linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: "Marek Behún" <kabel@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, pali@kernel.org,
	stable@vger.kernel.org, maz@kernel.org
Subject: Re: [PATCH 06/13] PCI: aardvark: Do not clear status bits of masked interrupts
Date: Mon, 4 Oct 2021 15:06:53 +0100	[thread overview]
Message-ID: <20211004140653.GB24914@lpieralisi> (raw)
In-Reply-To: <20211001195856.10081-7-kabel@kernel.org>

[+Marc - always better to have his eyes on IRQ handling code]

On Fri, Oct 01, 2021 at 09:58:49PM +0200, Marek Behún wrote:
> From: Pali Rohár <pali@kernel.org>
> 
> It is incorrect to clear status bits of masked interrupts.
> 
> The aardvark driver clears all status interrupt bits if no unmasked
> status bit is set. Masked bits should never be cleared.
> 
> Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Reviewed-by: Marek Behún <kabel@kernel.org>
> Signed-off-by: Marek Behún <kabel@kernel.org>
> Cc: stable@vger.kernel.org
> ---
>  drivers/pci/controller/pci-aardvark.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index d5d6f92e5143..e4986806a189 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -1295,11 +1295,8 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
>  	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
>  	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
>  
> -	if (!isr0_status && !isr1_status) {
> -		advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
> -		advk_writel(pcie, isr1_val, PCIE_ISR1_REG);

This looks fine - on the other hand if no interrupt is set in the status
registers (that are filtered with the masks) we are dealing with a
spurious IRQ right ? Just gauging how severe this is.

Lorenzo

> +	if (!isr0_status && !isr1_status)
>  		return;
> -	}
>  
>  	/* Process MSI interrupts */
>  	if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
> -- 
> 2.32.0
> 

  reply	other threads:[~2021-10-04 14:06 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-01 19:58 [PATCH 00/13] PCI: aardvark controller fixes Marek Behún
2021-10-01 19:58 ` [PATCH 01/13] PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros Marek Behún
2021-10-02 16:05   ` Bjorn Helgaas
2021-10-04  8:43   ` Lorenzo Pieralisi
2021-10-04  9:32     ` Marek Behún
2021-10-04  9:35       ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 02/13] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-10-03 17:44   ` Marek Behún
2021-10-01 19:58 ` [PATCH 03/13] PCI: aardvark: Don't spam about PIO Response Status Marek Behún
2021-10-01 19:58 ` [PATCH 04/13] PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge Marek Behún
2021-10-01 19:58 ` [PATCH 05/13] PCI: aardvark: Fix configuring Reference clock Marek Behún
2021-10-01 19:58 ` [PATCH 06/13] PCI: aardvark: Do not clear status bits of masked interrupts Marek Behún
2021-10-04 14:06   ` Lorenzo Pieralisi [this message]
2021-10-04 15:18     ` Marek Behún
2021-10-04 15:31     ` Marc Zyngier
2021-10-05 12:13       ` Marek Behún
2021-10-05 12:42         ` Marc Zyngier
2021-10-05 13:15           ` Pali Rohár
2021-10-05 15:42             ` Marc Zyngier
2021-10-05 18:48               ` Pali Rohár
2021-10-05 16:04             ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 07/13] PCI: aardvark: Do not unmask unused interrupts Marek Behún
2021-10-01 19:58 ` [PATCH 08/13] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Marek Behún
2021-10-01 19:58 ` [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response Marek Behún
2021-10-02 16:35   ` Bjorn Helgaas
2021-10-04  7:21     ` Marek Behún
2021-10-04  8:53       ` Lorenzo Pieralisi
2021-10-04 10:19         ` Marek Behún
2021-10-05 19:28           ` Bjorn Helgaas
2021-10-05 22:45             ` Marek Behún
2021-10-11 18:15               ` Usage of PCBIOS_* macros (Was: Re: [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response) Pali Rohár
2021-10-11 20:58                 ` Bjorn Helgaas
2021-10-06 16:29             ` [PATCH 09/13] PCI: aardvark: Implement re-issuing config requests on CRS response Lorenzo Pieralisi
2021-10-06 20:13               ` Bjorn Helgaas
2021-10-07 11:51                 ` Lorenzo Pieralisi
2021-10-07 12:36                   ` Marek Behún
2021-10-07 19:25                     ` Bjorn Helgaas
2021-10-01 19:58 ` [PATCH 10/13] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Marek Behún
2021-10-04  9:44   ` Lorenzo Pieralisi
2021-10-04  9:56     ` Marek Behún
2021-10-04 10:10       ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 11/13] PCI: aardvark: Fix link training Marek Behún
2021-10-01 19:58 ` [PATCH 12/13] PCI: aardvark: Fix checking for link up via LTSSM state Marek Behún
2021-10-04 13:35   ` Lorenzo Pieralisi
2021-10-01 19:58 ` [PATCH 13/13] PCI: aardvark: Fix reporting Data Link Layer Link Active Marek Behún
2021-10-04  9:53 ` [PATCH 00/13] PCI: aardvark controller fixes Lorenzo Pieralisi
2021-10-04 10:40   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211004140653.GB24914@lpieralisi \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=kabel@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=pali@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).