linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Wen Su <Wen.Su@mediatek.com>
To: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, wen.su@mediatek.com,
	wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] dt-bindings: regulator: Add document for MT6359 regulator
Date: Thu, 6 Feb 2020 11:06:48 +0800	[thread overview]
Message-ID: <1580958411-2478-2-git-send-email-Wen.Su@mediatek.com> (raw)
In-Reply-To: <1580958411-2478-1-git-send-email-Wen.Su@mediatek.com>

From: "Wen Su" <wen.su@mediatek.com>

add dt-binding document for MediaTek MT6359 PMIC

Signed-off-by: Wen Su <wen.su@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/regulator/mt6359-regulator.txt        | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6359-regulator.txt
new file mode 100644
index 0000000..c86aaa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.txt
@@ -0,0 +1,58 @@
+Mediatek MT6359 Regulator
+
+Required properties:
+- compatible: "mediatek,mt6359-regulator"
+- mt6359regulator: List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  The definition for each of these nodes is defined using the standard binding
+  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+  buck_vs1, buck_vgpu11, buck_vmodem, buck_vpu, buck_vcore, buck_vs2,
+  buck_vpa, buck_vproc2, buck_vproc1, buck_vcore_sshub
+LDO:
+  ldo_vaud18, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vusb, ldo_vsram_proc2,
+  ldo_vio18, ldo_vcamio, ldo_vcn18, ldo_vfe28, ldo_vcn13, ldo_vcn33_1_bt,
+  ldo_vcn13_1_wifi, ldo_vaux18, ldo_vsram_others, ldo_vefuse, ldo_vxo22,
+  ldo_vrfck, ldo_vbif28, ldo_vio28, ldo_vemc, ldo_vcn33_2_bt, ldo_vcn33_2_wifi,
+  ldo_va12, ldo_va09, ldo_vrf18, ldo_vsram_md, ldo_vufs, ldo_vm18, ldo_vbbck,
+  ldo_vsram_proc1, ldo_vsim2, ldo_vsram_others_sshub
+
+Example:
+	pmic {
+		compatible = "mediatek,mt6359";
+
+		mt6359regulator: mt6359regulator {
+			compatible = "mediatek,mt6359-regulator";
+
+			mt6359_vs1_buck_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+			mt6359_vgpu11_buck_reg: buck_vgpu11 {
+				regulator-name = "vgpu11";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vaud18_ldo_reg: ldo_vaud18 {
+				regulator-name = "vaud18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vsim1_ldo_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <480>;
+			};
+		};
+	};
+
-- 
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  reply	other threads:[~2020-02-06  3:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-06  3:06 [PATCH v2 0/4] Add Support for MediaTek PMIC MT6359 Regulator Wen Su
2020-02-06  3:06 ` Wen Su [this message]
2020-02-06 11:49   ` [PATCH v2 1/4] dt-bindings: regulator: Add document for MT6359 regulator Mark Brown
2020-02-10 11:57     ` Wen Su
2020-02-11 16:06       ` Matthias Brugger
2020-02-12  6:08         ` Wen Su
2020-02-06  3:06 ` [PATCH v2 2/4] mfd: Add for PMIC MT6359 registers definition Wen Su
2020-02-06  3:06 ` [PATCH v2 3/4] regulator: mt6359: Add support for MT6359 regulator Wen Su
2020-02-06  3:06 ` [PATCH v2 4/4] arm64: dts: mt6359: add PMIC MT6359 related nodes Wen Su

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580958411-2478-2-git-send-email-Wen.Su@mediatek.com \
    --to=wen.su@mediatek.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=wsd_upstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).