[RFC PATCH] media: v4l2-ctrl: Add control for specific V4L2_EVENT_SRC_CH_RESOLUTION support

[RFC PATCH] media: v4l2-ctrl: Add control for specific V4L2_EVENT_SRC_CH_RESOLUTION support

[Maxime Jourdan]

For drivers that expose both an OUTPUT queue and
V4L2_EVENT_SRC_CH_RESOLUTION such as video decoders, it is
possible that support for this event is limited to a subset
of the enumerated OUTPUT formats.

This adds V4L2_CID_SUPPORTS_CH_RESOLUTION that allows such a driver to
notify userspace of per-format support for this event.

RFC notes: This patch is motivated by the work I'm doing on the Amlogic
video decoder where the firmwares allow me to support
V4L2_EVENT_SRC_CH_RESOLUTION for newer formats (H.264, HEVC..) but
can't support it for older ones (MPEG2, MPEG4, MJPEG..).
For the latter formats, userspace is expected to set the resolution via
S_FMT prior to decoding.

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
---
 Documentation/media/uapi/v4l/control.rst | 7 +++++++
 drivers/media/v4l2-core/v4l2-ctrls.c     | 3 +++
 include/uapi/linux/v4l2-controls.h       | 4 +++-
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst
index c1e6adbe83d7..029a4e88bfd5 100644
--- a/Documentation/media/uapi/v4l/control.rst
+++ b/Documentation/media/uapi/v4l/control.rst
@@ -297,6 +297,13 @@ Control IDs
     set the alpha component value of all pixels for further processing
     in the device.
 
+``V4L2_CID_SUPPORTS_CH_RESOLUTION`` ``(boolean)``
+    This is a read-only control that can be read by the application when
+    the driver exposes an OUTPUT queue and event
+    ``V4L2_EVENT_SRC_CH_RESOLUTION`` but doesn't support it for every
+    OUTPUT format. It returns true if the currently selected OUTPUT format
+    supports this event.
+
 ``V4L2_CID_LASTP1``
     End of the predefined control IDs (currently
     ``V4L2_CID_ALPHA_COMPONENT`` + 1).
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 599c1cbff3b9..a8037ff3935a 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -739,6 +739,7 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:	return "Min Number of Output Buffers";
 	case V4L2_CID_ALPHA_COMPONENT:		return "Alpha Component";
 	case V4L2_CID_COLORFX_CBCR:		return "Color Effects, CbCr";
+	case V4L2_CID_SUPPORTS_CH_RESOLUTION:	return "Supports Change Resolution";
 
 	/* Codec controls */
 	/* The MPEG controls are applicable to all codec controls
@@ -1074,6 +1075,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	*flags = 0;
 
 	switch (id) {
+	case V4L2_CID_SUPPORTS_CH_RESOLUTION:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
 	case V4L2_CID_AUDIO_MUTE:
 	case V4L2_CID_AUDIO_LOUDNESS:
 	case V4L2_CID_AUTO_WHITE_BALANCE:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index e4ee10ee917d..c874fdd28f40 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -141,8 +141,10 @@ enum v4l2_colorfx {
 #define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
 #define V4L2_CID_COLORFX_CBCR			(V4L2_CID_BASE+42)
 
+#define V4L2_CID_SUPPORTS_CH_RESOLUTION		(V4L2_CID_BASE+43)
+
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+44)
 
 /* USER-class private control IDs */
 
-- 
2.19.0

Re: [RFC PATCH] media: v4l2-ctrl: Add control for specific V4L2_EVENT_SRC_CH_RESOLUTION support

[Hans Verkuil]

On 10/02/18 13:31, Maxime Jourdan wrote:
> For drivers that expose both an OUTPUT queue and
> V4L2_EVENT_SRC_CH_RESOLUTION such as video decoders, it is
> possible that support for this event is limited to a subset
> of the enumerated OUTPUT formats.
> 
> This adds V4L2_CID_SUPPORTS_CH_RESOLUTION that allows such a driver to
> notify userspace of per-format support for this event.

An alternative is a flag returned by ENUMFMT.

I would definitely invert the flag/control since the default should be
that this event is supported for these types of devices. Instead you
want to signal the exception (not supported).

I think a format flag is better since this is really tied to the format
for this particular driver.

This is a limitation of this hardware/firmware, right? It is not a
limitation of the format itself?

And basically the decoder hardware cannot report when the resolution
changes midstream? What happens if userspace does not take this into
account and just continue? DMA overflow? Hope not.

Regards,

	Hans

> 
> RFC notes: This patch is motivated by the work I'm doing on the Amlogic
> video decoder where the firmwares allow me to support
> V4L2_EVENT_SRC_CH_RESOLUTION for newer formats (H.264, HEVC..) but
> can't support it for older ones (MPEG2, MPEG4, MJPEG..).
> For the latter formats, userspace is expected to set the resolution via
> S_FMT prior to decoding.
> 
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> ---
>  Documentation/media/uapi/v4l/control.rst | 7 +++++++
>  drivers/media/v4l2-core/v4l2-ctrls.c     | 3 +++
>  include/uapi/linux/v4l2-controls.h       | 4 +++-
>  3 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst
> index c1e6adbe83d7..029a4e88bfd5 100644
> --- a/Documentation/media/uapi/v4l/control.rst
> +++ b/Documentation/media/uapi/v4l/control.rst
> @@ -297,6 +297,13 @@ Control IDs
>      set the alpha component value of all pixels for further processing
>      in the device.
>  
> +``V4L2_CID_SUPPORTS_CH_RESOLUTION`` ``(boolean)``
> +    This is a read-only control that can be read by the application when
> +    the driver exposes an OUTPUT queue and event
> +    ``V4L2_EVENT_SRC_CH_RESOLUTION`` but doesn't support it for every
> +    OUTPUT format. It returns true if the currently selected OUTPUT format
> +    supports this event.
> +
>  ``V4L2_CID_LASTP1``
>      End of the predefined control IDs (currently
>      ``V4L2_CID_ALPHA_COMPONENT`` + 1).
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> index 599c1cbff3b9..a8037ff3935a 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -739,6 +739,7 @@ const char *v4l2_ctrl_get_name(u32 id)
>  	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:	return "Min Number of Output Buffers";
>  	case V4L2_CID_ALPHA_COMPONENT:		return "Alpha Component";
>  	case V4L2_CID_COLORFX_CBCR:		return "Color Effects, CbCr";
> +	case V4L2_CID_SUPPORTS_CH_RESOLUTION:	return "Supports Change Resolution";
>  
>  	/* Codec controls */
>  	/* The MPEG controls are applicable to all codec controls
> @@ -1074,6 +1075,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
>  	*flags = 0;
>  
>  	switch (id) {
> +	case V4L2_CID_SUPPORTS_CH_RESOLUTION:
> +		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
>  	case V4L2_CID_AUDIO_MUTE:
>  	case V4L2_CID_AUDIO_LOUDNESS:
>  	case V4L2_CID_AUTO_WHITE_BALANCE:
> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> index e4ee10ee917d..c874fdd28f40 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -141,8 +141,10 @@ enum v4l2_colorfx {
>  #define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
>  #define V4L2_CID_COLORFX_CBCR			(V4L2_CID_BASE+42)
>  
> +#define V4L2_CID_SUPPORTS_CH_RESOLUTION		(V4L2_CID_BASE+43)
> +
>  /* last CID + 1 */
> -#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
> +#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+44)
>  
>  /* USER-class private control IDs */
>  
> 

Re: [RFC PATCH] media: v4l2-ctrl: Add control for specific V4L2_EVENT_SRC_CH_RESOLUTION support

[Tomasz Figa]

On Tue, Oct 2, 2018 at 8:44 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> On 10/02/18 13:31, Maxime Jourdan wrote:
> > For drivers that expose both an OUTPUT queue and
> > V4L2_EVENT_SRC_CH_RESOLUTION such as video decoders, it is
> > possible that support for this event is limited to a subset
> > of the enumerated OUTPUT formats.
> >
> > This adds V4L2_CID_SUPPORTS_CH_RESOLUTION that allows such a driver to
> > notify userspace of per-format support for this event.
>
> An alternative is a flag returned by ENUMFMT.
>
> I would definitely invert the flag/control since the default should be
> that this event is supported for these types of devices. Instead you
> want to signal the exception (not supported).
>
> I think a format flag is better since this is really tied to the format
> for this particular driver.

+1 for format flag. It will also make it easier for userspace to
enumerate the capabilities. For example, userspace that doesn't want
to handle resolution changes on its own (e.g. Chromium), could just
discard the formats for which the hardware/firmware doesn't handle
them.

Best regards,
Tomasz

Re: [RFC PATCH] media: v4l2-ctrl: Add control for specific V4L2_EVENT_SRC_CH_RESOLUTION support

[Maxime Jourdan]

On Tue, Oct 2, 2018 at 1:43 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
>
> On 10/02/18 13:31, Maxime Jourdan wrote:
> > For drivers that expose both an OUTPUT queue and
> > V4L2_EVENT_SRC_CH_RESOLUTION such as video decoders, it is
> > possible that support for this event is limited to a subset
> > of the enumerated OUTPUT formats.
> >
> > This adds V4L2_CID_SUPPORTS_CH_RESOLUTION that allows such a driver to
> > notify userspace of per-format support for this event.
>
> An alternative is a flag returned by ENUMFMT.
>
> I would definitely invert the flag/control since the default should be
> that this event is supported for these types of devices. Instead you
> want to signal the exception (not supported).
>
> I think a format flag is better since this is really tied to the format
> for this particular driver.
>
> This is a limitation of this hardware/firmware, right? It is not a
> limitation of the format itself?
>
> And basically the decoder hardware cannot report when the resolution
> changes midstream? What happens if userspace does not take this into
> account and just continue? DMA overflow? Hope not.
>

I tested it: yep, DMA overflow if you're not careful. A solution is to
always allocate buffers that can hold the maximum decodable picture
size.

Upon further investigation, the firmwares for older codecs (MPEG2 &
MPEG4) expose registers to fetch the parsed width/height.
There is one issue however: the decoder starts decoding right away,
and we can gather the width/height only on the first frame decoded,
which is the first interrupt we get.

So I can send out a V4L2_EVENT_SRC_CH_RESOLUTION, the last remaining
problem is that these codecs don't support dynamically changing the
capture buffers, so you can't do a streamoff/reqbufs/streamon on the
capture queue without doing a full reset and losing the pending
capture/output frames.

And then there's MJPEG where you just can't gather the width/height
and must rely on userspace setting it. Also need to allocate max size
capture buffers for that one.

I end up needing two ENUMFMT flags:
 - the format doesn't support V4L2_EVENT_SRC_CH_RESOLUTION
 - the format doesn't support dynamically changing the capture buffers
(but you can keep going with the original buffer set)

Would this be okay ?

Regards,
Maxime

> Regards,
>
>         Hans
>
> >
> > RFC notes: This patch is motivated by the work I'm doing on the Amlogic
> > video decoder where the firmwares allow me to support
> > V4L2_EVENT_SRC_CH_RESOLUTION for newer formats (H.264, HEVC..) but
> > can't support it for older ones (MPEG2, MPEG4, MJPEG..).
> > For the latter formats, userspace is expected to set the resolution via
> > S_FMT prior to decoding.
> >
> > Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> > ---
> >  Documentation/media/uapi/v4l/control.rst | 7 +++++++
> >  drivers/media/v4l2-core/v4l2-ctrls.c     | 3 +++
> >  include/uapi/linux/v4l2-controls.h       | 4 +++-
> >  3 files changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst
> > index c1e6adbe83d7..029a4e88bfd5 100644
> > --- a/Documentation/media/uapi/v4l/control.rst
> > +++ b/Documentation/media/uapi/v4l/control.rst
> > @@ -297,6 +297,13 @@ Control IDs
> >      set the alpha component value of all pixels for further processing
> >      in the device.
> >
> > +``V4L2_CID_SUPPORTS_CH_RESOLUTION`` ``(boolean)``
> > +    This is a read-only control that can be read by the application when
> > +    the driver exposes an OUTPUT queue and event
> > +    ``V4L2_EVENT_SRC_CH_RESOLUTION`` but doesn't support it for every
> > +    OUTPUT format. It returns true if the currently selected OUTPUT format
> > +    supports this event.
> > +
> >  ``V4L2_CID_LASTP1``
> >      End of the predefined control IDs (currently
> >      ``V4L2_CID_ALPHA_COMPONENT`` + 1).
> > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> > index 599c1cbff3b9..a8037ff3935a 100644
> > --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> > @@ -739,6 +739,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> >       case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:   return "Min Number of Output Buffers";
> >       case V4L2_CID_ALPHA_COMPONENT:          return "Alpha Component";
> >       case V4L2_CID_COLORFX_CBCR:             return "Color Effects, CbCr";
> > +     case V4L2_CID_SUPPORTS_CH_RESOLUTION:   return "Supports Change Resolution";
> >
> >       /* Codec controls */
> >       /* The MPEG controls are applicable to all codec controls
> > @@ -1074,6 +1075,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> >       *flags = 0;
> >
> >       switch (id) {
> > +     case V4L2_CID_SUPPORTS_CH_RESOLUTION:
> > +             *flags |= V4L2_CTRL_FLAG_READ_ONLY;
> >       case V4L2_CID_AUDIO_MUTE:
> >       case V4L2_CID_AUDIO_LOUDNESS:
> >       case V4L2_CID_AUTO_WHITE_BALANCE:
> > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> > index e4ee10ee917d..c874fdd28f40 100644
> > --- a/include/uapi/linux/v4l2-controls.h
> > +++ b/include/uapi/linux/v4l2-controls.h
> > @@ -141,8 +141,10 @@ enum v4l2_colorfx {
> >  #define V4L2_CID_ALPHA_COMPONENT             (V4L2_CID_BASE+41)
> >  #define V4L2_CID_COLORFX_CBCR                        (V4L2_CID_BASE+42)
> >
> > +#define V4L2_CID_SUPPORTS_CH_RESOLUTION              (V4L2_CID_BASE+43)
> > +
> >  /* last CID + 1 */
> > -#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
> > +#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+44)
> >
> >  /* USER-class private control IDs */
> >
> >
>

Re: [RFC PATCH] media: v4l2-ctrl: Add control for specific V4L2_EVENT_SRC_CH_RESOLUTION support

[Tomasz Figa]

On Wed, Oct 3, 2018 at 7:02 PM Maxime Jourdan <mjourdan@baylibre.com> wrote:
>
> On Tue, Oct 2, 2018 at 1:43 PM Hans Verkuil <hverkuil@xs4all.nl> wrote:
> >
> > On 10/02/18 13:31, Maxime Jourdan wrote:
> > > For drivers that expose both an OUTPUT queue and
> > > V4L2_EVENT_SRC_CH_RESOLUTION such as video decoders, it is
> > > possible that support for this event is limited to a subset
> > > of the enumerated OUTPUT formats.
> > >
> > > This adds V4L2_CID_SUPPORTS_CH_RESOLUTION that allows such a driver to
> > > notify userspace of per-format support for this event.
> >
> > An alternative is a flag returned by ENUMFMT.
> >
> > I would definitely invert the flag/control since the default should be
> > that this event is supported for these types of devices. Instead you
> > want to signal the exception (not supported).
> >
> > I think a format flag is better since this is really tied to the format
> > for this particular driver.
> >
> > This is a limitation of this hardware/firmware, right? It is not a
> > limitation of the format itself?
> >
> > And basically the decoder hardware cannot report when the resolution
> > changes midstream? What happens if userspace does not take this into
> > account and just continue? DMA overflow? Hope not.
> >
>
> I tested it: yep, DMA overflow if you're not careful. A solution is to
> always allocate buffers that can hold the maximum decodable picture
> size.
>
> Upon further investigation, the firmwares for older codecs (MPEG2 &
> MPEG4) expose registers to fetch the parsed width/height.
> There is one issue however: the decoder starts decoding right away,
> and we can gather the width/height only on the first frame decoded,
> which is the first interrupt we get.
>
> So I can send out a V4L2_EVENT_SRC_CH_RESOLUTION, the last remaining
> problem is that these codecs don't support dynamically changing the
> capture buffers, so you can't do a streamoff/reqbufs/streamon on the
> capture queue without doing a full reset and losing the pending
> capture/output frames.

I believe that, if there was a resolution change, you need to do a
full reset anyway, before you can continue decoding. So it doesn't
sound like a problem. Or am I missing something?

>
> And then there's MJPEG where you just can't gather the width/height
> and must rely on userspace setting it. Also need to allocate max size
> capture buffers for that one.

I guess that could be a case for the JPEG_RAW format, which moves the
responsibility for parsing the headers and setting relevant parameters
(format, controls) to userspace.

>
> I end up needing two ENUMFMT flags:
>  - the format doesn't support V4L2_EVENT_SRC_CH_RESOLUTION
>  - the format doesn't support dynamically changing the capture buffers
> (but you can keep going with the original buffer set)
>
> Would this be okay ?

With my replies above, would you still need any of those?

Best regards,
Tomasz

>
> Regards,
> Maxime
>
> > Regards,
> >
> >         Hans
> >
> > >
> > > RFC notes: This patch is motivated by the work I'm doing on the Amlogic
> > > video decoder where the firmwares allow me to support
> > > V4L2_EVENT_SRC_CH_RESOLUTION for newer formats (H.264, HEVC..) but
> > > can't support it for older ones (MPEG2, MPEG4, MJPEG..).
> > > For the latter formats, userspace is expected to set the resolution via
> > > S_FMT prior to decoding.
> > >
> > > Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> > > ---
> > >  Documentation/media/uapi/v4l/control.rst | 7 +++++++
> > >  drivers/media/v4l2-core/v4l2-ctrls.c     | 3 +++
> > >  include/uapi/linux/v4l2-controls.h       | 4 +++-
> > >  3 files changed, 13 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst
> > > index c1e6adbe83d7..029a4e88bfd5 100644
> > > --- a/Documentation/media/uapi/v4l/control.rst
> > > +++ b/Documentation/media/uapi/v4l/control.rst
> > > @@ -297,6 +297,13 @@ Control IDs
> > >      set the alpha component value of all pixels for further processing
> > >      in the device.
> > >
> > > +``V4L2_CID_SUPPORTS_CH_RESOLUTION`` ``(boolean)``
> > > +    This is a read-only control that can be read by the application when
> > > +    the driver exposes an OUTPUT queue and event
> > > +    ``V4L2_EVENT_SRC_CH_RESOLUTION`` but doesn't support it for every
> > > +    OUTPUT format. It returns true if the currently selected OUTPUT format
> > > +    supports this event.
> > > +
> > >  ``V4L2_CID_LASTP1``
> > >      End of the predefined control IDs (currently
> > >      ``V4L2_CID_ALPHA_COMPONENT`` + 1).
> > > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> > > index 599c1cbff3b9..a8037ff3935a 100644
> > > --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> > > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> > > @@ -739,6 +739,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> > >       case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:   return "Min Number of Output Buffers";
> > >       case V4L2_CID_ALPHA_COMPONENT:          return "Alpha Component";
> > >       case V4L2_CID_COLORFX_CBCR:             return "Color Effects, CbCr";
> > > +     case V4L2_CID_SUPPORTS_CH_RESOLUTION:   return "Supports Change Resolution";
> > >
> > >       /* Codec controls */
> > >       /* The MPEG controls are applicable to all codec controls
> > > @@ -1074,6 +1075,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> > >       *flags = 0;
> > >
> > >       switch (id) {
> > > +     case V4L2_CID_SUPPORTS_CH_RESOLUTION:
> > > +             *flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > >       case V4L2_CID_AUDIO_MUTE:
> > >       case V4L2_CID_AUDIO_LOUDNESS:
> > >       case V4L2_CID_AUTO_WHITE_BALANCE:
> > > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> > > index e4ee10ee917d..c874fdd28f40 100644
> > > --- a/include/uapi/linux/v4l2-controls.h
> > > +++ b/include/uapi/linux/v4l2-controls.h
> > > @@ -141,8 +141,10 @@ enum v4l2_colorfx {
> > >  #define V4L2_CID_ALPHA_COMPONENT             (V4L2_CID_BASE+41)
> > >  #define V4L2_CID_COLORFX_CBCR                        (V4L2_CID_BASE+42)
> > >
> > > +#define V4L2_CID_SUPPORTS_CH_RESOLUTION              (V4L2_CID_BASE+43)
> > > +
> > >  /* last CID + 1 */
> > > -#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
> > > +#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+44)
> > >
> > >  /* USER-class private control IDs */
> > >
> > >
> >