* [PATCH v2] PCI: Add PCIe 5.0 data rate (32 GT/s) support
@ 2019-06-04 16:24 Gustavo Pimentel
2019-06-04 20:26 ` Bjorn Helgaas
0 siblings, 1 reply; 2+ messages in thread
From: Gustavo Pimentel @ 2019-06-04 16:24 UTC (permalink / raw)
To: bhelgaas, mj, linux-pci, linux-kernel; +Cc: Gustavo Pimentel
PCIe 5.0 allows an effective 32.0 GT/s speed per lane.
Currently if you read a PCIe 5.0 EP link data rate through sysfs, the
resulting output will be "Unknown speed" instead of "32.0 GT/s" as we
would be expect.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
Changes:
v1 -> v2
- Rebase patch
drivers/pci/pci-sysfs.c | 3 +++
drivers/pci/pci.c | 4 +++-
drivers/pci/probe.c | 2 +-
drivers/pci/slot.c | 1 +
include/linux/pci.h | 1 +
include/uapi/linux/pci_regs.h | 4 ++++
6 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 6d27475..d52d304 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -182,6 +182,9 @@ static ssize_t current_link_speed_show(struct device *dev,
return -EINVAL;
switch (linkstat & PCI_EXP_LNKSTA_CLS) {
+ case PCI_EXP_LNKSTA_CLS_32_0GB:
+ speed = "32 GT/s";
+ break;
case PCI_EXP_LNKSTA_CLS_16_0GB:
speed = "16 GT/s";
break;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8abc843..4729a7c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5621,7 +5621,9 @@ enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev)
*/
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2);
if (lnkcap2) { /* PCIe r3.0-compliant */
- if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_16_0GB)
+ if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_32_0GB)
+ return PCIE_SPEED_32_0GT;
+ else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_16_0GB)
return PCIE_SPEED_16_0GT;
else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_8_0GB)
return PCIE_SPEED_8_0GT;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 0e8e2c1..c5f27c8 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -668,7 +668,7 @@ const unsigned char pcie_link_speed[] = {
PCIE_SPEED_5_0GT, /* 2 */
PCIE_SPEED_8_0GT, /* 3 */
PCIE_SPEED_16_0GT, /* 4 */
- PCI_SPEED_UNKNOWN, /* 5 */
+ PCIE_SPEED_32_0GT, /* 5 */
PCI_SPEED_UNKNOWN, /* 6 */
PCI_SPEED_UNKNOWN, /* 7 */
PCI_SPEED_UNKNOWN, /* 8 */
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index f4d92b1..ae4aa0e 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -75,6 +75,7 @@ static const char *pci_bus_speed_strings[] = {
"5.0 GT/s PCIe", /* 0x15 */
"8.0 GT/s PCIe", /* 0x16 */
"16.0 GT/s PCIe", /* 0x17 */
+ "32.0 GT/s PCIe", /* 0x18 */
};
static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 4a5a84d..2173e6b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -258,6 +258,7 @@ enum pci_bus_speed {
PCIE_SPEED_5_0GT = 0x15,
PCIE_SPEED_8_0GT = 0x16,
PCIE_SPEED_16_0GT = 0x17,
+ PCIE_SPEED_32_0GT = 0x18,
PCI_SPEED_UNKNOWN = 0xff,
};
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 2716476..f28e562 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -528,6 +528,7 @@
#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
#define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */
#define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */
+#define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
@@ -556,6 +557,7 @@
#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */
#define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */
+#define PCI_EXP_LNKSTA_CLS_32_0GB 0x0005 /* Current Link Speed 32.0GT/s */
#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */
#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */
@@ -661,6 +663,7 @@
#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */
#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */
#define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */
+#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */
#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
#define PCI_EXP_LNKCTL2_TLS 0x000f
@@ -668,6 +671,7 @@
#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */
#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */
#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */
+#define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */
#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] PCI: Add PCIe 5.0 data rate (32 GT/s) support
2019-06-04 16:24 [PATCH v2] PCI: Add PCIe 5.0 data rate (32 GT/s) support Gustavo Pimentel
@ 2019-06-04 20:26 ` Bjorn Helgaas
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2019-06-04 20:26 UTC (permalink / raw)
To: Gustavo Pimentel; +Cc: mj, linux-pci, linux-kernel
On Tue, Jun 04, 2019 at 06:24:43PM +0200, Gustavo Pimentel wrote:
> PCIe 5.0 allows an effective 32.0 GT/s speed per lane.
>
> Currently if you read a PCIe 5.0 EP link data rate through sysfs, the
> resulting output will be "Unknown speed" instead of "32.0 GT/s" as we
> would be expect.
>
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Applied to pci/enumeration for v5.3, thanks!
I reworded the commit log to emphasize that this only affects
*decoding* of the new speed; the actual *support* for operating at this
speed is in the hardware and needs no assistance from the OS.
PCI: Decode PCIe 32 GT/s link speed
PCIe r5.0, sec 7.5.3.18, defines a new 32.0 GT/s bit in the Supported Link
Speeds Vector of Link Capabilities 2. Decode this new speed. This does
not affect the speed of the link, which should be negotiated automatically
by the hardware; it only adds decoding when showing the speed to the user.
Previously, reading the speed of a link operating at this speed showed
"Unknown speed" instead of "32.0 GT/s".
> ---
> Changes:
> v1 -> v2
> - Rebase patch
>
> drivers/pci/pci-sysfs.c | 3 +++
> drivers/pci/pci.c | 4 +++-
> drivers/pci/probe.c | 2 +-
> drivers/pci/slot.c | 1 +
> include/linux/pci.h | 1 +
> include/uapi/linux/pci_regs.h | 4 ++++
> 6 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 6d27475..d52d304 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -182,6 +182,9 @@ static ssize_t current_link_speed_show(struct device *dev,
> return -EINVAL;
>
> switch (linkstat & PCI_EXP_LNKSTA_CLS) {
> + case PCI_EXP_LNKSTA_CLS_32_0GB:
> + speed = "32 GT/s";
> + break;
> case PCI_EXP_LNKSTA_CLS_16_0GB:
> speed = "16 GT/s";
> break;
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 8abc843..4729a7c 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5621,7 +5621,9 @@ enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev)
> */
> pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2);
> if (lnkcap2) { /* PCIe r3.0-compliant */
> - if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_16_0GB)
> + if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_32_0GB)
> + return PCIE_SPEED_32_0GT;
> + else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_16_0GB)
> return PCIE_SPEED_16_0GT;
> else if (lnkcap2 & PCI_EXP_LNKCAP2_SLS_8_0GB)
> return PCIE_SPEED_8_0GT;
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 0e8e2c1..c5f27c8 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -668,7 +668,7 @@ const unsigned char pcie_link_speed[] = {
> PCIE_SPEED_5_0GT, /* 2 */
> PCIE_SPEED_8_0GT, /* 3 */
> PCIE_SPEED_16_0GT, /* 4 */
> - PCI_SPEED_UNKNOWN, /* 5 */
> + PCIE_SPEED_32_0GT, /* 5 */
> PCI_SPEED_UNKNOWN, /* 6 */
> PCI_SPEED_UNKNOWN, /* 7 */
> PCI_SPEED_UNKNOWN, /* 8 */
> diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
> index f4d92b1..ae4aa0e 100644
> --- a/drivers/pci/slot.c
> +++ b/drivers/pci/slot.c
> @@ -75,6 +75,7 @@ static const char *pci_bus_speed_strings[] = {
> "5.0 GT/s PCIe", /* 0x15 */
> "8.0 GT/s PCIe", /* 0x16 */
> "16.0 GT/s PCIe", /* 0x17 */
> + "32.0 GT/s PCIe", /* 0x18 */
> };
>
> static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 4a5a84d..2173e6b 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -258,6 +258,7 @@ enum pci_bus_speed {
> PCIE_SPEED_5_0GT = 0x15,
> PCIE_SPEED_8_0GT = 0x16,
> PCIE_SPEED_16_0GT = 0x17,
> + PCIE_SPEED_32_0GT = 0x18,
> PCI_SPEED_UNKNOWN = 0xff,
> };
>
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index 2716476..f28e562 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -528,6 +528,7 @@
> #define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
> #define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */
> #define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */
> +#define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */
> #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
> #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
> #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
> @@ -556,6 +557,7 @@
> #define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
> #define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */
> #define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */
> +#define PCI_EXP_LNKSTA_CLS_32_0GB 0x0005 /* Current Link Speed 32.0GT/s */
> #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */
> #define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */
> #define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */
> @@ -661,6 +663,7 @@
> #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */
> #define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */
> #define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */
> +#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */
> #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
> #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
> #define PCI_EXP_LNKCTL2_TLS 0x000f
> @@ -668,6 +671,7 @@
> #define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */
> #define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */
> #define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */
> +#define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */
> #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
> #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
> #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-04 20:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-04 16:24 [PATCH v2] PCI: Add PCIe 5.0 data rate (32 GT/s) support Gustavo Pimentel
2019-06-04 20:26 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).