* [PATCH] e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler
@ 2014-03-13 20:44 Antti Palosaari
2014-03-13 20:44 ` Antti Palosaari
0 siblings, 1 reply; 4+ messages in thread
From: Antti Palosaari @ 2014-03-13 20:44 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil, Mauro Carvalho Chehab, Antti Palosaari
Now it is a little bit similar than used on V4L2 API... Looks better?
Antti Palosaari (1):
e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler
drivers/media/tuners/Kconfig | 2 +-
drivers/media/tuners/e4000.c | 21 ++++++++++++---------
drivers/media/tuners/e4000.h | 14 --------------
drivers/media/tuners/e4000_priv.h | 2 ++
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 +++++++----
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c | 9 ++++-----
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h | 7 +++++--
7 files changed, 31 insertions(+), 35 deletions(-)
--
1.8.5.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler
2014-03-13 20:44 [PATCH] e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler Antti Palosaari
@ 2014-03-13 20:44 ` Antti Palosaari
2014-03-13 21:24 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 4+ messages in thread
From: Antti Palosaari @ 2014-03-13 20:44 UTC (permalink / raw)
To: linux-media; +Cc: Hans Verkuil, Mauro Carvalho Chehab, Antti Palosaari
Exporting resources using EXPORT_SYMBOL from plain I2C driver is bad
idea. Use V4L2 subdev instead. Functionality is now quite likely as
is done in V4L2 API.
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
---
drivers/media/tuners/Kconfig | 2 +-
drivers/media/tuners/e4000.c | 21 ++++++++++++---------
drivers/media/tuners/e4000.h | 14 --------------
drivers/media/tuners/e4000_priv.h | 2 ++
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 +++++++----
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c | 9 ++++-----
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h | 7 +++++--
7 files changed, 31 insertions(+), 35 deletions(-)
diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
index a128488..85c0d96 100644
--- a/drivers/media/tuners/Kconfig
+++ b/drivers/media/tuners/Kconfig
@@ -203,7 +203,7 @@ config MEDIA_TUNER_TDA18212
config MEDIA_TUNER_E4000
tristate "Elonics E4000 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
+ depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2
select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
diff --git a/drivers/media/tuners/e4000.c b/drivers/media/tuners/e4000.c
index ceed604..650cba0 100644
--- a/drivers/media/tuners/e4000.c
+++ b/drivers/media/tuners/e4000.c
@@ -469,13 +469,10 @@ static const struct dvb_tuner_ops e4000_tuner_ops = {
.get_if_frequency = e4000_get_if_frequency,
};
-struct v4l2_ctrl_handler *e4000_get_ctrl_handler(struct dvb_frontend *fe)
-{
- struct e4000 *s = fe->tuner_priv;
- return &s->hdl;
-}
-EXPORT_SYMBOL(e4000_get_ctrl_handler);
-
+/*
+ * Use V4L2 subdev to carry V4L2 control handler, even we don't implement
+ * subdev itself, just to avoid reinventing the wheel.
+ */
static int e4000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -554,6 +551,8 @@ static int e4000_probe(struct i2c_client *client,
goto err;
}
+ s->sd.ctrl_handler = &s->hdl;
+
dev_info(&s->client->dev,
"%s: Elonics E4000 successfully identified\n",
KBUILD_MODNAME);
@@ -561,7 +560,10 @@ static int e4000_probe(struct i2c_client *client,
fe->tuner_priv = s;
memcpy(&fe->ops.tuner_ops, &e4000_tuner_ops,
sizeof(struct dvb_tuner_ops));
- i2c_set_clientdata(client, s);
+
+ v4l2_set_subdevdata(&s->sd, client);
+ i2c_set_clientdata(client, &s->sd);
+
err:
if (ret) {
dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
@@ -573,7 +575,8 @@ err:
static int e4000_remove(struct i2c_client *client)
{
- struct e4000 *s = i2c_get_clientdata(client);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct e4000 *s = container_of(sd, struct e4000, sd);
struct dvb_frontend *fe = s->fe;
dev_dbg(&client->dev, "%s:\n", __func__);
diff --git a/drivers/media/tuners/e4000.h b/drivers/media/tuners/e4000.h
index 989f2ea..e74b8b2 100644
--- a/drivers/media/tuners/e4000.h
+++ b/drivers/media/tuners/e4000.h
@@ -40,18 +40,4 @@ struct e4000_config {
u32 clock;
};
-#if IS_ENABLED(CONFIG_MEDIA_TUNER_E4000)
-extern struct v4l2_ctrl_handler *e4000_get_ctrl_handler(
- struct dvb_frontend *fe
-);
-#else
-static inline struct v4l2_ctrl_handler *e4000_get_ctrl_handler(
- struct dvb_frontend *fe
-)
-{
- pr_warn("%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif
-
#endif
diff --git a/drivers/media/tuners/e4000_priv.h b/drivers/media/tuners/e4000_priv.h
index ee36de1..cb00704 100644
--- a/drivers/media/tuners/e4000_priv.h
+++ b/drivers/media/tuners/e4000_priv.h
@@ -23,6 +23,7 @@
#include "e4000.h"
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
#include <linux/regmap.h>
struct e4000 {
@@ -30,6 +31,7 @@ struct e4000 {
struct regmap *regmap;
u32 clock;
struct dvb_frontend *fe;
+ struct v4l2_subdev sd;
bool active;
/* Controls */
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index 3474aba..3821fbb 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -908,7 +908,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
/* attach SDR */
dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
- &rtl28xxu_rtl2832_fc0012_config);
+ &rtl28xxu_rtl2832_fc0012_config, NULL);
break;
case TUNER_RTL2832_FC0013:
fe = dvb_attach(fc0013_attach, adap->fe[0],
@@ -920,9 +920,10 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
/* attach SDR */
dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
- &rtl28xxu_rtl2832_fc0013_config);
+ &rtl28xxu_rtl2832_fc0013_config, NULL);
break;
case TUNER_RTL2832_E4000: {
+ struct v4l2_subdev *sd;
struct i2c_adapter *i2c_adap_internal =
rtl2832_get_private_i2c_adapter(adap->fe[0]);
struct e4000_config e4000_config = {
@@ -938,12 +939,14 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
priv->client = i2c_new_device(priv->demod_i2c_adapter,
&info);
+ sd = i2c_get_clientdata(priv->client);
+
i2c_set_adapdata(i2c_adap_internal, d);
/* attach SDR */
dvb_attach(rtl2832_sdr_attach, adap->fe[0],
i2c_adap_internal,
- &rtl28xxu_rtl2832_e4000_config);
+ &rtl28xxu_rtl2832_e4000_config, sd);
}
break;
case TUNER_RTL2832_FC2580:
@@ -973,7 +976,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
/* attach SDR */
dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
- &rtl28xxu_rtl2832_r820t_config);
+ &rtl28xxu_rtl2832_r820t_config, NULL);
break;
case TUNER_RTL2832_R828D:
/* power off mn88472 demod on GPIO0 */
diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
index c2c3c3d..b34a148 100644
--- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
+++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
@@ -25,7 +25,6 @@
#include "dvb_frontend.h"
#include "rtl2832_sdr.h"
#include "dvb_usb.h"
-#include "e4000.h"
#include "r820t.h"
#include <media/v4l2-device.h>
@@ -1367,7 +1366,8 @@ static void rtl2832_sdr_video_release(struct v4l2_device *v)
}
struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, const struct rtl2832_config *cfg)
+ struct i2c_adapter *i2c, const struct rtl2832_config *cfg,
+ struct v4l2_subdev *sd)
{
int ret;
struct rtl2832_sdr_state *s;
@@ -1414,10 +1414,9 @@ struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
/* Register controls */
switch (s->cfg->tuner) {
case RTL2832_TUNER_E4000:
- hdl = e4000_get_ctrl_handler(fe);
v4l2_ctrl_handler_init(&s->hdl, 9);
- if (hdl)
- v4l2_ctrl_add_handler(&s->hdl, hdl, NULL);
+ if (sd)
+ v4l2_ctrl_add_handler(&s->hdl, sd->ctrl_handler, NULL);
break;
case RTL2832_TUNER_R820T:
v4l2_ctrl_handler_init(&s->hdl, 8);
diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
index 0803e45..b865fad 100644
--- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
+++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
@@ -32,16 +32,19 @@
#define RTL2832_SDR_H
#include <linux/kconfig.h>
+#include <media/v4l2-subdev.h>
/* for config struct */
#include "rtl2832.h"
#if IS_ENABLED(CONFIG_DVB_RTL2832_SDR)
extern struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, const struct rtl2832_config *cfg);
+ struct i2c_adapter *i2c, const struct rtl2832_config *cfg,
+ struct v4l2_subdev *sd);
#else
static inline struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c, const struct rtl2832_config *cfg)
+ struct i2c_adapter *i2c, const struct rtl2832_config *cfg,
+ struct v4l2_subdev *sd)
{
dev_warn(&i2c->dev, "%s: driver disabled by Kconfig\n", __func__);
return NULL;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler
2014-03-13 20:44 ` Antti Palosaari
@ 2014-03-13 21:24 ` Mauro Carvalho Chehab
2014-03-13 21:56 ` Antti Palosaari
0 siblings, 1 reply; 4+ messages in thread
From: Mauro Carvalho Chehab @ 2014-03-13 21:24 UTC (permalink / raw)
To: Antti Palosaari; +Cc: linux-media, Hans Verkuil
Em Thu, 13 Mar 2014 22:44:14 +0200
Antti Palosaari <crope@iki.fi> escreveu:
> Exporting resources using EXPORT_SYMBOL from plain I2C driver is bad
> idea. Use V4L2 subdev instead. Functionality is now quite likely as
> is done in V4L2 API.
Much better!
Thanks!
Mauro
>
> Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
> Cc: Hans Verkuil <hverkuil@xs4all.nl>
> Signed-off-by: Antti Palosaari <crope@iki.fi>
> ---
> drivers/media/tuners/Kconfig | 2 +-
> drivers/media/tuners/e4000.c | 21 ++++++++++++---------
> drivers/media/tuners/e4000.h | 14 --------------
> drivers/media/tuners/e4000_priv.h | 2 ++
> drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 +++++++----
> drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c | 9 ++++-----
> drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h | 7 +++++--
> 7 files changed, 31 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
> index a128488..85c0d96 100644
> --- a/drivers/media/tuners/Kconfig
> +++ b/drivers/media/tuners/Kconfig
> @@ -203,7 +203,7 @@ config MEDIA_TUNER_TDA18212
>
> config MEDIA_TUNER_E4000
> tristate "Elonics E4000 silicon tuner"
> - depends on MEDIA_SUPPORT && I2C
> + depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2
> select REGMAP_I2C
> default m if !MEDIA_SUBDRV_AUTOSELECT
> help
> diff --git a/drivers/media/tuners/e4000.c b/drivers/media/tuners/e4000.c
> index ceed604..650cba0 100644
> --- a/drivers/media/tuners/e4000.c
> +++ b/drivers/media/tuners/e4000.c
> @@ -469,13 +469,10 @@ static const struct dvb_tuner_ops e4000_tuner_ops = {
> .get_if_frequency = e4000_get_if_frequency,
> };
>
> -struct v4l2_ctrl_handler *e4000_get_ctrl_handler(struct dvb_frontend *fe)
> -{
> - struct e4000 *s = fe->tuner_priv;
> - return &s->hdl;
> -}
> -EXPORT_SYMBOL(e4000_get_ctrl_handler);
> -
> +/*
> + * Use V4L2 subdev to carry V4L2 control handler, even we don't implement
> + * subdev itself, just to avoid reinventing the wheel.
> + */
> static int e4000_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -554,6 +551,8 @@ static int e4000_probe(struct i2c_client *client,
> goto err;
> }
>
> + s->sd.ctrl_handler = &s->hdl;
> +
> dev_info(&s->client->dev,
> "%s: Elonics E4000 successfully identified\n",
> KBUILD_MODNAME);
> @@ -561,7 +560,10 @@ static int e4000_probe(struct i2c_client *client,
> fe->tuner_priv = s;
> memcpy(&fe->ops.tuner_ops, &e4000_tuner_ops,
> sizeof(struct dvb_tuner_ops));
> - i2c_set_clientdata(client, s);
> +
> + v4l2_set_subdevdata(&s->sd, client);
> + i2c_set_clientdata(client, &s->sd);
> +
> err:
> if (ret) {
> dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
> @@ -573,7 +575,8 @@ err:
>
> static int e4000_remove(struct i2c_client *client)
> {
> - struct e4000 *s = i2c_get_clientdata(client);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct e4000 *s = container_of(sd, struct e4000, sd);
> struct dvb_frontend *fe = s->fe;
>
> dev_dbg(&client->dev, "%s:\n", __func__);
> diff --git a/drivers/media/tuners/e4000.h b/drivers/media/tuners/e4000.h
> index 989f2ea..e74b8b2 100644
> --- a/drivers/media/tuners/e4000.h
> +++ b/drivers/media/tuners/e4000.h
> @@ -40,18 +40,4 @@ struct e4000_config {
> u32 clock;
> };
>
> -#if IS_ENABLED(CONFIG_MEDIA_TUNER_E4000)
> -extern struct v4l2_ctrl_handler *e4000_get_ctrl_handler(
> - struct dvb_frontend *fe
> -);
> -#else
> -static inline struct v4l2_ctrl_handler *e4000_get_ctrl_handler(
> - struct dvb_frontend *fe
> -)
> -{
> - pr_warn("%s: driver disabled by Kconfig\n", __func__);
> - return NULL;
> -}
> -#endif
> -
> #endif
> diff --git a/drivers/media/tuners/e4000_priv.h b/drivers/media/tuners/e4000_priv.h
> index ee36de1..cb00704 100644
> --- a/drivers/media/tuners/e4000_priv.h
> +++ b/drivers/media/tuners/e4000_priv.h
> @@ -23,6 +23,7 @@
>
> #include "e4000.h"
> #include <media/v4l2-ctrls.h>
> +#include <media/v4l2-subdev.h>
> #include <linux/regmap.h>
>
> struct e4000 {
> @@ -30,6 +31,7 @@ struct e4000 {
> struct regmap *regmap;
> u32 clock;
> struct dvb_frontend *fe;
> + struct v4l2_subdev sd;
> bool active;
>
> /* Controls */
> diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> index 3474aba..3821fbb 100644
> --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> @@ -908,7 +908,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
>
> /* attach SDR */
> dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
> - &rtl28xxu_rtl2832_fc0012_config);
> + &rtl28xxu_rtl2832_fc0012_config, NULL);
> break;
> case TUNER_RTL2832_FC0013:
> fe = dvb_attach(fc0013_attach, adap->fe[0],
> @@ -920,9 +920,10 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
>
> /* attach SDR */
> dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
> - &rtl28xxu_rtl2832_fc0013_config);
> + &rtl28xxu_rtl2832_fc0013_config, NULL);
> break;
> case TUNER_RTL2832_E4000: {
> + struct v4l2_subdev *sd;
> struct i2c_adapter *i2c_adap_internal =
> rtl2832_get_private_i2c_adapter(adap->fe[0]);
> struct e4000_config e4000_config = {
> @@ -938,12 +939,14 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
> priv->client = i2c_new_device(priv->demod_i2c_adapter,
> &info);
>
> + sd = i2c_get_clientdata(priv->client);
> +
> i2c_set_adapdata(i2c_adap_internal, d);
>
> /* attach SDR */
> dvb_attach(rtl2832_sdr_attach, adap->fe[0],
> i2c_adap_internal,
> - &rtl28xxu_rtl2832_e4000_config);
> + &rtl28xxu_rtl2832_e4000_config, sd);
> }
> break;
> case TUNER_RTL2832_FC2580:
> @@ -973,7 +976,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
>
> /* attach SDR */
> dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap,
> - &rtl28xxu_rtl2832_r820t_config);
> + &rtl28xxu_rtl2832_r820t_config, NULL);
> break;
> case TUNER_RTL2832_R828D:
> /* power off mn88472 demod on GPIO0 */
> diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
> index c2c3c3d..b34a148 100644
> --- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
> +++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
> @@ -25,7 +25,6 @@
> #include "dvb_frontend.h"
> #include "rtl2832_sdr.h"
> #include "dvb_usb.h"
> -#include "e4000.h"
> #include "r820t.h"
>
> #include <media/v4l2-device.h>
> @@ -1367,7 +1366,8 @@ static void rtl2832_sdr_video_release(struct v4l2_device *v)
> }
>
> struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
> - struct i2c_adapter *i2c, const struct rtl2832_config *cfg)
> + struct i2c_adapter *i2c, const struct rtl2832_config *cfg,
> + struct v4l2_subdev *sd)
> {
> int ret;
> struct rtl2832_sdr_state *s;
> @@ -1414,10 +1414,9 @@ struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
> /* Register controls */
> switch (s->cfg->tuner) {
> case RTL2832_TUNER_E4000:
> - hdl = e4000_get_ctrl_handler(fe);
> v4l2_ctrl_handler_init(&s->hdl, 9);
> - if (hdl)
> - v4l2_ctrl_add_handler(&s->hdl, hdl, NULL);
> + if (sd)
> + v4l2_ctrl_add_handler(&s->hdl, sd->ctrl_handler, NULL);
> break;
> case RTL2832_TUNER_R820T:
> v4l2_ctrl_handler_init(&s->hdl, 8);
> diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
> index 0803e45..b865fad 100644
> --- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
> +++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
> @@ -32,16 +32,19 @@
> #define RTL2832_SDR_H
>
> #include <linux/kconfig.h>
> +#include <media/v4l2-subdev.h>
>
> /* for config struct */
> #include "rtl2832.h"
>
> #if IS_ENABLED(CONFIG_DVB_RTL2832_SDR)
> extern struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
> - struct i2c_adapter *i2c, const struct rtl2832_config *cfg);
> + struct i2c_adapter *i2c, const struct rtl2832_config *cfg,
> + struct v4l2_subdev *sd);
> #else
> static inline struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
> - struct i2c_adapter *i2c, const struct rtl2832_config *cfg)
> + struct i2c_adapter *i2c, const struct rtl2832_config *cfg,
> + struct v4l2_subdev *sd)
> {
> dev_warn(&i2c->dev, "%s: driver disabled by Kconfig\n", __func__);
> return NULL;
--
Regards,
Mauro
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler
2014-03-13 21:24 ` Mauro Carvalho Chehab
@ 2014-03-13 21:56 ` Antti Palosaari
0 siblings, 0 replies; 4+ messages in thread
From: Antti Palosaari @ 2014-03-13 21:56 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: linux-media, Hans Verkuil
On 13.03.2014 23:24, Mauro Carvalho Chehab wrote:
> Em Thu, 13 Mar 2014 22:44:14 +0200
> Antti Palosaari <crope@iki.fi> escreveu:
>
>> Exporting resources using EXPORT_SYMBOL from plain I2C driver is bad
>> idea. Use V4L2 subdev instead. Functionality is now quite likely as
>> is done in V4L2 API.
>
> Much better!
OK, rebasing tree...
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-03-13 21:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-03-13 20:44 [PATCH] e4000/rtl2832u_sdr: use V4L2 subdev to pass V4L2 control handler Antti Palosaari
2014-03-13 20:44 ` Antti Palosaari
2014-03-13 21:24 ` Mauro Carvalho Chehab
2014-03-13 21:56 ` Antti Palosaari
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).