From: Vladimir Oltean <olteanv@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>
Cc: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
bridge@lists.linux-foundation.org,
Roopa Prabhu <roopa@nvidia.com>,
Nikolay Aleksandrov <nikolay@nvidia.com>,
Jiri Pirko <jiri@resnulli.us>, Ido Schimmel <idosch@idosch.org>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
UNGLinuxDriver@microchip.com, Vadym Kochan <vkochan@marvell.com>,
Taras Chornyi <tchornyi@marvell.com>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Ivan Vecera <ivecera@redhat.com>,
linux-omap@vger.kernel.org
Subject: [PATCH v2 net-next 02/11] net: bridge: offload all port flags at once in br_setport
Date: Tue, 9 Feb 2021 17:19:27 +0200 [thread overview]
Message-ID: <20210209151936.97382-3-olteanv@gmail.com> (raw)
In-Reply-To: <20210209151936.97382-1-olteanv@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
The br_switchdev_set_port_flag function uses the atomic notifier call
chain because br_setport runs in an atomic section (under br->lock).
This is because port flag changes need to be synchronized with the data
path. But actually the switchdev notifier doesn't need that, only
br_set_port_flag does. So we can collect all the port flag changes and
only emit the notification at the end, then revert the changes if the
switchdev notification failed.
There's also the other aspect: if for example this command:
ip link set swp0 type bridge_slave flood off mcast_flood off learning off
succeeded at configuring BR_FLOOD and BR_MCAST_FLOOD but not at
BR_LEARNING, there would be no attempt to revert the partial state in
any way. Arguably, if the user changes more than one flag through the
same netlink command, this one _should_ be all or nothing, which means
it should be passed through switchdev as all or nothing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v2:
Patch is new.
net/bridge/br_netlink.c | 155 +++++++++++++++-----------------------
net/bridge/br_switchdev.c | 7 +-
2 files changed, 66 insertions(+), 96 deletions(-)
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index bd3962da345a..2c110bcbc6d0 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -853,103 +853,82 @@ static int br_set_port_state(struct net_bridge_port *p, u8 state)
}
/* Set/clear or port flags based on attribute */
-static int br_set_port_flag(struct net_bridge_port *p, struct nlattr *tb[],
- int attrtype, unsigned long mask)
+static void br_set_port_flag(struct net_bridge_port *p, struct nlattr *tb[],
+ int attrtype, unsigned long mask)
{
- unsigned long flags;
- int err;
-
if (!tb[attrtype])
- return 0;
+ return;
if (nla_get_u8(tb[attrtype]))
- flags = p->flags | mask;
+ p->flags |= mask;
else
- flags = p->flags & ~mask;
-
- err = br_switchdev_set_port_flag(p, flags, mask);
- if (err)
- return err;
-
- p->flags = flags;
- return 0;
+ p->flags &= ~mask;
}
/* Process bridge protocol info on port */
static int br_setport(struct net_bridge_port *p, struct nlattr *tb[])
{
- unsigned long old_flags = p->flags;
- bool br_vlan_tunnel_old = false;
+ unsigned long old_flags, changed_mask;
+ bool br_vlan_tunnel_old;
int err;
- err = br_set_port_flag(p, tb, IFLA_BRPORT_MODE, BR_HAIRPIN_MODE);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_GUARD, BR_BPDU_GUARD);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_FAST_LEAVE, BR_MULTICAST_FAST_LEAVE);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_LEARNING, BR_LEARNING);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_UNICAST_FLOOD, BR_FLOOD);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_MCAST_TO_UCAST, BR_MULTICAST_TO_UNICAST);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP, BR_PROXYARP);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP_WIFI, BR_PROXYARP_WIFI);
- if (err)
+ spin_lock_bh(&p->br->lock);
+
+ old_flags = p->flags;
+ br_vlan_tunnel_old = (old_flags & BR_VLAN_TUNNEL) ? true : false;
+
+ br_set_port_flag(p, tb, IFLA_BRPORT_MODE, BR_HAIRPIN_MODE);
+ br_set_port_flag(p, tb, IFLA_BRPORT_GUARD, BR_BPDU_GUARD);
+ br_set_port_flag(p, tb, IFLA_BRPORT_FAST_LEAVE,
+ BR_MULTICAST_FAST_LEAVE);
+ br_set_port_flag(p, tb, IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK);
+ br_set_port_flag(p, tb, IFLA_BRPORT_LEARNING, BR_LEARNING);
+ br_set_port_flag(p, tb, IFLA_BRPORT_UNICAST_FLOOD, BR_FLOOD);
+ br_set_port_flag(p, tb, IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD);
+ br_set_port_flag(p, tb, IFLA_BRPORT_MCAST_TO_UCAST,
+ BR_MULTICAST_TO_UNICAST);
+ br_set_port_flag(p, tb, IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD);
+ br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP, BR_PROXYARP);
+ br_set_port_flag(p, tb, IFLA_BRPORT_PROXYARP_WIFI, BR_PROXYARP_WIFI);
+ br_set_port_flag(p, tb, IFLA_BRPORT_VLAN_TUNNEL, BR_VLAN_TUNNEL);
+ br_set_port_flag(p, tb, IFLA_BRPORT_NEIGH_SUPPRESS, BR_NEIGH_SUPPRESS);
+ br_set_port_flag(p, tb, IFLA_BRPORT_ISOLATED, BR_ISOLATED);
+
+ changed_mask = old_flags ^ p->flags;
+
+ spin_unlock_bh(&p->br->lock);
+
+ err = br_switchdev_set_port_flag(p, p->flags, changed_mask);
+ if (err) {
+ spin_lock_bh(&p->br->lock);
+ p->flags = old_flags;
+ spin_unlock_bh(&p->br->lock);
return err;
+ }
- br_vlan_tunnel_old = (p->flags & BR_VLAN_TUNNEL) ? true : false;
- err = br_set_port_flag(p, tb, IFLA_BRPORT_VLAN_TUNNEL, BR_VLAN_TUNNEL);
- if (err)
- return err;
+ spin_lock_bh(&p->br->lock);
if (br_vlan_tunnel_old && !(p->flags & BR_VLAN_TUNNEL))
nbp_vlan_tunnel_info_flush(p);
+ br_port_flags_change(p, changed_mask);
+
if (tb[IFLA_BRPORT_COST]) {
err = br_stp_set_path_cost(p, nla_get_u32(tb[IFLA_BRPORT_COST]));
if (err)
- return err;
+ goto out;
}
if (tb[IFLA_BRPORT_PRIORITY]) {
err = br_stp_set_port_priority(p, nla_get_u16(tb[IFLA_BRPORT_PRIORITY]));
if (err)
- return err;
+ goto out;
}
if (tb[IFLA_BRPORT_STATE]) {
err = br_set_port_state(p, nla_get_u8(tb[IFLA_BRPORT_STATE]));
if (err)
- return err;
+ goto out;
}
if (tb[IFLA_BRPORT_FLUSH])
@@ -961,7 +940,7 @@ static int br_setport(struct net_bridge_port *p, struct nlattr *tb[])
err = br_multicast_set_port_router(p, mcast_router);
if (err)
- return err;
+ goto out;
}
if (tb[IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT]) {
@@ -970,27 +949,20 @@ static int br_setport(struct net_bridge_port *p, struct nlattr *tb[])
hlimit = nla_get_u32(tb[IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT]);
err = br_multicast_eht_set_hosts_limit(p, hlimit);
if (err)
- return err;
+ goto out;
}
#endif
if (tb[IFLA_BRPORT_GROUP_FWD_MASK]) {
u16 fwd_mask = nla_get_u16(tb[IFLA_BRPORT_GROUP_FWD_MASK]);
- if (fwd_mask & BR_GROUPFWD_MACPAUSE)
- return -EINVAL;
+ if (fwd_mask & BR_GROUPFWD_MACPAUSE) {
+ err = -EINVAL;
+ goto out;
+ }
p->group_fwd_mask = fwd_mask;
}
- err = br_set_port_flag(p, tb, IFLA_BRPORT_NEIGH_SUPPRESS,
- BR_NEIGH_SUPPRESS);
- if (err)
- return err;
-
- err = br_set_port_flag(p, tb, IFLA_BRPORT_ISOLATED, BR_ISOLATED);
- if (err)
- return err;
-
if (tb[IFLA_BRPORT_BACKUP_PORT]) {
struct net_device *backup_dev = NULL;
u32 backup_ifindex;
@@ -999,17 +971,21 @@ static int br_setport(struct net_bridge_port *p, struct nlattr *tb[])
if (backup_ifindex) {
backup_dev = __dev_get_by_index(dev_net(p->dev),
backup_ifindex);
- if (!backup_dev)
- return -ENOENT;
+ if (!backup_dev) {
+ err = -ENOENT;
+ goto out;
+ }
}
err = nbp_backup_change(p, backup_dev);
if (err)
- return err;
+ goto out;
}
- br_port_flags_change(p, old_flags ^ p->flags);
- return 0;
+out:
+ spin_unlock_bh(&p->br->lock);
+
+ return err;
}
/* Change state and parameters on port. */
@@ -1045,9 +1021,7 @@ int br_setlink(struct net_device *dev, struct nlmsghdr *nlh, u16 flags,
if (err)
return err;
- spin_lock_bh(&p->br->lock);
err = br_setport(p, tb);
- spin_unlock_bh(&p->br->lock);
} else {
/* Binary compatibility with old RSTP */
if (nla_len(protinfo) < sizeof(u8))
@@ -1134,17 +1108,10 @@ static int br_port_slave_changelink(struct net_device *brdev,
struct nlattr *data[],
struct netlink_ext_ack *extack)
{
- struct net_bridge *br = netdev_priv(brdev);
- int ret;
-
if (!data)
return 0;
- spin_lock_bh(&br->lock);
- ret = br_setport(br_port_get_rtnl(dev), data);
- spin_unlock_bh(&br->lock);
-
- return ret;
+ return br_setport(br_port_get_rtnl(dev), data);
}
static int br_port_fill_slave_info(struct sk_buff *skb,
diff --git a/net/bridge/br_switchdev.c b/net/bridge/br_switchdev.c
index a9c23ef83443..c004ade25ac0 100644
--- a/net/bridge/br_switchdev.c
+++ b/net/bridge/br_switchdev.c
@@ -65,16 +65,19 @@ int br_switchdev_set_port_flag(struct net_bridge_port *p,
struct switchdev_attr attr = {
.orig_dev = p->dev,
.id = SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS,
- .u.brport_flags = mask,
};
struct switchdev_notifier_port_attr_info info = {
.attr = &attr,
};
int err;
- if (mask & ~BR_PORT_FLAGS_HW_OFFLOAD)
+ flags &= BR_PORT_FLAGS_HW_OFFLOAD;
+ mask &= BR_PORT_FLAGS_HW_OFFLOAD;
+ if (!mask)
return 0;
+ attr.u.brport_flags = mask;
+
/* We run from atomic context here */
err = call_switchdev_notifiers(SWITCHDEV_PORT_ATTR_SET, p->dev,
&info.info, NULL);
--
2.25.1
next prev parent reply other threads:[~2021-02-09 15:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 15:19 [PATCH v2 net-next 00/11] Cleanup in brport flags switchdev offload for DSA Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 01/11] net: switchdev: propagate extack to port attributes Vladimir Oltean
2021-02-09 18:00 ` Ido Schimmel
2021-02-09 15:19 ` Vladimir Oltean [this message]
2021-02-09 18:27 ` [PATCH v2 net-next 02/11] net: bridge: offload all port flags at once in br_setport Vladimir Oltean
2021-02-09 18:36 ` Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 03/11] net: bridge: don't print in br_switchdev_set_port_flag Vladimir Oltean
2021-02-09 17:36 ` Vladimir Oltean
2021-02-09 18:26 ` Ido Schimmel
2021-02-09 15:19 ` [PATCH v2 net-next 04/11] net: bridge: offload initial and final port flags through switchdev Vladimir Oltean
2021-02-09 18:51 ` Ido Schimmel
2021-02-09 20:20 ` Vladimir Oltean
2021-02-09 22:01 ` Ido Schimmel
2021-02-09 22:51 ` Vladimir Oltean
2021-02-10 10:59 ` Ido Schimmel
2021-02-10 23:23 ` Vladimir Oltean
2021-02-11 7:44 ` Ido Schimmel
2021-02-11 9:35 ` Vladimir Oltean
2021-02-11 22:20 ` Ido Schimmel
2021-02-09 15:19 ` [PATCH v2 net-next 05/11] net: dsa: stop setting initial and final brport flags Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 06/11] net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 07/11] net: dsa: kill .port_egress_floods overengineering Vladimir Oltean
2021-02-09 20:37 ` Vladimir Oltean
2021-02-09 21:29 ` Florian Fainelli
2021-02-09 15:19 ` [PATCH v2 net-next 08/11] net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 09/11] net: mscc: ocelot: use separate flooding PGID for broadcast Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 10/11] net: mscc: ocelot: offload bridge port flags to device Vladimir Oltean
2021-02-09 15:19 ` [PATCH v2 net-next 11/11] net: dsa: sja1105: " Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210209151936.97382-3-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=bridge@lists.linux-foundation.org \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=grygorii.strashko@ti.com \
--cc=idosch@idosch.org \
--cc=ioana.ciornei@nxp.com \
--cc=ivecera@redhat.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nikolay@nvidia.com \
--cc=roopa@nvidia.com \
--cc=tchornyi@marvell.com \
--cc=vivien.didelot@gmail.com \
--cc=vkochan@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).