.340901] em28xx: Registered (Em28xx dvb Extension) extension
>>> [ 57.343406] em28178 #0: Registering input extension
>>> [ 57.343526] Registered IR keymap rc-pinnacle-pctv-hd
>>> [ 57.343608] input: em28xx IR (em28178 #0) as
>>> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0/input15
>>> [ 57.343680] rc rc0: em28xx IR (em28178 #0) as
>>> /devices/pci0000:00/0000:00:14.0/usb2/2-2/rc/rc0
>>> [ 57.343787] em28178 #0: Input extension successfully initalized
>>> [ 57.343789] em28xx: Registered (Em28xx Input Extension) extension
>>> [ 101.423697] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
>>> [ 101.428693] si2168 11-0064: downloading firmware from file
>>> 'dvb-demod-si2168-b40-01.fw'
>>> [ 101.657999] si2168 11-0064: firmware version: 4.0.11
>>> [ 101.661225] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
>>> [ 101.709738] si2157 12-0060: firmware version: 3.0.5
>>>
>>>
>>> Another thing. At the end of w_scan i get:
>>>
>>> tune to: QAM_16 f = 778000 kHz I999B8C23D0T8G8Y0 (8468:12297:2305) (time:
>>> 05:43.352)
>>> service = 1-2-3.tv (MEDIA BROADCAST)
>>> service = RTLNITRO (MEDIA BROADCAST)
>>> service = TLC (MEDIA BROADCAST)
>>> service = JuweloSK (MEDIA BROADCAST)
>>> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
>>> (8468:12352:16481) (time: 05:57.355)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
>>> (8468:12352:16481) (time: 06:03.441) (no signal)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1 (8468:12352:16497)
>>> (time: 06:09.478)
>>> updating transponder:
>>> (QAM_AUTO f = 650000 kHz I999B8C999D999T999G999Y999P0
>>> (8468:12352:16481)) 0x0000
>>> to (QAM_AUTO f = 650000 kHz I999B8C0D0T32G16Y0P0 (8468:12352:16481))
>>> 0x4004
>>> service = ssu (Harmonic)
>>> service = multithek dvb-t (Internet) (Media Broadcast)
>>> tune to: QAM_64 f = 578000 kHz I999B8C23D0T8G4Y0 (8468:12348:15361) (time:
>>> 06:25.355)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 578000 kHz I999B8C999D0T999G999Y0 (8468:12348:15361)
>>> (time: 06:31.436) (no signal)
>>> ----------no signal----------
>>> tune to: QAM_16 f = 730000 kHz I999B8C34D0T8G4Y0 (8468:12361:18689) (time:
>>> 06:37.533)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 730000 kHz I999B8C999D0T999G999Y0 (8468:12361:18689)
>>> (time: 06:43.620) (no signal)
>>> ----------no signal----------
>>> tune to: QAM_16 f = 762000 kHz I999B8C23D0T8G4Y0 (8468:12368:20481) (time:
>>> 06:49.706)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 762000 kHz I999B8C999D0T999G999Y0 (8468:12368:20481)
>>> (time: 06:55.793) (no signal)
>>> ----------no signal----------
>>> retrying with center_frequency = 514000000
>>> tune to: QAM_16 f = 514000 kHz I999B8C23D0T8G4Y0 (8468:12306:4609) (time:
>>> 07:01.879)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 514000 kHz I999B8C999D0T999G999Y0 (8468:12306:4609)
>>> (time: 07:07.964) (no signal)
>>> ----------no signal----------
>>> tune to: QAM_64 f = 474000 kHz I999B8C23D0T8G4Y0 (8468:12346:14849) (time:
>>> 07:14.051)
>>> ----------no signal----------
>>> tune to: QAM_AUTO f = 474000 kHz I999B8C999D0T999G999Y0 (8468:12346:14849)
>>> (time: 07:20.138) (no signal)
>>> ----------no signal----------
>>> (time: 07:26.222) dumping lists (57 services)
>>>
>>> Is that helping?
>>>
>>> thanks again.
>>>
>>> t.
>>>
>>>
>>>
>>> On 2016-06-18 18:56, Olli Salonen wrote:
>>>>
>>>> Hi Thomas,
>>>>
>>>> Please reboot your PC, run w_scan and then send the full output of
>>>> dmesg command. Maybe the driver has printed something in the logs that
>>>> can help us narrow the cause.
>>>>
>>>> Cheers,
>>>> -olli
>>>>
>>>> On 18 June 2016 at 18:55, Thomas Stein <himbeere@meine-oma.de> wrote:
>>>>>
>>>>> Hello.
>>>>>
>>>>> I'm trying to get a dvb usb stick Hauppauge WinTV-soloHD running. I saw
>>>>> there is general support already in the kernel.
>>>>>
>>>>> https://git.linuxtv.org/media_tree.git/commit/?id=1efc21701d94ed0c5b91467b042bed8b8becd5cc
>>>>>
>>>>> I'm able to use this device for dvb-t but not dvb-t2. I'm living in
>>>>> berlin
>>>>> so it should work. w_scan is scanning dvb-t2 and seems
>>>>> to find channels:
>>>>>
>>>>> Scanning DVB-T2...
>>>>> Scanning 7MHz frequencies...
>>>>> 177500: (time: 02:17.828)
>>>>> 184500: (time: 02:19.828)
>>>>> 191500: (time: 02:21.876)
>>>>> 198500: (time: 02:23.924)
>>>>> 205500: (time: 02:25.971)
>>>>> 212500: (time: 02:27.971)
>>>>> 219500: (time: 02:30.021)
>>>>> 226500: (time: 02:32.071)
>>>>> Scanning 8MHz frequencies...
>>>>> 474000: (time: 02:34.120)
>>>>> 482000: (time: 02:36.121)
>>>>> 490000: (time: 02:38.169)
>>>>> 498000: (time: 02:40.219)
>>>>> 506000: skipped (already known transponder)
>>>>> 514000: (time: 02:42.268)
>>>>> 522000: skipped (already known transponder)
>>>>> 530000: (time: 02:44.318)
>>>>> 538000: (time: 02:46.368)
>>>>> 546000: (time: 02:48.417)
>>>>> 554000: (time: 02:50.417)
>>>>> 562000: (time: 02:52.467)
>>>>> 570000: skipped (already known transponder)
>>>>> 578000: (time: 02:54.467)
>>>>> 586000: (time: 02:56.469)
>>>>> 594000: (time: 02:58.469)
>>>>> 602000: (time: 03:00.518)
>>>>> 610000: (time: 03:02.567)
>>>>> 618000: skipped (already known transponder)
>>>>> 626000: (time: 03:04.617)
>>>>> 634000: (time: 03:06.617)
>>>>> 642000: (time: 03:08.667) signal ok: QAM_AUTO f = 642000 kHz
>>>>> I999B8C999D999T999G999Y999P0 (0:0:0)
>>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) :
>>>>> updating transport_stream_id: -> (0:0:16481)
>>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481)
>>>>> :
>>>>> updating network_id -> (0:12352:16481)
>>>>> QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>>>>> (0:12352:16481)
>>>>> : updating original_network_id -> (8468:12352:16481)
>>>>> updating transponder:
>>>>> (QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0
>>>>> (8468:12352:16481)) 0x0000
>>>>> to (QAM_AUTO f = 650000 kHz I999B8C999D999T32G16Y999P0
>>>>> (8468:12352:16481)) 0x4004
>>>>> new transponder: (QAM_AUTO f = 642000 kHz I999B8C0D0T32G16Y0P1
>>>>> (8468:12352:16497)) 0x4004
>>>>> 650000: skipped (already known transponder)
>>>>> 658000: skipped (already known transponder)
>>>>> 666000: (time: 03:10.382)
>>>>> 674000: (time: 03:12.429)
>>>>> 682000: skipped (already known transponder)
>>>>> 690000: (time: 03:14.476)
>>>>> 698000: (time: 03:16.528)
>>>>> 706000: skipped (already known transponder)
>>>>> 714000: (time: 03:18.575)
>>>>> 722000: (time: 03:20.623)
>>>>> 730000: (time: 03:22.669)
>>>>> 738000: (time: 03:24.716)
>>>>> 746000: (time: 03:26.764)
>>>>> 754000: skipped (already known transponder)
>>>>> 762000: (time: 03:28.811)
>>>>> 770000: (time: 03:30.860)
>>>>> 778000: skipped (already known transponder)
>>>>> 786000: (time: 03:32.908)
>>>>> 794000: (time: 03:34.953)
>>>>> 802000: (time: 03:36.999)
>>>>> 810000: (time: 03:39.045)
>>>>> 818000: (time: 03:41.045)
>>>>> 826000: (time: 03:43.091)
>>>>> 834000: (time: 03:45.137)
>>>>> 842000: (time: 03:47.185)
>>>>> 850000: (time: 03:49.231)
>>>>> 858000: (time: 03:51.277)
>>>>>
>>>>> So the question is, what is going wrong? When i start vlc with dvb-t2
>>>>> channels file for berlin i get:
>>>>>
>>>>> [00007f7e0c01a0e8] ts demux error: cannot peek
>>>>>
>>>>> Any hints appreciated.
>>>>>
>>>>> cheers
>>>>> t.
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-06-23 7:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-18 15:55 dvb usb stick Hauppauge WinTV-soloHD Thomas Stein
2016-06-18 16:56 ` Olli Salonen
2016-06-18 17:17 ` Thomas Stein
2016-06-22 19:10 ` Olli Salonen
2016-06-22 19:25 ` Olli Salonen
2016-06-23 7:08 ` Thomas Stein
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).