linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Marco Elver <elver@google.com>
To: Alexander Potapenko <glider@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>,
	 Vegard Nossum <vegard.nossum@oracle.com>,
	Dmitry Vyukov <dvyukov@google.com>,
	 Linux Memory Management List <linux-mm@kvack.org>,
	Al Viro <viro@zeniv.linux.org.uk>,
	 Andreas Dilger <adilger.kernel@dilger.ca>,
	Andrew Morton <akpm@linux-foundation.org>,
	 Andrey Konovalov <andreyknvl@google.com>,
	Andrey Ryabinin <aryabinin@virtuozzo.com>,
	 Andy Lutomirski <luto@kernel.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	 Arnd Bergmann <arnd@arndb.de>,
	Christoph Hellwig <hch@infradead.org>,
	Christoph Hellwig <hch@lst.de>,
	 "Darrick J. Wong" <darrick.wong@oracle.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	 Eric Biggers <ebiggers@google.com>,
	Eric Dumazet <edumazet@google.com>,
	 Eric Van Hensbergen <ericvh@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Harry Wentland <harry.wentland@amd.com>,
	Ilya Leoshkevich <iii@linux.ibm.com>, Ingo Molnar <mingo@elte.hu>,
	 Jason Wang <jasowang@redhat.com>, Jens Axboe <axboe@kernel.dk>,
	 Marek Szyprowski <m.szyprowski@samsung.com>,
	Mark Rutland <mark.rutland@arm.com>,
	 "Martin K. Petersen" <martin.petersen@oracle.com>,
	Martin Schwidefsky <schwidefsky@de.ibm.com>,
	 Matthew Wilcox <willy@infradead.org>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Michal Simek <monstr@monstr.eu>,  Petr Mladek <pmladek@suse.com>,
	Qian Cai <cai@lca.pw>, Randy Dunlap <rdunlap@infradead.org>,
	 Robin Murphy <robin.murphy@arm.com>,
	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>,
	 Steven Rostedt <rostedt@goodmis.org>,
	Takashi Iwai <tiwai@suse.com>, "Theodore Ts'o" <tytso@mit.edu>,
	 Thomas Gleixner <tglx@linutronix.de>,
	Vasily Gorbik <gor@linux.ibm.com>,
	Wolfram Sang <wsa@the-dreams.de>
Subject: Re: [PATCH RFC v3 16/36] crypto: kmsan: disable accelerated configs under KMSAN
Date: Mon, 2 Dec 2019 14:25:22 +0100	[thread overview]
Message-ID: <CANpmjNMh0FUoV82g6=40jgQPgqLopj9jR9ueJtidP-eodZUKyg@mail.gmail.com> (raw)
In-Reply-To: <20191122112621.204798-17-glider@google.com>

On Fri, 22 Nov 2019 at 12:27, <glider@google.com> wrote:
>
> KMSAN is unable to understand when initialized values come from assembly.
> Disable accelerated configs in KMSAN builds to prevent false positive
> reports.
>
> Signed-off-by: Alexander Potapenko <glider@google.com>
> To: Alexander Potapenko <glider@google.com>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Vegard Nossum <vegard.nossum@oracle.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Cc: linux-mm@kvack.org
> ---
>
> Change-Id: Iddc71a2a27360e036d719c0940ebf15553cf8de8
> ---
>  crypto/Kconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
>
> diff --git a/crypto/Kconfig b/crypto/Kconfig
> index 9e524044d312..502a75f1b597 100644
> --- a/crypto/Kconfig
> +++ b/crypto/Kconfig
> @@ -309,11 +309,15 @@ config CRYPTO_AEGIS128
>  config CRYPTO_AEGIS128_SIMD
>         bool "Support SIMD acceleration for AEGIS-128"
>         depends on CRYPTO_AEGIS128 && ((ARM || ARM64) && KERNEL_MODE_NEON)
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN

Probably fine to put this on one line:

    depends on !KMSAN # avoid false positives from assembly

likewise for all below.

>         default y
>
>  config CRYPTO_AEGIS128_AESNI_SSE2
>         tristate "AEGIS-128 AEAD algorithm (x86_64 AESNI+SSE2 implementation)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_AEAD
>         select CRYPTO_SIMD
>         help
> @@ -571,6 +575,8 @@ config CRYPTO_CRC32C
>  config CRYPTO_CRC32C_INTEL
>         tristate "CRC32c INTEL hardware acceleration"
>         depends on X86
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_HASH
>         help
>           In Intel processor with SSE4.2 supported, the processor will
> @@ -611,6 +617,8 @@ config CRYPTO_CRC32
>  config CRYPTO_CRC32_PCLMUL
>         tristate "CRC32 PCLMULQDQ hardware acceleration"
>         depends on X86
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_HASH
>         select CRC32
>         help
> @@ -649,6 +657,8 @@ config CRYPTO_CRCT10DIF
>  config CRYPTO_CRCT10DIF_PCLMUL
>         tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
>         depends on X86 && 64BIT && CRC_T10DIF
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_HASH
>         help
>           For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
> @@ -695,6 +705,8 @@ config CRYPTO_POLY1305
>  config CRYPTO_POLY1305_X86_64
>         tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_POLY1305
>         help
>           Poly1305 authenticator algorithm, RFC7539.
> @@ -814,6 +826,8 @@ config CRYPTO_SHA1
>  config CRYPTO_SHA1_SSSE3
>         tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_SHA1
>         select CRYPTO_HASH
>         help
> @@ -825,6 +839,8 @@ config CRYPTO_SHA1_SSSE3
>  config CRYPTO_SHA256_SSSE3
>         tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_SHA256
>         select CRYPTO_HASH
>         help
> @@ -837,6 +853,8 @@ config CRYPTO_SHA256_SSSE3
>  config CRYPTO_SHA512_SSSE3
>         tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_SHA512
>         select CRYPTO_HASH
>         help
> @@ -1011,6 +1029,8 @@ config CRYPTO_WP512
>  config CRYPTO_GHASH_CLMUL_NI_INTEL
>         tristate "GHASH hash function (CLMUL-NI accelerated)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_CRYPTD
>         help
>           This is the x86_64 CLMUL-NI accelerated implementation of
> @@ -1064,6 +1084,8 @@ config CRYPTO_AES_TI
>  config CRYPTO_AES_NI_INTEL
>         tristate "AES cipher algorithms (AES-NI)"
>         depends on X86
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_AEAD
>         select CRYPTO_LIB_AES
>         select CRYPTO_ALGAPI
> @@ -1190,6 +1212,8 @@ config CRYPTO_BLOWFISH_COMMON
>  config CRYPTO_BLOWFISH_X86_64
>         tristate "Blowfish cipher algorithm (x86_64)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_BLOWFISH_COMMON
>         help
> @@ -1221,6 +1245,8 @@ config CRYPTO_CAMELLIA_X86_64
>         tristate "Camellia cipher algorithm (x86_64)"
>         depends on X86 && 64BIT
>         depends on CRYPTO
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_GLUE_HELPER_X86
>         help
> @@ -1238,6 +1264,8 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
>         tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
>         depends on X86 && 64BIT
>         depends on CRYPTO
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_CAMELLIA_X86_64
>         select CRYPTO_GLUE_HELPER_X86
> @@ -1258,6 +1286,8 @@ config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
>         tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
>         depends on X86 && 64BIT
>         depends on CRYPTO
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
>         help
>           Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
> @@ -1303,6 +1333,8 @@ config CRYPTO_CAST5
>  config CRYPTO_CAST5_AVX_X86_64
>         tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_CAST5
>         select CRYPTO_CAST_COMMON
> @@ -1325,6 +1357,8 @@ config CRYPTO_CAST6
>  config CRYPTO_CAST6_AVX_X86_64
>         tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_CAST6
>         select CRYPTO_CAST_COMMON
> @@ -1360,6 +1394,8 @@ config CRYPTO_DES_SPARC64
>  config CRYPTO_DES3_EDE_X86_64
>         tristate "Triple DES EDE cipher algorithm (x86-64)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_LIB_DES
>         help
> @@ -1426,6 +1462,8 @@ config CRYPTO_CHACHA20
>  config CRYPTO_CHACHA20_X86_64
>         tristate "ChaCha stream cipher algorithms (x86_64/SSSE3/AVX2/AVX-512VL)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_CHACHA20
>         help
> @@ -1462,6 +1500,8 @@ config CRYPTO_SERPENT
>  config CRYPTO_SERPENT_SSE2_X86_64
>         tristate "Serpent cipher algorithm (x86_64/SSE2)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_GLUE_HELPER_X86
>         select CRYPTO_SERPENT
> @@ -1481,6 +1521,8 @@ config CRYPTO_SERPENT_SSE2_X86_64
>  config CRYPTO_SERPENT_SSE2_586
>         tristate "Serpent cipher algorithm (i586/SSE2)"
>         depends on X86 && !64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_GLUE_HELPER_X86
>         select CRYPTO_SERPENT
> @@ -1500,6 +1542,8 @@ config CRYPTO_SERPENT_SSE2_586
>  config CRYPTO_SERPENT_AVX_X86_64
>         tristate "Serpent cipher algorithm (x86_64/AVX)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_GLUE_HELPER_X86
>         select CRYPTO_SERPENT
> @@ -1520,6 +1564,8 @@ config CRYPTO_SERPENT_AVX_X86_64
>  config CRYPTO_SERPENT_AVX2_X86_64
>         tristate "Serpent cipher algorithm (x86_64/AVX2)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_SERPENT_AVX_X86_64
>         help
>           Serpent cipher algorithm, by Anderson, Biham & Knudsen.
> @@ -1615,6 +1661,8 @@ config CRYPTO_TWOFISH_586
>  config CRYPTO_TWOFISH_X86_64
>         tristate "Twofish cipher algorithm (x86_64)"
>         depends on (X86 || UML_X86) && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_ALGAPI
>         select CRYPTO_TWOFISH_COMMON
>         help
> @@ -1631,6 +1679,8 @@ config CRYPTO_TWOFISH_X86_64
>  config CRYPTO_TWOFISH_X86_64_3WAY
>         tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_TWOFISH_COMMON
>         select CRYPTO_TWOFISH_X86_64
> @@ -1652,6 +1702,8 @@ config CRYPTO_TWOFISH_X86_64_3WAY
>  config CRYPTO_TWOFISH_AVX_X86_64
>         tristate "Twofish cipher algorithm (x86_64/AVX)"
>         depends on X86 && 64BIT
> +       # Disable under KMSAN to prevent false positives from assembly.
> +       depends on !KMSAN
>         select CRYPTO_BLKCIPHER
>         select CRYPTO_GLUE_HELPER_X86
>         select CRYPTO_SIMD
> --
> 2.24.0.432.g9d3f5f5b63-goog
>


  reply	other threads:[~2019-12-02 13:25 UTC|newest]

Thread overview: 120+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-22 11:25 [PATCH RFC v3 00/36] Add KernelMemorySanitizer infrastructure glider
2019-11-22 11:25 ` [PATCH RFC v3 01/36] stackdepot: check depot_index before accessing the stack slab glider
2019-11-27 14:22   ` Marco Elver
2019-11-22 11:25 ` [PATCH RFC v3 02/36] stackdepot: build with -fno-builtin glider
2019-11-27 14:22   ` Marco Elver
2019-11-22 11:25 ` [PATCH RFC v3 03/36] kasan: stackdepot: move filter_irq_stacks() to stackdepot.c glider
2019-11-27 14:22   ` Marco Elver
2019-11-27 14:56     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 04/36] stackdepot: reserve 5 extra bits in depot_stack_handle_t glider
2019-11-27 14:23   ` Marco Elver
2019-11-22 11:25 ` [PATCH RFC v3 05/36] kmsan: add ReST documentation glider
2019-11-27 14:22   ` Marco Elver
2019-12-03 12:42     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 06/36] kmsan: gfp: introduce __GFP_NO_KMSAN_SHADOW glider
2019-11-27 14:48   ` Marco Elver
2019-12-03 12:57     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 07/36] kmsan: introduce __no_sanitize_memory and __SANITIZE_MEMORY__ glider
2019-11-28 13:13   ` Marco Elver
2019-11-29 16:09   ` Andrey Konovalov
2019-12-16 11:35     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 08/36] kmsan: reduce vmalloc space glider
2019-11-28 13:30   ` Marco Elver
2019-11-22 11:25 ` [PATCH RFC v3 09/36] kmsan: add KMSAN bits to struct page and struct task_struct glider
2019-11-28 13:44   ` Marco Elver
2019-11-28 14:05     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 10/36] kmsan: add KMSAN runtime glider
2019-11-24 19:44   ` Wolfram Sang
2019-11-25  9:14     ` Alexander Potapenko
2019-11-29 16:07   ` Marco Elver
2019-12-19 14:16     ` Alexander Potapenko
2019-12-02 15:39   ` Andrey Konovalov
2019-12-20 18:58     ` Alexander Potapenko
2019-12-03 14:34   ` Andrey Konovalov
2019-11-22 11:25 ` [PATCH RFC v3 11/36] kmsan: stackdepot: don't allocate KMSAN metadata for stackdepot glider
2019-11-29 14:52   ` Andrey Konovalov
2019-12-03 14:27     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 12/36] kmsan: define READ_ONCE_NOCHECK() glider
2019-12-02 10:03   ` Marco Elver
2019-12-03 12:45     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 13/36] kmsan: make READ_ONCE_TASK_STACK() return initialized values glider
2019-12-02 10:07   ` Marco Elver
2019-12-05 15:52     ` Alexander Potapenko
2019-11-22 11:25 ` [PATCH RFC v3 14/36] kmsan: x86: sync metadata pages on page fault glider
2019-11-22 11:26 ` [PATCH RFC v3 15/36] kmsan: add tests for KMSAN glider
2019-11-29 14:14   ` Andrey Konovalov
2019-12-05 14:30     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 16/36] crypto: kmsan: disable accelerated configs under KMSAN glider
2019-12-02 13:25   ` Marco Elver [this message]
2019-12-05 14:51     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 17/36] kmsan: x86: disable UNWINDER_ORC " glider
2019-12-02 13:30   ` Marco Elver
2019-11-22 11:26 ` [PATCH RFC v3 18/36] kmsan: disable LOCK_DEBUGGING_SUPPORT glider
2019-12-02 13:33   ` Marco Elver
2019-12-03 14:34     ` Alexander Potapenko
2019-12-03 15:00       ` Qian Cai
2019-12-03 15:14         ` Alexander Potapenko
2019-12-03 18:02           ` Qian Cai
2019-12-03 18:38           ` Steven Rostedt
2019-12-04  8:41             ` Alexander Potapenko
2019-12-04 12:22               ` Petr Mladek
2019-12-04 13:12                 ` Qian Cai
2019-12-04 16:24                   ` Alexander Potapenko
2019-12-04 18:03                     ` Qian Cai
2019-11-22 11:26 ` [PATCH RFC v3 20/36] kmsan: x86: increase stack sizes in KMSAN builds glider
2019-12-02 14:31   ` Marco Elver
2019-11-22 11:26 ` [PATCH RFC v3 21/36] kmsan: disable KMSAN instrumentation for certain kernel parts glider
2019-11-29 15:07   ` Andrey Konovalov
2019-12-10 10:35     ` Alexander Potapenko
2019-12-10 12:38       ` Alexander Potapenko
2019-12-10 12:43       ` Qian Cai
2019-11-22 11:26 ` [PATCH RFC v3 22/36] kmsan: mm: call KMSAN hooks from SLUB code glider
2019-12-02 15:36   ` Marco Elver
2019-12-10 12:07     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 23/36] kmsan: call KMSAN hooks where needed glider
2019-11-26 10:17   ` Petr Mladek
2019-11-26 10:52     ` Alexander Potapenko
2019-11-29 16:21   ` Andrey Konovalov
2019-12-16 11:30     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 24/36] kmsan: disable instrumentation of certain functions glider
2019-11-29 14:59   ` Andrey Konovalov
2019-12-18 10:02     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 25/36] kmsan: unpoison |tlb| in arch_tlb_gather_mmu() glider
2019-11-29 15:08   ` Andrey Konovalov
2019-12-03 14:19     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 26/36] kmsan: use __msan_memcpy() where possible glider
2019-11-29 15:13   ` Andrey Konovalov
2019-12-05 15:46     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 27/36] kmsan: hooks for copy_to_user() and friends glider
2019-11-29 15:34   ` Andrey Konovalov
2019-12-05 16:00     ` Alexander Potapenko
2019-12-05 16:44       ` Andrey Konovalov
2019-12-11 14:22         ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 28/36] kmsan: enable KMSAN builds glider
2019-11-29 15:55   ` Andrey Konovalov
2019-12-11 12:51     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 29/36] kmsan: handle /dev/[u]random glider
2019-11-22 11:26 ` [PATCH RFC v3 30/36] kmsan: virtio: check/unpoison scatterlist in vring_map_one_sg() glider
2019-11-22 11:26 ` [PATCH RFC v3 31/36] kmsan: disable strscpy() optimization under KMSAN glider
2019-12-02 15:51   ` Marco Elver
2019-12-02 16:23     ` Alexander Potapenko
2019-12-03 11:19       ` Alexander Potapenko
2019-12-03 11:24         ` Marco Elver
2019-12-03 11:27           ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 32/36] kmsan: add iomap support glider
2019-12-03 12:50   ` Marco Elver
2019-12-03 14:07     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 33/36] kmsan: dma: unpoison memory mapped by dma_direct_map_page() glider
2019-11-22 11:26 ` [PATCH RFC v3 34/36] kmsan: disable physical page merging in biovec glider
2019-12-03 12:54   ` Marco Elver
2019-12-03 13:38     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 35/36] kmsan: ext4: skip block merging logic in ext4_mpage_readpages for KMSAN glider
2019-11-25 16:05   ` Robin Murphy
2019-11-25 17:03     ` Alexander Potapenko
2019-12-03 14:22   ` Marco Elver
2019-12-05 14:31     ` Alexander Potapenko
2019-11-22 11:26 ` [PATCH RFC v3 36/36] net: kasan: kmsan: support CONFIG_GENERIC_CSUM on x86, enable it for KASAN/KMSAN glider
2019-12-03 14:17   ` Marco Elver
2019-12-05 14:37     ` Alexander Potapenko
2019-11-29 14:39 ` [PATCH RFC v3 00/36] Add KernelMemorySanitizer infrastructure Marco Elver
2019-12-02 16:02   ` Alexander Potapenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CANpmjNMh0FUoV82g6=40jgQPgqLopj9jR9ueJtidP-eodZUKyg@mail.gmail.com' \
    --to=elver@google.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=akpm@linux-foundation.org \
    --cc=andreyknvl@google.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=arnd@arndb.de \
    --cc=aryabinin@virtuozzo.com \
    --cc=axboe@kernel.dk \
    --cc=cai@lca.pw \
    --cc=darrick.wong@oracle.com \
    --cc=davem@davemloft.net \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dvyukov@google.com \
    --cc=ebiggers@google.com \
    --cc=edumazet@google.com \
    --cc=ericvh@gmail.com \
    --cc=glider@google.com \
    --cc=gor@linux.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=harry.wentland@amd.com \
    --cc=hch@infradead.org \
    --cc=hch@lst.de \
    --cc=herbert@gondor.apana.org.au \
    --cc=iii@linux.ibm.com \
    --cc=jasowang@redhat.com \
    --cc=linux-mm@kvack.org \
    --cc=luto@kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=martin.petersen@oracle.com \
    --cc=mingo@elte.hu \
    --cc=monstr@monstr.eu \
    --cc=mst@redhat.com \
    --cc=pmladek@suse.com \
    --cc=rdunlap@infradead.org \
    --cc=robin.murphy@arm.com \
    --cc=rostedt@goodmis.org \
    --cc=schwidefsky@de.ibm.com \
    --cc=sergey.senozhatsky@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=tiwai@suse.com \
    --cc=tytso@mit.edu \
    --cc=vegard.nossum@oracle.com \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@infradead.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).