From: Auger Eric <eric.auger@redhat.com>
To: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
iommu@lists.linux-foundation.org,
virtualization@lists.linux-foundation.org,
devicetree@vger.kernel.org
Cc: linux-pci@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
peter.maydell@linaro.org, joro@8bytes.org, mst@redhat.com,
jasowang@redhat.com, robh+dt@kernel.org, mark.rutland@arm.com,
tnowicki@caviumnetworks.com, kevin.tian@intel.com,
marc.zyngier@arm.com, robin.murphy@arm.com, will.deacon@arm.com,
lorenzo.pieralisi@arm.com
Subject: Re: [PATCH v3 6/7] iommu/virtio: Add probe request
Date: Thu, 15 Nov 2018 14:20:53 +0100 [thread overview]
Message-ID: <df230fb1-7290-a6b0-b5b1-7a233c849257@redhat.com> (raw)
In-Reply-To: <20181012145917.6840-7-jean-philippe.brucker@arm.com>
Hi Jean,
On 10/12/18 4:59 PM, Jean-Philippe Brucker wrote:
> When the device offers the probe feature, send a probe request for each
> device managed by the IOMMU. Extract RESV_MEM information. When we
> encounter a MSI doorbell region, set it up as a IOMMU_RESV_MSI region.
> This will tell other subsystems that there is no need to map the MSI
> doorbell in the virtio-iommu, because MSIs bypass it.
>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
> ---
> drivers/iommu/virtio-iommu.c | 147 ++++++++++++++++++++++++++++--
> include/uapi/linux/virtio_iommu.h | 39 ++++++++
> 2 files changed, 180 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
> index 9fb38cd3b727..8eaf66770469 100644
> --- a/drivers/iommu/virtio-iommu.c
> +++ b/drivers/iommu/virtio-iommu.c
> @@ -56,6 +56,7 @@ struct viommu_dev {
> struct iommu_domain_geometry geometry;
> u64 pgsize_bitmap;
> u8 domain_bits;
> + u32 probe_size;
> };
>
> struct viommu_mapping {
> @@ -77,8 +78,10 @@ struct viommu_domain {
> };
>
> struct viommu_endpoint {
> + struct device *dev;
> struct viommu_dev *viommu;
> struct viommu_domain *vdomain;
> + struct list_head resv_regions;
> };
>
> struct viommu_request {
> @@ -129,6 +132,9 @@ static off_t viommu_get_req_offset(struct viommu_dev *viommu,
> {
> size_t tail_size = sizeof(struct virtio_iommu_req_tail);
>
> + if (req->type == VIRTIO_IOMMU_T_PROBE)
> + return len - viommu->probe_size - tail_size;
> +
> return len - tail_size;
> }
>
> @@ -414,6 +420,101 @@ static int viommu_replay_mappings(struct viommu_domain *vdomain)
> return ret;
> }
>
> +static int viommu_add_resv_mem(struct viommu_endpoint *vdev,
> + struct virtio_iommu_probe_resv_mem *mem,
> + size_t len)
> +{
> + struct iommu_resv_region *region = NULL;
> + unsigned long prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
> +
nit: extra void line
> + u64 start = le64_to_cpu(mem->start);
> + u64 end = le64_to_cpu(mem->end);
> + size_t size = end - start + 1;
> +
> + if (len < sizeof(*mem))
> + return -EINVAL;
> +
> + switch (mem->subtype) {
> + default:
> + dev_warn(vdev->dev, "unknown resv mem subtype 0x%x\n",
> + mem->subtype);
> + /* Fall-through */
> + case VIRTIO_IOMMU_RESV_MEM_T_RESERVED:
> + region = iommu_alloc_resv_region(start, size, 0,
> + IOMMU_RESV_RESERVED);
need to test region
> + break;
> + case VIRTIO_IOMMU_RESV_MEM_T_MSI:
> + region = iommu_alloc_resv_region(start, size, prot,
> + IOMMU_RESV_MSI);
same
> + break;
> + }
> +
> + list_add(&vdev->resv_regions, ®ion->list);
> + return 0;
> +}
> +
> +static int viommu_probe_endpoint(struct viommu_dev *viommu, struct device *dev)
> +{
> + int ret;
> + u16 type, len;
> + size_t cur = 0;
> + size_t probe_len;
> + struct virtio_iommu_req_probe *probe;
> + struct virtio_iommu_probe_property *prop;
> + struct iommu_fwspec *fwspec = dev->iommu_fwspec;
> + struct viommu_endpoint *vdev = fwspec->iommu_priv;
> +
> + if (!fwspec->num_ids)
> + return -EINVAL;
> +
> + probe_len = sizeof(*probe) + viommu->probe_size +
> + sizeof(struct virtio_iommu_req_tail);
> + probe = kzalloc(probe_len, GFP_KERNEL);
> + if (!probe)
> + return -ENOMEM;
> +
> + probe->head.type = VIRTIO_IOMMU_T_PROBE;
> + /*
> + * For now, assume that properties of an endpoint that outputs multiple
> + * IDs are consistent. Only probe the first one.
> + */
> + probe->endpoint = cpu_to_le32(fwspec->ids[0]);
> +
> + ret = viommu_send_req_sync(viommu, probe, probe_len);
> + if (ret)
> + goto out_free;
> +
> + prop = (void *)probe->properties;
> + type = le16_to_cpu(prop->type) & VIRTIO_IOMMU_PROBE_T_MASK;
> +
> + while (type != VIRTIO_IOMMU_PROBE_T_NONE &&
> + cur < viommu->probe_size) {
> + len = le16_to_cpu(prop->length) + sizeof(*prop);
> +
> + switch (type) {
> + case VIRTIO_IOMMU_PROBE_T_RESV_MEM:
> + ret = viommu_add_resv_mem(vdev, (void *)prop, len);
> + break;
> + default:
> + dev_err(dev, "unknown viommu prop 0x%x\n", type);
> + }
> +
> + if (ret)
> + dev_err(dev, "failed to parse viommu prop 0x%x\n", type);
> +
> + cur += len;
> + if (cur >= viommu->probe_size)
> + break;
> +
> + prop = (void *)probe->properties + cur;
> + type = le16_to_cpu(prop->type) & VIRTIO_IOMMU_PROBE_T_MASK;
> + }
> +
> +out_free:
> + kfree(probe);
> + return ret;
> +}
> +
> /* IOMMU API */
>
> static struct iommu_domain *viommu_domain_alloc(unsigned type)
> @@ -636,15 +737,33 @@ static void viommu_iotlb_sync(struct iommu_domain *domain)
>
> static void viommu_get_resv_regions(struct device *dev, struct list_head *head)
> {
> - struct iommu_resv_region *region;
> + struct iommu_resv_region *entry, *new_entry, *msi = NULL;
> + struct viommu_endpoint *vdev = dev->iommu_fwspec->iommu_priv;
> int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
>
> - region = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH, prot,
> - IOMMU_RESV_SW_MSI);
> - if (!region)
> - return;
> + list_for_each_entry(entry, &vdev->resv_regions, list) {
> + /*
> + * If the device registered a bypass MSI windows, use it.
any bypass MSI windows?
> + * Otherwise add a software-mapped region
> + */
> + if (entry->type == IOMMU_RESV_MSI)
> + msi = entry;
> +
> + new_entry = kmemdup(entry, sizeof(*entry), GFP_KERNEL);
> + if (!new_entry)
> + return;
> + list_add_tail(&new_entry->list, head);
> + }
> +
> + if (!msi) {
> + msi = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH,
> + prot, IOMMU_RESV_SW_MSI);
> + if (!msi)
> + return;
> +
> + list_add_tail(&msi->list, head);
> + }
>
> - list_add_tail(®ion->list, head);
> iommu_dma_get_resv_regions(dev, head);
> }
>
> @@ -692,9 +811,18 @@ static int viommu_add_device(struct device *dev)
> if (!vdev)
> return -ENOMEM;
>
> + vdev->dev = dev;
> vdev->viommu = viommu;
> + INIT_LIST_HEAD(&vdev->resv_regions);
> fwspec->iommu_priv = vdev;
>
> + if (viommu->probe_size) {
> + /* Get additional information for this endpoint */
> + ret = viommu_probe_endpoint(viommu, dev);
> + if (ret)
leaks vdev
> + return ret;
> + }
> +
> ret = iommu_device_link(&viommu->iommu, dev);
> if (ret)
> goto err_free_dev;
> @@ -717,6 +845,7 @@ static int viommu_add_device(struct device *dev)
> iommu_device_unlink(&viommu->iommu, dev);
>
> err_free_dev:
> + viommu_put_resv_regions(dev, &vdev->resv_regions);
> kfree(vdev);
>
> return ret;
> @@ -734,6 +863,7 @@ static void viommu_remove_device(struct device *dev)
>
> iommu_group_remove_device(dev);
> iommu_device_unlink(&vdev->viommu->iommu, dev);
> + viommu_put_resv_regions(dev, &vdev->resv_regions);
> kfree(vdev);
> }
>
> @@ -832,6 +962,10 @@ static int viommu_probe(struct virtio_device *vdev)
> struct virtio_iommu_config, domain_bits,
> &viommu->domain_bits);
>
> + virtio_cread_feature(vdev, VIRTIO_IOMMU_F_PROBE,
> + struct virtio_iommu_config, probe_size,
> + &viommu->probe_size);
> +
> viommu->geometry = (struct iommu_domain_geometry) {
> .aperture_start = input_start,
> .aperture_end = input_end,
> @@ -913,6 +1047,7 @@ static unsigned int features[] = {
> VIRTIO_IOMMU_F_MAP_UNMAP,
> VIRTIO_IOMMU_F_DOMAIN_BITS,
> VIRTIO_IOMMU_F_INPUT_RANGE,
> + VIRTIO_IOMMU_F_PROBE,
> };
>
> static struct virtio_device_id id_table[] = {
> diff --git a/include/uapi/linux/virtio_iommu.h b/include/uapi/linux/virtio_iommu.h
> index e808fc7fbe82..feed74586bb0 100644
> --- a/include/uapi/linux/virtio_iommu.h
> +++ b/include/uapi/linux/virtio_iommu.h
> @@ -14,6 +14,7 @@
> #define VIRTIO_IOMMU_F_DOMAIN_BITS 1
> #define VIRTIO_IOMMU_F_MAP_UNMAP 2
> #define VIRTIO_IOMMU_F_BYPASS 3
> +#define VIRTIO_IOMMU_F_PROBE 4
>
> struct virtio_iommu_config {
> /* Supported page sizes */
> @@ -25,6 +26,9 @@ struct virtio_iommu_config {
> } input_range;
> /* Max domain ID size */
> __u8 domain_bits;
> + __u8 padding[3];
> + /* Probe buffer size */
> + __u32 probe_size;
> };
>
> /* Request types */
> @@ -32,6 +36,7 @@ struct virtio_iommu_config {
> #define VIRTIO_IOMMU_T_DETACH 0x02
> #define VIRTIO_IOMMU_T_MAP 0x03
> #define VIRTIO_IOMMU_T_UNMAP 0x04
> +#define VIRTIO_IOMMU_T_PROBE 0x05
>
> /* Status types */
> #define VIRTIO_IOMMU_S_OK 0x00
> @@ -98,4 +103,38 @@ struct virtio_iommu_req_unmap {
> struct virtio_iommu_req_tail tail;
> };
>
> +#define VIRTIO_IOMMU_PROBE_T_NONE 0
> +#define VIRTIO_IOMMU_PROBE_T_RESV_MEM 1
> +
> +#define VIRTIO_IOMMU_PROBE_T_MASK 0xfff
> +
> +struct virtio_iommu_probe_property {
> + __le16 type;
> + __le16 length;
> +};
> +
> +#define VIRTIO_IOMMU_RESV_MEM_T_RESERVED 0
> +#define VIRTIO_IOMMU_RESV_MEM_T_MSI 1
> +
> +struct virtio_iommu_probe_resv_mem {
> + struct virtio_iommu_probe_property head;
> + __u8 subtype;
> + __u8 reserved[3];
> + __le64 start;
> + __le64 end;
> +};
> +
> +struct virtio_iommu_req_probe {
> + struct virtio_iommu_req_head head;
> + __le32 endpoint;
> + __u8 reserved[64];
> +
> + __u8 properties[];
> +
> + /*
> + * Tail follows the variable-length properties array. No padding,
> + * property lengths are all aligned on 8 bytes.
> + */
> +};
> +
> #endif
>
Thanks
Eric
next prev parent reply other threads:[~2018-11-15 13:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 14:59 [PATCH v3 0/7] Add virtio-iommu driver Jean-Philippe Brucker
2018-10-12 14:59 ` [PATCH v3 1/7] dt-bindings: virtio-mmio: Add IOMMU description Jean-Philippe Brucker
2018-10-18 0:30 ` Rob Herring
2018-11-15 8:45 ` Auger Eric
2018-10-12 14:59 ` [PATCH v3 2/7] dt-bindings: virtio: Add virtio-pci-iommu node Jean-Philippe Brucker
2018-10-18 0:35 ` Rob Herring
2018-11-15 8:45 ` Auger Eric
2018-10-12 14:59 ` [PATCH v3 3/7] PCI: OF: Allow endpoints to bypass the iommu Jean-Philippe Brucker
2018-10-12 19:41 ` Bjorn Helgaas
2018-10-15 10:52 ` Michael S. Tsirkin
2018-10-15 19:46 ` Jean-philippe Brucker
2018-10-17 15:14 ` Michael S. Tsirkin
2018-10-18 10:47 ` Robin Murphy
2018-10-22 11:27 ` Jean-Philippe Brucker
2018-10-15 11:32 ` Robin Murphy
2018-10-15 19:45 ` Jean-philippe Brucker
2018-10-12 14:59 ` [PATCH v3 4/7] PCI: OF: Initialize dev->fwnode appropriately Jean-Philippe Brucker
2018-10-12 19:44 ` Bjorn Helgaas
2018-10-12 14:59 ` [PATCH v3 5/7] iommu: Add virtio-iommu driver Jean-Philippe Brucker
2018-10-12 16:35 ` Michael S. Tsirkin
2018-10-12 18:54 ` Jean-Philippe Brucker
2018-11-08 14:51 ` Auger Eric
2018-11-08 16:46 ` Jean-Philippe Brucker
2018-10-12 14:59 ` [PATCH v3 6/7] iommu/virtio: Add probe request Jean-Philippe Brucker
2018-10-12 16:42 ` Michael S. Tsirkin
2018-11-08 14:48 ` Auger Eric
2018-11-08 16:46 ` Jean-Philippe Brucker
2018-11-15 13:20 ` Auger Eric [this message]
2018-11-15 16:22 ` Jean-Philippe Brucker
2018-10-12 14:59 ` [PATCH v3 7/7] iommu/virtio: Add event queue Jean-Philippe Brucker
2018-10-12 17:00 ` [PATCH v3 0/7] Add virtio-iommu driver Michael S. Tsirkin
2018-10-12 18:55 ` Jean-Philippe Brucker
2018-10-16 9:25 ` Auger Eric
2018-10-16 18:44 ` Jean-Philippe Brucker
2018-10-16 20:31 ` Auger Eric
2018-10-17 11:54 ` Jean-Philippe Brucker
2018-10-17 15:23 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df230fb1-7290-a6b0-b5b1-7a233c849257@redhat.com \
--to=eric.auger@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jasowang@redhat.com \
--cc=jean-philippe.brucker@arm.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=tnowicki@caviumnetworks.com \
--cc=virtualization@lists.linux-foundation.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).