linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rickard Andersson <rickaran@axis.com>
To: <miquel.raynal@bootlin.com>, <linux-mtd@lists.infradead.org>
Cc: rickaran@axis.com
Subject: [PATCH v2 2/2] mtd: rawnand: Add timings for Kioxia TH58NVG2S3HBAI4
Date: Wed, 20 May 2020 15:38:54 +0200	[thread overview]
Message-ID: <20200520133854.25241-2-rickaran@axis.com> (raw)
In-Reply-To: <20200520133854.25241-1-rickaran@axis.com>

From: Rickard x Andersson <rickaran@axis.com>

The Kioxia/Toshiba TH58NVG2S3HBAI4 NAND memory is not a
ONFI compliant memory. The timings of the memory is quite
close to ONFI mode 4 but is breaking that spec.

Erase block read speed is increased from 6910 KiB/s to
13490 KiB/s. Erase block write speed is increased from
3350 KiB/s to 4410 KiB/s.

Tested on IMX6SX which has a NAND controller supporting
EDO mode.

Signed-off-by: Rickard x Andersson <rickaran@axis.com>
---
 drivers/mtd/nand/raw/nand_ids.c     |  3 ++
 drivers/mtd/nand/raw/nand_toshiba.c | 66 +++++++++++++++++++++++++++++++++++++
 2 files changed, 69 insertions(+)

diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index e0dbc2e316c7..8b676e8b481b 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -52,6 +52,9 @@ struct nand_flash_dev nand_flash_ids[] = {
 		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
 		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
 		  NAND_ECC_INFO(40, SZ_1K), 4 },
+	{"TH58NVG2S3HBAI4 4G 3.3V 8-bit",
+		{ .id = {0x98, 0xdc, 0x91, 0x15, 0x76} },
+		  SZ_2K, SZ_512, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512) },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index b6efaf5195bb..60ca895b1775 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -26,6 +26,52 @@
 /* Max ECC Steps for BENAND */
 #define TOSHIBA_NAND_MAX_ECC_STEPS		8
 
+static const struct nand_data_interface th58nvg2s3hbai4_timings = {
+	.type = NAND_SDR_IFACE,
+	.timings.mode = 0,
+	.timings.sdr = {
+		.tPROG_max = 700000000,
+		.tBERS_max = 5000000000,
+		.tCCS_min = 500000,
+		.tR_max = 200000000,
+		.tADL_min = 400000,
+		.tALH_min = 5000,
+		.tALS_min = 12000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 20000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 12000,
+		.tCOH_min = 0,
+		.tCS_min = 20000,
+		.tDH_min = 5000,
+		.tDS_min = 12000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 25000,
+		.tREA_max = 20000,
+		.tREH_min = 10000,
+		.tRHOH_min = 25000,
+		.tRHW_min = 30000,
+		.tRHZ_max = 60000,
+		.tRLOH_min = 5000,
+		.tRP_min = 12000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 25000,
+		.tWH_min = 10000,
+		.tWHR_min = 60000,
+		.tWP_min = 12000,
+		.tWW_min = 100000,
+	}
+};
+
+
 static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip,
 						 u8 *buf)
 {
@@ -194,6 +240,18 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 	}
 }
 
+static int th58nvg2s3hbai4_choose_data_interface(struct nand_chip *chip)
+{
+	int ret;
+
+	chip->data_interface = th58nvg2s3hbai4_timings;
+
+	/* Check if the controller can handle the timings */
+	ret = nand_test_data_interface(chip);
+
+	return ret;
+}
+
 static int tc58teg5dclta00_init(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
@@ -205,6 +263,12 @@ static int tc58teg5dclta00_init(struct nand_chip *chip)
 	return 0;
 }
 
+static int th58nvg2s3hbai4_init(struct nand_chip *chip)
+{
+	chip->ops.choose_data_interface = th58nvg2s3hbai4_choose_data_interface;
+	return 0;
+}
+
 static int toshiba_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
@@ -217,6 +281,8 @@ static int toshiba_nand_init(struct nand_chip *chip)
 
 	if (!strcmp("TC58TEG5DCLTA00", chip->parameters.model))
 		tc58teg5dclta00_init(chip);
+	if (!strncmp("TH58NVG2S3HBAI4", chip->parameters.model, 15))
+		th58nvg2s3hbai4_init(chip);
 
 	return 0;
 }
-- 
2.11.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-05-20 13:39 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20 13:38 [PATCH v2 1/2] mtd: rawnand: Add a helper for testing data interface Rickard Andersson
2020-05-20 13:38 ` Rickard Andersson [this message]
2020-05-20 21:15   ` [PATCH v2 2/2] mtd: rawnand: Add timings for Kioxia TH58NVG2S3HBAI4 Boris Brezillon
2020-05-20 13:55 ` [PATCH v2 1/2] mtd: rawnand: Add a helper for testing data interface Miquel Raynal
2020-05-20 14:52   ` SV: " Rickard X Andersson
2020-05-20 16:40     ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200520133854.25241-2-rickaran@axis.com \
    --to=rickaran@axis.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).