[PATCH v2 net-next 05/11] net: dsa: stop setting initial and final brport flags

[Vladimir Oltean <olteanv@gmail.com>]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

With the bridge driver doing that for us now, we can simplify our
mid-layer logic a little bit, which would have otherwise needed some
tuning for the disabling of address learning that is necessary in
standalone mode.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v2:
None.

 net/dsa/port.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/net/dsa/port.c b/net/dsa/port.c
index 5e079a61528e..aa1cbba7f89f 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -132,11 +132,6 @@ int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br)
 	};
 	int err;
 
-	/* Set the flooding mode before joining the port in the switch */
-	err = dsa_port_bridge_flags(dp, BR_FLOOD | BR_MCAST_FLOOD);
-	if (err)
-		return err;
-
 	/* Here the interface is already bridged. Reflect the current
 	 * configuration so that drivers can program their chips accordingly.
 	 */
@@ -145,10 +140,8 @@ int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br)
 	err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_JOIN, &info);
 
 	/* The bridging is rolled back on error */
-	if (err) {
-		dsa_port_bridge_flags(dp, 0);
+	if (err)
 		dp->bridge_dev = NULL;
-	}
 
 	return err;
 }
@@ -172,9 +165,6 @@ void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br)
 	if (err)
 		pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n");
 
-	/* Port is leaving the bridge, disable flooding */
-	dsa_port_bridge_flags(dp, 0);
-
 	/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
 	 * so allow it to be in BR_STATE_FORWARDING to be kept functional
 	 */
-- 
2.25.1