From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>
Cc: linux-nvme@lists.infradead.org, Sagi Grimberg <sagi@grimberg.me>,
Keith Busch <keith.busch@wdc.com>
Subject: Re: [PATCH 2/2] nvme: add 'queue_if_no_path' semantics
Date: Tue, 6 Oct 2020 15:30:14 +0200 [thread overview]
Message-ID: <00e75643-d422-ca12-1648-02ca89044182@suse.de> (raw)
In-Reply-To: <20201006083926.GA13568@lst.de>
On 10/6/20 10:39 AM, Christoph Hellwig wrote:
> On Tue, Oct 06, 2020 at 10:29:49AM +0200, Hannes Reinecke wrote:
>>> All multipath devices should behave the same. No special casing for
>>> PCIe, please.
>>>
>> Even if the default behaviour breaks PCI hotplug?
>
> Why would it "break" PCI hotplug?
>
When running under MD RAID:
Before hotplug:
# nvme list
Node SN Model
Namespace Usage Format FW Rev
---------------- --------------------
---------------------------------------- ---------
-------------------------- ---------------- --------
/dev/nvme0n1 SLESNVME1 QEMU NVMe Ctrl
1 17.18 GB / 17.18 GB 512 B + 0 B 1.0
/dev/nvme1n1 SLESNVME2 QEMU NVMe Ctrl
1 4.29 GB / 4.29 GB 512 B + 0 B 1.0
/dev/nvme2n1 SLESNVME3 QEMU NVMe Ctrl
1 4.29 GB / 4.29 GB 512 B + 0 B 1.0
After hotplug:
# nvme list
Node SN Model
Namespace Usage Format FW Rev
---------------- --------------------
---------------------------------------- ---------
-------------------------- ---------------- --------
/dev/nvme0n1 SLESNVME1 QEMU NVMe Ctrl
1 17.18 GB / 17.18 GB 512 B + 0 B 1.0
/dev/nvme1n1 SLESNVME2 QEMU NVMe Ctrl
-1 0.00 B / 0.00 B 1 B + 0 B 1.0
/dev/nvme1n2 SLESNVME2 QEMU NVMe Ctrl
1 4.29 GB / 4.29 GB 512 B + 0 B 1.0
/dev/nvme2n1 SLESNVME3 QEMU NVMe Ctrl
1 4.29 GB / 4.29 GB 512 B + 0 B 1.0
And MD hasn't been notified that the device is gone:
# cat /proc/mdstat
Personalities : [raid10]
md0 : active raid10 nvme2n1[1] nvme1n1[0]
4189184 blocks super 1.2 2 near-copies [2/2] [UU]
bitmap: 0/1 pages [0KB], 65536KB chunk
unused devices: <none>
Once I do some I/O to it MD recognized a faulty device:
# cat /proc/mdstat
Personalities : [raid10]
md0 : active raid10 nvme2n1[1] nvme1n1[0](F)
4189184 blocks super 1.2 2 near-copies [2/1] [_U]
bitmap: 0/1 pages [0KB], 65536KB chunk
unused devices: <none>
but the re-added device isn't added to the MD RAID.
In fact, it has been assigned a _different_ namespace ID:
[ 904.299065] pcieport 0000:00:08.0: pciehp: Slot(0-1): Card present
[ 904.299067] pcieport 0000:00:08.0: pciehp: Slot(0-1): Link Up
[ 904.435314] pci 0000:02:00.0: [8086:5845] type 00 class 0x010802
[ 904.435523] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 904.435676] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff]
[ 904.436982] pci 0000:02:00.0: BAR 0: assigned [mem
0xc1200000-0xc1201fff 64bit]
[ 904.437086] pci 0000:02:00.0: BAR 4: assigned [mem 0xc1202000-0xc1202fff]
[ 904.437118] pcieport 0000:00:08.0: PCI bridge to [bus 02]
[ 904.437137] pcieport 0000:00:08.0: bridge window [io 0x7000-0x7fff]
[ 904.439024] pcieport 0000:00:08.0: bridge window [mem
0xc1200000-0xc13fffff]
[ 904.440229] pcieport 0000:00:08.0: bridge window [mem
0x802000000-0x803ffffff 64bit pref]
[ 904.447150] nvme nvme3: pci function 0000:02:00.0
[ 904.447487] nvme 0000:02:00.0: enabling device (0000 -> 0002)
[ 904.458880] nvme nvme3: 1/0/0 default/read/poll queues
[ 904.461296] nvme1n2: detected capacity change from 0 to 4294967296
and the 'old', pre-hotplug device still lingers on in the 'nvme list'
output.
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
next prev parent reply other threads:[~2020-10-06 13:30 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-05 12:44 [RFC PATCHv3 0/2] nvme: queue_if_no_path functionality Hannes Reinecke
2020-10-05 12:44 ` [PATCH 1/2] nvme-mpath: delete disk after last connection Hannes Reinecke
2020-10-05 12:50 ` Christoph Hellwig
2021-03-05 20:06 ` Sagi Grimberg
2021-03-04 14:34 ` Daniel Wagner
2020-10-05 12:45 ` [PATCH 2/2] nvme: add 'queue_if_no_path' semantics Hannes Reinecke
2020-10-05 12:52 ` Christoph Hellwig
2020-10-06 5:48 ` Hannes Reinecke
2020-10-06 7:51 ` Christoph Hellwig
2020-10-06 8:07 ` Hannes Reinecke
2020-10-06 8:27 ` Christoph Hellwig
2020-10-06 8:29 ` Hannes Reinecke
2020-10-06 8:39 ` Christoph Hellwig
2020-10-06 13:30 ` Hannes Reinecke [this message]
2020-10-06 13:45 ` Hannes Reinecke
2021-03-05 20:31 ` Sagi Grimberg
2021-03-08 13:17 ` Hannes Reinecke
2021-03-15 17:21 ` Sagi Grimberg
2020-10-06 17:41 ` Keith Busch
2021-03-05 20:11 ` Sagi Grimberg
2021-03-11 12:41 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00e75643-d422-ca12-1648-02ca89044182@suse.de \
--to=hare@suse.de \
--cc=hch@lst.de \
--cc=keith.busch@wdc.com \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).