[PATCH v6 00/12] media: ov5640: Misc cleanup and improvements

[PATCH v6 00/12] media: ov5640: Misc cleanup and improvements

[Maxime Ripard]

Hi,

Here is a "small" series that mostly cleans up the ov5640 driver code,
slowly getting rid of the big data array for more understandable code
(hopefully).

The biggest addition would be the clock rate computation at runtime,
instead of relying on those arrays to setup the clock tree
properly. As a side effect, it fixes the framerate that was off by
around 10% on the smaller resolutions, and we now support 60fps.

This also introduces a bunch of new features.

Let me know what you think,
Maxime

Changes from v5:
  - Squashed Jacopo patches fixing MIPI-CSI

Changes from v4:
  - Squashed Jacopo patches fixing the MIPI-CSI case
  - Prefer clock rates superior to the ideal clock rate, even if it
    means having a less precise one.
  - Fix the JPEG case according to Hugues suggestions
  - Rebased on 4.20

Changes from v3:
  - Rebased on current Sakari tree
  - Fixed an error when changing only the framerate

Changes from v2:
  - Rebased on latest Sakari PR
  - Fixed the issues reported by Hugues: improper FPS returned for
    formats, improper rounding of the FPS, some with his suggestions,
    some by simplifying the logic.
  - Expanded the clock tree comments based on the feedback from Samuel
    Bobrowicz and Loic Poulain
  - Merged some of the changes made by Samuel Bobrowicz to fix the
    MIPI rate computation, fix the call sites of the
    ov5640_set_timings function, the auto-exposure calculation call,
    etc.
  - Split the patches into smaller ones in order to make it more
    readable (hopefully)

Changes from v1:
  - Integrated Hugues' suggestions to fix v4l2-compliance
  - Fixed the bus width with JPEG
  - Dropped the clock rate calculation loops for something simpler as
    suggested by Sakari
  - Cache the exposure value instead of using the control value
  - Rebased on top of 4.17

Jacopo Mondi (1):
  media: ov5640: Fix set format regression

Maxime Ripard (11):
  media: ov5640: Adjust the clock based on the expected rate
  media: ov5640: Remove the clocks registers initialization
  media: ov5640: Remove redundant defines
  media: ov5640: Remove redundant register setup
  media: ov5640: Compute the clock rate at runtime
  media: ov5640: Remove pixel clock rates
  media: ov5640: Enhance FPS handling
  media: ov5640: Make the return rate type more explicit
  media: ov5640: Make the FPS clamping / rounding more extendable
  media: ov5640: Add 60 fps support
  media: ov5640: Remove duplicate auto-exposure setup

 drivers/media/i2c/ov5640.c | 764 ++++++++++++++++++++++----------------
 1 file changed, 452 insertions(+), 312 deletions(-)

base-commit: 5019ebef9ac7922a8d233cb6fa7a0626454ca80d
-- 
git-series 0.9.1

[PATCH v6 01/12] media: ov5640: Fix set format regression

[Maxime Ripard]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

The set_fmt operations updates the sensor format only when the image format
is changed. When only the image sizes gets changed, the format do not get
updated causing the sensor to always report the one that was previously in
use.

Without this patch, updating frame size only fails:
  [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ...]

With this patch applied:
  [fmt:UYVY8_2X8/1024x768@1/30 field:none colorspace:srgb xfer:srgb ...]

Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame
interval is unchanged")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 drivers/media/i2c/ov5640.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index a91d91715d00..807bd0e386a4 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2021,6 +2021,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
 	const struct ov5640_mode_info *new_mode;
 	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
+	struct v4l2_mbus_framefmt *fmt;
 	int ret;
 
 	if (format->pad != 0)
@@ -2038,22 +2039,20 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
 	if (ret)
 		goto out;
 
-	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
-		struct v4l2_mbus_framefmt *fmt =
-			v4l2_subdev_get_try_format(sd, cfg, 0);
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+	else
+		fmt = &sensor->fmt;
 
-		*fmt = *mbus_fmt;
-		goto out;
-	}
+	*fmt = *mbus_fmt;
 
 	if (new_mode != sensor->current_mode) {
 		sensor->current_mode = new_mode;
 		sensor->pending_mode_change = true;
 	}
-	if (mbus_fmt->code != sensor->fmt.code) {
-		sensor->fmt = *mbus_fmt;
+	if (mbus_fmt->code != sensor->fmt.code)
 		sensor->pending_fmt_change = true;
-	}
+
 out:
 	mutex_unlock(&sensor->lock);
 	return ret;
-- 
git-series 0.9.1

[PATCH v6 02/12] media: ov5640: Adjust the clock based on the expected rate

[Maxime Ripard]

The clock structure for the PCLK is quite obscure in the documentation, and
was hardcoded through the bytes array of each and every mode.

This is troublesome, since we cannot adjust it at runtime based on other
parameters (such as the number of bytes per pixel), and we can't support
either framerates that have not been used by the various vendors, since we
don't have the needed initialization sequence.

We can however understand how the clock tree works, and then implement some
functions to derive the various parameters from a given rate. And now that
those parameters are calculated at runtime, we can remove them from the
initialization sequence.

The modes also gained a new parameter which is the clock that they are
running at, from the register writes they were doing, so for now the switch
to the new algorithm should be transparent.

Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Co-Developed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 drivers/media/i2c/ov5640.c | 365 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 364 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 807bd0e386a4..4254ac958424 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -176,6 +176,7 @@ struct ov5640_mode_info {
 	u32 htot;
 	u32 vact;
 	u32 vtot;
+	u32 pixel_clock;
 	const struct reg_value *reg_data;
 	u32 reg_data_size;
 };
@@ -701,6 +702,7 @@ static const struct reg_value ov5640_setting_15fps_QSXGA_2592_1944[] = {
 /* power-on sensor init reg table */
 static const struct ov5640_mode_info ov5640_mode_init_data = {
 	0, SUBSAMPLING, 640, 1896, 480, 984,
+	56000000,
 	ov5640_init_setting_30fps_VGA,
 	ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
 };
@@ -710,74 +712,91 @@ ov5640_mode_data[OV5640_NUM_FRAMERATES][OV5640_NUM_MODES] = {
 	{
 		{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
 		 176, 1896, 144, 984,
+		 28000000,
 		 ov5640_setting_15fps_QCIF_176_144,
 		 ARRAY_SIZE(ov5640_setting_15fps_QCIF_176_144)},
 		{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
 		 320, 1896, 240, 984,
+		 28000000,
 		 ov5640_setting_15fps_QVGA_320_240,
 		 ARRAY_SIZE(ov5640_setting_15fps_QVGA_320_240)},
 		{OV5640_MODE_VGA_640_480, SUBSAMPLING,
 		 640, 1896, 480, 1080,
+		 28000000,
 		 ov5640_setting_15fps_VGA_640_480,
 		 ARRAY_SIZE(ov5640_setting_15fps_VGA_640_480)},
 		{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
 		 720, 1896, 480, 984,
+		 28000000,
 		 ov5640_setting_15fps_NTSC_720_480,
 		 ARRAY_SIZE(ov5640_setting_15fps_NTSC_720_480)},
 		{OV5640_MODE_PAL_720_576, SUBSAMPLING,
 		 720, 1896, 576, 984,
+		 28000000,
 		 ov5640_setting_15fps_PAL_720_576,
 		 ARRAY_SIZE(ov5640_setting_15fps_PAL_720_576)},
 		{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
 		 1024, 1896, 768, 1080,
+		 28000000,
 		 ov5640_setting_15fps_XGA_1024_768,
 		 ARRAY_SIZE(ov5640_setting_15fps_XGA_1024_768)},
 		{OV5640_MODE_720P_1280_720, SUBSAMPLING,
 		 1280, 1892, 720, 740,
+		 21000000,
 		 ov5640_setting_15fps_720P_1280_720,
 		 ARRAY_SIZE(ov5640_setting_15fps_720P_1280_720)},
 		{OV5640_MODE_1080P_1920_1080, SCALING,
 		 1920, 2500, 1080, 1120,
+		 42000000,
 		 ov5640_setting_15fps_1080P_1920_1080,
 		 ARRAY_SIZE(ov5640_setting_15fps_1080P_1920_1080)},
 		{OV5640_MODE_QSXGA_2592_1944, SCALING,
 		 2592, 2844, 1944, 1968,
+		 84000000,
 		 ov5640_setting_15fps_QSXGA_2592_1944,
 		 ARRAY_SIZE(ov5640_setting_15fps_QSXGA_2592_1944)},
 	}, {
 		{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
 		 176, 1896, 144, 984,
+		 56000000,
 		 ov5640_setting_30fps_QCIF_176_144,
 		 ARRAY_SIZE(ov5640_setting_30fps_QCIF_176_144)},
 		{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
 		 320, 1896, 240, 984,
+		 56000000,
 		 ov5640_setting_30fps_QVGA_320_240,
 		 ARRAY_SIZE(ov5640_setting_30fps_QVGA_320_240)},
 		{OV5640_MODE_VGA_640_480, SUBSAMPLING,
 		 640, 1896, 480, 1080,
+		 56000000,
 		 ov5640_setting_30fps_VGA_640_480,
 		 ARRAY_SIZE(ov5640_setting_30fps_VGA_640_480)},
 		{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
 		 720, 1896, 480, 984,
+		 56000000,
 		 ov5640_setting_30fps_NTSC_720_480,
 		 ARRAY_SIZE(ov5640_setting_30fps_NTSC_720_480)},
 		{OV5640_MODE_PAL_720_576, SUBSAMPLING,
 		 720, 1896, 576, 984,
+		 56000000,
 		 ov5640_setting_30fps_PAL_720_576,
 		 ARRAY_SIZE(ov5640_setting_30fps_PAL_720_576)},
 		{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
 		 1024, 1896, 768, 1080,
+		 56000000,
 		 ov5640_setting_30fps_XGA_1024_768,
 		 ARRAY_SIZE(ov5640_setting_30fps_XGA_1024_768)},
 		{OV5640_MODE_720P_1280_720, SUBSAMPLING,
 		 1280, 1892, 720, 740,
+		 42000000,
 		 ov5640_setting_30fps_720P_1280_720,
 		 ARRAY_SIZE(ov5640_setting_30fps_720P_1280_720)},
 		{OV5640_MODE_1080P_1920_1080, SCALING,
 		 1920, 2500, 1080, 1120,
+		 84000000,
 		 ov5640_setting_30fps_1080P_1920_1080,
 		 ARRAY_SIZE(ov5640_setting_30fps_1080P_1920_1080)},
-		{OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, NULL, 0},
+		{OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, 0, NULL, 0},
 	},
 };
 
@@ -910,6 +929,333 @@ static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg,
 	return ov5640_write_reg(sensor, reg, val);
 }
 
+/*
+ * After trying the various combinations, reading various
+ * documentations spreaded around the net, and from the various
+ * feedback, the clock tree is probably as follows:
+ *
+ *   +--------------+
+ *   |  Ext. Clock  |
+ *   +-+------------+
+ *     |  +----------+
+ *     +->|   PLL1   | - reg 0x3036, for the multiplier
+ *        +-+--------+ - reg 0x3037, bits 0-3 for the pre-divider
+ *          |  +--------------+
+ *          +->| System Clock |  - reg 0x3035, bits 4-7
+ *             +-+------------+
+ *               |  +--------------+
+ *               +->| MIPI Divider | - reg 0x3035, bits 0-3
+ *               |  +-+------------+
+ *               |    +----------------> MIPI SCLK
+ *               |    +  +-----+
+ *               |    +->| / 2 |-------> MIPI BIT CLK
+ *               |       +-----+
+ *               |  +--------------+
+ *               +->| PLL Root Div | - reg 0x3037, bit 4
+ *                  +-+------------+
+ *                    |  +---------+
+ *                    +->| Bit Div | - reg 0x3035, bits 0-3
+ *                       +-+-------+
+ *                         |  +-------------+
+ *                         +->| SCLK Div    | - reg 0x3108, bits 0-1
+ *                         |  +-+-----------+
+ *                         |    +---------------> SCLK
+ *                         |  +-------------+
+ *                         +->| SCLK 2X Div | - reg 0x3108, bits 2-3
+ *                         |  +-+-----------+
+ *                         |    +---------------> SCLK 2X
+ *                         |  +-------------+
+ *                         +->| PCLK Div    | - reg 0x3108, bits 4-5
+ *                            ++------------+
+ *                             +  +-----------+
+ *                             +->|   P_DIV   | - reg 0x3035, bits 0-3
+ *                                +-----+-----+
+ *                                       +------------> PCLK
+ *
+ * This is deviating from the datasheet at least for the register
+ * 0x3108, since it's said here that the PCLK would be clocked from
+ * the PLL.
+ *
+ * There seems to be also (unverified) constraints:
+ *  - the PLL pre-divider output rate should be in the 4-27MHz range
+ *  - the PLL multiplier output rate should be in the 500-1000MHz range
+ *  - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG
+ *
+ * In the two latter cases, these constraints are met since our
+ * factors are hardcoded. If we were to change that, we would need to
+ * take this into account. The only varying parts are the PLL
+ * multiplier and the system clock divider, which are shared between
+ * all these clocks so won't cause any issue.
+ */
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 3 in the vendor kernels.
+ */
+#define OV5640_PLL_PREDIV	3
+
+#define OV5640_PLL_MULT_MIN	4
+#define OV5640_PLL_MULT_MAX	252
+
+/*
+ * This is supposed to be ranging from 1 to 16, but the value is
+ * always set to either 1 or 2 in the vendor kernels.
+ */
+#define OV5640_SYSDIV_MIN	1
+#define OV5640_SYSDIV_MAX	16
+
+/*
+ * Hardcode these values for scaler and non-scaler modes.
+ * FIXME: to be re-calcualted for 1 data lanes setups
+ */
+#define OV5640_MIPI_DIV_PCLK	2
+#define OV5640_MIPI_DIV_SCLK	1
+
+/*
+ * This is supposed to be ranging from 1 to 2, but the value is always
+ * set to 2 in the vendor kernels.
+ */
+#define OV5640_PLL_ROOT_DIV			2
+#define OV5640_PLL_CTRL3_PLL_ROOT_DIV_2		BIT(4)
+
+/*
+ * We only supports 8-bit formats at the moment
+ */
+#define OV5640_BIT_DIV				2
+#define OV5640_PLL_CTRL0_MIPI_MODE_8BIT		0x08
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 2 in the vendor kernels.
+ */
+#define OV5640_SCLK_ROOT_DIV	2
+
+/*
+ * This is hardcoded so that the consistency is maintained between SCLK and
+ * SCLK 2x.
+ */
+#define OV5640_SCLK2X_ROOT_DIV (OV5640_SCLK_ROOT_DIV / 2)
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 1 in the vendor kernels.
+ */
+#define OV5640_PCLK_ROOT_DIV			1
+#define OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS	0x00
+
+static unsigned long ov5640_compute_sys_clk(struct ov5640_dev *sensor,
+					    u8 pll_prediv, u8 pll_mult,
+					    u8 sysdiv)
+{
+	unsigned long sysclk = sensor->xclk_freq / pll_prediv * pll_mult;
+
+	/* PLL1 output cannot exceed 1GHz. */
+	if (sysclk / 1000000 > 1000)
+		return 0;
+
+	return sysclk / sysdiv;
+}
+
+static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor,
+					 unsigned long rate,
+					 u8 *pll_prediv, u8 *pll_mult,
+					 u8 *sysdiv)
+{
+	unsigned long best = ~0;
+	u8 best_sysdiv = 1, best_mult = 1;
+	u8 _sysdiv, _pll_mult;
+
+	for (_sysdiv = OV5640_SYSDIV_MIN;
+	     _sysdiv <= OV5640_SYSDIV_MAX;
+	     _sysdiv++) {
+		for (_pll_mult = OV5640_PLL_MULT_MIN;
+		     _pll_mult <= OV5640_PLL_MULT_MAX;
+		     _pll_mult++) {
+			unsigned long _rate;
+
+			/*
+			 * The PLL multiplier cannot be odd if above
+			 * 127.
+			 */
+			if (_pll_mult > 127 && (_pll_mult % 2))
+				continue;
+
+			_rate = ov5640_compute_sys_clk(sensor,
+						       OV5640_PLL_PREDIV,
+						       _pll_mult, _sysdiv);
+
+			/*
+			 * We have reached the maximum allowed PLL1 output,
+			 * increase sysdiv.
+			 */
+			if (!rate)
+				break;
+
+			/*
+			 * Prefer rates above the expected clock rate than
+			 * below, even if that means being less precise.
+			 */
+			if (_rate < rate)
+				continue;
+
+			if (abs(rate - _rate) < abs(rate - best)) {
+				best = _rate;
+				best_sysdiv = _sysdiv;
+				best_mult = _pll_mult;
+			}
+
+			if (_rate == rate)
+				goto out;
+		}
+	}
+
+out:
+	*sysdiv = best_sysdiv;
+	*pll_prediv = OV5640_PLL_PREDIV;
+	*pll_mult = best_mult;
+
+	return best;
+}
+
+/*
+ * ov5640_set_mipi_pclk() - Calculate the clock tree configuration values
+ *			    for the MIPI CSI-2 output.
+ *
+ * @rate: The requested bandwidth per lane in bytes per second.
+ *	  'Bandwidth Per Lane' is calculated as:
+ *	  bpl = HTOT * VTOT * FPS * bpp / num_lanes;
+ *
+ * This function use the requested bandwidth to calculate:
+ * - sample_rate = bpl / (bpp / num_lanes);
+ *	         = bpl / (PLL_RDIV * BIT_DIV * PCLK_DIV * MIPI_DIV / num_lanes);
+ *
+ * - mipi_sclk   = bpl / MIPI_DIV / 2; ( / 2 is for CSI-2 DDR)
+ *
+ * with these fixed parameters:
+ *	PLL_RDIV	= 2;
+ *	BIT_DIVIDER	= 2; (MIPI_BIT_MODE == 8 ? 2 : 2,5);
+ *	PCLK_DIV	= 1;
+ *
+ * The MIPI clock generation differs for modes that use the scaler and modes
+ * that do not. In case the scaler is in use, the MIPI_SCLK generates the MIPI
+ * BIT CLk, and thus:
+ *
+ * - mipi_sclk = bpl / MIPI_DIV / 2;
+ *   MIPI_DIV = 1;
+ *
+ * For modes that do not go through the scaler, the MIPI BIT CLOCK is generated
+ * from the pixel clock, and thus:
+ *
+ * - sample_rate = bpl / (bpp / num_lanes);
+ *	         = bpl / (2 * 2 * 1 * MIPI_DIV / num_lanes);
+ *		 = bpl / (4 * MIPI_DIV / num_lanes);
+ * - MIPI_DIV	 = bpp / (4 * num_lanes);
+ *
+ * FIXME: this have been tested with 16bpp and 2 lanes setup only.
+ * MIPI_DIV is fixed to value 2, but it -might- be changed according to the
+ * above formula for setups with 1 lane or image formats with different bpp.
+ *
+ * FIXME: this deviates from the sensor manual documentation which is quite
+ * thin on the MIPI clock tree generation part.
+ */
+static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor,
+				unsigned long rate)
+{
+	const struct ov5640_mode_info *mode = sensor->current_mode;
+	u8 prediv, mult, sysdiv;
+	u8 mipi_div;
+	int ret;
+
+	/*
+	 * 1280x720 is reported to use 'SUBSAMPLING' only,
+	 * but according to the sensor manual it goes through the
+	 * scaler before subsampling.
+	 */
+	if (mode->dn_mode == SCALING ||
+	   (mode->id == OV5640_MODE_720P_1280_720))
+		mipi_div = OV5640_MIPI_DIV_SCLK;
+	else
+		mipi_div = OV5640_MIPI_DIV_PCLK;
+
+	ov5640_calc_sys_clk(sensor, rate, &prediv, &mult, &sysdiv);
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
+			     0x0f, OV5640_PLL_CTRL0_MIPI_MODE_8BIT);
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
+			     0xff, sysdiv << 4 | mipi_div);
+	if (ret)
+		return ret;
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, 0xff, mult);
+	if (ret)
+		return ret;
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
+			     0x1f, OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 | prediv);
+	if (ret)
+		return ret;
+
+	return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER,
+			      0x30, OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS);
+}
+
+static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor,
+				      unsigned long rate,
+				      u8 *pll_prediv, u8 *pll_mult, u8 *sysdiv,
+				      u8 *pll_rdiv, u8 *bit_div, u8 *pclk_div)
+{
+	unsigned long _rate = rate * OV5640_PLL_ROOT_DIV * OV5640_BIT_DIV *
+				OV5640_PCLK_ROOT_DIV;
+
+	_rate = ov5640_calc_sys_clk(sensor, _rate, pll_prediv, pll_mult,
+				    sysdiv);
+	*pll_rdiv = OV5640_PLL_ROOT_DIV;
+	*bit_div = OV5640_BIT_DIV;
+	*pclk_div = OV5640_PCLK_ROOT_DIV;
+
+	return _rate / *pll_rdiv / *bit_div / *pclk_div;
+}
+
+static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor, unsigned long rate)
+{
+	u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div;
+	int ret;
+
+	ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv,
+			 &bit_div, &pclk_div);
+
+	if (bit_div == 2)
+		bit_div = 8;
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
+			     0x0f, bit_div);
+	if (ret)
+		return ret;
+
+	/*
+	 * We need to set sysdiv according to the clock, and to clear
+	 * the MIPI divider.
+	 */
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
+			     0xff, sysdiv << 4);
+	if (ret)
+		return ret;
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2,
+			     0xff, mult);
+	if (ret)
+		return ret;
+
+	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
+			     0x1f, prediv | ((pll_rdiv - 1) << 4));
+	if (ret)
+		return ret;
+
+	return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x30,
+			      (ilog2(pclk_div) << 4));
+}
+
 /* download ov5640 settings to sensor through i2c */
 static int ov5640_set_timings(struct ov5640_dev *sensor,
 			      const struct ov5640_mode_info *mode)
@@ -1638,6 +1984,7 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
 	enum ov5640_downsize_mode dn_mode, orig_dn_mode;
 	bool auto_gain = sensor->ctrls.auto_gain->val == 1;
 	bool auto_exp =  sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO;
+	unsigned long rate;
 	int ret;
 
 	dn_mode = mode->dn_mode;
@@ -1656,6 +2003,22 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
 			goto restore_auto_gain;
 	}
 
+	/*
+	 * All the formats we support have 16 bits per pixel, seems to require
+	 * the same rate than YUV, so we can just use 16 bpp all the time.
+	 */
+	rate = mode->pixel_clock * 16;
+	if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
+		rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
+		ret = ov5640_set_mipi_pclk(sensor, rate);
+	} else {
+		rate = rate / sensor->ep.bus.parallel.bus_width;
+		ret = ov5640_set_dvp_pclk(sensor, rate);
+	}
+
+	if (ret < 0)
+		return 0;
+
 	if ((dn_mode == SUBSAMPLING && orig_dn_mode == SCALING) ||
 	    (dn_mode == SCALING && orig_dn_mode == SUBSAMPLING)) {
 		/*
-- 
git-series 0.9.1

[PATCH v6 03/12] media: ov5640: Remove the clocks registers initialization

[Maxime Ripard]

Part of the hardcoded initialization sequence is to set up the proper clock
dividers. However, this is now done dynamically through proper code and as
such, the static one is now redundant.

Let's remove it.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 46 ++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 4254ac958424..588b98e2e99f 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -263,8 +263,7 @@ static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
 static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
 	{0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
 	{0x3103, 0x03, 0, 0}, {0x3017, 0x00, 0, 0}, {0x3018, 0x00, 0, 0},
-	{0x3034, 0x18, 0, 0}, {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0},
-	{0x3037, 0x13, 0, 0}, {0x3630, 0x36, 0, 0},
+	{0x3630, 0x36, 0, 0},
 	{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
 	{0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0},
 	{0x3715, 0x78, 0, 0}, {0x3717, 0x01, 0, 0}, {0x370b, 0x60, 0, 0},
@@ -347,7 +346,7 @@ static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
 };
 
 static const struct reg_value ov5640_setting_30fps_VGA_640_480[] = {
-	{0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -366,7 +365,7 @@ static const struct reg_value ov5640_setting_30fps_VGA_640_480[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_VGA_640_480[] = {
-	{0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -385,7 +384,7 @@ static const struct reg_value ov5640_setting_15fps_VGA_640_480[] = {
 };
 
 static const struct reg_value ov5640_setting_30fps_XGA_1024_768[] = {
-	{0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -401,11 +400,10 @@ static const struct reg_value ov5640_setting_30fps_XGA_1024_768[] = {
 	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
 	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x3503, 0x00, 0, 0},
-	{0x3035, 0x12, 0, 0},
 };
 
 static const struct reg_value ov5640_setting_15fps_XGA_1024_768[] = {
-	{0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -424,7 +422,7 @@ static const struct reg_value ov5640_setting_15fps_XGA_1024_768[] = {
 };
 
 static const struct reg_value ov5640_setting_30fps_QVGA_320_240[] = {
-	{0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -443,7 +441,7 @@ static const struct reg_value ov5640_setting_30fps_QVGA_320_240[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_QVGA_320_240[] = {
-	{0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -462,7 +460,7 @@ static const struct reg_value ov5640_setting_15fps_QVGA_320_240[] = {
 };
 
 static const struct reg_value ov5640_setting_30fps_QCIF_176_144[] = {
-	{0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -481,7 +479,7 @@ static const struct reg_value ov5640_setting_30fps_QCIF_176_144[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_QCIF_176_144[] = {
-	{0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -500,7 +498,7 @@ static const struct reg_value ov5640_setting_15fps_QCIF_176_144[] = {
 };
 
 static const struct reg_value ov5640_setting_30fps_NTSC_720_480[] = {
-	{0x3035, 0x12, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -519,7 +517,7 @@ static const struct reg_value ov5640_setting_30fps_NTSC_720_480[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_NTSC_720_480[] = {
-	{0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -538,7 +536,7 @@ static const struct reg_value ov5640_setting_15fps_NTSC_720_480[] = {
 };
 
 static const struct reg_value ov5640_setting_30fps_PAL_720_576[] = {
-	{0x3035, 0x12, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -557,7 +555,7 @@ static const struct reg_value ov5640_setting_30fps_PAL_720_576[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_PAL_720_576[] = {
-	{0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -577,7 +575,7 @@ static const struct reg_value ov5640_setting_15fps_PAL_720_576[] = {
 
 static const struct reg_value ov5640_setting_30fps_720P_1280_720[] = {
 	{0x3008, 0x42, 0, 0},
-	{0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x07, 0, 0},
+	{0x3c07, 0x07, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -597,7 +595,7 @@ static const struct reg_value ov5640_setting_30fps_720P_1280_720[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_720P_1280_720[] = {
-	{0x3035, 0x41, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x07, 0, 0},
+	{0x3c07, 0x07, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
 	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -617,7 +615,7 @@ static const struct reg_value ov5640_setting_15fps_720P_1280_720[] = {
 
 static const struct reg_value ov5640_setting_30fps_1080P_1920_1080[] = {
 	{0x3008, 0x42, 0, 0},
-	{0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x11, 0, 0},
 	{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -632,8 +630,8 @@ static const struct reg_value ov5640_setting_30fps_1080P_1920_1080[] = {
 	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
 	{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, {0x4713, 0x03, 0, 0},
 	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0}, {0x3035, 0x11, 0, 0},
-	{0x3036, 0x54, 0, 0}, {0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
+	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0},
+	{0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3800, 0x01, 0, 0}, {0x3801, 0x50, 0, 0}, {0x3802, 0x01, 0, 0},
 	{0x3803, 0xb2, 0, 0}, {0x3804, 0x08, 0, 0}, {0x3805, 0xef, 0, 0},
@@ -650,7 +648,7 @@ static const struct reg_value ov5640_setting_30fps_1080P_1920_1080[] = {
 
 static const struct reg_value ov5640_setting_15fps_1080P_1920_1080[] = {
 	{0x3008, 0x42, 0, 0},
-	{0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x11, 0, 0},
 	{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -665,8 +663,8 @@ static const struct reg_value ov5640_setting_15fps_1080P_1920_1080[] = {
 	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
 	{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, {0x4713, 0x03, 0, 0},
 	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0}, {0x3035, 0x21, 0, 0},
-	{0x3036, 0x54, 0, 1}, {0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
+	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0},
+	{0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3800, 0x01, 0, 0}, {0x3801, 0x50, 0, 0}, {0x3802, 0x01, 0, 0},
 	{0x3803, 0xb2, 0, 0}, {0x3804, 0x08, 0, 0}, {0x3805, 0xef, 0, 0},
@@ -681,7 +679,7 @@ static const struct reg_value ov5640_setting_15fps_1080P_1920_1080[] = {
 };
 
 static const struct reg_value ov5640_setting_15fps_QSXGA_2592_1944[] = {
-	{0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x08, 0, 0},
+	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x11, 0, 0},
 	{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-- 
git-series 0.9.1

[PATCH v6 04/12] media: ov5640: Remove redundant defines

[Maxime Ripard]

The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT
defines represent exactly the same setup, and are at the same value, than
the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and
OV5640_SCLK_ROOT_DIV.

Remove them.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 588b98e2e99f..7c18120aabd1 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -95,9 +95,6 @@
 #define OV5640_REG_SDE_CTRL5		0x5585
 #define OV5640_REG_AVG_READOUT		0x56a1
 
-#define OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT	1
-#define OV5640_SCLK_ROOT_DIVIDER_DEFAULT	2
-
 enum ov5640_mode_id {
 	OV5640_MODE_QCIF_176_144 = 0,
 	OV5640_MODE_QVGA_320_240,
@@ -2086,8 +2083,8 @@ static int ov5640_restore_mode(struct ov5640_dev *sensor)
 	sensor->last_mode = &ov5640_mode_init_data;
 
 	ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
-			     (ilog2(OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT) << 2) |
-			     ilog2(OV5640_SCLK_ROOT_DIVIDER_DEFAULT));
+			     (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
+			     ilog2(OV5640_SCLK_ROOT_DIV));
 	if (ret)
 		return ret;
 
-- 
git-series 0.9.1

[PATCH v6 05/12] media: ov5640: Remove redundant register setup

[Maxime Ripard]

The MIPI divider is also cleared as part of the clock setup sequence, so we
can remove that code.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 7c18120aabd1..e36b04912dcc 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1404,16 +1404,6 @@ static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
 
 	if (on) {
 		/*
-		 * reset MIPI PCLK/SERCLK divider
-		 *
-		 * SC PLL CONTRL1 0
-		 * - [3..0]:	MIPI PCLK/SERCLK divider
-		 */
-		ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, 0x0f, 0);
-		if (ret)
-			return ret;
-
-		/*
 		 * configure parallel port control lines polarity
 		 *
 		 * POLARITY CTRL0
-- 
git-series 0.9.1

[PATCH v6 06/12] media: ov5640: Compute the clock rate at runtime

[Maxime Ripard]

The clock rate, while hardcoded until now, is actually a function of the
resolution, framerate and bytes per pixel. Now that we have an algorithm to
adjust our clock rate, we can select it dynamically when we change the
mode.

This changes a bit the clock rate being used, with the following effect:

+------+------+------+------+-----+-----------------+----------------+-----------+
| Hact | Vact | Htot | Vtot | FPS | Hardcoded clock | Computed clock | Deviation |
+------+------+------+------+-----+-----------------+----------------+-----------+
|  640 |  480 | 1896 | 1080 |  15 |        56000000 |       61430400 | 8.84 %    |
|  640 |  480 | 1896 | 1080 |  30 |       112000000 |      122860800 | 8.84 %    |
| 1024 |  768 | 1896 | 1080 |  15 |        56000000 |       61430400 | 8.84 %    |
| 1024 |  768 | 1896 | 1080 |  30 |       112000000 |      122860800 | 8.84 %    |
|  320 |  240 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  320 |  240 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
|  176 |  144 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  176 |  144 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
|  720 |  480 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  720 |  480 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
|  720 |  576 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  720 |  576 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
| 1280 |  720 | 1892 |  740 |  15 |        42000000 |       42002400 | 0.01 %    |
| 1280 |  720 | 1892 |  740 |  30 |        84000000 |       84004800 | 0.01 %    |
| 1920 | 1080 | 2500 | 1120 |  15 |        84000000 |       84000000 | 0.00 %    |
| 1920 | 1080 | 2500 | 1120 |  30 |       168000000 |      168000000 | 0.00 %    |
| 2592 | 1944 | 2844 | 1944 |  15 |        84000000 |      165862080 | 49.36 %   |
+------+------+------+------+-----+-----------------+----------------+-----------+

Only the 640x480, 1024x768 and 2592x1944 modes are significantly affected
by the new formula.

In this case, 640x480 and 1024x768 are actually fixed by this change.
Indeed, the sensor was sending data at, for example, 27.33fps instead of
30fps. This is -9%, which is roughly what we're seeing in the array.
Testing these modes with the new clock setup actually fix that error, and
data are now sent at around 30fps.

2592x1944, on the other hand, is probably due to the fact that this mode
can only be used using MIPI-CSI2, in a two lane mode, and never really
tested with a DVP bus.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index e36b04912dcc..536261618d0d 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1992,7 +1992,8 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
 	 * All the formats we support have 16 bits per pixel, seems to require
 	 * the same rate than YUV, so we can just use 16 bpp all the time.
 	 */
-	rate = mode->pixel_clock * 16;
+	rate = mode->vtot * mode->htot * 16;
+	rate *= ov5640_framerates[sensor->current_fr];
 	if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
 		rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
 		ret = ov5640_set_mipi_pclk(sensor, rate);
-- 
git-series 0.9.1

[PATCH v6 07/12] media: ov5640: Remove pixel clock rates

[Maxime Ripard]

The pixel clock rates were introduced to report the initially static clock
rate.

Since this is now handled dynamically, we can remove them entirely.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 536261618d0d..06afe7572f0e 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -173,7 +173,6 @@ struct ov5640_mode_info {
 	u32 htot;
 	u32 vact;
 	u32 vtot;
-	u32 pixel_clock;
 	const struct reg_value *reg_data;
 	u32 reg_data_size;
 };
@@ -697,7 +696,6 @@ static const struct reg_value ov5640_setting_15fps_QSXGA_2592_1944[] = {
 /* power-on sensor init reg table */
 static const struct ov5640_mode_info ov5640_mode_init_data = {
 	0, SUBSAMPLING, 640, 1896, 480, 984,
-	56000000,
 	ov5640_init_setting_30fps_VGA,
 	ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
 };
@@ -707,91 +705,74 @@ ov5640_mode_data[OV5640_NUM_FRAMERATES][OV5640_NUM_MODES] = {
 	{
 		{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
 		 176, 1896, 144, 984,
-		 28000000,
 		 ov5640_setting_15fps_QCIF_176_144,
 		 ARRAY_SIZE(ov5640_setting_15fps_QCIF_176_144)},
 		{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
 		 320, 1896, 240, 984,
-		 28000000,
 		 ov5640_setting_15fps_QVGA_320_240,
 		 ARRAY_SIZE(ov5640_setting_15fps_QVGA_320_240)},
 		{OV5640_MODE_VGA_640_480, SUBSAMPLING,
 		 640, 1896, 480, 1080,
-		 28000000,
 		 ov5640_setting_15fps_VGA_640_480,
 		 ARRAY_SIZE(ov5640_setting_15fps_VGA_640_480)},
 		{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
 		 720, 1896, 480, 984,
-		 28000000,
 		 ov5640_setting_15fps_NTSC_720_480,
 		 ARRAY_SIZE(ov5640_setting_15fps_NTSC_720_480)},
 		{OV5640_MODE_PAL_720_576, SUBSAMPLING,
 		 720, 1896, 576, 984,
-		 28000000,
 		 ov5640_setting_15fps_PAL_720_576,
 		 ARRAY_SIZE(ov5640_setting_15fps_PAL_720_576)},
 		{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
 		 1024, 1896, 768, 1080,
-		 28000000,
 		 ov5640_setting_15fps_XGA_1024_768,
 		 ARRAY_SIZE(ov5640_setting_15fps_XGA_1024_768)},
 		{OV5640_MODE_720P_1280_720, SUBSAMPLING,
 		 1280, 1892, 720, 740,
-		 21000000,
 		 ov5640_setting_15fps_720P_1280_720,
 		 ARRAY_SIZE(ov5640_setting_15fps_720P_1280_720)},
 		{OV5640_MODE_1080P_1920_1080, SCALING,
 		 1920, 2500, 1080, 1120,
-		 42000000,
 		 ov5640_setting_15fps_1080P_1920_1080,
 		 ARRAY_SIZE(ov5640_setting_15fps_1080P_1920_1080)},
 		{OV5640_MODE_QSXGA_2592_1944, SCALING,
 		 2592, 2844, 1944, 1968,
-		 84000000,
 		 ov5640_setting_15fps_QSXGA_2592_1944,
 		 ARRAY_SIZE(ov5640_setting_15fps_QSXGA_2592_1944)},
 	}, {
 		{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
 		 176, 1896, 144, 984,
-		 56000000,
 		 ov5640_setting_30fps_QCIF_176_144,
 		 ARRAY_SIZE(ov5640_setting_30fps_QCIF_176_144)},
 		{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
 		 320, 1896, 240, 984,
-		 56000000,
 		 ov5640_setting_30fps_QVGA_320_240,
 		 ARRAY_SIZE(ov5640_setting_30fps_QVGA_320_240)},
 		{OV5640_MODE_VGA_640_480, SUBSAMPLING,
 		 640, 1896, 480, 1080,
-		 56000000,
 		 ov5640_setting_30fps_VGA_640_480,
 		 ARRAY_SIZE(ov5640_setting_30fps_VGA_640_480)},
 		{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
 		 720, 1896, 480, 984,
-		 56000000,
 		 ov5640_setting_30fps_NTSC_720_480,
 		 ARRAY_SIZE(ov5640_setting_30fps_NTSC_720_480)},
 		{OV5640_MODE_PAL_720_576, SUBSAMPLING,
 		 720, 1896, 576, 984,
-		 56000000,
 		 ov5640_setting_30fps_PAL_720_576,
 		 ARRAY_SIZE(ov5640_setting_30fps_PAL_720_576)},
 		{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
 		 1024, 1896, 768, 1080,
-		 56000000,
 		 ov5640_setting_30fps_XGA_1024_768,
 		 ARRAY_SIZE(ov5640_setting_30fps_XGA_1024_768)},
 		{OV5640_MODE_720P_1280_720, SUBSAMPLING,
 		 1280, 1892, 720, 740,
-		 42000000,
 		 ov5640_setting_30fps_720P_1280_720,
 		 ARRAY_SIZE(ov5640_setting_30fps_720P_1280_720)},
 		{OV5640_MODE_1080P_1920_1080, SCALING,
 		 1920, 2500, 1080, 1120,
-		 84000000,
 		 ov5640_setting_30fps_1080P_1920_1080,
 		 ARRAY_SIZE(ov5640_setting_30fps_1080P_1920_1080)},
-		{OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, 0, NULL, 0},
+		{OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, NULL, 0},
 	},
 };
 
-- 
git-series 0.9.1

[PATCH v6 08/12] media: ov5640: Enhance FPS handling

[Maxime Ripard]

Now that we have moved the clock generation logic out of the bytes array,
these arrays are identical between the 15fps and 30fps variants.

Remove the duplicate entries, and convert the code accordingly.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 306 ++++++--------------------------------
 1 file changed, 51 insertions(+), 255 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 06afe7572f0e..abca08d669be 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -341,83 +341,7 @@ static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
 	{0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300},
 };
 
-static const struct reg_value ov5640_setting_30fps_VGA_640_480[] = {
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x0e, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x3503, 0x00, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_VGA_640_480[] = {
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_30fps_XGA_1024_768[] = {
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x0e, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x3503, 0x00, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_XGA_1024_768[] = {
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_30fps_QVGA_320_240[] = {
+static const struct reg_value ov5640_setting_VGA_640_480[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -436,7 +360,7 @@ static const struct reg_value ov5640_setting_30fps_QVGA_320_240[] = {
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_15fps_QVGA_320_240[] = {
+static const struct reg_value ov5640_setting_XGA_1024_768[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -455,7 +379,7 @@ static const struct reg_value ov5640_setting_15fps_QVGA_320_240[] = {
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_30fps_QCIF_176_144[] = {
+static const struct reg_value ov5640_setting_QVGA_320_240[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -474,7 +398,7 @@ static const struct reg_value ov5640_setting_30fps_QCIF_176_144[] = {
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_15fps_QCIF_176_144[] = {
+static const struct reg_value ov5640_setting_QCIF_176_144[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -493,26 +417,7 @@ static const struct reg_value ov5640_setting_15fps_QCIF_176_144[] = {
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_30fps_NTSC_720_480[] = {
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x3c, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_NTSC_720_480[] = {
+static const struct reg_value ov5640_setting_NTSC_720_480[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -531,26 +436,7 @@ static const struct reg_value ov5640_setting_15fps_NTSC_720_480[] = {
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_30fps_PAL_720_576[] = {
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x38, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_PAL_720_576[] = {
+static const struct reg_value ov5640_setting_PAL_720_576[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -569,28 +455,7 @@ static const struct reg_value ov5640_setting_15fps_PAL_720_576[] = {
 	{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_30fps_720P_1280_720[] = {
-	{0x3008, 0x42, 0, 0},
-	{0x3c07, 0x07, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x31, 0, 0},
-	{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0xfa, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x06, 0, 0}, {0x3807, 0xa9, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
-	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x02, 0, 0},
-	{0x3a03, 0xe4, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0xbc, 0, 0},
-	{0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x72, 0, 0}, {0x3a0e, 0x01, 0, 0},
-	{0x3a0d, 0x02, 0, 0}, {0x3a14, 0x02, 0, 0}, {0x3a15, 0xe4, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x02, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0},
-	{0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0}, {0x4005, 0x1a, 0, 0},
-	{0x3008, 0x02, 0, 0}, {0x3503, 0,    0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_720P_1280_720[] = {
+static const struct reg_value ov5640_setting_720P_1280_720[] = {
 	{0x3c07, 0x07, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x31, 0, 0},
@@ -609,40 +474,7 @@ static const struct reg_value ov5640_setting_15fps_720P_1280_720[] = {
 	{0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_30fps_1080P_1920_1080[] = {
-	{0x3008, 0x42, 0, 0},
-	{0x3c07, 0x08, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3814, 0x11, 0, 0},
-	{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
-	{0x3802, 0x00, 0, 0}, {0x3803, 0x00, 0, 0}, {0x3804, 0x0a, 0, 0},
-	{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9f, 0, 0},
-	{0x3810, 0x00, 0, 0},
-	{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
-	{0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0},
-	{0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0},
-	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
-	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
-	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
-	{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, {0x4713, 0x03, 0, 0},
-	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
-	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0},
-	{0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
-	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
-	{0x3800, 0x01, 0, 0}, {0x3801, 0x50, 0, 0}, {0x3802, 0x01, 0, 0},
-	{0x3803, 0xb2, 0, 0}, {0x3804, 0x08, 0, 0}, {0x3805, 0xef, 0, 0},
-	{0x3806, 0x05, 0, 0}, {0x3807, 0xf1, 0, 0},
-	{0x3612, 0x2b, 0, 0}, {0x3708, 0x64, 0, 0},
-	{0x3a02, 0x04, 0, 0}, {0x3a03, 0x60, 0, 0}, {0x3a08, 0x01, 0, 0},
-	{0x3a09, 0x50, 0, 0}, {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x18, 0, 0},
-	{0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
-	{0x3a15, 0x60, 0, 0}, {0x4713, 0x02, 0, 0}, {0x4407, 0x04, 0, 0},
-	{0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
-	{0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0},
-	{0x3503, 0, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_1080P_1920_1080[] = {
+static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
 	{0x3008, 0x42, 0, 0},
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
@@ -674,7 +506,7 @@ static const struct reg_value ov5640_setting_15fps_1080P_1920_1080[] = {
 	{0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3503, 0, 0, 0},
 };
 
-static const struct reg_value ov5640_setting_15fps_QSXGA_2592_1944[] = {
+static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x11, 0, 0},
@@ -701,79 +533,43 @@ static const struct ov5640_mode_info ov5640_mode_init_data = {
 };
 
 static const struct ov5640_mode_info
-ov5640_mode_data[OV5640_NUM_FRAMERATES][OV5640_NUM_MODES] = {
-	{
-		{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
-		 176, 1896, 144, 984,
-		 ov5640_setting_15fps_QCIF_176_144,
-		 ARRAY_SIZE(ov5640_setting_15fps_QCIF_176_144)},
-		{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
-		 320, 1896, 240, 984,
-		 ov5640_setting_15fps_QVGA_320_240,
-		 ARRAY_SIZE(ov5640_setting_15fps_QVGA_320_240)},
-		{OV5640_MODE_VGA_640_480, SUBSAMPLING,
-		 640, 1896, 480, 1080,
-		 ov5640_setting_15fps_VGA_640_480,
-		 ARRAY_SIZE(ov5640_setting_15fps_VGA_640_480)},
-		{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
-		 720, 1896, 480, 984,
-		 ov5640_setting_15fps_NTSC_720_480,
-		 ARRAY_SIZE(ov5640_setting_15fps_NTSC_720_480)},
-		{OV5640_MODE_PAL_720_576, SUBSAMPLING,
-		 720, 1896, 576, 984,
-		 ov5640_setting_15fps_PAL_720_576,
-		 ARRAY_SIZE(ov5640_setting_15fps_PAL_720_576)},
-		{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
-		 1024, 1896, 768, 1080,
-		 ov5640_setting_15fps_XGA_1024_768,
-		 ARRAY_SIZE(ov5640_setting_15fps_XGA_1024_768)},
-		{OV5640_MODE_720P_1280_720, SUBSAMPLING,
-		 1280, 1892, 720, 740,
-		 ov5640_setting_15fps_720P_1280_720,
-		 ARRAY_SIZE(ov5640_setting_15fps_720P_1280_720)},
-		{OV5640_MODE_1080P_1920_1080, SCALING,
-		 1920, 2500, 1080, 1120,
-		 ov5640_setting_15fps_1080P_1920_1080,
-		 ARRAY_SIZE(ov5640_setting_15fps_1080P_1920_1080)},
-		{OV5640_MODE_QSXGA_2592_1944, SCALING,
-		 2592, 2844, 1944, 1968,
-		 ov5640_setting_15fps_QSXGA_2592_1944,
-		 ARRAY_SIZE(ov5640_setting_15fps_QSXGA_2592_1944)},
-	}, {
-		{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
-		 176, 1896, 144, 984,
-		 ov5640_setting_30fps_QCIF_176_144,
-		 ARRAY_SIZE(ov5640_setting_30fps_QCIF_176_144)},
-		{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
-		 320, 1896, 240, 984,
-		 ov5640_setting_30fps_QVGA_320_240,
-		 ARRAY_SIZE(ov5640_setting_30fps_QVGA_320_240)},
-		{OV5640_MODE_VGA_640_480, SUBSAMPLING,
-		 640, 1896, 480, 1080,
-		 ov5640_setting_30fps_VGA_640_480,
-		 ARRAY_SIZE(ov5640_setting_30fps_VGA_640_480)},
-		{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
-		 720, 1896, 480, 984,
-		 ov5640_setting_30fps_NTSC_720_480,
-		 ARRAY_SIZE(ov5640_setting_30fps_NTSC_720_480)},
-		{OV5640_MODE_PAL_720_576, SUBSAMPLING,
-		 720, 1896, 576, 984,
-		 ov5640_setting_30fps_PAL_720_576,
-		 ARRAY_SIZE(ov5640_setting_30fps_PAL_720_576)},
-		{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
-		 1024, 1896, 768, 1080,
-		 ov5640_setting_30fps_XGA_1024_768,
-		 ARRAY_SIZE(ov5640_setting_30fps_XGA_1024_768)},
-		{OV5640_MODE_720P_1280_720, SUBSAMPLING,
-		 1280, 1892, 720, 740,
-		 ov5640_setting_30fps_720P_1280_720,
-		 ARRAY_SIZE(ov5640_setting_30fps_720P_1280_720)},
-		{OV5640_MODE_1080P_1920_1080, SCALING,
-		 1920, 2500, 1080, 1120,
-		 ov5640_setting_30fps_1080P_1920_1080,
-		 ARRAY_SIZE(ov5640_setting_30fps_1080P_1920_1080)},
-		{OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, NULL, 0},
-	},
+ov5640_mode_data[OV5640_NUM_MODES] = {
+	{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
+	 176, 1896, 144, 984,
+	 ov5640_setting_QCIF_176_144,
+	 ARRAY_SIZE(ov5640_setting_QCIF_176_144)},
+	{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
+	 320, 1896, 240, 984,
+	 ov5640_setting_QVGA_320_240,
+	 ARRAY_SIZE(ov5640_setting_QVGA_320_240)},
+	{OV5640_MODE_VGA_640_480, SUBSAMPLING,
+	 640, 1896, 480, 1080,
+	 ov5640_setting_VGA_640_480,
+	 ARRAY_SIZE(ov5640_setting_VGA_640_480)},
+	{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
+	 720, 1896, 480, 984,
+	 ov5640_setting_NTSC_720_480,
+	 ARRAY_SIZE(ov5640_setting_NTSC_720_480)},
+	{OV5640_MODE_PAL_720_576, SUBSAMPLING,
+	 720, 1896, 576, 984,
+	 ov5640_setting_PAL_720_576,
+	 ARRAY_SIZE(ov5640_setting_PAL_720_576)},
+	{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
+	 1024, 1896, 768, 1080,
+	 ov5640_setting_XGA_1024_768,
+	 ARRAY_SIZE(ov5640_setting_XGA_1024_768)},
+	{OV5640_MODE_720P_1280_720, SUBSAMPLING,
+	 1280, 1892, 720, 740,
+	 ov5640_setting_720P_1280_720,
+	 ARRAY_SIZE(ov5640_setting_720P_1280_720)},
+	{OV5640_MODE_1080P_1920_1080, SCALING,
+	 1920, 2500, 1080, 1120,
+	 ov5640_setting_1080P_1920_1080,
+	 ARRAY_SIZE(ov5640_setting_1080P_1920_1080)},
+	{OV5640_MODE_QSXGA_2592_1944, SCALING,
+	 2592, 2844, 1944, 1968,
+	 ov5640_setting_QSXGA_2592_1944,
+	 ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944)},
 };
 
 static int ov5640_init_slave_id(struct ov5640_dev *sensor)
@@ -1757,8 +1553,8 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
 {
 	const struct ov5640_mode_info *mode;
 
-	mode = v4l2_find_nearest_size(ov5640_mode_data[fr],
-				      ARRAY_SIZE(ov5640_mode_data[fr]),
+	mode = v4l2_find_nearest_size(ov5640_mode_data,
+				      ARRAY_SIZE(ov5640_mode_data),
 				      hact, vact,
 				      width, height);
 
@@ -2832,10 +2628,10 @@ static int ov5640_enum_frame_size(struct v4l2_subdev *sd,
 		return -EINVAL;
 
 	fse->min_width =
-		ov5640_mode_data[0][fse->index].hact;
+		ov5640_mode_data[fse->index].hact;
 	fse->max_width = fse->min_width;
 	fse->min_height =
-		ov5640_mode_data[0][fse->index].vact;
+		ov5640_mode_data[fse->index].vact;
 	fse->max_height = fse->min_height;
 
 	return 0;
@@ -3069,7 +2865,7 @@ static int ov5640_probe(struct i2c_client *client,
 	sensor->frame_interval.denominator = ov5640_framerates[OV5640_30_FPS];
 	sensor->current_fr = OV5640_30_FPS;
 	sensor->current_mode =
-		&ov5640_mode_data[OV5640_30_FPS][OV5640_MODE_VGA_640_480];
+		&ov5640_mode_data[OV5640_MODE_VGA_640_480];
 	sensor->last_mode = sensor->current_mode;
 
 	sensor->ae_target = 52;
-- 
git-series 0.9.1

[PATCH v6 09/12] media: ov5640: Make the return rate type more explicit

[Maxime Ripard]

In the ov5640_try_frame_interval function, the ret variable actually holds
the frame rate index to use, which is represented by the enum
ov5640_frame_rate in the driver.

Make it more obvious.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index abca08d669be..6cdf5ee0e4fa 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2052,8 +2052,8 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
 				     u32 width, u32 height)
 {
 	const struct ov5640_mode_info *mode;
+	enum ov5640_frame_rate rate = OV5640_30_FPS;
 	u32 minfps, maxfps, fps;
-	int ret;
 
 	minfps = ov5640_framerates[OV5640_15_FPS];
 	maxfps = ov5640_framerates[OV5640_30_FPS];
@@ -2076,10 +2076,10 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
 	else
 		fi->denominator = minfps;
 
-	ret = (fi->denominator == minfps) ? OV5640_15_FPS : OV5640_30_FPS;
+	rate = (fi->denominator == minfps) ? OV5640_15_FPS : OV5640_30_FPS;
 
-	mode = ov5640_find_mode(sensor, ret, width, height, false);
-	return mode ? ret : -EINVAL;
+	mode = ov5640_find_mode(sensor, rate, width, height, false);
+	return mode ? rate : -EINVAL;
 }
 
 static int ov5640_get_fmt(struct v4l2_subdev *sd,
-- 
git-series 0.9.1

[PATCH v6 10/12] media: ov5640: Make the FPS clamping / rounding more extendable

[Maxime Ripard]

The current code uses an algorithm to clamp the FPS values and round them
to the closest supported one that isn't really allows to be extended to
more than two values.

Rework it a bit to make it much easier to extend the amount of FPS options
we support.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 6cdf5ee0e4fa..93fa072135ad 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2053,7 +2053,8 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
 {
 	const struct ov5640_mode_info *mode;
 	enum ov5640_frame_rate rate = OV5640_30_FPS;
-	u32 minfps, maxfps, fps;
+	int minfps, maxfps, best_fps, fps;
+	int i;
 
 	minfps = ov5640_framerates[OV5640_15_FPS];
 	maxfps = ov5640_framerates[OV5640_30_FPS];
@@ -2064,19 +2065,21 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
 		return OV5640_30_FPS;
 	}
 
-	fps = DIV_ROUND_CLOSEST(fi->denominator, fi->numerator);
+	fps = clamp_val(DIV_ROUND_CLOSEST(fi->denominator, fi->numerator),
+			minfps, maxfps);
 
-	fi->numerator = 1;
-	if (fps > maxfps)
-		fi->denominator = maxfps;
-	else if (fps < minfps)
-		fi->denominator = minfps;
-	else if (2 * fps >= 2 * minfps + (maxfps - minfps))
-		fi->denominator = maxfps;
-	else
-		fi->denominator = minfps;
+	best_fps = minfps;
+	for (i = 0; i < ARRAY_SIZE(ov5640_framerates); i++) {
+		int curr_fps = ov5640_framerates[i];
 
-	rate = (fi->denominator == minfps) ? OV5640_15_FPS : OV5640_30_FPS;
+		if (abs(curr_fps - fps) < abs(best_fps - fps)) {
+			best_fps = curr_fps;
+			rate = i;
+		}
+	}
+
+	fi->numerator = 1;
+	fi->denominator = best_fps;
 
 	mode = ov5640_find_mode(sensor, rate, width, height, false);
 	return mode ? rate : -EINVAL;
-- 
git-series 0.9.1

[PATCH v6 11/12] media: ov5640: Add 60 fps support

[Maxime Ripard]

Now that we have everything in place to compute the clock rate at runtime,
we can enable the 60fps framerate for the mode we tested it with.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 93fa072135ad..6391ea4f712c 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -111,6 +111,7 @@ enum ov5640_mode_id {
 enum ov5640_frame_rate {
 	OV5640_15_FPS = 0,
 	OV5640_30_FPS,
+	OV5640_60_FPS,
 	OV5640_NUM_FRAMERATES,
 };
 
@@ -139,6 +140,7 @@ MODULE_PARM_DESC(virtual_channel,
 static const int ov5640_framerates[] = {
 	[OV5640_15_FPS] = 15,
 	[OV5640_30_FPS] = 30,
+	[OV5640_60_FPS] = 60,
 };
 
 /* regulator supplies */
@@ -1562,6 +1564,11 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
 	    (!nearest && (mode->hact != width || mode->vact != height)))
 		return NULL;
 
+	/* Only 640x480 can operate at 60fps (for now) */
+	if (fr == OV5640_60_FPS &&
+	    !(mode->hact == 640 && mode->vact == 480))
+		return NULL;
+
 	return mode;
 }
 
@@ -2057,12 +2064,13 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
 	int i;
 
 	minfps = ov5640_framerates[OV5640_15_FPS];
-	maxfps = ov5640_framerates[OV5640_30_FPS];
+	maxfps = ov5640_framerates[OV5640_60_FPS];
 
 	if (fi->numerator == 0) {
 		fi->denominator = maxfps;
 		fi->numerator = 1;
-		return OV5640_30_FPS;
+		rate = OV5640_60_FPS;
+		goto find_mode;
 	}
 
 	fps = clamp_val(DIV_ROUND_CLOSEST(fi->denominator, fi->numerator),
@@ -2081,6 +2089,7 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
 	fi->numerator = 1;
 	fi->denominator = best_fps;
 
+find_mode:
 	mode = ov5640_find_mode(sensor, rate, width, height, false);
 	return mode ? rate : -EINVAL;
 }
@@ -2699,8 +2708,11 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
 
 	frame_rate = ov5640_try_frame_interval(sensor, &fi->interval,
 					       mode->hact, mode->vact);
-	if (frame_rate < 0)
-		frame_rate = OV5640_15_FPS;
+	if (frame_rate < 0) {
+		/* Always return a valid frame interval value */
+		fi->interval = sensor->frame_interval;
+		goto out;
+	}
 
 	mode = ov5640_find_mode(sensor, frame_rate, mode->hact,
 				mode->vact, true);
-- 
git-series 0.9.1

[PATCH v6 12/12] media: ov5640: Remove duplicate auto-exposure setup

[Maxime Ripard]

The autoexposure setup in the 1080p init array is redundant with the
default value of the sensor.

Remove it.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
---
 drivers/media/i2c/ov5640.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 6391ea4f712c..bef3f3aae0ed 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -505,7 +505,7 @@ static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
 	{0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
 	{0x3a15, 0x60, 0, 0}, {0x4713, 0x02, 0, 0}, {0x4407, 0x04, 0, 0},
 	{0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
-	{0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3503, 0, 0, 0},
+	{0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0},
 };
 
 static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
-- 
git-series 0.9.1

Re: [PATCH v6 01/12] media: ov5640: Fix set format regression

[Adam Ford]

On Mon, Dec 3, 2018 at 2:45 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> From: Jacopo Mondi <jacopo+renesas@jmondi.org>
>
> The set_fmt operations updates the sensor format only when the image format
> is changed. When only the image sizes gets changed, the format do not get
> updated causing the sensor to always report the one that was previously in
> use.
>
> Without this patch, updating frame size only fails:
>   [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ...]
>
> With this patch applied:
>   [fmt:UYVY8_2X8/1024x768@1/30 field:none colorspace:srgb xfer:srgb ...]
>
> Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame
> interval is unchanged")
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Tested-by: Adam Ford <aford173@gmail.com> #imx6 w/ CSI2 interface on
4.19.6 and 4.20-RC5
> ---
>  drivers/media/i2c/ov5640.c | 17 ++++++++---------
>  1 file changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index a91d91715d00..807bd0e386a4 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -2021,6 +2021,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>         struct ov5640_dev *sensor = to_ov5640_dev(sd);
>         const struct ov5640_mode_info *new_mode;
>         struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> +       struct v4l2_mbus_framefmt *fmt;
>         int ret;
>
>         if (format->pad != 0)
> @@ -2038,22 +2039,20 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>         if (ret)
>                 goto out;
>
> -       if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> -               struct v4l2_mbus_framefmt *fmt =
> -                       v4l2_subdev_get_try_format(sd, cfg, 0);
> +       if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> +               fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> +       else
> +               fmt = &sensor->fmt;
>
> -               *fmt = *mbus_fmt;
> -               goto out;
> -       }
> +       *fmt = *mbus_fmt;
>
>         if (new_mode != sensor->current_mode) {
>                 sensor->current_mode = new_mode;
>                 sensor->pending_mode_change = true;
>         }
> -       if (mbus_fmt->code != sensor->fmt.code) {
> -               sensor->fmt = *mbus_fmt;
> +       if (mbus_fmt->code != sensor->fmt.code)
>                 sensor->pending_fmt_change = true;
> -       }
> +
>  out:
>         mutex_unlock(&sensor->lock);
>         return ret;
> --
> git-series 0.9.1

Re: [PATCH v6 00/12] media: ov5640: Misc cleanup and improvements

[Jagan Teki]

On Mon, Dec 3, 2018 at 2:14 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> Hi,
>
> Here is a "small" series that mostly cleans up the ov5640 driver code,
> slowly getting rid of the big data array for more understandable code
> (hopefully).
>
> The biggest addition would be the clock rate computation at runtime,
> instead of relying on those arrays to setup the clock tree
> properly. As a side effect, it fixes the framerate that was off by
> around 10% on the smaller resolutions, and we now support 60fps.
>
> This also introduces a bunch of new features.
>
> Let me know what you think,
> Maxime
>
> Changes from v5:
>   - Squashed Jacopo patches fixing MIPI-CSI
>
> Changes from v4:
>   - Squashed Jacopo patches fixing the MIPI-CSI case
>   - Prefer clock rates superior to the ideal clock rate, even if it
>     means having a less precise one.
>   - Fix the JPEG case according to Hugues suggestions
>   - Rebased on 4.20
>
> Changes from v3:
>   - Rebased on current Sakari tree
>   - Fixed an error when changing only the framerate
>
> Changes from v2:
>   - Rebased on latest Sakari PR
>   - Fixed the issues reported by Hugues: improper FPS returned for
>     formats, improper rounding of the FPS, some with his suggestions,
>     some by simplifying the logic.
>   - Expanded the clock tree comments based on the feedback from Samuel
>     Bobrowicz and Loic Poulain
>   - Merged some of the changes made by Samuel Bobrowicz to fix the
>     MIPI rate computation, fix the call sites of the
>     ov5640_set_timings function, the auto-exposure calculation call,
>     etc.
>   - Split the patches into smaller ones in order to make it more
>     readable (hopefully)
>
> Changes from v1:
>   - Integrated Hugues' suggestions to fix v4l2-compliance
>   - Fixed the bus width with JPEG
>   - Dropped the clock rate calculation loops for something simpler as
>     suggested by Sakari
>   - Cache the exposure value instead of using the control value
>   - Rebased on top of 4.17
>
> Jacopo Mondi (1):
>   media: ov5640: Fix set format regression
>
> Maxime Ripard (11):
>   media: ov5640: Adjust the clock based on the expected rate
>   media: ov5640: Remove the clocks registers initialization
>   media: ov5640: Remove redundant defines
>   media: ov5640: Remove redundant register setup
>   media: ov5640: Compute the clock rate at runtime
>   media: ov5640: Remove pixel clock rates
>   media: ov5640: Enhance FPS handling
>   media: ov5640: Make the return rate type more explicit
>   media: ov5640: Make the FPS clamping / rounding more extendable
>   media: ov5640: Add 60 fps support
>   media: ov5640: Remove duplicate auto-exposure setup

Tested 320x240@30, 640x480@30, 640x480@60, 1280x720@30 with UYVY8_2X8
and YUYV8_2X8 formats.

Tested-by: Jagan Teki <jagan@amarulasolutions.com> # a64-amarula-relic

Re: [PATCH v6 09/12] media: ov5640: Make the return rate type more explicit

[Jagan Teki]

On Mon, Dec 3, 2018 at 2:14 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> In the ov5640_try_frame_interval function, the ret variable actually holds
> the frame rate index to use, which is represented by the enum
> ov5640_frame_rate in the driver.
>
> Make it more obvious.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
> ---
>  drivers/media/i2c/ov5640.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index abca08d669be..6cdf5ee0e4fa 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -2052,8 +2052,8 @@ static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
>                                      u32 width, u32 height)
>  {
>         const struct ov5640_mode_info *mode;
> +       enum ov5640_frame_rate rate = OV5640_30_FPS;

This is breaking setting 15fps via media-ctl.

Initializing rate to OV5640_15_FPS will satisfy all fps rate changes.