[PATCH v7 0/1] PCI: microchip: Add host driver for Microchip PCIe controller

[PATCH v7 0/1] PCI: microchip: Add host driver for Microchip PCIe controller

[Daire McNamara]

This v7 patch adds support for the Microchip PCIe PolarFire PCIe
controller when configured in host (Root Complex) mode.

Updates since v6:
* Refactored to use common eCAM driver
* Updated to CONFIG_PCIE_MICROCHIP_HOST etc
* Formatting improvements
* Removed code for selection between bridge 0 and 1

Updates since v5:
* Fixed Kconfig typo noted by Randy Dunlap
* Updated with comments from Bjorn Helgaas

Updates since v4:
* Fix compile issues.

Updates since v3:
* Update all references to Microsemi to Microchip
* Separate MSI functionality from legacy PCIe interrupt handling functionality

Updates since v2:
* Split out DT bindings and Vendor ID updates into their own patch
  from PCIe driver.
* Updated Change Log

Updates since v1:
* Incorporate feedback from Bjorn Helgaas

Daire McNamara (1):
  PCI: microchip: Add host driver for Microchip PCIe controller

 .../bindings/pci/microchip-pcie.txt           |  64 ++
 drivers/pci/controller/Kconfig                |   9 +
 drivers/pci/controller/Makefile               |   1 +
 drivers/pci/controller/pcie-microchip-host.c  | 702 ++++++++++++++++++
 4 files changed, 776 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/microchip-pcie.txt
 create mode 100644 drivers/pci/controller/pcie-microchip-host.c


base-commit: c0cc271173b2e1c2d8d0ceaef14e4dfa79eefc0d
--
2.17.1